Renovation Of Interiors And Replacement Of Furniture For Administrative Buildings At Bangalore ( Devanagonthi ) Terminal And Gulburga Depot , Karnataka
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Jun 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Auction
Location / State
IOCL GULBARGA DEPOT AND DEVANGONTHI TERMINAL → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Interiors And Replacement Of Furniture For Administrative Buildings At Bangalore ( Devanagonthi ) Terminal And Gulburga Depot , Karnataka
BOQ
| Name of Work : Renovation of Interiors and replacement of Furniture for Administrative Buildings at Bangalore(Devanagonthi) Terminal and Gulburga Depot, Karnataka | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Part-A: BANGALORE (DEVANAGONTHI) TERMINAL | BI01010001010000000000000515BI0100001113 | ||
| 2 | 2 | CONSTRUCTION WORKS-CIVIL WORKS | BI01010001010000000000000515BI0100001114 | ||
| 3 | 3 | Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand) in superstructure in all shapes & sizes in superstructure ABOVE PLINTH & UP TO FLOOR V LEVEL | BI01010001010000000000000515BI0100001115 | 15 | M2 |
| 4 | 4 | Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:3 (1 cement:3 coarse sand) IN superstructure ABOVE PLINTH level & UP TO FLOOR V LEVEL | BI01010001010000000000000515BI0100001116 | 55 | M2 |
| 5 | 5 | CONSTRUCTION WORKS- PARTITION GLASS | BI01010001010000000000000515BI0100001117 | ||
| 6 | 6 | Providing & fixing partition upto ceiling height consisting of G.I. frame & required board including providing & fixing of frame work made of special section power pressed/ roll form GI sheet with zinc coating 120gm/sqm(both side inclusive) consisting of floor and ceiling channel 50mm wide having equal flanges of 32mm & 0.50mm thick fixed to the floor & ceiling at the spacing of 610mm centre to centre with dash fastener of 12.5mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48mm wide having one flange of 34 mm and other flange 36mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610mm centre to centre by 6mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with Zinc Coating of 120gm/sqm (both sides inclusive) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mmx 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete | BI01010001010000000000000515BI0100001118 | ||
| 7 | 7 | 75 mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3:1996 (Board With BIS Certification Marks). | BI01010001010000000000000515BI0100001119 | 85 | M2 |
| 8 | 8 | CONSTRUCTION WORKS- GRANITE | BI01010001010000000000000515BI0100001120 | ||
| 9 | 9 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade having Area of slab over 0.50 sqm | BI01010001010000000000000515BI0100001121 | 5 | M2 |
| 10 | 10 | Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters & similar location in marble/Granite/stone work including necessary holes for pillar taps etc.including rubbing and polishing of cut edges etc.complete | BI01010001010000000000000515BI0100001122 | 1 | EA |
| 11 | 11 | TILE LAYING | BI01010001010000000000000515BI0100001123 | ||
| 12 | 12 | INTERIOR SPACES | BI01010001010000000000000515BI0100001124 | ||
| 13 | 13 | Supply, fixing and installation of Luxury Vinyl tile (LVT) of various sizes, patterns, Colours and shades with wear layer 0.5mm thick minimum & overall thickness of minimum 3mm +/-0.5mm, should be antistatic, Antiskid, anti microbal properties, resistance to chemicals, light and heat complete as per manufacturer specification with Warranty of 10years including the cost of low VOC adhesive. Approved makes are Trysquare, Pergo and Squarefoot. \n | BI01010001010000000000000515BI0100001125 | 260 | M2 |
| 14 | 14 | Supply, fixing and installation of 75 mm laminated wooden skirting/ profile/ transition trim of 8 mm to 15 mm thick, profile over the laminated wooden flooring with cutting adges in required angles to turn the profile in required angles as per the room and necessary consumables viz. adhesive, necessary hardware,etc. (Approved makes are Trysquare/ Pergo/ Squarefoot). \n | BI01010001010000000000000515BI0100001126 | 10 | M |
| 15 | 15 | Supply, fixing and installation of 100mm aluminium skirting of hairline finish with clip system by fixing the base frame with screws and necessary fastners to the partition walls / floor etc. \n | BI01010001010000000000000515BI0100001127 | 10 | M |
| 16 | 16 | Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI(solar refractive index) > 78,solar reflection >0.70 & initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete,including providing skirting upto 150mm height along the parapet walls in the same manner. | BI01010001010000000000000515BI0100001128 | 260 | M2 |
| 17 | 17 | TerraceDismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within premises | BI01010001010000000000000515BI0100001129 | 470 | M2 |
| 18 | 18 | FOR TOILETS | BI01010001010000000000000515BI0100001130 | ||
| 19 | 19 | Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete. | BI01010001010000000000000515BI0100001131 | 46 | M2 |
| 20 | 20 | wall tiles of ceramic glazed tiles of 300 x 300 mm size | BI01010001010000000000000515BI0100001132 | 125 | M2 |
| 21 | 21 | CEILING WORKS | BI01010001010000000000000515BI0100001133 | ||
| 22 | 22 | Providing & Fixing 15mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone/cosmos / Hexa or equivalent) of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minimum) sheet, spaced 1200mm centre to centre, and cross \"T\" of size 24x28mm made out of 0.33mm (Minimum) sheet, 1200mm long spaced between main'T' at 600mm centre to centre to form a grid of 1200x600mm and secondary cross 'T' of length 600mm and size 24 x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600mm panel to from grid of size 600x600mm resting on periphery walls / partitions on Perimeter wall angle pre- coated steel of size(24x24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture (Spintone/Cosmos/hexa) in the grid including,cutting/ making opening for services like diffusers, grills,light fittings, fixtures,smoke detectors etc., wherever required, Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm ceiling with 12.5 mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanised steel level clips of size 85x30x0.8 mm spaced at 1200mm centre to centre along main'T', bottom exposed with 24mm of all T-sections shall be pre-painted with polyester baked paint for all heights,as per specifications,drawings & as directed by engineer-in- charge. | BI01010001010000000000000515BI0100001134 | 320 | M2 |
| 23 | 23 | Acoustic Perforated Gypsum False Ceiling: \nSupply, fixing and installation of tiled false ceiling of specified materials of size 600x600/ 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by PMC/Client. 15 mm thick perforated Gypsum board materialswith minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm, of size 600x600/ 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.85. (Make : Gyproc/ Armstrong/ Gypcore/ Gypsoman) The rate inclusive of all required materials, providing & removing of necessary scaffolding work.\nNOTE: Only false ceiling area will be measured from wall to wall. And no deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm. \n | BI01010001010000000000000515BI0100001135 | 27 | M2 |
| 24 | 24 | WORKSTATION\nGodrej Xpress Office Penta ( Work Station)\n Supply and installtion of Work Station Godrej Xpress Office Penta Size 5'*5'\nXpress Office consist of Keyboard tray , CPU trolley, & Pedestal | BI01010001010000000000000515BI0100001136 | 2 | Nos. |
| 25 | 25 | DOORS AND WINDOWS | BI01010001010000000000000515BI0100001137 | ||
| 26 | 26 | i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections | BI01010001010000000000000515BI0100001138 | 70 | KG |
| 27 | 27 | Extra for providing heavy sheet float glass panes of 5mm thickness instead of ordinary 4mm thick float glass in glazed doors, windows & clerestory window shutters.(Area of opening for glass panes excluding portion inside rebate shall be measured) | BI01010001010000000000000515BI0100001139 | 35 | M2 |
| 28 | 28 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). | BI01010001010000000000000515BI0100001140 | 108 | M2 |
| 29 | 29 | Labour for fabrication of uPVC extruded casement/ sliding windows and doors including drilling holes, fixing of fittings & hardwares, hire charges of drill machine and electricity charges etc. | BI01010001010000000000000515BI0100001141 | 10 | M2 |
| 30 | 30 | Labour for installation of uPVC extruded casement/ sliding windows and doors including scaffolding | BI01010001010000000000000515BI0100001142 | 10 | M2 |
| 31 | 31 | ELECTRICAL WORKS | BI01010001010000000000000515BI0100001143 | ||
| 32 | 32 | Supply, fixing, testing and commissioning of 18W LED SURFACE/RECESS MOUNTED DOWNLIGHTER WITH 1200LM, 6500K, SIMILAR TO PHILIPS CAT. No. SM250 LED12S 6500 PSU lighting luminaries with all other necessary accessories Complete.\n\nSamples to be submitted and get approval fom IOCL/ Consultant before procurement\nFor LED light fittings, the complete luminaries should have a warranty for 5 years which includes the housing + LED + Driver . \nThe optic shall be diffuser. The system efficacy shall not be less than 100lm/W. Luminaries thickness shall not be greater than 35mm, surge protection of 2.5kV and operating voltage of 140 - 270V. SDCM<5. The burning hours of the LED luminaries shall be 30,000 hours @L70. The CRI of the luminaries shall be >80. \n | BI01010001010000000000000515BI0100001144 | 41 | EA |
| 33 | 33 | LED Tube light : 18 W with IP65 protection | BI01010001010000000000000515BI0100001145 | 2 | EA |
| 34 | 34 | Supply, Installation, Testing & Commissiong of 38W, 3200 Lumens LED 1200X 300 mm Recess mounted light fittings with integral driver of same make and mimuim IP20 Rated with inbuilt Polycarbonate diffuser complete with all its accessories Philips Model RC380B LED32S-6500 L120W30 PSU OD or equivalent make. | BI01010001010000000000000515BI0100001146 | 16 | EA |
| 35 | 35 | Supply, fixing, testing and commissioning of the following lighting luminaries with all other necessary accessories\n12W LED SURFACE/RECESS MOUNTED DOWNLIGHTER WITH 1200LM, 6500K, SIMILAR TO PHILIPS CAT. No. SM250 LED12S 6500 PSU.\nSamples to be submitted and get approval fom Architect / Consultant before procurement\nFor LED light fittings, the complete luminaries should have a warranty for 5 years which includes the housing + LED + Driver . \nThe optic shall be diffuser. The system efficacy shall not be less than 100lm/W. Luminaries thickness shall not be greater than 35mm, surge protection of 2.5kV and operating voltage of 140 - 270V. SDCM<5. The burning hours of the LED luminaries shall be 30,000 hours @L70. The CRI of the luminaries shall be >80. \n | BI01010001010000000000000515BI0100001147 | 4 | EA |
| 36 | 36 | Supply, fixing, testing and commissioning of 2 nos. 6A, 240V, 3 pin modular type socket controlled by 2 nos 6A switch with suitable size front plate and metal box in recessed system. The job include terminations through proper jointing materials all complete civil works like Chipping Chasing & rough plastering and all other necessary Accessories for the following Make of Insulated wires shall be as per approved make.\n | BI01010001010000000000000515BI0100001148 | 24 | EA |
| 37 | 37 | SWITCHES, FUSES, MCBS, ELCBS ETC\n Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge.\nx) 15 A 6 Pin Modular socket\n | BI01010001010000000000000515BI0100001149 | 5 | EA |
| 38 | 38 | Supplying and fixing Telephone Socket Outlet with modular plate switch box including connections but including modular plate etc. as required. The job include terminations through proper jointing materials all complete civil works like Chipping Chasing & rough plastering and all other necessary Accessories for the following Make of Insulated wires shall be as per approved make | BI01010001010000000000000515BI0100001150 | 12 | EA |
| 39 | 39 | MCB DISTRIBUTION BOARD INCLUSIVE OF SINGLE PHASE MCB\nSupply & fixing of MCB Distribution Board double door type, IP-42, inclusive of MCB, Single Phase, as per approved make of following types with all accessories such as tinned copper busbars, neutral link, earth bar, din bar, knockouts, interconnections, earth studs,\netc. (MCB - 10KA Breaking Capacity) | BI01010001010000000000000515BI0100001151 | ||
| 40 | 40 | i) 8way DB with 32ADP as incoming-1No.& 6 to16A SP as outgoing-8Nos | BI01010001010000000000000515BI0100001152 | 4 | EA |
| 41 | 41 | TV CABLING :\nSupplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.\n | BI01010001010000000000000515BI0100001153 | 85 | M |
| 42 | 42 | Supply, installation, testing & commissioning of INLINE Type freshAir/Exhaust fans of specified CFM and static pressure of 25mm, suitable for Indoor installation as per specification for Fresh Air/Exhaust. \nCapacity :1000 CFM | BI01010001010000000000000515BI0100001154 | 5 | EA |
| 43 | 43 | Supply & Installation Sterio Amplifie (Crown/QSC/Bosch) The item includes supply of the afore-mentioned item as per the tender specification and approved makes. No deviation in the approved make is permitted.\nVendor to submit data-sheet for approval for dispatch clearance of the subject item.\nSpecification of the Item :\n1. Rated Output - Min. 440W per channel 2. Frequency Response - Min. + 0 dB, -1 dB (at 1W, 20 Hz - 20 kHz) 3. Sensitivity - Min. 1.4Vrms (for full rated power at 4 ohms) 4. Signal To Noise Ratio (A-weighted) - >103 dB (rated as dBr to full rated 8 ohm power output) 5. THD > 0.5%\n6. Intermodulation Distortion (60 Hz and 7 kHz at 4:1, from full rated output to -30 dB) <0.3% 7. Damping Factor - (8 ohms, 10 Hz to 400 Hz) >200 8. Crosstalk (below rated power) 20 Hz to 1 kHz - >85 dB, >55 dB 9. Input Impedance (nominal) - 20k ohms balanced, 10k ohms unbalanced 10. Load Impedance - 2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono | BI01010001010000000000000515BI0100001155 | 2 | EA |
| 44 | 44 | Ceiling Speakers\nSupply , installation , testing and commissioning of Ceiling Flush Music/PA Loudspeaker: Free field Frequency range (-10dB) of 80Hz to 16kHz; Power handling of 64 Watt peak; Nominal dispersion of 110 Conical; Free field Sensitivity of 84 dB SPL and Max SPL of 103 dB SPL peak; Nominal Impedance 8 Ohms; Integral multi-tap Transformer with tap EAtings of 2/4/8/16 W @ 100V. with Powder-coated steel grille; Shall include necessary standard hardware for ceiling install. \n | BI01010001010000000000000515BI0100001156 | 6 | EA |
| 45 | 45 | Supply & installation Samsung LED TV 55\" of Series 5 or equivalent make & model with remote. Supplietd TV shoud be WiFi enabled smart TV. Complete with Fixing on Bracket(Wall Mounted or ceiling Mounted) Complete as may be directed by EIC. | BI01010001010000000000000515BI0100001157 | 3 | EA |
| 46 | 46 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. | BI01010001010000000000000515BI0100001158 | 77 | EA |
| 47 | 47 | MINIATURE CIRCUIT BREAKERS (MCB) Supplying & fixing of Miniature Circuit Breakers as per approved make of 10KA Breaking cpacity of following ratings | BI01010001010000000000000515BI0100001159 | ||
| 48 | 48 | 6A to 32A SP MCB | BI01010001010000000000000515BI0100001160 | 40 | EA |
| 49 | 49 | 32Amp TPN switch fuse unit | BI01010001010000000000000515BI0100001161 | 10 | EA |
| 50 | 50 | 63Amp TPN switch fuse unit | BI01010001010000000000000515BI0100001162 | 5 | EA |
| 51 | 51 | 100Amp TPN switch fuse unit | BI01010001010000000000000515BI0100001163 | 1 | EA |
| 52 | 52 | MCB DISTRIBUTION BOARD INCLUSIVE OF SINGLE PHASE MCB Supply & fixing of MCB Distribution Board double door type, IP-42, inclusive of MCB, Single Phase, as per approved make of following types with all accessories such as tinned copper busbars, neutral link, earth bar, din bar, knockouts, interconnections, earth studs, etc. (MCB - 10KA Breaking Capacity) | BI01010001010000000000000515BI0100001164 | ||
| 53 | 53 | 8way DB with 32ADP as incoming-1No.& 6 to16A SP as outgoing-8Nos | BI01010001010000000000000515BI0100001165 | 4 | EA |
| 54 | 54 | 12 way DB with 32A DP as incoming-1No.& 6to16ASP as outgoing-12No | BI01010001010000000000000515BI0100001166 | 1 | EA |
| 55 | 55 | DISMANTL. OF ELECT. FITTING / FIXTURE | BI01010001010000000000000515BI0100001167 | ||
| 56 | 56 | DISMENTLING ELE CABLE OF ALL SIZE AG/UG | BI01010001010000000000000515BI0100001168 | 500 | M |
| 57 | 57 | DISMEN. DPS BOARD ALL TYPE WITH/WO STAND | BI01010001010000000000000515BI0100001169 | 40 | EA |
| 58 | 58 | DISMENTLING 5 TO 15A SWITCHES/MCBS/PLUGS | BI01010001010000000000000515BI0100001170 | 50 | EA |
| 59 | 59 | DISM.32/63/100A DP/TPN SWITCH/MCCBS/MCBS | BI01010001010000000000000515BI0100001171 | 40 | EA |
| 60 | 60 | DISMENTLING TUBE LIGHT FITTING ALL SIZE | BI01010001010000000000000515BI0100001172 | 80 | EA |
| 61 | 61 | SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge. | BI01010001010000000000000515BI0100001173 | ||
| 62 | 62 | 6 module frame | BI01010001010000000000000515BI0100001174 | 6 | EA |
| 63 | 63 | 8 module frame | BI01010001010000000000000515BI0100001175 | 8 | EA |
| 64 | 64 | 12 module frame | BI01010001010000000000000515BI0100001176 | 6 | EA |
| 65 | 65 | Supplying & fixing braided rubber hose of approved make suitable for oil installation. The pipe should have continuity for earthing etc. as per the specification. | BI01010001010000000000000515BI0100001177 | ||
| 66 | 66 | S/F braided rubber hose of 50 mm dia without end flanges | BI01010001010000000000000515BI0100001178 | 16 | M |
| 67 | 67 | Supply and installation of plate earthing satation using 600x600x6mm cast iron plate eath electrodeas per BIS specifications for UPS.\niii) 50 x 6 mm G.I. Strip | BI01010001010000000000000515BI0100001179 | 4.8 | M |
| 68 | 68 | i) Providing earthing with 100 mm dia, 3.0M long C.I pipe as per IS:3043 (with latest ammendment) including providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard Drawing all complete as per specification & direction of Engineer In-charge | BI01010001010000000000000515BI0100001180 | 2 | EA |
| 69 | 69 | Supply & fixing of ceiling fan with standard down rod for inside of the sales building of following type: 1200 mm sweep. | BI01010001010000000000000515BI0100001181 | 2 | No |
| 70 | 70 | Supply, fixing, testing and commissioning of 400mm sweep single phase wall mounted fan with all necessary accessories. | BI01010001010000000000000515BI0100001182 | 11 | No |
| 71 | 71 | 240V , 3Pin metal clad, 20A socket fitted with 20A SP MCB brand type 18119 of “Roma” make or equivalent make, sw. socket brand type 36165 and 20A metal clad plug top with chain cover “ Roma “ brand having code no. 5820 or equivalent make of white colour.for window /split AC-3module-90x120 (S8). | BI01010001010000000000000515BI0100001183 | 6 | No |
| 72 | 72 | Supplying and fixing 32 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 32 amps “C” curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. | BI01010001010000000000000515BI0100001184 | 3 | No |
| 73 | 73 | Supply, fixing, testing and commissioning of 1No. 6/16A, 240V modular type socket controlled by 16A switch with suitable size front plate and metal box in recessed system. The job include terminations through proper jointing materials all complete civil works like Chipping Chasing & rough plastering and all other necessary Accessories for the following Make of Insulated wires shall be as per approved make | BI01010001010000000000000515BI0100001185 | 20 | No |
| 74 | 74 | PROVIDING INTERNAL WIRING: Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. with modular switch, modular plate, suitable GI box | BI01010001010000000000000515BI0100001186 | 80 | No |
| 75 | 75 | PLUMBING | BI01010001010000000000000515BI0100001187 | ||
| 76 | 76 | Sink with drain board 510x1040mm bowl depth 250mm | BI01010001010000000000000515BI0100001188 | 1 | EA |
| 77 | 77 | Providing and fixing toilet paper holder : C.P. brass | BI01010001010000000000000515BI0100001189 | 6 | EA |
| 78 | 78 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore | BI01010001010000000000000515BI0100001190 | 17 | EA |
| 79 | 79 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore | BI01010001010000000000000515BI0100001191 | 7 | EA |
| 80 | 80 | Supply, fixing, testing and commissioning of vitreous china wall mounted type European water closet (Hindware - Mario - Cat.no.20084 (P-10.5) ; Cist.21052 or approved equivalent) with Anti-bacterial, germ-free ceramic surface, Water saving dual flush (3/6 ltrs) Ceramic Cistern. Item includes Quiet close seat & cover, SS hinges & rubber buffers for the covers, rag bolts for mounting the unit, concealed P trap, etc as per standards; All accessories forming part of the unit shall be consideredincluding connection from the Stop cock to the EWC by means of SS flexible pipe of required diameter. | BI01010001010000000000000515BI0100001192 | 4 | NO |
| 81 | 81 | Supply & fixing,testing and commissioning of vitreous chinaware flush back urinal of Size 710 X 450 X 330mm (M/s Hindware, OLYMPUS IVORY COLOUR) with overhead spray hole, built in water seal, mounted on Z brackets as per manufacturer's recommendations, M/s Jal make or equivalent pressmatic wall mounted flush (Cat no: 311 or equivalent) with SS flexible hose cpnnected to the urinal , required size of CPVC piping for the inlet & outlet including cutting and making good the walls and floors where required.; Unit shall also include Supplying & fixing concealed type fast flush valve of ( M/s. JAL - concealed flush valve, Cat No: J 287) with control cock of 32 mm with operation plate . All accessories forming part of the unit shall be considered. | BI01010001010000000000000515BI0100001193 | 3 | NO |
| 82 | 82 | Supply fixing,testing and commissioning of vitreous china/stone under counter round wash basin (M/s. Hindware - round under counter, Cat No: 10065, IVORY COLOUR) with Chrome-plated cap for overflow hole CP brass waste assembly (M/s. JAL Make Cat No: 1052), CP brass bottle trap with extension piece (M/s. JAL Make Elegant model 32 mm Cat No: 1861), wall flanges and rubber adapters for waste connection, fixing in granite platform.; Supply & fixing of pressmatic taps (pillar cock auto shut pillar tap) [Ms. JAL Make Cat No: 76210] and making good the walls floors wherever required complete.\n | BI01010001010000000000000515BI0100001194 | 3 | NO |
| 83 | 83 | Supply & fixing,testing and commissioning of Handshower (Health Faucet) [M/s JAL - Duke model Cat No: 9215 or approved equivalent] including necessary flexible SS tube & wall bracket (M/s. JAL Duke model Cat no: 481) etc complete in all respects. | BI01010001010000000000000515BI0100001195 | 4 | NO |
| 84 | 84 | Providing & fixing CP Brass towel rack 600 mm long (M/s. Jaquar Make Cat No: 35781 without lower hangers) including making good the walls etc complete. | BI01010001010000000000000515BI0100001196 | 3 | NO |
| 85 | 85 | Supply,fixing,testing and commissioning of fully hygienic liquid soap dispenser with metallic bottle (M/s. Jaquar Make Cat No: 1137 N) including providing necessary bracket for fixing as required including cutting & making good the wall etc complete. | BI01010001010000000000000515BI0100001197 | 7 | NO |
| 86 | 86 | Supplying and fixing Robe Hooks (M/s. Jaquar, Cat no: 1191N) for the WC areas. | BI01010001010000000000000515BI0100001198 | 6 | NO |
| 87 | 87 | 100X100MM SCI S&S TRAPS IS 3989 | BI01010001010000000000000515BI0100001199 | 3 | EA |
| 88 | 88 | Providing & fixing mirror of superior glass with Rectangular shape 1500x450 mm (of approved quality) & of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. | BI01010001010000000000000515BI0100001200 | 3 | NO |
| 89 | 89 | Providing and fixing on wall face unplasticised Rigid PVC soil/ waste water pipes conforming to IS:13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes inlcuding all bends & specials.\n110 mm dia | BI01010001010000000000000515BI0100001201 | 25 | M |
| 90 | 90 | 40 mm diameter pipes from over head tank to closet\nSupply,installation,testing and commissioning of 10Kg/Sq.cm rating UPVC pipe with necessary supports with 9 mm thick Nitrile rubber insulation. The cost to consider necessary bends, elbow etc., \nPipe Size : 40 mm | BI01010001010000000000000515BI0100001202 | 25 | M |
| 91 | 91 | CONSTRUCTION WORKS- stairs | BI01010001010000000000000515BI0100001203 | ||
| 92 | 92 | Providing and fixing buffed/ polished and lacquered stainless steel (SS) railing as per drawing made of vertical balusters of 37.5mm dia. heavy gauge pipe with 37.5mmx 37.5 mmx 6 mm \"U\" shaped lacquered stainless steel section/brackets to hold the railing including providing three strands of SS rods of 12 mm bar equally spaced including lacquered stainless steel bolts etc fitted to bellustrude along with suitable toe guard. Hand rail to be 50mm medium gauge lacquered stainless steel pipe balustrude fitted with 6 mm thick stainless steel flats and stainless steel shoes as approved by engineer and securely fixed to RCC work. The work also includes providing 12mm thick Toughned Glass In the Hand Rail of minimum 12mm thickness with brackets & support to be fixed in floor & hand railling on outer side of stircase hand railling complete as directed by EIC. | BI01010001010000000000000515BI0100001204 | 13 | M2 |
| 93 | 93 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | BI01010001010000000000000515BI0100001205 | 40 | KG |
| 94 | 94 | Supply & installationof SPLIT AC MODEL 5CNHW18PAFU 1.5 TON COPPER BLUE STAR OR EQUIVALENT MAKE INVERTER model AC as approved by Engineer in charge | BI01010001010000000000000515BI0100001206 | 6 | EA |
| 95 | 95 | Supply & installation of SPLIT AC MODEL 5CNHW24PAFU 2.0 TON COPPER BLUE STAR OR EQUIVALENT MAKE INVERTER model AC as approved by Engineer in charge | BI01010001010000000000000515BI0100001207 | 3 | EA |
| 96 | 96 | INTERIOR - FURNITURE | BI01010001010000000000000515BI0100001208 | ||
| 97 | 97 | Supplying and fixing of main desk of 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading.\nSupplying and fixing of Side Unit of 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.\nMake : (GODREJ: FINESSE EXECUTIVE DESK 5630 (1650X900X740) WITH FINESSE SIDE UNIT-3619 (1050X450X705)) | BI01010001010000000000000515BI0100001209 | 4 | Nos. |
| 98 | 98 | Supplying and fixing of main desk of size 1800 Width mm x 900 Depth mm x 750 Height mm.The table top shall be 25 mm thick MFC (Melamine Faced Chipboard) also there should be 30 mm MDF (Medium density fiberboard) black pad.The modesty panel shall be of 18 mm thick MFC (Melamine faced chipboard).The leg of the main desk shall be of 25 mm MFC plus 30 mm MDF right and left pad.The main table should be of duck noise profile edge in order to enhance the workspace aesthetics.\nSupplying and fixing of return desk of size 1200 Width mm x 600 Depth mm x 730 Height mm.The top panel shall 25 mm thick MFC ( Melamine Faced Chipboard) .The Modesty panel shall be 18 mm thick MFC coated. The leg of the return desk shall be 25 mm thick MFC (Melamine faced chipboard) plus the right and left pad should be 30 mm thick MDF (medium density fiber ) coated.\nMake : (GODREJ: MAESTRO (PREMIUM SUITES) EXECUTIVE DESK (1800X900X750) WITH SIDE UNIT(1200X600X730)) | BI01010001010000000000000515BI0100001210 | 3 | Nos. |
| 99 | 99 | Supply & installation of LATERAL FILING CABINET (LFC) (STORAGE CABINET) 4 Drawer LFC 3.0 Ft(With PF top) 1347.5Hx900Wx450D of Godrej make | BI01010001010000000000000515BI0100001211 | 10 | Nos. |
| 100 | 100 | Providing, making and installation of Bookshelf of size 400mm x 400mm x 1250mm. The unit consists of bottom Base, shelf unit and back support made of MR grade Ply (Make: Century/ Greenlam/ Archid ply). The bottom base is 38 mm thick ply with 1mm thick laminate finish, the shelves shall be made with 19 mm MR grade ply and placed in the zig-zag manner, each shelf size is 375 mm in length, 250 mm width and 19 mm thick with 1 mm laminate finish, and the back support is 50 mm thick made with two layer of 25 mm thick ply complete all as shown in the design drawing (Make: Green Lam. Laminate code: STN 5616 urban concrete or one grade higher equivalent of approved make) with necessary hinges, fixtures(Make. Assa abloy and Dorma )as per the design drawing and specification etc. complete as instructed by the PMC/ Engineer-in-Charge. The cost is inclusive of all materials, labour for making, hardwares, etc, complete. | BI01010001010000000000000515BI0100001212 | 5 | Nos. |
| 101 | 101 | Supplying and providing of 3 Seater sofa of 2020(mm) x total width - 1650 , seating width - 525 mm , Height - 780 mm\nIt has a muted color palette and deeply lined seats .More strikingly, its signature “V” shaped ,stainless steel legs adds up to its style quotient immensely. The seat , armrest & backrest assembly shall consists of a Pine understructure with plywood frame consisting layers of foam with wadding. The complete assembly shall be covered with Leatherette upholstery . Seat Cushion - top layer - PVC leatherite , 2nd layer - 200 gsm wadding , 3rd layer - Foam 35HR-100mm thickness , Bottom Layer - Foam 32GL-50mm thickness. Back cushion - - top layer - PVC leatherite , 2nd layer - 200 gsm wadding , 3rd layer - Foam 35HR-75mm thickness , 3rd Layer - Foam 32GL-75mm thickness. Armrest - top layer - PVC leatherite , 2nd layer - 200 gsm wadding , 3rd layer - Foam 32GL -25mm thickness .Elastic Webbing is used to give a soft contour to the seat .Leg material - SS 202(Steel).\nMake : (FEATHERLITE: PEARL LEATHERETTE/ WIPRO: VOGUE) | BI01010001010000000000000515BI0100001213 | 2 | Nos. |
| 102 | 102 | Supplying and providing of sofa of leather Tan Brown Width : 92cm, Depth : 92cm Height : 89cm Seating Height : 47.5cm OR FULL LEATHER (2S+3S) Colour BISCUIT BROWN\nMake : (GODREJ: ORLANDO/ FEATHERLITE: BARISTER-933 FULL LEATHER). | BI01010001010000000000000515BI0100001214 | 2 | Nos. |
| 103 | 103 | Providing, making and installation of executive dining table (10 seater) of size 3900mm x 1200mm x 750mm in plywood (Make: Century/ Green Ply/ Archid Ply). The table top is 50 mm thick made of two layer of 25 mm thick MR grade ply with 1 mm laminate finish and support stand is of 75 mm thick made of three layer of 25 mm thick MR grade ply with 1 mm laminate finish having edge lipping with necessary fixtures, adhesive etc. as per the design drawing and specification etc. complete as instructed by the PMC/ Engineer-in-Charge. (Laminate Make: Green Lam code: STN 5616 urban concrete or one grade higher equivalent of approved make). The cost is inclusive of all materials, labour for making, hardwares, etc, complete.\n | BI01010001010000000000000515BI0100001215 | 1 | Nos. |
| 104 | 104 | (Location In Charge Chair)\nSupplying and providing of seat made up of thick liot - prejsedOyvira(Sel, moulded polyurethane foam and upholstered with fabric. The two part assembly upholstered with Mesh fabric should be made up of back outer injection moulded in glass filled Polyamide and back inner injection moulded in glass filled Polypropylene. The back consist of adjustable Lumbar support made of injection moulded Polyoxymethylene (POM) which should be upholstered with foam and fabric.The armtop has swivel,side-to-side and to-fro movements.The chair should be designed with the following features: \n•Head rest.\n•Multilock mechanism.\n•360 degree revolving and seat slide mechanism.\n•Adjustable arms.\n•Aluminium Base / Nylon base.\nPNEUMATIC HEIGHT ADJUSTMENT: The chair to be equipped with adjustment stroke for height adjustment.\nPEDESTAL ASSY: The pedestal should be made of aluminium / nylon with buffing finish. \nMake: GODREJ: AVID HIGH BACK, FEATHERLITE: OPTIMA HB (OC-1) WITH HEADREST) | BI01010001010000000000000515BI0100001216 | 1 | Nos. |
| 105 | 105 | CHAIR GRADE - E/F/G:\nSupplying and providing of seat having cushioned seat assembly of seat outer (material-Glass Fiber Nylon)& upholstered Seat inner (material- Poly Propylene) with moulded Polyurethane foam & polyster fabric. \nBACK SPINE: The support spine should be made up of High Pressure Die cast polished hed Aluminum.\nARMRESTS : The armrest should be having two adjustment heights. Height adjustment should be provided in Aluminum structure of armrest which should be connected to Aluminum Back spine and should be operated by button. The depth adjustment should be provided in pad which should be fixed to armrest structure. Armrest Top should be made up of PU molded over plastic inner.\nThe chair to be designed with the following features:\n• Head rest.\n• 360° revolving type\n•Multilock mechanism.\n•Adjustable arms.\n•Aluminium Base / Nylon base.\n\nMake: GODREJ: ACE HIGH BACK WITH HEADREST, FEATHERLITE: LIBERATE (MESH) HB ML ADJ ARMS) | BI01010001010000000000000515BI0100001217 | 1 | Nos. |
| 106 | 106 | CHAIR GRADE - C/D:\nSupplying and providing of seat made up of hot - press 4 plywood upholstered with fabric and moulded polyurethane foam. The Back is injection moulded in Glass filled Polyamide which is upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment.The height adjustment armrest is made of Polyamide struture and polypropylene Housing with moulded PU armtop.\nThe chair to be designed with the following features:\n• 360° revolving type.\n• Tilt tension adjustment.\n• Position locking with anti-shock feature.\n• Seat/back tilting ratio of 1:2.\n• Pneumatic height adjustment.\n• Pedestal to be made in Aluminium / Nylon.\nMake: GODREJ: THRIVE MID BACK, FEATHERLITE: AMAZE PROJECT MB ML ADJ ARMS | BI01010001010000000000000515BI0100001218 | 8 | Nos. |
| 107 | 107 | CHAIR GRADE – A/B & PA: \nSupplying and providing of seat made up of hot pressed plywood.The Back should be made up of injection moulded glass filled nylon & upholstered using Net fabric with high tenacity yarn.\nARMRESTS : The armrests have an Up-Down adjustment which should be provided in armrest structure. Armrest Top has an integrated layer of Thermoplastic Elastomer (TPE). \nThe chair to be designed with the following features:\n• 360° revolving type.\n• Single point control.\n• Tilt tension adjustment.\n• Position locking with anti-shock feature.\n• Seat/back tilting ratio of 1:2.\n• Pneumatic height adjustment.\n• Pedestal to be made in Aluminium / Nylon.\nMake: GODREJ: PULSE MID BACK, FEATHERLITE: VERSA MBGS ADJ ARMS | BI01010001010000000000000515BI0100001219 | 9 | Nos. |
| 108 | 108 | CHAIR STAFF:\nSupplying and providing of seat made up of hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam.\nBACK ASSEMBLY: The back asembly should be made of powder coated (OFT 40-60 microns) tubular frame. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn.\nARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. \nThe chair to be designed with the following features:\n• 360° revolving type.\n• Single point control.\n• Tilt tension adjustment.\n• Position locking with anti-shock feature.\n• Seat/back tilting ratio of 1:2.\n• Pneumatic height adjustment.\n• Pedestal to be made in Aluminium / Nylon.\nMake: GODREJ: OXBO MID BACK, FEATHERLITE: ALPHA MBG FXD ARMS - PP Black | BI01010001010000000000000515BI0100001220 | 5 | Nos. |
| 109 | 109 | (CONFERENCE CHAIRS)\nSupplying and providing of seat made up of thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam The back is made up of thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam.\nARMRESTS (ADJUSTABLE):The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support.\nThe chair to be designed with the following features:\n•Multilock mechanism.\n•High back.\n•360 degree revolving and seat slide mechanism.\n•Adjustable arms.\n•Aluminium Base.\nPNEUMATIC HEIGHT ADJUSTMENT: The chair to be equipped with adjustment stroke for height adjustment.\nPEDESTAL ASSY: The pedestal should be made of aluminium with buffing finish. It should be fitted with 5nos. twin wheel castor. \nMake: GODREJ: KAREENA NXT HIGH BACK, FEATHERLITE: FP INVENTION HB LEATHERETTE | BI01010001010000000000000515BI0100001221 | 18 | Nos. |
| 110 | 110 | Supplying and providing of 3 Seater sofa of size 1880(mm) x total width - 1590 , seating width - 515 mm , Height - 780 mm\nThe plush styled sofa boasts a low frame for an inviting feel and the symmetric curves fits in to any room & design. A subtle charm with its wooden rounded legs and coveted rounded armrests.\nThe seat , armrest & backrest assembly shall consists of a Pine understructure with plywood frame consisting layers of foam with wadding. The complete assembly shall be covered with Leatherette upholstery . Seat Cushion - top layer - PVC leatherite , 2nd layer - 200 gsm wadding , Bottom Layer - Foam 35HR-100mm thickness. Back cushion - top layer - PVC leatherite ,2nd layer - 200 gsm wadding , 3rd layer - Foam 28GL -50mm thickness , Bottom Layer - Foam 28GL -25mm thickness. Armrest - top layer - PVC leatherite ,,2nd layer - 200 gsm wadding , 3rd layer - Foam 28GL -50mm thickness , Bottom Layer - Foam 28GL -25mm thickness. .Elastic Webbing is used to give a soft contour to the seat .Leg material - Natural , Wood.\nMake : (FEATHERLITE: INTERACT:S-902 FABRI/ WIPRO: BLISS) | BI01010001010000000000000515BI0100001222 | 7 | No |
| 111 | 111 | Providing and fixing Decorative Designer Wall Paper on to partition / ply finish / wall/ Ceiling etc with approved adhesive as approved over paneling in any shape, Size, length etc.Including preparing surface for Wall paper. (Rate to include wastage due to shape). | BI01010001010000000000000515BI0100001223 | 12 | NO |
| 112 | 112 | BRANDING | BI01010001010000000000000515BI0100001224 | ||
| 113 | 113 | Providing & fixing Branding Unit in areas mentioned by architect made out of using 8mm two Acrylic sheets and Graphic paper fixed in sandwich pattern with ss studs as specified in detail drawing of one or more clours or combination of colurs with buffing , complete as directed by EIC. | BI01010001010000000000000515BI0100001225 | 3 | Nos. |
| 114 | 114 | PAINTING | BI01010001010000000000000515BI0100001226 | ||
| 115 | 115 | Supply and application of 2 or more coats of Premium Acrylic emulsion paint of interior grade Activated Carbon Technology to purity the air having VOC (Volatile Organic Compounds) content less than 50 grams/litre of approved brand and manufacture on ceiling, walls, Partitions, Concrete surface, etc including the cost of suitable primer having VOC (Volatile Organic Compounds) content less than 50 grams/litre and two coates of putty and primer work and as per approved shade by the Architect. Cost to include preparing the surface, applying primer, necessary staging/ scaffolding, etc. complete. (Approved makes are Nerolac/ Asian/ Berger/ Duluxe). | BI01010001010000000000000515BI0100001227 | 785 | M2 |
| 116 | 116 | Applying one coat of Acrylic emulsion compatible primer of approved brand and make on wall surface & painting with silicon & acrylic emulsion based water thinnable interior paint with 2 or more coats. | BI01010001010000000000000515BI0100001228 | 750 | M2 |
| 117 | 117 | Supply and application of Decorative paint / Texture paint of make Nerolac/ Asian/ Berger/ Duluxe for Plastered walls / RC surface to be applied as directed by Architect/ Engineer-in-Charge including preparing the surface, providing and applying one coat of water base primer of approved make and two coat of water base acrylic putty approved make, sanding, light sanding, scaffolding, work platform, painting equipment / apparatus etc. required to complete Exterior grade finish with 3 coats of approved shade colour etc. complete as directed by the PMC/ EIC at all heights & levels. (Approved makes are Nerolac/ Asian/ Berger/ Duluxe) | BI01010001010000000000000515BI0100001229 | 730 | M2 |
| 118 | 118 | DEMOLITION WORKS | BI01010001010000000000000515BI0100001230 | ||
| 119 | 119 | PARTITIONS | BI01010001010000000000000515BI0100001231 | ||
| 120 | 120 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within premises lead as directed by Engineer-in-charge. | BI01010001010000000000000515BI0100001232 | 190 | M2 |
| 121 | 121 | MASONARY | BI01010001010000000000000515BI0100001233 | ||
| 122 | 122 | Demolishing brick work manually/mechanical means including stacking of serviceable material & disposal of unserviceable material outside premises at an unobjectionable place as / direction of Engg-in-charge | BI01010001010000000000000515BI0100001234 | 60 | M3 |
| 123 | 123 | DISMANTLING WORKS- DOORS WINDOWS | BI01010001010000000000000515BI0100001235 | ||
| 124 | 124 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within premisesOf area 3 sq. metres and below | BI01010001010000000000000515BI0100001236 | 22 | EA |
| 125 | 125 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within premises lead as directed by Engineer-in-charge. | BI01010001010000000000000515BI0100001237 | 190 | M2 |
| 126 | 126 | DISMANTLING WORKS- CEILING | BI01010001010000000000000515BI0100001238 | ||
| 127 | 127 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within premises lead as directed by Engineer-in-charge. | BI01010001010000000000000515BI0100001239 | 330 | M2 |
| 128 | 128 | Part-B: GULBURGA DEPOT | BI01010001010000000000000515BI0100001240 | ||
| 129 | 129 | Dismantling Works | BI01010001010000000000000515BI0100001241 | ||
| 130 | 130 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within premises | BI01010001010000000000000515BI0100001242 | 230 | M2 |
| 131 | 131 | Dismantling and disposing to safe place Vitrified/Ceramic/Mosaic/Cement Chequered or Cement Tiles/ Paver Blocks upto 100mm thickness any other tile work in floors of any size shape & material laid in cement mortar or fixed by any adhesive including removal of cement & grit or sand under layer including stacking material wihtin 500 metres lead. | BI01010001010000000000000515BI0100001243 | 100 | M2 |
| 132 | 132 | Dismantelling all sanitary fittings of any Brand Model/Color/Shape and fixtures of any make including plumbing fittings with pipe lines, Miror, Electronic Automatic Fulshing System, Conceal/External Flush Tank/Valve , W.C- Indian or European., Fixed Soap Dispensers, Hand Towel, Disposable hand Towel, S.S. Towel Rail, Automatic Hot Air Type Hand Drier & etc. This item shall also include removal of all Plumbig fittings,like Nahani Trap C.P.V.C./GI/PVC pipes & its required fittings. There would not be any restriction on the number of sanitary or plumbing fittings, including stacking of serviceable material and disposal of unserviceable material within IOCL premisis 500 metres lead or as may be directed by EIC.. The contractor is advised to strictly go through site before quoting for each toilet. No extra payments shall be entertained. :Toilets in Ground Floor of Admin Building | BI01010001010000000000000515BI0100001244 | 1 | LS |
| 133 | 133 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within premises lead as directed by Engineer-in-charge. | BI01010001010000000000000515BI0100001245 | 200 | M2 |
| 134 | 134 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within premises: Of area 3 sq. metres and below | BI01010001010000000000000515BI0100001246 | 25 | EA |
| 135 | 135 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within premises | BI01010001010000000000000515BI0100001247 | 50 | M2 |
| 136 | 136 | Demolishing C.C./R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1000 m, stacking serviceable and unserviceable material separately including cutting reinforcement bars. | BI01010001010000000000000515BI0100001248 | 1 | M3 |
| 137 | 137 | Carriage charge for disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, stacking, unloading to approved municipal dumping ground/unobjectionable place as/direction of Engg- in-Charge beyond IOCL Premises for all leads and including all lifts: Distance > 1 km< 3 km | BI01010001010000000000000515BI0100001249 | 20 | M3 |
| 138 | 138 | Demolishing brick work manually/mechanical means including stacking of serviceable material & disposal of unserviceable material outside premises at an unobjectionable place as / direction of Engg-in-charge | BI01010001010000000000000515BI0100001250 | 5 | M3 |
| 139 | 139 | Charges towards dismantling of old split air conditioners including stabilizers, compressor unit and stacking it at safer place as allocated by engg in charge etc, complete | BI01010001010000000000000515BI0100001251 | 5 | EA |
| 140 | 140 | DISMANTLING Dismantling of following electrical fittings / fixtures with all leads and lifts: Electrical cables of all sizes from under / above ground position | BI01010001010000000000000515BI0100001252 | 500 | M |
| 141 | 141 | DISMANTLING Dismantling of following electrical fittings / fixtures with all leads and lifts: DPS board all types with/ without stand | BI01010001010000000000000515BI0100001253 | 20 | EA |
| 142 | 142 | DISMANTLING Dismantling of following electrical fittings / fixtures with all leads and lifts: 5 to 15A switches/MCBs/plugs | BI01010001010000000000000515BI0100001254 | 20 | EA |
| 143 | 143 | Civil Works | BI01010001010000000000000515BI0100001255 | ||
| 144 | 144 | Brick work with class designation 5.0 bricks in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure ABOVE PLINTH AND UP TO FLOOR V LEVEL | BI01010001010000000000000515BI0100001256 | 5 | M3 |
| 145 | 145 | Half brick masonry with Class designation 5.0 bricks in Cement mortar 1:4 ( 1 cement : 4 coarse sand) IN superstructure ABOVE PLINTH & UP TO FLOOR V LEVEL | BI01010001010000000000000515BI0100001257 | 10 | M2 |
| 146 | 146 | Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry | BI01010001010000000000000515BI0100001258 | 60 | M2 |
| 147 | 147 | Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sand jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete for flooring/skirting as specified: Flooring with size of Tiles 60x60Cm in cement mortar 1:4 | BI01010001010000000000000515BI0100001259 | 185 | M2 |
| 148 | 148 | Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sand jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete for flooring/skirting as specified: Skirting with size of Tiles 60x60Cm in Cement mortar 1:3 | BI01010001010000000000000515BI0100001260 | 15 | M2 |
| 149 | 149 | Deduct for not using 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.30kg/sqm | BI01010001010000000000000515BI0100001261 | 15 | M2 |
| 150 | 150 | Fixing glazed/ Ceramic/Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using quick set tile adhesive(water based) in average 3mm thickness. | BI01010001010000000000000515BI0100001262 | 15 | M2 |
| 151 | 151 | Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade. | BI01010001010000000000000515BI0100001263 | 15 | M2 |
| 152 | 152 | Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete. | BI01010001010000000000000515BI0100001264 | 95 | M2 |
| 153 | 153 | Providing & laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc. UP TO FLOOR V LEVEL excluding the cost of centering, shuttering and finishing : PCC 1 Cement:2 Coarse Sand:4 Graded Stone Aggregate 20mm | BI01010001010000000000000515BI0100001265 | 2 | M3 |
| 154 | 154 | Providing & laying water proofing treatment in sunken portion of WCs, bathroom etc. by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment & sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | BI01010001010000000000000515BI0100001266 | 15 | M2 |
| 155 | 155 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels:Granite of any colour and shade having Area of slab upto 0.50 sqm | BI01010001010000000000000515BI0100001267 | 2 | M2 |
| 156 | 156 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels: Granite of any colour and shade having Area of slab over 0.50 sqm | BI01010001010000000000000515BI0100001268 | 2 | M2 |
| 157 | 157 | Extra for providing edge moulding to 18mm Granite/ marble stone counters,Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in- Charge: Granite work | BI01010001010000000000000515BI0100001269 | 10 | M |
| 158 | 158 | Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters & similar location in marble/Granite/stone work including necessary holes for pillar taps etc.including rubbing and polishing of cut edges etc.complete | BI01010001010000000000000515BI0100001270 | 3 | EA |
| 159 | 159 | Partitions, Doors, Windows Work | BI01010001010000000000000515BI0100001271 | ||
| 160 | 160 | i) 75 mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3:1996 (Board With BIS Certification Marks). | BI01010001010000000000000515BI0100001272 | 10 | M2 |
| 161 | 161 | FIXED PLY WOOD PARTATION Supply & fixing fixed ply partations, ply 12 mm thick both side on inside 25 x 25 mm GI square pipe all side and center support and laminates on ply both side. Item includes all fittings and accessories complete complete as per specification, drawings and direction of Engineer-in-charge | BI01010001010000000000000515BI0100001273 | 10 | M2 |
| 162 | 162 | GLAZED PLY WOOD PARTATION Supply & fixing fixed ply partations, ply 12 mm thick both side on inside 25 x 25 mm GI square pipe all side and center support and laminates on ply both side. Item includes all fittings and accessories complete as per specification, drawings and direction of Engineer-in-charge | BI01010001010000000000000515BI0100001274 | 80 | M2 |
| 163 | 163 | DOORS - PARTLY GLAZED & PARTLY PLY WOOD Supply & fixing DOOR partly glazed of 6mm toughed glass and partly ply with with gi section 25 mm x 25 mm square pipe,12 mm ply & laminates both sides , as per drg. Item includes all fittings( hinge, door lock,door closer ) and accessories complete as per specification, drawings and direction of Engineer-in-charge | BI01010001010000000000000515BI0100001275 | 10 | M2 |
| 164 | 164 | Providing & Fixing 15mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone/cosmos / Hexa or equivalent) of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minimum) sheet, spaced 1200mm centre to centre, and cross \"T\" of size 24x28mm made out of 0.33mm (Minimum) sheet, 1200mm long spaced between main'T' at 600mm centre to centre to form a grid of 1200x600mm and secondary cross 'T' of length 600mm and size 24 x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600mm panel to from grid of size 600x600mm resting on periphery walls / partitions on Perimeter wall angle pre- coated steel of size(24x24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture (Spintone/Cosmos/hexa) in the grid including,cutting/ making opening for services like diffusers, grills,light fittings, fixtures, smoke detectors etc., wherever required, Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm ceiling with 12.5 mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanised steel level clips of size 85x30x0.8 mm spaced at 1200mm centre to centre along main'T', bottom exposed with 24mm of all T-sections shall be pre-painted with polyester baked paint for all heights,as per specifications,drawings & as directed by engineer-in- charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames /opening (cut outs) having area less than 0.30 sqm.The calcium silicate tile shall have NRC value of 0.50(Minimum), light reflection > 85%, non - combustible as per B.S. 476 part IV, 100% humidity resistance & also having thermal conductivity<0.043 w/mK | BI01010001010000000000000515BI0100001276 | 90 | M2 |
| 165 | 165 | Providing & fixing at all height FALSE CEILING including providing & fixing of frame work made of special sections power pressed from M.S. sheets and galvanised with zinc coating 120gsm/sqm as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts ,other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length, and with nut and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x 0.9mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the perimeter channels 0.5mm thick 27mm high having flanges of 20mm & 30mm long, the perimeter of ceiling fixed to wall partition with the help of rawl plugs at 450mm centre to centre with 25 mm long drive-all screws @ 230mm interval including jointing & fixing of gypsum board of ceiling section & perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm centre to centre including jointing and finishing to a flush finish of tapered & square edges of the board with recommended jointing compoud. Jointing tapes, finishing with jointing compoud in 3 layers covering upto 150 mm on both sides of joint & 2 coats of primer suitable for board, all as per manufacturer specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, complete as per drawing & specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5mm thick tapered edge fire resistant GYPSUM BOARD conforming to IS:2095- PART-I:2011 (board with BIS Certification marks) | BI01010001010000000000000515BI0100001277 | 95 | M2 |
| 166 | 166 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately): Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections | BI01010001010000000000000515BI0100001278 | 15 | KG |
| 167 | 167 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately): For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) | BI01010001010000000000000515BI0100001279 | 15 | KG |
| 168 | 168 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/stainless steel screws etc. complete as per directions of Engineer in charge: Pre-laminated particle board with decorative lamination on both sides | BI01010001010000000000000515BI0100001280 | 5 | M2 |
| 169 | 169 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.0 mm thickness (weight not less than 12.5kg/sqm) | BI01010001010000000000000515BI0100001281 | 20 | M2 |
| 170 | 170 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge: With stainless steel cover plate | BI01010001010000000000000515BI0100001282 | 10 | EA |
| 171 | 171 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per direction of Engineer in Charge complete Upto 5mm depth and 5mm width | BI01010001010000000000000515BI0100001283 | 50 | M |
| 172 | 172 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. complete as per direction of Engineer-in-Charge: Powder coated minimum thickness 50 micron aluminium tubular handle bar | BI01010001010000000000000515BI0100001284 | 5 | EA |
| 173 | 173 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | BI01010001010000000000000515BI0100001285 | 5 | EA |
| 174 | 174 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. Complete: Powder coated minimum thickness 50micron aluminium | BI01010001010000000000000515BI0100001286 | 15 | EA |
| 175 | 175 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). | BI01010001010000000000000515BI0100001287 | 10 | M2 |
| 176 | 176 | Providing & fixing MS grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.including priming coat with approved steel primer (fixed to steel windows by welding) all complete. | BI01010001010000000000000515BI0100001288 | 70 | KG |
| 177 | 177 | Providing and fixing factory made 30mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75mm x 30mm having wall thickness 5mm. The styles, top & bottom rails shall have one side wall thickness of 15mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with MS tubes of size 33mm x 17mm x 1mm painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5mm PVC sheet as panel. The styles and rails shall be mitred cut and joint with help of PVC solvent cement and self tapping screws. Single piece extruded solid PVC lock rail of size 100mm x 30mm with wall thickness 5mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturer's specifications and direction of Engineer-in-charge: Decorative finish (both side wood grained finish) | BI01010001010000000000000515BI0100001289 | 10 | M2 |
| 178 | 178 | Providing and fixing Hardwin make toughened glass chrome finished door lock including cutting, making good etc.cpmplete | BI01010001010000000000000515BI0100001290 | 2 | EA |
| 179 | 179 | Providing and fixing Hardwin make toughened glass chrome finished door Handle of 300mm long including cutting, making good etc.cpmplete | BI01010001010000000000000515BI0100001291 | 4 | EA |
| 180 | 180 | Finishing Works-Plastering, Painting, Workstation etc. | BI01010001010000000000000515BI0100001292 | ||
| 181 | 181 | Providing and laying cement plaster on surfaces with fine sand including curing etc.: 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) | BI01010001010000000000000515BI0100001293 | 105 | M2 |
| 182 | 182 | Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete | BI01010001010000000000000515BI0100001294 | 105 | M2 |
| 183 | 183 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade with 2 or more coats | BI01010001010000000000000515BI0100001295 | 250 | M2 |
| 184 | 184 | Providing and Fixing in position approved equivalent make Frosted film on glass patition/glass on doors etc . The item to be completed as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge. (make 3M or approved equivalent) (Basic Cost Rs 1398/- Per Sqm) | BI01010001010000000000000515BI0100001296 | 5 | M2 |
| 185 | 185 | Godrej Xpress Office Penta ( Work Station)\n Supply of installtion of Work Station Godrej Xpress Office Penta Size 5'*5'\nXpress Office consist of Keyboard tray , CPU trolley, & Pedestal | BI01010001010000000000000515BI0100001297 | 4 | EA |
| 186 | 186 | Supply & Installation of Vertical blinds 100% polyster with acrylic acid coating with 4\" standard quality alluminum channel with power coating & accerories | BI01010001010000000000000515BI0100001298 | 15 | M2 |
| 187 | 187 | Supply, fixing d line/approved equivalent make stainless steel AISI 316 grade satin finish signanage of multi coloured Embossing of appropriate depth of size 58 x 298x 2 mm and having text / signage with 3 M double side tape for fixing complete. | BI01010001010000000000000515BI0100001299 | 2 | EA |
| 188 | 188 | Supply, fixing d line/approved equivalent make stainless steel AISI 316 grade satin finish signanage of multi coloured Embossing of appropriate depth of size Size 147 mm x 147 mm x 2mm and having text & or signage with 3 M double side tape for fixing complete. | BI01010001010000000000000515BI0100001300 | 1 | EA |
| 189 | 189 | Sanitary & Plumbing Works | BI01010001010000000000000515BI0100001301 | ||
| 190 | 190 | Supply, fixing, testing and commissioning of vitreous china wall mounted type European water closet (Hindware - Mario - Cat.no.20084 (P-10.5) ; Cist.21052 or approved equivalent) with Anti-bacterial, germ-free ceramic surface, Water saving dual flush (3/6 ltrs) Ceramic Cistern. Item includes Quiet close seat & cover, SS hinges & rubber buffers for the covers, rag bolts for mounting the unit, concealed P trap, etc as per standards; All accessories forming part of the unit shall be consideredincluding connection from the Stop cock to the EWC by means of SS flexible pipe of required diameter. | BI01010001010000000000000515BI0100001302 | 3 | EA |
| 191 | 191 | Supply fixing,testing and commissioning of vitreous china/stone under counter round wash basin (M/s. Hindware - round under counter, Cat No: 10065, IVORY COLOUR) with Chrome-plated cap for overflow hole CP brass waste assembly (M/s. JAL Make Cat No: 1052), CP brass bottle trap with extension piece (M/s. JAL Make Elegant model 32 mm Cat No: 1861), wall flanges and rubber adapters for waste connection, fixing in granite platform.; Supply & fixing of pressmatic taps (pillar cock auto shut pillar tap) [Ms. JAL Make Cat No: 76210] and making good the walls floors wherever required complete.\n | BI01010001010000000000000515BI0100001303 | 2 | EA |
| 192 | 192 | Supply & fixing,testing and commissioning of vitreous chinaware flush back urinal of Size 710 X 450 X 330mm (M/s Hindware, OLYMPUS IVORY COLOUR) with overhead spray hole, built in water seal, mounted on Z brackets as per manufacturer's recommendations, M/s Jal make or equivalent pressmatic wall mounted flush (Cat no: 311 or equivalent) with SS flexible hose cpnnected to the urinal , required size of CPVC piping for the inlet & outlet including cutting and making good the walls and floors where required.; Unit shall also include Supplying & fixing concealed type fast flush valve of ( M/s. JAL - concealed flush valve, Cat No: J 287) with control cock of 32 mm with operation plate . All accessories forming part of the unit shall be considered. | BI01010001010000000000000515BI0100001304 | 3 | EA |
| 193 | 193 | Supply & fixing,testing and commissioning of Handshower (Health Faucet) [M/s JAL - Duke model Cat No: 9215 or approved equivalent] including necessary flexible SS tube & wall bracket (M/s. JAL Duke model Cat no: 481) etc complete in all respects. | BI01010001010000000000000515BI0100001305 | 3 | EA |
| 194 | 194 | Supply,fixing,testing and commissioning of fully hygienic liquid soap dispenser with metallic bottle (M/s. Jaquar Make Cat No: 1137 N) including providing necessary bracket for fixing as required including cutting & making good the wall etc complete. | BI01010001010000000000000515BI0100001306 | 2 | EA |
| 195 | 195 | Providing & fixing CP Brass towel rack 600 mm long (M/s. Jaquar Make Cat No: 35781 without lower hangers) including making good the walls etc complete. | BI01010001010000000000000515BI0100001307 | 2 | EA |
| 196 | 196 | Supplying and fixing Robe Hooks (M/s. Jaquar, Cat no: 1191N) for the WC areas. | BI01010001010000000000000515BI0100001308 | 6 | EA |
| 197 | 197 | Supply & installaton of 2 way Bib Tap 2 Way Bib Cock\n2 Way Bib Cock\nSKU: CON-CHR-041KN JAGUAR or equivalent make approved by Engineer In Charge | BI01010001010000000000000515BI0100001309 | 2 | EA |
| 198 | 198 | Supply & installaton of Angular Stop Cock \nAlso available \nCode: CON-059KN Angular Stop Cock\nSKU: CON-CHR-053KN JAGUAR or equivalent make approved by Engineer In Charge | BI01010001010000000000000515BI0100001310 | 2 | EA |
| 199 | 199 | Supply & installaton of Bib Cock Bib Cock\nBib Cock with Nozzle\nSKU: CON-CHR-049KN JAGUAR or equivalent make approved by Engineer In Charge | BI01010001010000000000000515BI0100001311 | 5 | EA |
| 200 | 200 | Supply & installaton of Towel Rod MODEL NO- AEC-1111B JAGUAR GROUP- ESSCO | BI01010001010000000000000515BI0100001312 | 2 | EA |
| 201 | 201 | Supply & installaton of Toilet Paper Holder AEC-1151 : Toilet Paper Holder JAGUAR GROUP- ESSCO\nCode:AEC-1151 Toilet Paper Holder\nSKU: AEC-CHR-1151 JAGUAR or equivalent make approved by Engineer In Charge | BI01010001010000000000000515BI0100001313 | 2 | EA |
| 202 | 202 | Providing and fixing Jaguar make Urinal Partition of 8mm thick glass clamped and fitted to wall with all acessories and labour etc, complete | BI01010001010000000000000515BI0100001314 | 2 | EA |
| 203 | 203 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | BI01010001010000000000000515BI0100001315 | 10 | EA |
| 204 | 204 | Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. | BI01010001010000000000000515BI0100001316 | 10 | EA |
| 205 | 205 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001317 | 1 | EA |
| 206 | 206 | Providing & fixing mirror of superior glass (of approved quality) & of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm | BI01010001010000000000000515BI0100001318 | 1 | EA |
| 207 | 207 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall: 40 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001319 | 100 | M |
| 208 | 208 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.: 25 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001320 | 50 | M |
| 209 | 209 | Electrical Works | BI01010001010000000000000515BI0100001321 | ||
| 210 | 210 | Supply & installaton of 8W, LED tube slim 600 mm long, with batten comprising of thermally conductive material. Pre-wired with high efficiency electronic driver and having high translucent frosted diffuser. Crompton LCCLB08-CDL/Equivalent make, as approved by EIC in line with enclosed technical specifications | BI01010001010000000000000515BI0100001322 | 4 | EA |
| 211 | 211 | Supply & installaton of 40W, highly efficient recessed LED ceiling tile with high transmittance, micro linear frosted(MLF) PMMA curved diffuser providing glare free light, suitable for 600mmX600mm modular ceiling as per technical specification. Crompton LCTAR1-40-CDL/Equivalent make, as approved by EIC in line with enclosed technical specifications | BI01010001010000000000000515BI0100001323 | 4 | EA |
| 212 | 212 | Supply, Installation, Testing & Commissiong of 38W, 3200 Lumens LED 1200X 300 mm Recess mounted light fittings with integral driver of same make and mimuim IP20 Rated with inbuilt Polycarbonate diffuser complete with all its accessories Philips Model RC380B LED32S-6500 L120W30 PSU OD or equivalent make. | BI01010001010000000000000515BI0100001324 | 10 | EA |
| 213 | 213 | Supply, fixing, testing and commissioning of 18W LED SURFACE/RECESS MOUNTED DOWNLIGHTER WITH 1200LM, 6500K, SIMILAR TO PHILIPS CAT. No. SM250 LED12S 6500 PSU lighting luminaries with all other necessary accessories Complete.\n\nSamples to be submitted and get approval fom IOCL/ Consultant before procurement\nFor LED light fittings, the complete luminaries should have a warranty for 5 years which includes the housing + LED + Driver . \nThe optic shall be diffuser. The system efficacy shall not be less than 100lm/W. Luminaries thickness shall not be greater than 35mm, surge protection of 2.5kV and operating voltage of 140 - 270V. SDCM<5. The burning hours of the LED luminaries shall be 30,000 hours @L70. The CRI of the luminaries shall be >80. \n | BI01010001010000000000000515BI0100001325 | 10 | EA |
| 214 | 214 | Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with 4mm thick toughened glass of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. | BI01010001010000000000000515BI0100001326 | 10 | EA |
| 215 | 215 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. | BI01010001010000000000000515BI0100001327 | 25 | EA |
| 216 | 216 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. with modular switch, modular plate, suitable GI box | BI01010001010000000000000515BI0100001328 | 10 | EA |
| 217 | 217 | Providing following point wiring with standard wire/ cable, plug, fittings, with suitable sockets, suitable GI box with front plate etc. complete, to include circuits from distribution boards to individual point boards, suitable PVC casing capping and required accessories pulling of wires, etc. complete: Supplying and drawing following 2 pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. | BI01010001010000000000000515BI0100001329 | 300 | M |
| 218 | 218 | Providing following point wiring with standard wire/ cable, plug, fittings, with suitable sockets, suitable GI box with front plate etc. complete, to include circuits from distribution boards to individual point boards, suitable PVC casing capping and required accessories pulling of wires, etc. complete: Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. | BI01010001010000000000000515BI0100001330 | 100 | M |
| 219 | 219 | Supply and fixing of following Electrical fittings /fixtures: 5 Amp modular type switch | BI01010001010000000000000515BI0100001331 | 20 | EA |
| 220 | 220 | Supply and fixing of following Electrical fittings /fixtures: 15Amp modular type switch | BI01010001010000000000000515BI0100001332 | 20 | EA |
| 221 | 221 | Supply and fixing of following Electrical fittings /fixtures: 15Amp modular type 6 pin socket | BI01010001010000000000000515BI0100001333 | 10 | EA |
| 222 | 222 | SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge: 1or 2 module frame | BI01010001010000000000000515BI0100001334 | 10 | EA |
| 223 | 223 | SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge: 3 module frame | BI01010001010000000000000515BI0100001335 | 10 | EA |
| 224 | 224 | SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge: 4 module frame | BI01010001010000000000000515BI0100001336 | 10 | EA |
| 225 | 225 | SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge: 6 module frame | BI01010001010000000000000515BI0100001337 | 10 | EA |
| 226 | 226 | SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge: 6A Modular Switch | BI01010001010000000000000515BI0100001338 | 10 | EA |
| 227 | 227 | SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge: 15 A Modular switch | BI01010001010000000000000515BI0100001339 | 10 | EA |
| 228 | 228 | SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge.: 6A, 3 Pin Modular Socket | BI01010001010000000000000515BI0100001340 | 10 | EA |
| 229 | 229 | SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge: 15 A 6 Pin Modular socket | BI01010001010000000000000515BI0100001341 | 10 | EA |
| 230 | 230 | SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge: 2 Pin Telephone Modular Socket | BI01010001010000000000000515BI0100001342 | 10 | EA |
| 231 | 231 | SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge: Fan Regulator of stepped modular type | BI01010001010000000000000515BI0100001343 | 10 | EA |
| 232 | 232 | SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge: Modular type TV/cable sockets. | BI01010001010000000000000515BI0100001344 | 10 | EA |
| 233 | 233 | CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type: 1200 mm sweep | BI01010001010000000000000515BI0100001345 | 5 | EA |
| 234 | 234 | CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type: 1400 mm sweep | BI01010001010000000000000515BI0100001346 | 5 | EA |
| 235 | 235 | EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan): 9\" dia light duty, make Khaitan or equivalent | BI01010001010000000000000515BI0100001347 | 2 | EA |
| 236 | 236 | EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan): 12\" heavy duty, make GEC or equivalent | BI01010001010000000000000515BI0100001348 | 5 | EA |
| 237 | 237 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. | BI01010001010000000000000515BI0100001349 | 12 | EA |
| 238 | 238 | Charges towards installation of old split air conditioners including stabilizers, compressor unit and outer clamp etc, complete | BI01010001010000000000000515BI0100001350 | 5 | EA |
AI Tender Summary
Tender Timeline
Jun 04, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 16, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 17, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender