|
| 1 | Dismantling of existing Black Topped Surface (flexible Pavement) to a depth of 50 mili metre manually including loading of dismantled material to transport vehicle at site excluding lead charges |
| 2 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed. |
| 3 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.5 metre) By Mechanical Means |
| 4 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at Optimum Moisture Content, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material |
| 5 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I(Using Screening Type A (13.2) mili metre Aggregate) |
| 6 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II(Using Screening Type B (11.2 mm) Aggregate) |
| 7 | Providing soling using 80 mili metre size trap metal in 15 centi metre layer including filling voids with Crushed sand/grit, ramming, watering etcetera complete. |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etcetera complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etcetera) |
| 9 | Providing cast in situ / ready mix M-20 grade cement concrete for head walls of Cross Drainage Work / retaining walls etcetera including necessary form work, compaction, finishing and curing etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer)with SCADA |
| 10 | Providing and laying in-situM-30 Grade unreinforced plain cement concretepavementover a prepared sub base with 43 grade cement, coarse and fine aggregate( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradationas per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcheras per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver, compacted and finished in a continuous operation, finishing to lines and gradesas directed by Engineer-in-charge and curingby curing compound /by providing cement vata in cement Mortar 1:8 @0.6 metre X 0.6 metre centre to centre, admeasuring 80 mili metre at bottom and 40 mili metre at top withdepth of 75 mili metre and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. |
| 11 | Providing and fixing in position Thermo Mechanical Treated (TMT) FE 500, 25 mili metre diametre dowel bars precoated with anticorrosive epoxy paint of required diametre 60 centi metre Long and at 30.00 centi metre centre to centre and wherever directedincluding handling, straightening, necessary cutting supported by Thermo Mechanical Treated (TMT) FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etcetera complete. |
| 12 | Cutting transverse contraction joints 3 to 4 mili metre wide and depth 60 mili metre .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etcetera complete including subsequent widening of the groove 8 to 10 mili metre wide at top having depth of 15 mili metre as directed by Engineer incharge. |
| 13 | Providing to contraction joints polysuphide sealant (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealant reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mili Meter 4 mili metre joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealant is applied and applying primer. (A) Contraction and longitudinal joints (15 mili metre deep x 8 mili metre wide) |
| 14 | Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet Confirming to Indian Standard 3395 : 1997 below concrete pavement including all materials and labour complete. |
| 15 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 16 | Spreading hard murum/ soft murum/ gravel or kankar for side width complete |
| 17 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etcetera complete. |
| 18 | Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etcetera complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer)with SCADA with fine aggregates of required specifications (Natural sand / VSI sand finely washed etcetera ), cement 6.40 bags/Cubic Metre) |
| 19 | Providing, cutting, bending, hooking, tyingand laying in position Thermo Mechanical Treated (TMT) FE 500 steel bars for reinforcement for all Reinforced Cement Concrete works as per detailed drawings etcetera complete. |
| 20 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450 mili metre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etcetera complete. |
| 21 | Providing and constructing 75 mili metre thick ModifiedPenetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mili metre stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubbleobtained by blasting) heating and spraying thebitumen of specified grade @ 2 Kilogram/Square Metre, spreading 12 mili metre size chips compacting with three wheel static roller having weight 8 to 10 Metric Tonne. to achieve the desired degree of compaction as per Technical Specification Clause 506 etcetera complete.Including picking of existing Water Bound Macadam surface. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 22 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry Black Topped surface 3 Kilogram/10 Square metre (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 23 | Open Graded Premix Surfacing- Providing and Laying Open Graded Carpet 20 mili metre thickness composed of 13.2 mili metre to 5.6 mili metre aggregates premixed with bituminous binder transported to site with Vehicle Tracking System (VTS), laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 24 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified gradepreparing existing road surface, heating and applying bitumen @ 0.98 Kilogram/Square metre by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 Metric Tonne. etcetera complete. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 25 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etcetera\", having rectangular shape of 1.20 metre x 0.90 metre size made out 18 gauge (1.25 mili metre) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etcetera with approved colour shade paint complete, on Mild Steelangle of size 35 x 35 x 3 mili metre frame with properly cross braced Mild Steel angles of size 35 mili metrex35 mili metrex3 mili metre duly painted including Two Mild Steel angle iron posts of size 65 mili metre x 65 mili metre x 6 mili metre, 3.65 meter long painted with alternate black and white bands of 25 Centi Metre width including all fixtures etceteraand fixing the boards in 1:4:8 concrete block of size 60 Centi Metre x 60 Centi Metre x 75 Centi Metre including, excavation, refilling, transportation, and labour etcetera complete. Spec. No. As directed by Engineer in Charge |
