Addition Alteration To Foyet , Meat Cutting Room And Catering Office Of No . 1 Officer Mess At Afs Hakimpet Under Ge ( Af ) Hakimpet
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Jun 2021
0 days left
EMD
28000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
HAKIMPET → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Addition Alteration To Foyet , Meat Cutting Room And Catering Office Of No . 1 Officer Mess At Afs Hakimpet Under Ge ( Af ) Hakimpet
BOQ
| NAME OF WORK : ADDN/ALTN TO FOYER, MEAT CUTTING ROOM AND CATERING OFFICE OF NO. 1 OFFICER MESS AT AFS HAKIMPET UNDER GE(AF) HAKIMPET | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition of cement concrete not exceeding 15 cm thickness in ground/1st floors including floor tile complete including removal of debries out of MOD land, complete all as specified and directed. | 15 | Cum | |
| 2 | 2 | Demolition or dismantling of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and pre cast concrete articles, , complete all as specified and directed. | 10 | Cum | |
| 3 | 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and remove the debris out of MOD land, complete all as directed. | 45 | Sqm | |
| 4 | 4 | Dismantling stone slabs and tiles of any description or thickness in floors, complete all as specified and directed. | 1 | X Sqm | |
| 5 | 5 | Dismantling of choukhats with shutter not exceeding 8 Sqm, complete all as specified and directed. | 4 | Each | |
| 6 | 6 | Demolition of RCC of any description and in any position (Reinforcement cut as required to facilitate demolition) and remove the debris to out of MOD land, complete all as specified and directed. | 7 | Cum | |
| 7 | 7 | Cutting openings or grooves through stone walls for door, windows & other openings or enlarging existing openings, etc. or cutting uot defective masonry for underpinning including providing, fixing & removing, shoring, cleaning & stacking bricks & removing surplus to store & rubbish out of MOD land, complete all as specified and directed. | 5 | Cum | |
| 8 | 8 | Surface excavation not exceeding 30cm deep & averaging 15cm deep & getting out any type of soil, complete all as specified and directed. | 150 | Sqm | |
| 9 | 9 | Excavating in trenches, not exceeding 1.5m wide & not exceeding 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc.not exceeding10 sqm on plan & not exceeding 1.5 m in depth & getting out, complete all as specified and directed. | 20 | Cum | |
| 10 | 10 | M&L for Plain Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate in foundations, filling and mass concrete, complete as specified and directed. | 4 | Cum | |
| 11 | 11 | M&L for RCC 1:1.5:3 nominal mix concrete using 20mm stone aggregate in slabs supporting on walls, beams and columns in floors, roofs, landings, and the like, complete as specified and directed. | 20 | Cum | |
| 12 | 12 | M&L or RCC (Nominal mix) in 1:2:4 type B1 (using 20mm graded aggregate) in lintels over 1.5 mtr span, complete as specified and directed. | 1 | Cum | |
| 13 | 13 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in modular bricks in cement mortar 1:6, complete as specified and directed. | 15 | Cum | |
| 14 | 14 | M&L for formwork to rough finished flat surfaces of concrete foundations, footings , coulmns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams ; and other similar works; vertical or to batter, complete all as specified and directed. | 150 | Sqm | |
| 15 | 15 | M&L for formwork to soffits of suspended slabs such as roof slabs,floor slabs landings and similar works (not exceeding 200mm thick), complete all as specified and directed. | 90 | Sqm | |
| 16 | 16 | Formwork to edges of concrete flats, treads, , breaks in floors, window cills, concrete railings, openings in concrete walls, floors & roofs n exc 20cm wide & & sides of RCC/PCC bands in walls, horizontal or sloping, & similar work exc 10cm but exceeding 20cm wide, complete as specified and directed. | 40 | RM | |
| 17 | 17 | S&F Mild steel TMT bars 10 mm dia and over., cut to length, bent to shape requiredincl crencking bendding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete as specified and directed. | 1700 | Kg | |
| 18 | 18 | S&F Mild steel TMT bars 6 mm to 8mm dia and ., cut to length, bent to shape requiredincl crencking bendding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. | 300 | Kg | |
| 19 | 19 | S&F Mild steel TMT bars 5mm dia and over up to and including 10mm dia in styrrups and cut to length, bent to shape requiredincl crencking bendding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and directed. | 400 | Kg | |
| 20 | 20 | M&L Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces with approved water proofing compound (water proofing compound measured and paid separately) finished even and smooth without using extra cement, complete as specified and directed. | 200 | Sqm | |
| 21 | 21 | Supply only integralwater proofing compound. | 30 | Kg | |
| 22 | 22 | Providing and fixing precast cement concrete louvres and jallies type B0 1:2:4 (12.5 mm graded aggregate, 35mm thick (measured solid), including all mouldings and frame set in cement mortar 1:4, complete all as specified and directed. | 20 | Sqm | |
| 23 | 23 | M & L for Preparing newly plastered surfaces of wall and applying two coats of acrylic base exterior grade (100% Acrylic) over a coat of primer, complete all as specified and directed. | 150 | Sqm | |
| 24 | 24 | M&L for applying putty on the ceiling surfaces and two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces of ceilings, complete as specified and directed. | 100 | Sqm | |
| 25 | 25 | M&L for preparation of new plastered surfaces and applying two coats oil bound distemper over a coat of alkaline resistent primer over and including a thin coat of putty /POP to the existing surface, complete all as specified and directed | 50 | Sqm | |
| 26 | 26 | M&L for preparation of old plastered surfaces by complete removal of existing treatment and applying two coats oil bound distemper over a coat of alkaline resistent primer, complete all as specified and directed | 1000 | Sqm | |
| 27 | 27 | M&L for Granite 20mm thick (of any type any colour) work (table rubbed and polished) in floors, steps, jambs, pillars, window- cills, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including chamfering of edge in steps, complete as specified and directed. Note: Screed bed shall be measured and paid for separately. | 45 | Sqm | |
| 28 | 28 | M&L for for coloured glazed ceramic tiles of sizes 300m x 450 mm X 7 mm thick jointed in neat cement slurry, laid over including 10 mm thick screed bed/backing layer in CM (1:4) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado/skirting, complete all as specified and direcetd.\n | 20 | Sqm | |
| 29 | 29 | M&L for for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and direcetd.\n | 10 | Sqm | |
| 30 | 30 | M&L for Vitrified ceramic tiles10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match, complete as specified and directed. | 60 | Sqm | |
| 31 | 31 | M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes, complete as specified and directed. | 115 | Sqm | |
| 32 | 32 | S&F anodised aluminium powder coating (minium thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specifed and directed. | 150 | kg | |
| 33 | 33 | S&F anodised aluminium Powder coating double door shutters top hung sliding alongwith fixed type portion both side and top of shutters aluminium section weighing 0.55Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws and locking system etc, complete all as specified and directed. | 15 | Sqm | |
| 34 | 34 | M&L hard core of gauge n exc 63mm of stone aggregate deposited spread and levelled in layers n exc 15 cm thick water and rammed to a true surface, complete as specified and directed. | 15 | Cum | |
| 35 | 35 | M&L100mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base under floor. | 150 | Sqm | |
| 36 | 36 | M&L for 25mm thick sand cushion in flooring below interlocking tiles complete all as specified and directed. | 0.5 | Cum | |
| 37 | 37 | M&L for Machine pressed precast concrete inter locking paver block glossy type any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with gray cement and pigment set and jointed with cement slurry with pigment to match with PCC 1:3:6 ytpe C-1 (Using 20 mm graded aggregate) including coping to joint with kerb complete all as specified. | 170 | Sqm | |
| 38 | 38 | Supply and fix in repairs PVC soil, waste and rain water (SWR) drainage pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall as rain water pipe with suitable size PVC stack clamps by maintaining 30mm clear gap between finished wall surface and pipe, complete all as specified and directed. | 25 | RM | |
| 39 | 39 | S&F PVC (SWR) bends 110mm bore fix in any type of connection, complete all as specified and directed. | 10 | Each | |
| 40 | 40 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard /dence soil, complete all as specified and directed. | 8 | Cum | |
| 41 | 41 | Removing excavated material out of MOD land and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed. | 33 | Cum | |
| 42 | 42 | M&L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn thorough and including non metalic, medium grade rigid PVC conduit with all conduit accessories (including concealing and finising to match with the sorroundings) and including provision of 1.5 Sqmm PVC indulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made out MS sheet suitable for Modular switches concealed in walls with front cover & base frame, screws, suitable for housing modular switches, socket outlets, fan regulators etc, complete all as specified and directed. | 4 | Point | |
| 43 | 43 | All as per Sl item No.42 here-in-before but for 15 Amps socket outlet by using 2.5 Sqmm PVC insulated unsheathed copper conduit multi stranded on independent board including provn of 1.5 Sqmm PVC insulated solid copper conductor continous on earth wire, complete all as specified and directed. | 1 | Point | |
| 44 | 44 | S&F Ceiling rose surface type bakelite of size 65 x 50 mm, 2 to 3 terminals for tube light bulk head fittings and wall mounting fitting all as specified and directed. | 4 | Each | |
| 45 | 45 | Supply and fix Switch flush type 5 Amps single pole, one way on laminated sheet, complete all as specified and directed. | 4 | Each | |
| 46 | 46 | Supply and fix Switch flush type 15 Amps single pole, one way on laminated sheet, complete all as specified and directed. | 1 | Each | |
| 47 | 47 | S&F socket outlet multipurpose 6 Pin, 15 Amps, Piano flush type on laminated sheet etc, complete all as specified and directed. | 1 | Each | |
| 48 | 48 | S&F LED light fitting 20 watt including LED rod, wall mounted LED batten with polycarbonate housing & intregrated electronic driver, complete all as specified and directed. \nMake: Havells Cat Part No. LUMILINESBS20865SPCWH or equivalent in Bajaj/Philips | 3 | Each | |
| 49 | 49 | Supply and Fix LED street light fitting, 40W with driver inside a pressure die cast aluminium housing with toughened glass cover, IP 66 degree of protection including suitable size clamps with nut & bolts for fixing on pole/bldg complete all as specified and directed. pressure dia-cast aluminim complete fixing arrangement complete all as specified and directed, \nMake : Havells Cat No. ENDURAPEARLNEOSL40WLED757PASYTOPC OR Equivalent in Bajaj/Philips | 1 | Each |
AI Tender Summary
Tender Timeline
Jun 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 14, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 16, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender