Military Engineer Services-MES has published Repair/ Replacement Of Unserviceable Gi /Ci Lines Unserviceable Motor Control Panels Pvc Tanks Float Valve Gate Valves Sluice Valves Cleaning Of Sumps An Rcc Tanks And Connected Misc E/M Works At Bhdc Other Unit Area Under Ge ( E/M ) Base Hosp. Submission Date for this Tender is 05-07-2021. Motor Work Tenders in GE E/M BASE HOSPITAL DELHI CANTT Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 16-Jun-2021 | EXTENDEDDATE | Date | 28-06-2021 |
| 2 | 17-Jun-2021 | REVISED BOQ | BOQ | 28-06-2021 |
| 3 | 28-Jun-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-07-2021 |
| Name of Work: REPAIR/ REPLACEMENT OF UNSERVICEABLE GI /CI LINES, UNSERVICEABLE MOTOR, CONTROL PANELS, PVC TANKS, FLOAT VALVE, GATE VALVES, SLUICE VALVES, CLEANING OF SUMPS & RCC TANKS AND CONNECTED MISC E/M WORKS AT BHDC, OTHER UNIT AREA UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10 | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down the raising main pipe of different sizes overhead tank and M & L in replacement rubber gasket joint/run lead joint of raising main to overhead tank of capacity 50000/100000 gallons at 15/18/21m height from ground level & refixing the raising main in old position complete all as specified and as directed. | 20 | Each Job | |
| 2 | 2 | S & F MS Frame work as in valve chamber/Sump covers including cutting, Jointing, welding & necessary fabrication including provn of MS angle iron and MS plates with hinges & locking arrangement properly making the chamber/cover in shape for easy to open / close including dismantling old MS Work of any description complete all as specified and as directed. | 550 | Kg | |
| 3 | 3 | Collecting Water sample from Main pump house sump and carried out Chemical/ Bacteriological Analysis and Portability Test of water through Sriram Test Lab/ Micro-Engineering Testing Lab/ Bharat Testing Lab and submitting the report to Engr-in-Charge | 10 | Each Job | |
| 4 | 4 | M&L in replacement PTMT float valve with EPOXY coated Aluminium rod and HD Ball suitable for 40mm bore pipe complete all as specified and as directed. | 10 | Each | |
| 5 | 5 | All as per Srl item No. 4.00 here-in-before but suitable for 25mm bore pipe complete all as specified and as directed. | 150 | Each | |
| 6 | 6 | All as per Srl item No. 4.00 here-in-before but suitable for 20mm bore pipe complete all as specified and as directed. | 250 | Each | |
| 7 | 7 | All as per Srl item No. 4.00 here-in-before but suitable for 15mm bore pipe complete all as specified and directed. | 280 | Each | |
| 8 | 8 | Taking down existing water storage tank and S&F rotational moulded polyethylene multilayer water storage tank of capacity 1000 litre (cylindrical vertical with closed top) hoisted and fixed in position on existing wall, stage, roof or RCC staging including complete connection of inlet and out let pipe, tank nipple, float valve etc. fixing of GI pipe (over flow) & washout pipe to the nearest rain water drain complete all as specified and as directed. | 1 | Each | |
| 9 | 9 | All as per Srl item No. 8.00 here-in-before but Capacity 2000 Litres complete all as specified and as directed. | 2 | Each | |
| 10 | 10 | S&F in replacement Gun metal gate valve with brass spindle including iron wheel suitable for 50 mm bore pipe complete all as specified and as directed. | 10 | Each | |
| 11 | 11 | All as per Ser Item No 10.00 here-in-before but suitable for 40 mm bore pipe complete all as specified and as directed. | 5 | Each | |
| 12 | 12 | All as per Ser Item No 10.00 here-in-before but suitable for 25 mm bore pipe complete all as specified and as directed. | 20 | Each | |
| 13 | 13 | All as per Ser Item No 10.00 here-in-before but suitable for 20 mm bore pipe complete all as specified and as directed. | 25 | Each | |
| 14 | 14 | All as per Ser Item No 10.00 here-in-before but suitable for 15 mm bore pipe complete all as specified and as directed. | 30 | Each | |
| 15 | 15 | M & L in replacement GI tank connection Nipple of size 25mm bore suitable for HDPE Water Tank ISI Marked complete all as specified and as directed. | 80 | Each | |
| 16 | 16 | All as per Ser Item No 15.00 here-in-before but size 20mm complete all as specified and as directed. | 120 | Each | |
| 17 | 17 | All as per Ser Item No 15.00 here-in-before but size 15mm complete all as specified and as directed. | 50 | Each | |
| 18 | 18 | M & L in replacement GI socket (ISI Marked) suitable for 50mm bore pipe complete all as specified and as directed. | 40 | Each | |
| 19 | 19 | All as per Ser Item No 18.00 here-in-before but suitable for 40mm as directed. directed. | 30 | Each | |
| 20 | 20 | All as per Ser Item No 18.00 here-in-before but suitable for 25mm bore pipe complete all as specified and as directed. | 180 | Each | |
| 21 | 21 | All as per Ser Item No 18.00 here-in-before but suitable for 20mm bore pipe complete all as specified and as directed. | 250 | Each | |
| 22 | 22 | All as per Ser Item No 18.00 here-in-before but suitable for 15mm bore pipe complete all as specified and as directed. | 80 | Each | |
| 23 | 23 | M & L in replacement GI union (ISI Marked) suitable for 50mm bore pipe complete all as specified and as directed. | 20 | Each | |
| 24 | 24 | All as per Ser Item No 23.00 here-in-before but suitable for 40mm bore pipe complete all as specified and as directed. | 10 | Each | |
| 25 | 25 | All as per Ser Item No 23.00 here-in-before but suitable for 25mm bore pipe complete all as specified and as directed. | 150 | Each | |
| 26 | 26 | All as per Ser Item No 23.00 here-in-before but suitable for 20mm bore pipe complete all as specified and as directed. | 200 | Each | |
| 27 | 27 | All as per Ser Item No 23.00 here-in-before but suitable for 15mm bore pipe complete all as specified and as directed. | 50 | Each | |
| 28 | 28 | M & L in replacement GI elbow (ISI Marked) suitable for 50mm bore pipe complete all as specified and as directed. | 20 | Each | |
| 29 | 29 | All as per Ser Item No 28.00 here-in-before but suitable for 40mm bore pipe complete all as specified and as directed. | 15 | Each | |
| 30 | 30 | All as per Ser Item No 28.00 here-in-before but suitable for 25mm bore pipe complete all as specified and as directed. | 120 | Each | |
| 31 | 31 | All as per Ser Item No 28.00 here-in-before but suitable for 20mm bore pipe complete all as specified and as directed. | 150 | Each | |
| 32 | 32 | All as per Ser Item No 28.00 here-in-before but suitable for 15mm bore pipe complete all as specified and as directed. | 80 | Each | |
| 33 | 33 | M & L in replacement GI equal Tee (ISI Marked) suitable for 50mm bore pipe complete all as specified and as directed. | 5 | Each | |
| 34 | 34 | All as per Ser Item No 33.00 here-in-before but suitable for 25mm bore pipe complete all as specified and as directed. | 10 | Each | |
| 35 | 35 | All as per Ser Item No 33.00 here-in-before but suitable for 20mm bore pipe complete all as specified and as directed. | 20 | Each | |
| 36 | 36 | All as per Ser Item No 33.00 here-in-before but suitable for 15mm bore pipe complete all as specified and as directed. | 30 | Each | |
| 37 | 37 | M & L in replacement 100 mm (4 inch) long GI Nipple (ISI Marked) suitable for 25mm bore pipe complete all as specified and directed. | 90 | Each | |
| 38 | 38 | All as per Ser Item No 37.00 here-in-before but 75 mm (3 inch) long, suitable for 25mm bore pipe complete all as specified and as directed. | 100 | Each | |
| 39 | 39 | All as per Ser Item No 37.00 here-in-before but 50 mm (2 inch) long, suitable for 25mm bore pipe complete all as specified and as directed. | 110 | Each | |
| 40 | 40 | All as per Ser Item No 37.00 here-in-before but 100 mm (4 inch) long, suitable for 20mm bore pipe complete all as specified and as directed. | 120 | Each | |
| 41 | 41 | All as per Ser Item No 37.00 here-in-before but 75 mm (3 inch) long, suitable for 20mm bore pipe complete all as specified and as directed. | 120 | Each | |
| 42 | 42 | All as per Ser Item No 37.00 here-in-before but 50 mm (2 inch) long, suitable for 20mm bore pipe complete all as specified and as directed. | 100 | Each | |
| 43 | 43 | All as per Ser Item No 37.00 here-in-before but 100 mm (4 inch) long, suitable for 15mm bore pipe complete all as specified and as directed. | 40 | Each | |
| 44 | 44 | All as per Ser Item No 37.00 here-in-before but 75 mm (3 inch) long, suitable for 15mm bore pipe complete all as specified and as directed. | 40 | Each | |
| 45 | 45 | All as per Ser Item No 37.00 here-in-before but 50 mm (2 inch) long, suitable for 15mm bore pipe complete all as specified and as directed. | 40 | Each | |
| 46 | 46 | M&L for run lead jointing to water mains spigot and socket end 150 mm bore pipe complete all as specified and as directed. | 15 | Each | |
| 47 | 47 | All as per Ser No 46.00 here-in-before but for 100 mm bore pipe complete all as specified and as directed. | 20 | Each | |
| 48 | 48 | All as per Ser No 46.00 here-in-before but for 80 mm bore pipe complete all as specified and as directed. | 10 | Each | |
| 49 | 49 | M&L in replacement cast iron body sluice valve, stainless steel stem, non raising wedged gates with iron wheel head, PN-1.6, as per IS-14846, including flanged joints suitable for 250 mm bore pipe complete all as specified and as directed. | 1 | Each | |
| 50 | 50 | All as per Ser No 49.00 here-in-before but suitable for 200 mm bore pipe complete all as specified and as directed. | 1 | Each | |
| 51 | 51 | All as per Ser No 49.00 here-in-before but suitable for 150 mm bore pipe complete all as specified and as directed. | 2 | Each | |
| 52 | 52 | All as per Ser No 49.00 here-in-before but suitable for 100 mm bore pipe complete all as specified and as directed. | 4 | Each | |
| 53 | 53 | All as per Ser No 49.00 here-in-before but suitable for 80 mm bore pipe complete all as specified and as directed. | 2 | Each | |
| 54 | 54 | S&F in replacement CI fittings such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing of double socket etc) tee, single branch pieces, 'Y' junction, double branch cross (all sockets or socket and spigot) collars, caps and plugs suitable for pipes of size up to 150 mm bore complete all as specified and as directed. \n | 500 | Kg | |
| 55 | 55 | M&L in replacement Direct-on-Line Starter in steel sheet enclosure type, motor rating AC-3 Duty, 415 V, 3-Phase, relay maximum range 13-22 Amp, MK1 DOL suitable for 5 HP to 7.5 HP pump sets complete all as specified and as directed. | 2 | Each | |
| 56 | 56 | All as per Srl item No 55.00 here-in-before but Single Phase Starter suitable for 0.5 HP Monoblock pump set relay maximum range 4-6.5 Amp, type-MHO (Coil operated) complete all as specified and as directed. | 2 | Each | |
| 57 | 57 | Excavation in trenches, not exceeding 1.5 m wide & not exceeding 1.5 metre in depth for laying of GI/CI Pipes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out complete all as specified and as directed. | 300 | Cum | |
| 58 | 58 | Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed. | 30 | Cum | |
| 59 | 59 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed. | 270 | Cum | |
| 60 | 60 | S & F in replacement PVC tank cover suitable for PVC tank of size 1000/2000 Litres including PVC hinges for locking system complete all as specified and as directed. | 50 | Each | |
| 61 | 61 | S & F in replacement Power Contractor type MNX, 25 Amp, MNX-25 complete all as specified and as directed. | 15 | Each | |
| 62 | 62 | S & F in replacement Power Contractor type MNX, 18 Amp, MNX-18 complete all as specified and as directed. | 8 | Each | |
| 63 | 63 | S & F in replacement Single Phasing Preventer 415 V, 50 Hz, Phase Failure Relay, complete all as specified and as directed. (Make- Minilec Protective Relay Put Ltd Model: VSP2 or equivalent model of L&T / Siemens) | 3 | Each | |
| 64 | 64 | Supply only CALCIUM HYPO CHLORITE 65% to 70% (Calcium based granular disinfectant for water treatment more stable than Chlorine Gas, and stronger than Bleaching Powder, and Sodium Hypochlorite) and contained appropriate quantities of dispersants/corrosion inhibitors to prevent encrustation/scaling in distribution system packed in 40/45 Kg Plastic Drums and contain complete all as specified and as directed. \nNote: (i) Make of CALCIUM HYPO CHLORITE granules shall be as approved by Delhi Jal Board (ii) Supplier or contractor must submit test certificate from the govt. certified labs/institute. | 14 | Drum \n(45 Kg Each) | |
| 65 | 65 | S&F in replacement submersible copper cable flat 4 Sqmm, three core, complete all as specified and as directed. | 120 | RM | |
| 66 | 66 | S&F in replacement submersible copper cable flat 6 Sqmm, three core complete all as specified and as directed. | 120 | RM | |
| 67 | 67 | S&F prefabricated MS cage for water storage tank made out of MS Angle iron frame of size 35mm x 35mm x 5mm in cubical shape welded with wire mesh of 2 mm dia on five side having opening arrangement, nut bolts of any size and shape 01 Nos (Approx weight 90 Kg each) including hoisting and fixing of protection cage over existing service tank of capacity 1000 Litre at roof level, duly painted with two coat of synthetic enamelled paint over and including a coat of red oxide primer including grouting in PCC 1: 3: 6 complete all as specified and as directed. | 4 | Each | |
| 68 | 68 | All as per ser item No 67.00 here in before but for PVC tank of capacity 2000 Litre (Approx weight 160 Kg) complete all as specified and as directed. | 2 | Each | |
| 69 | 69 | Taking up or down steel tubing of size 25mm and connections, including cleaning for refixing or removal from site complete all as specified and as directed. | 350 | RM | |
| 70 | 70 | All as per Ser Item No 69.00 here-in-before but size 20 mm complete all as specified and as directed. | 400 | RM | |
| 71 | 71 | All as per Ser Item No 69.00 here-in-before but size 15 mm complete all as specified and as directed. | 100 | RM | |
| 72 | 72 | Refixing old steel tubing of size 25mm and connections in new or old position (walls, ceiling, floors, etc) including providing and fixing new GI Fittings complete all as specified and as directed. | 350 | RM | |
| 73 | 73 | All as per Ser Item No 72.00 here-in-before but size 20 mm complete all as specified and as directed. | 400 | RM | |
| 74 | 74 | All as per Ser Item No 72.00 here-in-before but size 15 mm complete all as specified and as directed. | 100 | RM | |
| 75 | 75 | S&F in replacement Fully automatic star delta starter 440 V 3 phase 50 Hz suitable for 15HP submersible motor (14-23A) including connection to the wire complete all as specified and as directed. | 5 | Each | |
| 76 | 76 | Disconnection of electric connection from LT control panel & starter of submersible pumping set any size and removing the pipe line connection from discharge side, taking out submersible pumping set along with column pipe from bore well with the help of chain pulley block including transportation to workshop for repair complete all as specified and as directed. | 11 | Each Job | |
| 77 | 77 | Lowering of submersible pumping set any size after repair and re-connecting with existing pipe and making electrical connection with the panel board making water proof joint of submersible cable including replacement of rusted nuts, bolts, rubber gasket and clamp including transporting from workshop after repair complete all as specified and as directed.\nNote : Spare parts used in repair/replacement shall be paid under relevant item of this schedule as "Supply only" | 11 | Each Job | |
| 78 | 78 | M&L for rewinding of submersible motor with copper winding wire of existing gauge after removing the old wire and insulated material clearing of stator slots and making good winding, all insulating material for submersible motor of capacity 10 HP complete all as specified and as directed.\n | 4 | Each Job | |
| 79 | 79 | All as per Ser Item No 78.00 here-in-before but Capacity 7.5 HP complete all as specified and as directed. | 3 | Each Job | |
| 80 | 80 | All as per Ser Item No 78.00 here-in-before but Capacity 5 HP complete all as specified and as directed. | 2 | Each Job | |
| 81 | 81 | Supply only in replacement following spare parts of submersible pump set 5 HP to 10 HP capacity complete all as specified and as directed:- | |||
| 82 | 81.01 | GM bearing bush | 8 | Each | |
| 83 | 81.02 | Rotor sleeve. | 10 | Each | |
| 84 | 81.03 | Water seal & Cable seal | 10 | Each | |
| 85 | 81.04 | Thrust bearing. | 8 | Each | |
| 86 | 81.05 | Thrust plate. | 9 | Each | |
| 87 | 81.06 | Impeller gun metal | 10 | Each | |
| 88 | 81.07 | Distance sleeve CI | 8 | Each | |
| 89 | 81.08 | GM Neck ring. | 10 | Each | |
| 90 | 81.09 | Remetalling, welding & turning of impeller complete all as specified and as directed. | 14 | Each | |
| 91 | 81.1 | Remetalling, welding, turning & facing of rotor complete all as specified and as directed. | 14 | Each | |
| 92 | 81.11 | Remetalling, welding, turning & facing of pump shaft complete all as specified and as directed. | 14 | Each | |
| 93 | 81.12 | Guide Bush. | 8 | Each | |
| 94 | 81.13 | Cable seal joint distance sleeve CI. | 14 | Each | |
| 95 | 81.14 | Cable joint water proof for submersible pump. | 14 | Each | |
| 96 | 82 | Attending complaints of external water supply installation as when required / call up by this office for non functional of bore well submersible pump installation, other water supply installation for no electric supply / no water supply due to any defects in LT panels in electric control items, or any water supply mains / distribution line or defects in control valves i.e. CI Sluice valves, Non return valves, gate valves, ball valves, foot valves etc of any size laid in trenches of 80 / 100 /150 / 200 / 250 mm dia & above including leakage of CI/ GI pipe line and fittings making lead joints / flange joints/ rubber joints, excavation and refilling of trenches to make the water supply installation functional round the clock complete all as specified and as directed. | 450 | Each Complaint | |
| 97 | 82.01 | Notes:- (i) Minor repair shall be carried out on spot and other major item shall be measured & paid separately. \n(ii) Major items replaced as "supply and fixing" under respective item of this schedule shall not be payable under this item.\n(iii) Adequate tradesman /supporting manpower shall be deployed by contractor and they shall be present on all working days including Saturdays and holidays from 0930 hrs to 1800 hrs for maintenance of above mentioned work. The supervisor /site Engineer of the contractor shall be forwarded detailed instructions by concerned AGE/JE every morning for attending complaints on daily basis. The persons shall be detailed by AGE concerned every morning for attending complaints on daily basis. \n(iv) The complaints received before 1300 hrs shall be attended on same day. The complaints received after 1400 hrs shall be attended on the next working day before 1300 hrs. If complaints shall not attended as per schedule, a penalty of Rs. 500/- shall be imposed on contractor for each complaint for each day. \n(v) Any delay in non-completion of complaints shall immediately be communicated to AGE/JE. \n\n | |||
| 98 | 82.02 | Notes (Contd...):- (vi) Complaint register & complaints slips shall be maintained by the contractor rep. After completion of complaint the rep of contractor shall obtained feedback and signature of user. Payment against these items shall be made after due verification of complaint register & complaint slips by JE & Engineer-in-Charge. \n(vii) All Electrician/ Pipe Fitter / Plumber shall wear proper uniform, failing which a recovery of Rs 200/- per shift per person shall be recovered from the contractor's dues. \n(viii) The payment of contractor's employee shall be made through nationalized bank account of individual and the proof of transaction and the contractor shall submit the same with bank account pass book of individual within 15 days of acceptance otherwise a recovery shall be made a sum of Rs 200/- per shift per employee from the contractor's dues. | |||
| 99 | 83 | Disconnecting of electrical connection from panel board and Taking out electric motor or open well submersible pump of capacity 7.5 HP/ 15 HP/ 20 HP/ 40 HP from the base plate of pump set after opening the nut bolts and transporting the motor to workshop and after repairing the motor, re-installing & testing complete all as specified and as directed. | 5 | Each | |
| 100 | 84 | All as per Ser Item No 83.00 here-in-before but for mono block pump set in different location of BHDC area of capacity 0.5 HP/ 1 HP/ 2 HP/ 3 HP complete all as specified and as directed. | 16 | Each | |
| 101 | 85 | Opening the electric induction motor of capacity 40 HP and taking out the unserviceable winding wire complete and cleaning the slots, rewinding the motor with super enamelled copper winding wire of gauge same as existing gauge including all other insulating material, (i.e. cotton tap, PVC tap, PVC sleeve glass pipe, varnish) complete all as specified and as directed. | 2 | Each Job | |
| 102 | 86 | All as per Ser Item No 85.00 here-in-before but Capacity of induction motor- 15 HP complete all as specified and as directed. | 2 | Each Job | |
| 103 | 87 | All as per Ser Item No 85.00 here-in-before but Capacity of induction motor- 7.5 HP complete all as specified and as directed. | 1 | Each Job | |
| 104 | 88 | All as per Ser Item No 85.00 here-in-before but Capacity of Monoblock pump set 2/3 HP complete all as specified and as directed. | 3 | Each Job | |
| 105 | 89 | All as per Ser Item No 85.00 here-in-before but Capacity of Monoblock pump set 0.5/1 HP complete all as specified and as directed. | 13 | Each Job | |
| 106 | 90 | Disconnecting the open well submersible pump of Capacity 20 HP including taking out submersible pump from underground sump, transportation to workshop, and necessary repair works for motor and pump set, Rewinding the motor with super enamelled copper winding wire of existing gauge including all other insulating material, (i.e. cotton tap, PVC tap, PVC sleeve glass pipe, varnish lowering of open well submersible pump set properly, including cleaning of suction/discharge pipe complete all as specified and as directed. | 2 | Each Job | |
| 107 | 91 | M & L for repairing of rain water harvesting UPVC pipe at tin shed or ground including cleaning blockage pipe from leaves, dust etc complete all as per specified and directed | 25 | Each Job | |
| 108 | 92 | Disconnecting the centrifugal pump and repairing the same by replacing unserviceable spare parts including lath work etc and re-assembling the same in original position of 40 HP pump having discharge 25 LPS at 65 Metre head complete all as specified and as directed.\n(Note:- Spare parts required for repaired shall be measured and paid separately under relevant item of this schedule as "Supply only") | 2 | Each | |
| 109 | 93 | Supply only in replacement following spare for DSM 3E pumps of capacity 40 HP, complete all as specified and as directed. Make of spare shall be of same as make of pump installed at site. | |||
| 110 | 93.01 | CI Impellor | 3 | Each | |
| 111 | 93.02 | CI casing wearing ring DEN/ ND. | 3 | Each | |
| 112 | 93.03 | CI Split glands. | 6 | Each | |
| 113 | 93.04 | Ball bearing SKF 6306/6307. | 2 | Each | |
| 114 | 93.05 | Bearing Cap. | 2 | Each | |
| 115 | 93.06 | Key for impeller steel. | 4 | Each | |
| 116 | 93.07 | Impeller nut (steel). | 4 | Each | |
| 117 | 93.08 | Remetalling welding & turning of pump shaft. | 4 | Each | |
| 118 | 93.09 | Stuffing box bush. | 2 | Each | |
| 119 | 93.1 | Gland packing | 6 | Each | |
| 120 | 93.11 | Trey coupling TC-14, C-220 | 2 | Each | |
| 121 | 94 | S&F in replacement CI foot valve suitable for 150 mm bore pipe flange type including nut, bolts & washers etc complete all as specified and as directed. | 3 | Each | |
| 122 | 95 | All as per Ser Item No 94.00 here-in-before but suitable for 80 mm bore pipe complete all as specified and as directed. | 2 | Each | |
| 123 | 96 | S&F in replacement non return valve suitable for 150 mm bore pipe flange type including nut, bolts & washers complete all as specified and as directed. | 2 | Each | |
| 124 | 97 | All as per Ser Item No 96.00 here-in-before but suitable for 100 mm bore pipe complete all as specified and as directed. | 4 | Each | |
| 125 | 98 | All as per Ser Item No 96.00 here-in-before but suitable for 80 mm bore pipe complete all as specified and as directed. | 3 | Each | |
| 126 | 99 | M&L for making rubber gasket joint with 3 mm thick rubber gasket and required size of nuts, bolts for 250 mm bore pipe complete all as specified and as directed. | 15 | Each | |
| 127 | 100 | All as per Ser item No 99.00 here-in-before but for 200 mm bore pipe complete all as specified and as directed. | 5 | Each | |
| 128 | 101 | All as per Ser item No 99.00 here-in-before but for 150 mm bore pipe complete all as specified and as directed. | 30 | Each | |
| 129 | 102 | All as per Ser item No 99.00 here-in-before but for 100 mm bore pipe complete all as specified and as directed. | 15 | Each | |
| 130 | 103 | All as per Ser item No 99.00 here-in-before but for 80 mm bore pipe complete all as specified and as directed. | 10 | Each | |
| 131 | 104 | S & F in replacement Gun metal Ball valve suitable for 50 mm bore pipe complete all as specified and as directed. | 5 | Each | |
| 132 | 105 | All as per Srl item No 104.00 here-in-before but suitable for 25 mm bore pipe complete all as specified and directed. | 15 | Each | |
| 133 | 106 | All as per Srl item No 104.00 here-in-before but suitable for 20 mm bore pipe complete all as specified and as directed. | 20 | Each | |
| 134 | 107 | All as per Srl item No 104.00 here-in-before but suitable for 15 mm bore pipe complete all as specified and as directed. | 25 | Each | |
| 135 | 108 | S&F in replacement pressure pump single phase, 240 V, 0.5 HP, pressure tank capacity - 08 Litre running bar, max flow - 2800 Litre/ 2 Hrs, Model: P-500, 8 Litre Q-20-50 Litre/min, Head - 46 metre, size of inlet/ outlet pipe 25 mm x 25 mm including making necessary GI tubing connection for incoming / outgoing supply with GI tubing 15 mm bore complete all as specified and as directed. Make - Kirloskar/CG/Tycoon. | 3 | Each | |
| 136 | 109 | S&F in replacement pressure pump single phase, 240 V, 1.1 HP, pressure tank capacity - 19 Litre running bar, max flow - 3300 Litre/ 2.5 Hrs, Model: J-600, 19 Litre Q-20-50 Litre/min, Head - 46 metre, size of inlet/ outlet pipe 25 mm x 25 mm, including necessary GI tubing connection for incoming / outgoing supply with GI tubing 15 mm bore complete all as specified as directed. Make - Kirloskar/CG/Tycoon. | 2 | Each | |
| 137 | 110 | M&L taking out existing sluice valve of size 250mm bore from site and refixing the same including, refacing, regrinding, including replacement of gland complete all as specified and as directed. | 10 | Each | |
| 138 | 111 | All as per Srl item No 110.00 here in before but size 200 mm bore complete all as specified and as directed. | 4 | Each | |
| 139 | 112 | All as per Srl item No 110.00 here in before but size 150 mm bore complete all as specified and as directed. | 20 | Each | |
| 140 | 113 | All as per Srl item No 135.00 here in before but size 100 mm bore complete all as specified and as directed. | 30 | Each | |
| 141 | 114 | All as per Srl item No 110.00 here in before but size 80 mm bore complete all as specified and as directed. | 10 | Each | |
| 142 | 115 | M&L for dewatering and cleaning of OH reservoir and underground sumps of following capacities with high pressure water jet to remove all masses, algae and dirt and removal of dirty water along with sludge using sludge machine and disposal of the same to a safe distance and including scrubbing of internal surfaces using industrial vacuum machine and applying of anti bacterial sterilization spray and apply one coat white wash to walls, floors and ceilings internal surfaces of reservoirs and UG sumps of the following capacity complete all as specified as directed:- | |||
| 143 | 115.01 | 100000 gallons capacity over head reservoirs on 21 metre staging (Main pump house) | 1 | Each Job | |
| 144 | 115.02 | 50000 gallons capacity over head reservoirs on 18 metre staging (Main pump house) | 1 | Each Job | |
| 145 | 115.03 | 10000 Litres capacity over head reservoirs on 6 metre staging. (Laundry plant, OT and IRO) | 3 | Each Job | |
| 146 | 115.04 | 25000 gallons capacity under ground sump square type. (Main pump house) | 3 | Each Job | |
| 147 | 115.05 | 50000 gallons capacity under ground sump round type. (Main pump house) | 1 | Each Job | |
| 148 | 115.06 | 500/1000/2000 Litres capacity RCC OH Tanks on 3 to 6 metre staging/ placed on roof (Skin ward, policlinic, ortho I & II and IRO) | 6 | Each Job | |
| 149 | 116 | M & L preparation of surface by removing old paint by scraping with scrap paper/ sand paper and applying two coat of synthetic enamel paint on all pipe lines, sluice valves, NRV, fittings of CI/ MS, Pumping set etc including writing letters SM/MES No. on pumping set with letter size of 10 cm Height complete all as specified and as directed. \nNote:- The painting on Valves/fittings shall be considered in length of pipe line and surface area of pipe shall only be measured for payment purpose. Nothing extra shall be paid on this account. | 250 | Sqm | |
| 150 | 117 | M&L for preparation of surface by removing old paint by scraping with scrap paper/ sand paper and applying two coat of synthetic enamel paint on all steel structure surfaces i.e. ladders of OHR, steel gate, steel shutter, Main pump house Entrance Gate, display board of water supply installation including writing Name of Installation complete all as specified and as directed. | 25 | Sqm | |
| 151 | 118 | M&L for preparation of electrical panel boards by removing old paint by scraping with scrap paper / sand paper and applying two coat of powder coated paint by spray paint complete all as specified and as directed. | 20 | Sqm | |
| 152 | 119 | M & L for PCC 1:2:4 type B-1 using 20 mm Graded stone aggregate as in foundation or repair to sump/ chamber complete all as specified and as directed. | 2 | Cum | |
| 153 | 120 | Supply, laying and testing in replacement 80 mm bore GI column pipe heavy duty, 'C' class, both end flanged, as per IS - 1239 complete including rubber gasket, slot cutting in flanges for passing of submersible cable and nut bolts etc complete all as specified and as directed. | 84 | RM | |
| 154 | 121 | Supply, laying and testing in replacement GI water tubing 100 mm bore, medium grade with all fittings with screwed and socketed joints and fixed in trenches and making good the disturbed surface complete all as specified and directed. | 85 | RM | |
| 155 | 122 | All as per Srl item No. 121.00 here-in-before but 80 mm bore complete all as specified and directed. | 125 | RM | |
| 156 | 123 | All as per Srl item No. 121.00 here-in-before but 50 mm bore complete all as specified and directed. | 300 | RM | |
| 157 | 124 | All as per Srl item No. 121.00 here-in-before but 40 mm bore complete all as specified and directed. | 220 | RM | |
| 158 | 125 | All as per Srl item No. 121.00 here-in-before but 25 mm bore complete all as specified and directed. | 200 | RM | |
| 159 | 126 | All as per Srl item No. 121.00 here-in-before but 20 mm bore complete all as specified and directed. | 150 | RM | |
| 160 | 127 | All as per Srl item No. 121.00 here-in-before but 15 mm bore complete all as specified and directed. | 50 | RM | |
| 161 | 128 | Supply laying and testing in replacement GI water tubing 25 mm bore, medium grade with all fittings with screwed and socketed joints and fixed complete to wall, ceiling or laid in floor etc. and making good the disturbed surface complete all as specified and directed. | 350 | RM | |
| 162 | 129 | All as per Srl item No 128.00 here-in-before but 20 mm bore complete all as specified and directed. | 400 | RM | |
| 163 | 130 | All as per Srl item No 128.00 here-in-before but 15 mm bore complete all as specified and directed. | 100 | RM | |
| 164 | 131 | S&F in replacement non return valve horizontal type, suitable for 25 mm bore pipe, flange type including nut, bolts & washers complete all as specified and as directed. | 8 | Each | |
| 165 | 132 | All as per Ser Item No 131.00 here-in-before but suitable for 20 mm bore pipe complete all as specified and directed. | 8 | Each | |
| 166 | 133 | Supply only in replacement rubber insulating mat class A type, chequered, size 2 Metre x 1 metre x 25 mm thickness, for working voltage 3.3 KV complete all as specified and as directed. Make : Jyoti /Dunlop or Equivalent | 2 | Each | |
| 167 | 134 | S&F in replacement MCCB 4 Pole, 415 Volt fixed type 25 Amp to 100 Amps with breaking capacity 16 KA complete all as specified and as directed. | 4 | Each | |
| 168 | 135 | S & F in replacement Thermal Overload relay with Start & Off/Reset MN-2, Range: 14.0 – 23.0 Amp, complete all as specified and directed. (Make- Siemens Cat No. SS94144 or equivalent model of L&T/Schneider) | 8 | Each | |
| 169 | 136 | S & F in replacement Analog Time Switch FM/1 QUARTZ 240 VAC, 50/60 Hz Type: QT (Daily) for 24 Hrs, complete all as specified and directed. (Make- Siemens Cat No. J648B1 (P) or equivalent model of L&T/Schneider) | 10 | Each | |
| 170 | 137 | Supply, laying, connecting and testing in repair ductile iron (DI) pipe, 100 mm bore, with spigot and socket ends, conforming to IS: 8329/2000 classification, medium grade (K7 class), with screwed and socketed joints, suitable for push-on-joint (Rubber gasket -D jointing) with cement mortar lining inside the pipes and outside zinc coating with bituminous finish coat as per IA 8329/2000 including EPDM rubber joints conforming IS: 5382 of 1985, laid in trenches or laid in floor, including making good the disturbed surface including taking out old rusted/ unserviceable GI/CI/DI pipe 100 mm inner dia by unscrewing and cutting complete all as specified and as directed. | 400 | RM | |
| 171 | 138 | All as per Srl item No 137.00 here-in-before but 150 mm bore complete all as specified and as directed. | 108 | RM | |
| 172 | 139 | S&F in replacement 5000 Litre capacity Rotational moulded polyethylene water storage tank, triple layered, food grain plastic (cylindrical, vertical with closed top), hoisted and fixed in position on existing wall, stage, roof or RCC staging complete all as specified in SSR Part-I including supply and connecting tank nipple, float valve etc., making complete connection of inlet and out let pipe, fixing of GI pipe (over flow) & washout to the nearest rain water drain complete all as specified and as directed. | 4 | Each | |
| 173 | 140 | Supply, laying replacement of connecting XLPE insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables, heavy duty, 1100 Volts grade with standard aluminium conductor of size 16 Sqmm, 4 core complete all as specified and as directed. | 150 | RM | |
| 174 | 141 | S&F in repair MCB DB, 4 ways, TPN, double door, 415 Volts, with 200 Amps rated bus bar, with all fixing material complete all as specified and as directed. | 2 | Each | |
| 175 | 142 | S & F in repair MCB TPN 63Amps, 'C' curve type, 415 Volt complete all as specified and as directed. | 2 | Each | |
| 176 | 143 | S & F in repair MCB, SP, 10 to 32Amp, 240 Volts, 'C' curve type complete all as specified and as directed. | 4 | Each | |
| 177 | 144 | Supply of anti-scaling chemical Make - Indion 8211 Suitable for 500LPH RO plant complete all as specified and as directed. | 70 | Litre | |
| 178 | 145 | Supply, fixing, testing and commissioning in replacement RO feed /filter feed Horizontal Centrifugal pump, CI body and S.S.316 impeller, shaft of SS 316 with mechanical seal, connected to a TEFC induction motor suitable for 400/440 Volts, 3 Phase, 50 cycle, AC supply, capacity / flow rate -2 Cum /Hr, pumping head - 25 to 30 metre, suitable for 500 LPH RO plant, Modal- INDROMATIC - 403, Make- Ion exchange including 150 mm dia pressure gauge with gun metal isolation cock at delivery of each pump with interconnecting pipes, ball/butterfly and non return valves including vibration elimination pads as required all mounted in a common MS fabricated base plate bolted to cement concrete foundation, complete all as specified and as directed. \n | 2 | Each Set | |
| 179 | 146 | S & F in replacement multigrade pressure sand filter (MGF) of vertical cylindrical FRP pressure vessel with dished ends, flow rate- 2 Cum/Hr, size of filter- 13" x 54", Maximum operating pressure 3.00 Kg/Sqcm, test pressure 5.0 Kg/Sqcm, suitable for 500 LPH RO plant, Modal- INDROMATIC-403, Make- Ion exchange complete with initial charge of graded filter sand and underbed material with internal distribution and collection systems with complete set of frontal piping and valves i.e. inlet, outlet, drain, overflow, backwash lines and associated valves, pressure gauges including supporting lugs (for embedding in concrete foundation) and fixing on floor complete as required. The pressure vessel shall be epoxy food grade coated from inside and painted with two coats of enamel paint of approved shade over a coat of red oxide primer outside. Velocity in frontal piping and valves- 1.50 Metre/Sec complete all as specified and as directed. Make- ION EXCHANGE/THERMAX/UV RICH | 2 | Each Set | |
| 180 | 147 | Supply, fixing, testing and commissioning in replacement activated carbon filter (ACF) flow rate- 2 Cum /Hr, size of filter- 13" x 54", Maximum operating pressure 3.00 Kg/Sqcm, test pressure 5.0 Kg/Sqcm, suitable for 500LPH RO plant, Modal- INDROMATIC-403, Make- Ion exchange, complete with initial charge of graded filter sand and underbed material with internal distribution and collection systems with complete set of frontal piping and valves i.e. inlet, outlet, drain, overflow, backwash lines and associated valves, pressure gauges including supporting lugs (for embedding in concrete foundation) and fixing on floor complete as required & the pressure vessel to be epoxy food grade coated from inside and painted with two coats of enamel paint of approved shade over a coat of red oxide primer outside. Velocity in frontal piping and valves- 1.50 Metre/sec complete all as specified and as directed. \nMake- ION EXCHANGE/ THERMAX/UV RICH | 4 | Each Set | |
| 181 | 148 | S&F in replacement special anti scalent dosing system consisting of one HDPE tank of 100 litres capacity with a positive displacement diaphragm dosing pump having variable flow rate of (0-6 LPH), suitable for 500LPH RO plant, Modal- INDROMATIC - 403, Make- Ion exchange, including motor suitable for operation at 240V, single phase, 50 Hertz supply complete with necessary polypropylene piping, valves, strainers & injection fittings for automatic dosing including testing and commissioning complete all as specified and as directed. Make- ION EXCHANGE/ THERMAX/UV RICH | 2 | Each Job | |
| 182 | 149 | Supply, fixing, testing and commissioning in replacement Micron Cartridge Filter suitable for 500LPH RO plant, Modal- INDROMATIC-403, Make- Ion exchange, for flow rate of 6 Cum/Hour, to achieve particle filtration less than 5 micron, including complete unit comprising of Polypropylene (PP) Housing and spun wound polypropylene cartridge, built in pressure relief valve complete with inlet & outlet branches, removable caps for replacement of cartridge, inlet & outlet pressure gauge (one for the Feed line and for CIP System) complete all as specified and directed. Make- ION EXCHANGE/ THERMAX/UV RICH. | 15 | Each | |
| 183 | 150 | Supply, fixing, testing and commissioning in replacement R.O. High Pressure Feed Pumps of positive displacement multi-stage, centrifugal type, pumping head 120m - 01No, pump flow rate Cum /Hour, suitable for a flow rate of 3000 LPH, suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange, having pump construction Stainless steel (S.S. 316) & impeller stainless steel (S.S. 316) and motor TEFC suitable for a supply of 440V, 3 phase, 50 Hertz supply including interconnecting pipes, non return ball/butterfly valves fittings and coupling all mounted on base channel with foundation bolts, & pressure gauges at inlet & outlet of each pump complete all as specified and as directed. Make- ION EXCHANGE/ THERMAX/UV RICH. | 2 | Each Job | |
| 184 | 151 | Supply, fixing, testing and commissioning in replacement indoor package type Reverse Osmosis Modules [R.O. Membranes + R.O. Pressure Tube] suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange of capable to give a net treated water output of 500 LPH, Reverse Osmosis membrane shall be made out of spiral wound multilayer cross linked membrane composite suitable to withstand a pressure of 20 Kg/Sqcm, suitable BSPT/NPT connections used for connecting feed and reject ends. The FRP composite modules shall be complete with all interconnection, necessary instrumentation, valve for sampling, drain, reject & permeate complete all as specified and as directed. \n | 2 | Set of 03 | |
| 185 | 152 | Supply, fixing, testing and commissioning in replacement pH correction system comprising of one No. HDPE (100 litters capacity) dosing tank, having positive displacement diaphragm dosing pump having variable flow rate (0-6 LPH) suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange, motor suitable for operation at 240V, single phase, 50 Hertz power supply. The pump shall be supplied complete with necessary polypropylene piping, valves, strainers & injection fitting for automatic dosing complete all as specified and as directed. \nMake- ION EXCHANGE/THERMAX/UV RICH | 2 | Each Set | |
| 186 | 153 | Supply, fixing, testing and commissioning in replacement IP55 control panel, containing an illuminated selector switch, indicating Power OFF/ON, status/alarm light, motor starter, control relays, and terminal blocks factory suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange, including complete assembling. A Pre-treatment interlock indicator and control shall also be provided to prevent RO operation when Pre-treatment is offline in the backwash or regeneration mode and as required for auto function (with a manual ride over) complete all as specified and as directed. | 4 | Each Set | |
| 187 | 154 | Supply, fixing, testing and commissioning in replacement Flow meter (Rota meter) to measure and control the flow of feed/ product stream/reject stream suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange, complete all as specified and as directed. | 4 | Each | |
| 188 | 155 | Supply, fixing, testing and commissioning in replacement Burden type, 150 mm, Pressure gauges made out of SS 316 (glycerine filled), suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange complete all as specified and as directed. | 4 | Each | |
| 189 | 156 | Supply, fixing, testing and commissioning in replacement On Line Panel mounted digital TDS meter/Conductivity meter (Range 0-1000 PPM), (At RO Outlet) suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange complete all as specified and as directed. | 2 | Each | |
| 190 | 157 | Supply, fixing, testing and commissioning in replacement Pressure switches to control pressure and give high/low pressure trip(Range : 0-450 PSI) suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange complete all as specified and as directed. | 4 | Each | |
| 191 | 158 | Supply, fixing, testing and commissioning in replacement Level switches, to control water level in the output storage tanks & domestic water storage tank, suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange complete all as specified and as directed. | 4 | Each | |
| 192 | 159 | Supply, fixing, testing and commissioning in replacement CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR 11 (operating pressure - 7 Bar @ 82 Deg C and 28 Bar @ 23 Deg C) for pipes from 0.5 Inch to 2 Inch Pipe to be used from 2.5 Inch to 6 Inch, including necessary joining using and including solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe / GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493, suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange complete all as specified and as directed. | 2 | Each Job | |
| 193 | 160 | S&F in replacement UV unit with reactor, cabinet cooling, treatment chamber, electrical panel temperature safety control, lamp out alert, UV radiometer along with UV monitoring readout panel suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange complete all as specified and as directed. \nNote:- The UV dosage shall be >30000uW Sec/Sqcm and the lamp shall be selected based on the flow requirement of respective unit. | 2 | Each Set | |
| 194 | 161 | S&F in replacement Chlorine dosing system, consisting of one FRP/ HDPE tank of 100 litres capacity with a positive displacement diaphragm Dosing pump with a variable flow rate of 0-12 LPH, motor suitable for operation at 240 V, one Phase, 50 Hertz, with necessary poly propylene piping, valves, strainers & injection fittings for system to dose solution to the feed line, as per specification suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange complete all as specified and as directed. | 2 | Each Set | |
| 195 | 162 | Supply only diseasing chemical SERCON -201 suitable for membrane of 500 LPH RO Plant complete all as per specified and as directed. Make-ION EXCHANGE/THERMAX/UV RICH | 105 | Kg | |
| 196 | 163 | Supply only discealing chemical SERCON -202 suitable for membrane of 500 LPH RO Plant complete all as specified and as directed. Make-ION EXCHANGE/THERMAX/UV RICH | 105 | Kg | |
| 197 | 164 | S & F in replacement MS Bend, size 250mm including flange, nut-bolt and welding work complete all as per specified and as directed. | 1 | Each Job | |
| 198 | 165 | S&F in replacement Monoblock water pump set, single phase, 240 V, capacity 1 HP, suction/delivery pipe 25 mm x 25 mm, Head range-6 to 40 metres & discharge range - 3200 to 1600 LPH, fitted with thermal overload protector & IP-44 protection 'B' class of insulation, Both side ball bearing double shielded including necessary GI tubing connection for incoming/ outgoing supply complete all as specified and as directed. | 6 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
