Work Of Augmentation Of Rural Water Supply Scheme Naugaon Tehsil Ramgarh Block Ramgarh District Alwarincluding 02 Years Defect Liability Period On Single Point Responsibility Basis Under Spmrm
Tender Value
88.63 Lakhs
Estimated cost
Bid Submission
23 Jun 2021
0 days left
EMD
88630
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Naugaon → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Work Of Augmentation Of Rural Water Supply Scheme Naugaon Tehsil Ramgarh Block Ramgarh District Alwarincluding 02 Years Defect Liability Period On Single Point Responsibility Basis Under Spmrm
BOQ
| NAME OF WORK: AUGMENTATION OF RURAL WATER SUPPLY SCHEME NAUGAON TEHSIL RAMGARH BLOCK RAMGARH DISTT.ALWAR | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Construction of tube well from ground level and up to 100 mtr depth and above to accommodate housing assembly pipe in all type of unconsolidated formation such as pebbles, boulders, collapsible formation etc. by Odex drilling method as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications. The work will include lowering of housing and strainer pipe assembly and casing shoe incuding cost of casing shoe, but excluding cost of the casing pipe. The work would be completed after obtaining sand free water. Nominal bore 200 mm dia. | BI01010001010000000000000515BI0100001234 | 180 | RM |
| 2 | 2 | Construction of tube well after completion of drilling by rotary method & upto 150 mtr. depth in all type of rocks by DTH system as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications. The work shall be deemed completed only after obtaining sand free water. The bore well should have a throughout nominal size bore beyond casing pipe. Nominal bore 200 mm dia. | BI01010001010000000000000515BI0100005678 | 120 | RM |
| 3 | 3 | Add 15% extra on depth more than 150 mtr for drilling beyond 150 mtr depth from ground level. | BI01010001010000000000000515BI010000111110 | 200 | RM |
| 4 | 4 | Labour charges for making slots on blank pipes made of ERW MS black pipe of following sizes, the slotting should be as per IS:8110-2000 or as amended up to date. 200 mm dia nominal bore. | BI01010001010000000000000515BI0100001120 | 36 | RM |
| 5 | 5 | Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2\" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. 200 mm. dia. | BI01010001010000000000000515BI0100001119 | 2 | Nos. |
| 6 | 6 | Supply & Installation of 3 phase ISI marked submersible motor pump set of five star rating by BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.9.3 KW (12.5 HP) head avoce 120 mtr | BI01010001010000000000000515BI0100001128 | 37.2 | kw |
| 7 | 7 | Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc. | BI01010001010000000000000515BI0100001131 | ||
| 8 | 7.1 | 3 core 4.00mm2 | BI01010001010000000000000515BI0100001199 | 600 | Mtr |
| 9 | 8 | Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 16.0 Sq.mm, 4 core. | BI01010001010000000000000515BI0100001133 | ||
| 10 | 8.1 | 16Sqmm 4 core | BI01010001010000000000000515BI0100001134 | 60 | Mtr |
| 11 | 9 | Providing & Lowering in tubewell ISI marked GI Pipe “B\" (medium) class as per IS:1239 part I 2004 or amended up to date, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. 50 mm dia | BI01010001010000000000000515BI0100001135 | ||
| 12 | 9.1 | 50 mm dia | BI01010001010000000000000515BI0100001136 | 260 | RM |
| 13 | 10 | Providing & laying ISI marked GI Pipe “A” class as per IS:1239 part I 2004 or amended up to date for casing pipe for submersible cable external/internal work 40 mm dia complete in all respect. | BI01010001010000000000000515BI0100001137 | 40 | Mtr |
| 14 | 11 | Providing & Fixing of double flanged, CI body, ISI marked NRV of approved make of following sizes 80 mm dia. | BI01010001010000000000000515BI0100001138 | ||
| 15 | 11.1 | 80 mm | BI01010001010000000000000515BI0100001139 | 2 | Nos. |
| 16 | 12 | Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. \nNote: Rates are exclusive of tail piece/ dismantling joints and earth work.\nManually Operated CI Sluice valve of Class PN-1.0 , 80mm HW | BI01010001010000000000000515BI010000111111 | 2 | Nos. |
| 17 | 13 | Providing & Lowering in tube well ISI marked GI Pipe “B\" class as per IS:1239 or amended up to date threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. 80mm Dia | BI01010001010000000000000515BI0100001222 | 12 | Mtr |
| 18 | 14 | Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to 10 kg. including all jointing material as per specification with safety cover. | BI01010001010000000000000515BI01000013333 | 2 | Nos. |
| 19 | 15 | Providing, installing, testing and commissioning of double flanged bulk flow meter with removable mechanism, of class B conforming to ISO 4064/1 or amended upto date of approved make including cost of all material and labour as per specifications with GI Box (sheet 16 SWG) suitable with locking arrangement of following dia. 65 mm dia | BI01010001010000000000000515BI0100001142 | 2 | Nos. |
| 20 | 16 | Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventor, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 guage M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18\" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form.The size of CC plateform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for 440 Volt AC Supply. | BI01010001010000000000000515BI0100001143 | ||
| 21 | 16.1 | above 10 HP & up to 15.0 HP | BI01010001010000000000000515BI0100001196 | 2 | Nos. |
| 22 | 17 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. \n | BI01010001010000000000000515BI0100001197 | 2 | Nos. |
| 23 | 18 | Providing & Fixing pump safety cage as per specifications or as directed by Engineer in charge. | BI01010001010000000000000515BI0100001146 | 2 | Nos. |
| 24 | 19 | Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.\nM20 grade Nominal Mix\n1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm\nnominal size). | BI01010001010000000000000515BI0100004444 | 0.6 | cum |
| 25 | 20 | Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to date of following sizes. 200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m) | BI01010001010000000000000515BI0100005555 | 182 | Mtr |
AI Tender Summary
Tender Timeline
Jun 03, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 23, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 24, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender