|
| 1 | Trimming of grass, shrubs and weeds from the shoulders/berms and disposing off the same to suitable locations etcetera complete |
| 2 | Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed. |
| 3 | Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading or stacking as directed. |
| 4 | Excavation for catch / side water gutter in Hard murum and boulder strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed. |
| 5 | Excavation for catch / side water gutter in Soft rock strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed. |
| 6 | Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 metre, not less than 97% of standard Proctor density after laying them in layers of 20 centi metre to 30 centi metre with Power roller. |
| 7 | Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50 metre including all lifts, laying in layers of 20 centi metre to 30 centi metre thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etcetera complete. (Material obtained from departmental Land) |
| 8 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I(Using Screening Type A (13.2) mili metre Aggregate) |
| 9 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II(Using Screening Type B (11.2 mm) Aggregate) |
| 10 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 11 | Spreading hard murum/ soft murum/ gravel or kankar for side width complete |
| 12 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etcetera complete. |
| 13 | Providing and constructing 75 mili metre thick ModifiedPenetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mili metre stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubbleobtained by blasting) heating and spraying thebitumen of specified grade @ 2 Kilogram/Square Metre, spreading 12 mili metre size chips compacting with three wheel static roller having weight 8 to 10 Metric Tonne. to achieve the desired degree of compaction as per Technical Specification Clause 506 etcetera complete.Including picking of existing Water Bound Macadam surface. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 14 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry Black Topped surface 3 Kilogram/10 Square metre (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 15 | Open Graded Premix Surfacing- Providing and Laying Open Graded Carpet 20 mili metre thickness composed of 13.2 mili metre to 5.6 mili metre aggregates premixed with bituminous binder transported to site with Vehicle Tracking System (VTS), laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller( over Black Topped Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 16 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified gradepreparing existing road surface, heating and applying bitumen @ 0.98 Kilogram/Square metre by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 Metric Tonne. etcetera complete. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 17 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 Metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.50 metre) By Mechanical Means |
| 18 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etcetera complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etcetera) |
| 19 | Providing cast in situ / ready mix M-10 grade cement concrete for head walls of Cross Drainage Work / retaining walls etcetera including necessary form work, compaction, finishing and curing etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer)with SCADA with fine aggregates of required specifications (Natural sand / VSI sand finely washed etcetera ), cement 4.05 bags/Cubic Metre) |
| 20 | Providing cast in situ / ready mix block of M-10 cement concrete with circular or other shaped opening for waterway including necessary formwork, compaction, finishing and curing etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer)with SCADA with fine aggregates of required specifications (Natural sand / VSI sand finely washed etcetera ), cement 4.05 bags/Cubic Metre) |
| 21 | Providing selected hard murum filling including laying in layers of 15 to 20 centi metre with watering and compacting etcetera complete. |
| 22 | Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 900 mili metre diameter in proper line, level and slope etcetera complete. |
| 23 | Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 1000 mili metre diameter in proper line, level and slope etcetera complete. |
| 24 | Providing dry rubble stonepitching 23 centi metre (about 9 ) thick including all material, quarry spalls, labour etcetera complete. |
| 25 | Providing and fixing stream lined M-20 grade Reinforced Cement Concrete guard stone including mild steel bar reinforcement etcetera complete. |
| 26 | Transportation for Dispoing excavated material as directed by Engineer in Charge etc. complete. |
| 27 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etcetera\", having rectangular shape of 1.20 metre x 0.90 metre size made out 18 gauge (1.25 mili metre) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etcetera with approved colour shade paint complete, on Mild Steelangle of size 35 x 35 x 3 mili metre frame with properly cross braced Mild Steel angles of size 35 mili metrex35 mili metrex3 mili metre duly painted including Two Mild Steel angle iron posts of size 65 mili metre x 65 mili metre x 6 mili metre, 3.65 meter long painted with alternate black and white bands of 25 Centi Metre width including all fixtures etceteraand fixing the boards in 1:4:8 concrete block of size 60 Centi Metre x 60 Centi Metre x 75 Centi Metre including, excavation, refilling, transportation, and labour etcetera complete. Spec. No. As directed by Engineer in Charge |
| 28 | Excavation for foundationin earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directedetcetera complete.a) Upto 1.50 metre lift Normal Rate |
| 29 | Excavation for foundationin earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directedetcetera complete.b) 1.50 metre to 3.00 metre lift, Add 10% |
| 30 | Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthen bunds etcetera as may be necessary for foundation and other parts of the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etcetera complete. (prior approval of Superintending Engineer will be necessary) |
| 31 | Providing and filling sand in foundation trenches / below Raft as per drawing and technical specifications etcetera complete. (Coarse Sand and Gravel ) |
| 32 | Providing and laying in situ / ready mix / ready mix M-10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etcetera complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer)with natural /artificial sand) |
| 33 | Providing and laying in situ / ready mix controlled grade of M-20 of trap /granite /quartzite /gneiss metal for Reinforced Cement Concrete works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etcetera complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer)with fine aggregates of required specifications (Natural sand / VSI sand finely washed etcetera ), excluding reinforcement) |
| 34 | Providing, cutting, bending, hooking, tyingand laying in position Thermo Mechanical Treated (TMT) FE 500 steel bars for reinforcement for all Reinforced Cement Concrete works as per detailed drawings etcetera complete. |
| 35 | Prividing and fixing pressure relief pipes of 110 mili metre diametre of Polyvenyle Chloride as per drawing for Reinforced Cement Concrete Raft,galaries returns, abutments, wing wall etcetera complete. |
| 36 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etcetera complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etcetera) |
| 37 | Providing and laying in situ / ready mix / ready mix M-10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etcetera complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer)with natural /artificial sand) |
| 38 | Providing and filling in well with sand/ rubble and sand/ shingle and sand including compacting between the top and bottom plugs etcetera Complete |
| 39 | Providing and laying in situ / ready mix M-25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work in solid/ deck slab etcetera including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcementetcetera complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications (Natural sand / VSI sand finely washed etcetera )i) Height up to 5 metre, normal rate. ii) Height 5 to 7.50 metre, add 5 percent extra over basic rate.iii) Height 7.50 to 10 metre, 7.50 percent extra. iv) Over 10 metre Height, add 10 percent extra for every 2.50 metre rise. |
| 40 | Providing expansion joints with 25 mili metre thick bituminous pad as per detailed drawings etcetera complete. |
| 41 | Providing and laying in situ / ready mix M-20 Reinforced Cement Concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etcetera complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand / VSI sand finely washed etcetera ) |
| 42 | Providingand laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etcetera complete. |
| 43 | Providing and laying in situ / ready mix M-20 Cement Concrete of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etcetera complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand / VSI sand finely washed etcetera ) |
| 44 | Providing trap/ granite/ quartzite/ gneiss rubble filling over haunches and arches including hand packing etcetera complete. |
| 45 | Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50 metre including all lifts, laying in layers of 20 centi metre to 30 centi metre thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etcetera complete. (Material obtained from departmental Land) |
| 46 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20 centi metre to 30 centi metre breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50 metre to 300 metre inclusive from the site of excavation to the site of deposition as directed. |
| 47 | Providing railing of mild steel angle post 2.0 metre center to center of section 75 mili metre x 75 mili metre x 10 mili metre or equivalent I/C section of height 1.05 above bridge surface with minimum anchor length of 30 centi metre including hold fast of 25 mili metre diameter MS bar welded at the bottom and concreting of 1:3:6 of size 30 centi metre x 30 centi metre x 30 centi metre with three rows of 40 mili metre B class Galvanised Iron pipe provided at 30 centi metre on center to center including scaffolding and one coat of anticorrosive paint with two coats of oil painting, curing of concrete etcetera complete. |
| 48 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etcetera complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etcetera) |
