| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Jun-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-06-2021 |
| Name of Work : Repair/ maintenance of summer appliances i.e. water coolers, desert coolers, ac. refrigerators, deep freezers and repair/ overhauling of ceiling fans, exhaust fans, air circulators fresh air fan etc at Kanasar Military Station | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down and Dismantling of ceiling fan 1200mm/1400mm sweep of any make new/old model by opening the cover, separating down rod, rotor and stator assembly, locating the fault and making the fan fully in serviceable condition including replacing the defective worn out screws of the cover, split pin, oiling, and greasing etc. including repainting with synthetic enamel paint by spraying including filling cavities with filler, re-writing of MES No as of original size with stencil, including cleaning of the rating plate with the thinner complete all as specified and directed by Engineer-in-Charge. Note :- Rewindng and parts such as bushings, bearings, condensers, ‘D’ clamps with nuts, quarter pin and rubber seal, down rod, PVC canopies, flexible wire & shaft etc shall be measured and paid for separately under the respective items here-in- after | 300 | Each Job | |
| 2 | 2 | M & L for Re-winding motor of ceiling fan any make/model model size 1200mm sweep with super enameled copper winding wire of existing specification, gauge & weight conforming to IS including insulating material & varnishing the motor windings with good quality varnish complete all as specified and directed by Engineer-in-Charge. Make of winding wire: MILAN/ ATLAS/ CHETAK/ DEVIDAYAL | 50 | Each Job | |
| 3 | 3 | M & L for Re-winding motor of ceiling fan any make/model model size 1200mm sweep with super enameled copper winding wire of existing specification, gauge & weight conforming to IS including insulating material & varnishing the motor windings with good quality varnish complete all as specified and directed by Engineer-in-Charge. Make of winding wire: MILAN/ ATLAS/ CHETAK/ DEVIDAYAL | 250 | Each Job | |
| 4 | 4 | Supply & fix in replacement of ball bearing of suitable size for ceiling fan 1200mm / 1400m sweep . Make: ''NBC/SKF conforming to IS | 150 | Each | |
| 5 | 5 | Supply & fix in replacement of brass bush suitable for ceiling fan any make/model all as per original size/shape/type conforming to IS | 120 | Each | |
| 6 | 6 | Supply & fix in replacement of shaft of ceiling fan as per existing size and shape | 40 | Each | |
| 7 | 7 | Supply & fix in replacement of fan blades for 1200 mm sweep fan as per sample kept in AGE's office. | 40 | Each | |
| 8 | 8 | Supply & fix in replacement of capacitor 230V, 50Hz,2.5MFD for ceiling fan, all as specified & directed. Make :- Asain/ Usha / Universal | 100 | Each | |
| 9 | 9 | Taking down & dismantling of Exhaust fan 225 mm /300 mm /450 mm sweep of any make new / old model by opening the cover, separating the down rod, rotor and stator assembly, locating the fault and making the exhaust fan fully in serviceable condition including replacing the defective worn out screws of cover, split pin, oiling and greasing etc , inculding repainting with synthectic enamel paints by spraying incuding filling cavaties with filler, rewriting of MES No. as original , reassembling the fan and testing complete to the satisfaction of the Engineer in Charge. Note : Rewinding and parts such as bushings, bearings, condensers, D calmps with nut, quarer pin and rubber seal, down rod, PVC canopies, flexible wire & shaft shall be measured and paid for separately under the respective items here-in- after | 60 | Each Job | |
| 10 | 10 | M & L for Re-winding of exhaust fan 225 mm sweep any make / model size with super enameled copper winding wires of size 35/36 SWG or as per existing size of wire confirming to IS including varnishing the motor windings with good quality varnish complete all as specified and directed by Engineer-in-Charge. Make of winding wire: MILAN/ ATLAS/ CHETAK/ DEVIDAYAL | 20 | Each Job | |
| 11 | 11 | Ditto all as per serial item No. 10.00 here-in-before but of 300 mm sweep | 20 | Each Job | |
| 12 | 12 | Ditto all as per serial item No. 10.00 here-in-before but of 400 mm sweep | 8 | Each Job | |
| 13 | 13 | Supply and Fix in replacement of ball bearing suitable for exhaust fan of any sweep. Make :- NBC/SKF conforming to IS | 20 | Each | |
| 14 | 14 | Supply and fix in replacement of brass bush suitable for exhaust fan any make/model all as per original size/shape/type conforming to IS | 10 | Each | |
| 15 | 15 | Supply, fixing in replacement of shaft of exhaust fan any make / model all as per original size / shape/type conforming to IS. | 10 | Each | |
| 16 | 16 | Supply and fix in replacement of capacitor 230V,50Hz,4MFD for exhaust fan, all as specified & directed. Make:- Asian / Usha/ Universal | 30 | Each | |
| 17 | 17 | Supply and fix in replacement of capacitor 230V,50Hz,2.5MFD for exhaust fan, all as specified & directed. Make:- Asian / Usha/ Universal | 30 | Each Job | |
| 18 | 18 | Supply and fix in replacement down rod one foot long suitable for 1200/1400mm sweep of ceiling fan all as required at site complete all as specified and directed by Engineer-in-Charge | 40 | Each | |
| 19 | 19 | Supply and fixin in replacement 'D' clamp with nuts, check nuts, quarter pin and rubber reel suitable for 1200/1400mm sweep of ceiling fan all as required at site complete all as specified and directed by Engineer-in-Charge | 100 | Each | |
| 20 | 20 | Supply, fixing in replacement PVC Canopies (set of two) with steel screws as ordered or sample given by the Engineer-in-Charge | 100 | Each | |
| 21 | 21 | Supply, fixing in replacement of flexible wire of size 23/0.0076 stranded copper conductor complete all as specified and directed by Engineer-in-Charge. Make: 'PARAGON /FINOLEX/ INCAB/ HAVELLS/ PLAZA/ ANCHOR' | 200 | RM | |
| 22 | 22 | REPAIR TO WATER COOLERS / AC / REFRIGERATOR / DESERT COOLER | |||
| 23 | 23 | Dsimantling/ removing the defective unserviceble compressor of nay capacity for window type, split type, refrigerators, eater coolers, Deep freezers etc complete, all as directed by Engineer-in-charge. | 9 | Each | |
| 24 | 24 | Supply install test & commissioning new compressor of water cooler capacity 80/40 litres duly charged with fresh mafron gas etc, complete all as specified & directed by Engineer-in-charge. Make :- Voltas / Shriram / Tech Cum Shah / Kirloskar as per existing make at site. Note :- Gurantee card with purchase voucher of original manufacturer shall be produced before payment. | 1 | Each | |
| 25 | 25 | Ditto all as per Item No. 24.00 hereinbefore, but for 120/80litre capacity cooler | 1 | Each | |
| 26 | 26 | Ditto all as per Item No. 24.00 hereinbefore, but for 150/150litre capacity cooler | 1 | Each | |
| 27 | 27 | Ditto all as per Item No. 24.00 hereinbefore, but for split type AC 2 Ton capacity | 2 | Each | |
| 28 | 28 | Ditto all as per Item No. 24.00 hereinbefore, but for split type AC 1.5 Ton capacity | 2 | Each | |
| 29 | 29 | Ditto all as per Item No. 24.00 hereinbefore, but for refrigerator 310 litre capacity | 2 | Each | |
| 30 | 30 | M&L for detecting the gas leakage, rectfying the defects vacumizing and charging fresh Gas & commssioning and testing the window/ Split type Air conditioner unit 1.5/2 Ton capacity, complete, all as directed. | 4 | Each Job | |
| 31 | 31 | Dittto all as per Item No.30.00 hereinbefore, but of 310 litre capacity refrigerator | 1 | Each Job | |
| 32 | 32 | Dittto all as per Item No.30.00 hereinbefore, but of water cooler of any capacity | 3 | Each Job | |
| 33 | 33 | Taking down carefully existing internal wiring of exisiting water coolers and in lieu of provision of new internal wiring with PVC insulated copper conductor of size 40/0.0076sqmm including replacement of main lead 03 metre long, terminal clips, thimbles, 03pin plug top 15amps & soldering extra complete, all as specified & directed. Make of wire :- Plaza / Finolex / | 5 | Each Job | |
| 34 | 34 | Taking down carefully the following accessories/ parts from existing water coolers and in lieu providing new accessories / parts in theses water coolers as per details given hereinafter :- | |||
| 35 | 34.1 | (a) Filter copper | 4 | Each Job | |
| 36 | 34.2 | (b) Capillary Tube of copper existing size as per sample | 4 | Each Job | |
| 37 | 34.3 | (c) PVC water outlet pipe 15mm dia including clamps | 4 | Each Job | |
| 38 | 34.4 | (d) Drain pipe of same quality , length and dia as per existing | 4 | Each Job | |
| 39 | 34.5 | (e) S&F new condenser size 12''x12''/12''x15'' | 3 | Each | |
| 40 | 35 | Taking down defective fan motor from water coolers, dismantling the old burnt winding from the motor nad rewinding with super enamelled copper wire as per existing size Makee:- Milan / Chetak, including replacement of shaft, bushes mounting rubbers, nuts bolts nad refixing after reassembling and testing in existing bwater coolers for under mentioned fan motors ( Note :- The unit quoted rate shall be deemed to be included replacment of minor apres such as rubber, nuts washers insulating materials and clamps) | |||
| 41 | 35.1 | (a) Fan motor of capacity 1/16 HP 230Volts, Single Phase | 1 | Each | |
| 42 | 35.2 | (b) Fan motor of capacity 1/35 HP 230Volts, Single Phase | 2 | Each | |
| 43 | 35.3 | (c) Fan motor of capacity 1/10 HP 230Volts, Single Phase | 1 | Each | |
| 44 | 35.4 | (d) Fan blades made up of aluminium as per sample | 5 | Each | |
| 45 | 36 | Taking down carefully fan motor from existing water coolers and in lieu providing new fan motor 1/35 HP 230 Volts, 50 HZ including replacement of mounting legs complete all as specified & directed. Make of Fan motor :- Frac Master / Polor\n | 3 | Each | |
| 46 | 37 | Supply & Fix in repalcement push cock ( stainless steel) for water cooler as per sample | 4 | Each | |
| 47 | 38 | Supply & fixing thermostat for water cooler Make Indfoss | 3 | Each | |
| 48 | 39 | Supply & fixing relay with OLP suitable for water cooler Mkae Annapurna / Hi Tech | 2 | Each | |
| 49 | 40 | Supply & fixing running capcity 36MFD Make :- Tibcon / Sharda / Epcos | 4 | Each | |
| 50 | 41 | Supply & fixing capacitor 10 MFD Make :- Tibcon / Sharda / Epcos | 2 | Each | |
| 51 | 42 | Supply & fixing capacitor 15 MFD Make :- Tibcon / Sharda / Epcos | 2 | Each | |
| 52 | 43 | Supply & fixing capacitor 40/60 MFD Make :- Tibcon / Sharda / Epcos | 3 | Each | |
| 53 | 44 | Supply & Fix cable 3 core copper conductor size 40/0.0076 for water cooler Make of cable :- Plaza / Finolex / Kalinga | 60 | RM | |
| 54 | 45 | Removing of existing split type AC 1.5 / 2.0 ton capacity mounting, cleaning of evaporator and condenser with alkaline based solution, washing of AC , oiling of fan motor and refixing on mounting, including provision for making opening air tight and dust proof including testing and commissioning, complete, all as directed. | 6 | Each Job | |
| 55 | 46 | Supply & fix running capacitor 45 MFD Make :- Tibcon / Sharda / Epcos | 4 | Each | |
| 56 | 47 | Supply & fix capacitor 50 MFD Make :- Tibcon / Sharda / Epcos | 4 | Each | |
| 57 | 48 | Taking down carefully the following accessories / parts from exisiting refrigeration of nay make of capacity 310 litres supply & fixing accessories / parts as per existing in the same refrigeratiors as under :- | |||
| 58 | 48.1 | (a) Evaporator for 310litre refrigertors of any make | 1 | Each | |
| 59 | 48.2 | (b) Filter copper of nay make | 1 | Each | |
| 60 | 48.3 | (c) Capillary tubes of copper exisitng sizes as per sample | 1 | Each | |
| 61 | 48.4 | (d) Supply & Fix thermostat for refrigerator 310 litre capacity Make Indfoss | 1 | Each | |
| 62 | 48.5 | (e) Supply & Fix relay for refrigerator 310 litre capacity as per sample | 1 | Each | |
| 63 | 48.6 | (f) Vegetable tray for refrigerator of 310 litre capacity as per sample | 1 | Each | |
| 64 | 49 | Taking down carefully the follwing parts from the existing AC in lieu providing new accessories / parts as per existing as bunder:- | |||
| 65 | 49.1 | (a) Contactor for split AC | 4 | Each | |
| 66 | 49.2 | (b) PCB of AC split ( 1.5/ 2.0TR) | 1 | Each | |
| 67 | 49.3 | (c) Starting relay for AC | 4 | Each | |
| 68 | 50 | Removing of old paint complete with emery paper and cleaning with scrapper and preparation of internal surfaces & bottom of dessert coolers and applying one coat of bituminous paint, complete, all as specified & directed. | 30 | Each Job | |
| 69 | 51 | Ditto all as per item No. 50.00 hereinbefore but appying one coats of synthectic enamel paint to external surfaces of desert coolers including steel grills, side panel complete all as specified & directed. | 30 | Each Job | |
| 70 | 52 | Taking down carefully old unserviceable water pumps heavy duty of capacity 1/70HP, 230 Volts, 50 Hz single pole in lieu providing new submersible type water pump Make :- Indo | 60 | Each Job | |
| 71 | 53 | Taking down down carefully fan motor 1/6 to 1/8 HP 230 volts, 50Hz from existing desert coolers and in lieu providing new fan motor kit 1/6 to 1/8 HP 230volts 50 Hz including replacement of mounting legs complete all as specified & directed Make :- Khaitan / Crompton Greaves / Indo | 60 | Each | |
| 72 | 54 | Taking down carefully fan motor 1/6 to 1/8HP 230volts, 50Hz from exisiting desert coolers and refixing the same fan motor after rewinding with super enamelled copper wire of existing size complete including replacement of mounting legs complete all as specified & directed. | 10 | Each | |
| 73 | 55 | Suuply & Fix including taking down capacitor for desert cooler 4MFD 230volts Make:- Asian / Tibcon | 40 | Each | |
| 74 | 56 | Supply & Fix including taking down front grill including nuts & bolts and wsahers suitable for 18/20" sweep desert coolers Make Alka / Konark | 25 | Each | |
| 75 | 57 | Supply & Fix including taking down wood wool pad for desert coolers ( set of three ) | 65 | Each Set | |
| 76 | 58 | Supply & Fix including taking down supporting jali for desert coolers ( set of three ) | 65 | Each Set | |
| 77 | 59 | Supply & Fix including taking down plug Top 3 pin, 5-A, 230 volts | 45 | Each | |
| 78 | 60 | Supply & Fix including taking down fan blades mode of aluminium for desert cooler as per sample | 30 | Each | |
| 79 | 61 | Supply & fix including taking down PVC pipe 15mm fo desert cooler | 110 | RM | |
| 80 | 62 | Taking down unserviceable Geyser including bushes, washers, mounting rubbers, nuts, bolts and clamp from existing place and re-fixing at same place after repair, Geyser of Make :- Volts/ Bajaj / Godrej capacity 25/50 litres complete, all as specified & directed. | 30 | Each | |
| 81 | 63 | Supply & Fix Thermostat switch ISI marked to Geysers 25/50 litres | 25 | Each | |
| 82 | 64 | Supply & fix high density polythene pipe (HDPE) connection arrangement with pipe of pressure rating 2.5kgf/cm2, 15mm bore 30cm to 45cm long with brass unions one ( Chromium plated ) one on each side in reapir to Geysers 25 /50 litres Pipe shall be as per I.S. | 25 | Each | |
| 83 | 65 | S&F in replacement Plug and socket in sheet metal enclosure with 2 pin and earth plug and socket complete with and including MCB, SP, 20 Amps , 240 volts heavy duty all as specified.Make:-Legrand Cat Part 607851/ equivalent cat part No. in Hagger /L&T/ Standrad | 5 | Each | |
| 84 | 66 | S & F in replacement MCB suitable for 6 to 32 Amps, 240 Volt AC supply , SPN, with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge. Make:-Legrand / GE / Siemens /L&T/ Indo Asain / C&S / ABB / BCH | 15 | Each | |
| 85 | 67 | S & F in replacement heating element ISI Marked of rating 1.5 KW capacity including washers for 25 ltrs capacity Geysers all as specified.\nMake :- THETA/ ALERT | 5 | Each | |
| 86 | 68 | S & F in replacement heating element ISI Marked of rating 2 KW capacity including washers for 50 ltrs capacity Geysers all as specified.\nMake :- THETA/ ALERT | 18 | Each | |
| 87 | 69 | Supply and fixing in replacement Plug top, 3 pin, 15 Amps, 230 Volts, ISI marked, complete all as specified and as directed by Engineer-in-Charge. Make:- Anchor/MDS/Leader/ LEGRAND/HAVELLS | 30 | Each | |
| 88 | 70 | Supply and fixing in repair release valve suitable for 15 mm bore of pipe for 25/ 50 ltrs capacity Geysers, ISI marked all as specified.\nMake :- Jindal/Prakash/ UNIK/KS. | 10 | Each | |
| 89 | 71 | Supplied and fixed in repairs bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule suitable for 15mm bore GI pipe complete all as specified and as directed by Engineer-in-Charge.\nMake :- JAQUAR/PRAYAG/SIEKO/PARKO/ HINDWARE/MARC\n | 6 | Each | |
| 90 | 72 | Supply & Fix in replacement of ELCB capacity 63 Amps 100mA three phase having charastics IEC 61008-1 Im-1000A, LNC-10000A 4 pole having single nob for on off test switch, all as directed by Engineer-inCharge. Make - L&T model BGB 406310 / ABB ? Havells | 14 | Each |
Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
