Providing And Installation Of Fire Fighting And Sprinkler System In New Bus Stand , Rajpura Road , Patiala, New Bus Stand, Rajpura Road, Patiala-Punjab

TDR : 28070359

Tender Notice
Corrigendum Details
BOQ

Expired

New Bus Stand, Rajpura Road, Patiala , Punjab

Tender Brief : Corrigendum : Providing And Installation Of Fire Fighting And Sprinkler System In New Bus Stand , Rajpura Road , Patiala

Document Fees
Refer document

EMD
₹ 187200.0 /-

Tender Value
Refer document

Submission Date
18-06-2021

Competition Type
Indian

Bidding Type
Rate Contract

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	18-06-2021	Date Extension Corrigendum	Date	18-06-2021
2	17-06-2021	Due Date Extended	Admin Corrigendum Date Extend	18-06-2021

Name of Work: Providing and Installation of Fire Fighting & Sprinkler System in New Bus Stand, Rajpura Road, Patiala.
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	FIRE FIGHTING AND SPRINKLER SYSTEM	1
2	2	M.S PIPE (In side Ground)	2
3	3	Providing, laying, Fixing, testing and commissioning of \"C\" Class heavy duty MS pipe Confirming to Indian standard IS. 1239/3589 including fitting like tees, bends, sockets, elbows, flanges,tapers, nuts bolts, gasket etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape)MAKE: IWL India Limited,Makpolykote as per IC:10221 including cost of primer etc excluding cost of excavation and refilling complete in all respect.	3
4	4	150mm	4	150	Mtr
5	5	M.S PIPE(On Surface)	5
6	6	Providing, laying, Fixing, testing and commissioning of \"C\" Class heavy duty MS pipe Confirming to Indian standard IS. 1239/3589 including fitting like tees, bends, sockets, elbows, flanges,tapers, nuts bolts, gasket etc. fixing the pipe on the wall/ ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects.	6
7	7	250mm	7	12	Mtr
8	8	200mm	8	20	Mtr
9	9	150mm	9	1200	Mtr
10	10	100mm	10	200	Mtr
11	11	80mm	11	200	Mtr
12	12	65mm	12	125	Mtr
13	13	50mm	13	200	Mtr
14	14	32mm	14	225	Mtr
15	15	25mm	15	600	Mtr
16	16	HYDRANT LANDING VALVE	16
17	17	Supplying,Installation, Testing & Commissiong of G.M Single headed hydrant valve with instantaneous Gun metal peet Coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5299 (typeA) with blank Gunmetal cap and chain includung orifice plate made of 6mm the stainless steel to keep the pressure not more than 3.5 per sqcm at any point complete in all respect.	17	40	Nos.
18	18	BRANCH PIPE	18
19	19	Supplying , installation, testing and commission of 63 mm gun metal Branch pipe(ISI marked) with 20mm(normal internal dia) size gunmetal nozzel confirming to IS 903, suitable for instantaneous connection to interconnection hose pipe coupling as required.	19	40	Nos.
20	20	DRAW OUT CONNECTION	20
21	21	Supplying , installation, testing and commission of single suction collecting head with iron cast body,hose coupling(DRAW OUT CONNECTION) with female outlet completewith bolts, nuts & rubber insertionsbut without 100mm dia suction pipe with pubble flanges with foot valvescomplete as required.	21	1	Nos.
22	22	FIRE BRIGADE INLET	22
23	23	Providing & fixing Fire Brigade inlet connection of cast iron body with gunmetal 63mm dia instantaneous type male couplings with built-in check valves and 150mm dia, flanged outlet complete with bolts, nuts and rubber insertions as per IS:904.	23
24	24	Four way inlet connection	24	3	Nos.
25	25	Two way inlet connection	25	5	Nos.
26	26	RRL HOSE PIPE	26
27	27	Supplying , installation, testing and commission of RRL fire hose type A, IS: 636, 63 mm dia x 15 m long with gun metal male and female coupling(ISI marked) bound & riverted to hose pipes with copper rivets and copper wire as required.	27	82	Nos.
28	28	FIRST AID HOSE REEL	28
29	29	Supplying, installation, testing and commissioning of First-Aid-fire Hose reel with MS construction spray painted in post office red, confirming to IS 884 with opto date amendmets, complete with rubber hose pipe (IS:444/1987) 20 mm dia 30 meter long type-2, hose reel drum with bracket as per Is:884, 20mm dia GM nozzle and 20mm dia GM gates valve as required with complete with G.I pipe connection with main pipecomplete in all respect.	29	20	Nos.
30	30	HYDRANT BOX	30
31	31	Supply, installation, testing & Commissioning of weather proof cabinet for hose fabricated out of 1.6mm thickness M.S sheet with the front glass door having locking arrangement, suitable to accomadate all the necessary pipes, accessories, fitting etc. including painting the metal portion with one coat of ready mixed primer paint and two enamel coats of synthetic paint of all approved quality,shade and sign writing etc.	31
32	32	600mm wide x 600mmhigh x 250mm deep (Inner)	32	20	Nos.
33	33	750mm wide x 600mmhigh x 250mm deep	33	23	Nos.
34	34	AIR VESSEL	34
35	35	Supply and fixing of Air vessel made out of 250mm. Dia, 8 mm thick MS sheet, 1200mm height with air valves on the top and flanged connection to riser, drain arrangement with 25mm dia gunmetal wheel valves, with required accessories, pressure gauge and paintimg with synthetic enamel plant of approved shades as required.	35	2	Nos.
36	36	PRESSURE SWITCH	36
37	37	Providing & fixing of pressure switch of approved make in MS pipe line suitable for line pressure up 15kg/cm2 & including connection with main panel etc as required complete in all respect.	37	3	Nos.
38	38	PRESSURE GAUGE	38
39	39	Providing & fixing S.S Pressure Guage complete as required complete in all respect.	39
40	40	Dia diameter 100mm calibration 0-16kg.	40	12	Nos.
41	41	SPRINKLER HEAD PENDANT TYPE	41
42	42	Supplying and fixing pendant/upright type sprinkler with quartzoid bulb, operating temperature 68/79 degree centigrade of 15mm dia orifice sprinkler head to approved by UL/SN.	42	900	Nos.
43	43	SIDEWALL SPRINKLER	43
44	44	Supplying and Fixing Sidewall Sprinkler rated at 68 / 79degree centigrade, quartzoid bulb type, 15 mm dia orifice sprinler head toapproved by UL/SN complete in all respect.	44	10	Nos.
45	45	ABC TYPE FIRE EXTINGUISHER	45
46	46	Providing and fixing of FIRE EXTINGUISHER,ABC Powder type(stored pressure) as per IS: 15683 complete with all accessories as per manufactures specification ISI mark complete in all respect .CAP. 4 kg	46	18	Nos.
47	47	CO2 TYPE FIRE EXTINGUISHER	47
48	48	Providing and fixing of FIRE EXTINGUISHER,Co2 type as per IS: 15683 complete with all accessories as per manufactures specification ISI mark complete in all respect CAP. 4.5KG	48	18	Nos.
49	49	MECH. FOAM TYPE FIRE EXTINGUISHER	49
50	50	Providing and fixing of FIRE EXTINGUISHER,Mechanical Foam type 9 ltrs type as per IS: 15683, stored pressure type all accessories as per manufactures specification ISI mark complete in all respect.	50	18	Nos.
51	51	GONG BELL 150mm	51
52	52	Supplying and installation control valve C/W water motor gong complete with alarm valve, constant trim, water motor bell, 2 no, pressure Guage, all parts UL listed. Makke Newage complete in all respect (150mm control valve).	52	2	Nos.
53	53	BUTTERFLY VALVE	53
54	54	Supplying, Laying, Testing & Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with rubber Gun Metal seal duly ISI marked complete with rubber insertionn, nuts, bolts and washers, matching flanges of required thickness, etc complete as per specification.	54
55	55	200mm	55	1	Nos.
56	56	150mm	56	25	Nos.
57	57	100mm	57	2	Nos.
58	58	80mm	58	35	Nos.
59	59	NON RETURN VALVE	59
60	60	Providing & fixing Dual plate check valve flanged and class PN-1.6 as per IS with nitrile seat SS shaft & spring in pipe lines including joining & cost of nuts, bolts, rubber insertion etc complete.	60
61	61	150mm	61	15	Nos.
62	62	100mm	62	2	Nos.
63	63	GM BALL VALVE	63
64	64	Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines\nincluding all carriages complete.	64
65	65	25mm i/d Brass Ball valves	65	25	Nos.
66	66	TERRACE WATER TANK	66
67	67	Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.	67
68	68	Triple Layer (Cap. 10000 ltrs x 08 No.)	68	80000	Ltrs
69	69	JOCKEY PUMP	69
70	70	Supply, installation, testing & Commissioning of Kirloskar make pump in back pull out design having 50mm suction, 25 mm delivery, CI casing, bronze impeller and CS shaft with gland packed arrangement coupled on common baseplate to Kirloskar/ABB/CGL (at our option) make 11KW /10 HP, 2900 RPM TEFC sq. cage induction motor suitable for 3 phase, 415V, 50 Hz AC supply confirming to through suitable flexible coupling. The pumpset is suitable for following duties:\nTotal head : 70m\nFlow : 10.8 m^3/hr (180 lpm)\n	70	2	Each
71	71	ELECTRIC MOTOR PUMP	71
72	72	Supply, installation, testing & Commissioning of pump model in back pull out design (end suction type) having 125mm suction, 100 mm delivery, CI casing, bronze impeller and CS shaft with gland packed arrangement coupled on common baseplate to Kirloskar/ABB/CGL (at our option) make 55KW/75HP, 2900 RPM TEFC sq. cage induction motor suitable for 3 phase, 415V, 50 Hz AC supply confirming to through suitable flexible coupling. The pumpset is suitable for following duties:\nTotal head : 70m\nFlow : 171m^3/hr (4500 lpm)\n	72	1	Each
73	73	SPRINKLER PUMP	73
74	74	Supply, installation, testing & Commissioning of pump model in back pull out design (end suction type) having 125mm suction, 100 mm delivery, CI casing, bronze impeller and CS shaft with gland packed arrangement coupled on common baseplate to Kirloskar/ABB/CGL (at our option) make 55KW/75HP, 2900 RPM TEFC sq. cage induction motor suitable for 3 phase, 415V, 50 Hz AC supply confirming to through suitable flexible coupling. The pumpset is suitable for following duties:\nTotal head : 70m\nFlow : 171m^3/hr (2850lpm)\n	74	1	Each
75	75	DIESEL ENGINE	75
76	76	Supply, installation, testing & Commissioning of MAKE FACTORY ASSEMBLED DIESEL ENGINE DRIVEN PUMPSET in back pull out design having 125mm suction, 100 mm delivery CI casing, bronze impeller, C-40 shaft with gland packed arrangement coupled on common MS fabricated baseframe vertical water cooled diesel engine complete with 12 V battery start arrangement, air cleaner, exhaust silencer (without piping), fuel filter, developing 112 bhp at 1800 RPM. Engine with twin belt driven radiator and complete with engine starting panel, Battery & AVM pads. \nTotal head : 70m \nFlow : 273 m^3/hr (4500 lpm) \n\n \n	76	1	Each
77	77	Hydrant Panel	77
78	78	Providing & fixing of Hydrant Electrical Panel of cubical type floor mounted power cum control of Jockey Pump 1 No. & Electrical Pump 2 No. having MCCB 400 Amp 3 Pole 36 KA, MCCB 180 Amp 3 Pole Contactor 110 Amp. Contactor 180 Amp Relay 66-110, Relay 14-23, SSP, SP,MCCB 63 Amp, 3 Pole, Digital Meter Set, Hardware, Aluminum Bus bar Set, Wire & Thimble, Panel Box 16 Gauge. Complete in all respect.	78	1	Nos.
79	79	CABLE FOR PUMP ROOM including cable tray and all accessories required at site as per required size of the cable etc.	79	1	Job

Also Visit

Tenders

Punjab Tenders

Machinery and Tools Tenders

Agricultural Machinery Tenders

Irrigation System Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Providing And Installation Of Fire Fighting And Sprinkler System In New Bus Stand , Rajpura Road , Patiala, New Bus Stand, Rajpura Road, Patiala-Punjab

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Providing And Installation Of Fire Fighting And Sprinkler System In New Bus Stand , Rajpura Road , Patiala, New Bus Stand, Rajpura Road, Patiala-Punjab

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us