Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-06-2021 | Corrigendum 8 regarding revised BOQ | Financial Bid | 14-06-2021 |
| 2 | 03-06-2021 | Online Prebid meeting link | Other | 14-06-2021 |
| Name of Work: Balance work for Phase 1A (a)-Part A at IIT Indore | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth Work | |||
| 2 | 1.01 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.\nAll kinds of soil | 843 | Cum | |
| 3 | 1.02 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.\n2.8.1 All kinds of soil. | 13 | Cum | |
| 4 | 1.03 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 809 | Cum | |
| 5 | 1.04 | Clearing of site by removal of debris,malba,grass, Cleaning bushes including prooting of rank vegetation, green bush wood, trees and saplings of girth upto 30cms measured at a height of 1m above ground), including disposal of unserviceable material at an un objectionable place, stacking of serviceable material as per nstruction taking all necessary precautions for safety of existing structures, service lines etc.All necessary tools, tackles and safety barricades shall be arranged by the ontractor. | 1112 | Sqm | |
| 6 | 1.05 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | 806 | Cum | |
| 7 | 1.06 | Disposal of moorum, building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 56 | Cum | |
| 8 | 2 | Concrete work | |||
| 9 | 2.01 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) | 303 | Cum | |
| 10 | 2.02 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :. 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate \n20 mm nominal size) (M-15) | 32 | Cum | |
| 11 | 2.03 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. | 479 | Sqm | |
| 12 | 2.04 | Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | 16 | Cum | |
| 13 | 3 | RCC Work | |||
| 14 | 3.01 | REINFORCED CEMENT CONCRETE IN SUPER STRUCTURE WORKS Providing and laying RCC (reinforced cement concrete) of grade M-25 with 20 mm and down grade crushed stone aggregate in all types of super-structures like slab,columns, beams (except building superstructure which are not covered elsewhere), pedestals, pipe supports, RCC retaining wall, boundary wall including construction joints, shuttering, supplying & fixing MS inserts/bolts,conduits,precast covers, finishes etc. at all heights and levels complete as per drawings , specifications and directions of the Engineer-in-charge. Note: 1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade cement, coarse sand and coarse aggregates, other minor construction materials, shuttering, staging, shoring/strutting, finishing, supplying & fixing MS inserts/bolts, testing etc. all bye works and sundry works. | 6 | Cum | |
| 15 | 3.02 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | 38 | Cum | |
| 16 | 3.03 | \n Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete | 42 | Sqm | |
| 17 | 3.04 | \n Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform | 189 | Sqm | |
| 18 | 3.05 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers | 208 | Sqm | |
| 19 | 3.06 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more | 4080 | Kg | |
| 20 | 3.07 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | 15 | Cum | |
| 21 | 3.08 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and huttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and offits. | 12 | Sqm | |
| 22 | 3.09 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). | 672 | Sqm | |
| 23 | 3.1 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. | 188 | Meter | |
| 24 | 3.11 | Providing and filling in position, blown bitumen in expansion joints. | 1 | Cum | |
| 25 | 3.12 | Providing and laying 40 mm thick 150 mm deep expansion/seperation joint along the periphery of pump foundations, pedestals, flooring with approved bituminous impregnated fibre board conforming to IS 1838 including sealing the top 20mm depth with bituminous mastic sealant at all heights and locations with all bye-works complete as per drawing, standard practice as directed by engineer. | 342 | Mts | |
| 26 | 3.13 | Providing and filling in position High performance, elastomeric, pouring grade polysulphide sealant in cracks of 25 to 40 mm including cleaning of expansion joints by subsequent removal and cleaning of the same. existing material in expension joint | 344 | MTs | |
| 27 | 3.14 | Providing and fixing sheet covering over expansion joints with iron screws as per design.Aluminium fluted strips 3.15 mm thick. 150 mm wide | 344 | MTs | |
| 28 | 4 | Masonry Work | |||
| 29 | 4.01 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) | 122 | Cum | |
| 30 | 4.02 | BRICK WORK IN SUPER STRUCTURE Providing and construction and handing over brick masonry work with brick class designation M-7.5 of IS:1077 in Cement Mortar 1:4 (1cement : 4 coarse sand) in superstructure plastering of 15 mm thickness in CM 1:4 on both the faces complete in all respects as per scope of work, detailed construction drawings , technical specifications and direction of Engineer-in-charge Note:. 1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade cement, 2nd class bricks (strength not less than M5), other minor construction materials, shuttering, staging, shoring/strutting, finishing, etc. with all bye works and sundry works. 2. Only net brick masonry volume as per drawing are measurable for payment purpose. | 14 | Cum | |
| 31 | 4.03 | AAC BLOCKS Providing and laying autoclaved aerated cement blocks masonry with AAC block in uperstructure above plinth level upto V level in cement mortar 1:4(1cement:4coarsesand).The rate includes providing and placing in position 2 NOS 6 mm dia M.S bars at every third course of masonry works | 99 | Cum | |
| 32 | 4.04 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) | 70 | Cum | |
| 33 | 4.05 | Providing and laying autoclaved aerated cement blocks masonry with 150 mm / 230 mm / 300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). | 153 | Cum | |
| 34 | 5 | Marble granite | |||
| 35 | 5.01 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. | 93 | Sqm | |
| 36 | 5.02 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade - Area of slab upto 0.50 sqm \n | 832 | sqm | |
| 37 | 5.03 | Extra for providing edge moulding to 18 mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer- In-Charge. | 18 | Mt | |
| 38 | 5.04 | Extra for providing opening of required size & shape for wash basins / kitchen sink in kitchen platform, vanity counters and similar location in marble / Granite / stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. | 15 | Nos. | |
| 39 | 5.05 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 98 | sqm | |
| 40 | 6 | Wood work | |||
| 41 | 6.01 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 60 | Sqm | |
| 42 | 6.02 | Extra for providing lipping with 2nd class teak wood battens 25 mm | 60 | Sqm | |
| 43 | 6.03 | Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square | 54 | Sqm | |
| 44 | 6.04 | Extra for cutting rebate in flush door shutters (Total area of the shutters to be measured). | 48 | Nos. | |
| 45 | 6.05 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron ) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. (10 mm X 160 mm) | 240 | Kg | |
| 46 | 6.06 | Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacture r's specification and direction of Engineer-in-charge. | 262 | Mt | |
| 47 | 6.07 | Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge. | 91 | Sqm | |
| 48 | 6.08 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.5 mm thick | 60 | Sqm | |
| 49 | 6.09 | Supply and Fixing Dead lock package of approved make with 55mm backset, 20mm square forend prepared for euro profile cylinder(EPC) including strike plate and EPC 60mm Length internal thumb turn & external key operation with escutcheons in stainless steel satin finish (304 SS grade) | 5 | Nos. | |
| 50 | 6.1 | Supply and Fixing Sashlock package of Dorma or equivelent pure 8100 Type-2 or approved eqvivalent make with a pair of Lever Handle on Roses & escutcheons including 271a Sash lock with 72mm centre to centre, 55mm Backset 20mm Square forend. | 20 | Nos. | |
| 51 | 6.11 | Supply and Fixing H -Type Pull Handle of Dorma or equivlent TGDI-H 350 or approved equivalent make. Length =350mm, 32mm dia, SS304. | 6 | Nos. | |
| 52 | 6.12 | Supply and Fixing External trim with design lever handle of Dorma PHT 05 or approved equivalent make suiting the panic bar for fire and smoke check doors. For max. 60mm thick door prepared for half euro profile cylinder. Silver finish | 13 | Nos. | |
| 53 | 6.13 | Supply and Fixing Rack and pinion non-handed door closer of Dorma or equivelent TS 72 EN size 2- 4, with standard arm and with two independent closing valves and latching speed adjustable by arm, conforming to EN 1154. All adjustment screws face fixed . The door closer shall be with Silver finish cover .The door closer shall conform to EN 1154 standard. | 11 | Nos. | |
| 54 | 6.14 | Supply and Fixing Stainless steel tower bolt with satin finish of approved make and quality with necessary stainless steel screws as per direction of Engineer-In-Charge ii) 250 x 10 mm | 13 | Nos. | |
| 55 | 6.15 | Supply and Fixing 5 knuckle, 2 bearing butt hinges of size 100x75x3mm of DORMA make or approved equivalent make in SS 304. Tested to EN1935. Max. Weight upto 120 Kgs. | 78 | Nos. | |
| 56 | 6.16 | Providing and fixing specified wood frame work consisting of battens 50x100 mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. (Kiln seasoned and chemically treated hollock wood.) | 4 | Cum | |
| 57 | 6.17 | Providing and fixing 18mm thick Waterproof ply, plain lining with necessary screws/nuts & bolts/nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-in-charge. (Frame work shall be paid for separately) | 190 | Sqm | |
| 58 | 6.18 | Providing and fixing 19 mm commercial ply board fixed to M.S. tubular section frame with necessary fixing arrangement like screws etc. complete with teak wood lipping on sides of ply board, antitermite proof paint on ply board, filling at section sealant between floor and ply board skirting joint etc. complete as per drawing. | 193 | Sqm | |
| 59 | 6.19 | Providing and fixing of maple wood planks of approximate size of 320 mm X 20 mm thick over 19 mm commercial ply with necessary fixing arrangement , melamine polishing, wood preservative pain on the unexposed sides of wood plank etc complete as per drawing. | 193 | Sqm | |
| 60 | 6.2 | Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately). | 222 | Mts | |
| 61 | 6.21 | Providing, supplying and fixing internal metal fire rated doors (double/ single leaf) of approved equivalent make with Fire Resistant 120 minutes rating as per manufacturers specifications and similar to the prototype tested by CBRI, Roorkee & certificate issued thereof (as per IS:3614 Part-2, 1992) with overall size as per site requirement. Door frames are made with 1.6mm thick galvanised steel sheet pressed to double rebate profile of size 143x57mm. Door shutters are made with 1.2mm thick galvanised steel sheet pressed formed to provide fully flush double skin panel shall be not less than 46mm thick with lock seam joints at style edges. The internal construction of panel shall be filled with insulating mineral wool with reinforcement at top, bottom and stile surrounds.The door shutters shall be provided with provision for vision panel of required size(as per Architectural drawings) with 6 mm thick clear toughened Boro Silicate glass of Pyran or Scot make to give120 minutes fire rating.The vision panel glass shall be paid for separately. The item also include provision for required iron mongery, shutter and frame shall be finished with zinc phosphate a) For single leaf door. | 148 | Sqm | |
| 62 | 6.22 | Providing, supplying and fixing internal metal fire rated doors (double/ single leaf) of approved equivalent make with Fire Resistant 120 minutes rating as per manufacturers specifications and similar to the prototype tested by CBRI, Roorkee & certificate issued thereof (as per IS:3614 Part-2, 1992) with overall size as per site requirement. Door frames are made with 1.6mm thick galvanised steel sheet pressed to double rebate profile of size 143x57mm. Door shutters are made with 1.2mm thick galvanised steel sheet pressed formed to provide fully flush double skin panel shall be not less than 46mm thick with lock seam joints at style edges. The internal construction of panel shall be filled with insulating mineral wool with reinforcement at top, bottom and stile surrounds.The door shutters shall be provided with provision for vision panel of required size(as per Architectural drawings) with 6 mm thick clear toughened Boro Silicate glass of Pyran or Scot make to give120 minutes fire rating.The vision panel glass shall be paid for separately. The item also include provision for required iron mongery, shutter and frame shall be finished with zinc phosphate a) For double leaf door. | 200 | Sqm | |
| 63 | 6.23 | Extra for providing 10mmx4mm extruded and self adhesive EPDM / cellular rubber sealing strip etc. for the fire doors wherever required etc. complete as directed by Engineer-In-Charge. The area of door shutter shall be measured for payment. A) For single leaf door. | 21 | Sqm | |
| 64 | 6.24 | Extra for providing 10mmx4mm extruded and self adhesive EPDM / cellular rubber sealing strip etc. for the fire doors wherever required etc. complete as directed by Engineer-In-Charge. The area of door shutter shall be measured for payment. A) For double leaf door. | 76 | Sqm | |
| 65 | 6.25 | Providing and Fixing SS Tubular lever handle of Dorma pure 8100 Type-2 or approved eqvivalent make. Back to back fixing arrangement | 7 | Nos. | |
| 66 | 6.26 | Providing and Fixing Door Seal in all respect as per direction of engineer in charge | 22 | Nos. | |
| 67 | 6.27 | Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). | 111 | sqm | |
| 68 | 7 | Providing and fixing glazing in fire resistant door hutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not ess than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant rimer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 60 minutes of fire resistance both integrity & radiation control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100 mm x2200 mm (w x h) or 2.42 sqm. | 15 | sqm | |
| 69 | 7.01 | Metal door with complete fitting and fixture for double door | 125 | sqm | |
| 70 | 7.02 | Metal door complete with all fitting and fixture service for single door | 126 | sqm | |
| 71 | 8 | Supplying and Fixing Metal door lock with Handle (Doorma or equivlent) | 62 | sqm | |
| 72 | 9 | Supplying and Fixing Metal door Handle (Doorma or equivlent) | 83 | Nos. | |
| 73 | 10 | Supplying and Fixing Toilet door Handle (Doorma or equivlent) | 4 | Nos. | |
| 74 | 11 | Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete External trim with design lever handle of Dorma PHT 05 or approved equivalent make suiting the panic bar for fire and smoke check doors. For max. 60mm thick door prepared for half euro profile cylinder. Silver finish. | 35 | Nos. | |
| 75 | 12 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete/ Rack and pinion non-handed door closer of Dorma TS 72 EN size 2- 4, with standard arm and with two independent closing valves and latching speed adjustable by arm, conforming to EN 1154. All adjustment screws face fixed. The door closer shall be with Silver finish. | 94 | Nos. | |
| 76 | 13 | Providing and Fixing Concealed tower bolt fire rated steel door (Doorma or equivalent) complete in all respect as per directions engineer in charge | 10 | Nos. | |
| 77 | 14 | PROVIDING AND FIXING OF DOORS AND WINDOWS Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Fire door with glass visin glass of 300 mm X 600 mm Fire Door | 115 | Sqm | |
| 78 | 15 | Steel work | |||
| 79 | 15.01 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 1640 | Kg | |
| 80 | 15.02 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Hot finished welded type tubes | 6000 | kg | |
| 81 | 15.03 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved Zinc chromate yellow steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes. | 1352 | Kg | |
| 82 | 15.04 | Steel work welded in built up sections/ framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete | 4733 | kg | |
| 83 | 15.05 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 10359 | Kg | |
| 84 | 15.06 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube | 6600 | Kg | |
| 85 | 15.07 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover | 84 | Sqm | |
| 86 | 15.08 | Providing and fixing ball bearing for rolling shutters. | 36 | Nos. | |
| 87 | 15.09 | Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 16.80 sqm in area | 84 | Sqm | |
| 88 | 15.1 | Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured). | 84 | Sqm | |
| 89 | 16 | Flooring work | |||
| 90 | 16.01 | FLOORING Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry,but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate | 20 | Sqm | |
| 91 | 16.02 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. | 1442 | sqm | |
| 92 | 16.03 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick | 117 | sqm | |
| 93 | 16.04 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. | 1520 | Mt | |
| 94 | 16.05 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick | 4798 | sqm | |
| 95 | 16.06 | 25 mm thick Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | 1669 | Sqm | |
| 96 | 16.07 | Extra over for Kaddappa Stone used in place of Kota stone | 1532 | Sqm | |
| 97 | 16.08 | Finishing and polishing of existing Kota stone flooring complete in all respect as per direction of engineer in charge | 1044 | Sqm | |
| 98 | 16.09 | With Rough finished kota stone 25 mm thick laid over 20 mm (average) thickness base and jointed with grey cement slurry excluding rubbing and polishing. | 884 | Sqm | |
| 99 | 16.1 | Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre. | 113 | Sqm | |
| 100 | 16.11 | Extra for kota stone flooring in treads of steps and risers using single length up to 2.00 metre | 623 | Sqm | |
| 101 | 16.12 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. Granite flooring | 41 | Sqm | |
| 102 | 16.13 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. | 168 | Sqm | |
| 103 | 16.14 | Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of Engineer-in-charge. | 1609 | sqm | |
| 104 | 16.15 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete | 1899 | sqm | |
| 105 | 16.16 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).600 mm X 600 mm | 1509 | sqm | |
| 106 | 16.17 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge Size of Tile 600 mm x 600 mm | 1312 | Sqm | |
| 107 | 16.18 | 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. Red sand stone | 361 | Sqm | |
| 108 | 16.19 | Providing and laying Ceramic floor tiles (1st quality, group v ) 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 (as per catagorory - B2) of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. | 276 | Sqm | |
| 109 | 16.2 | Providing and laying Antiskid Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make in all colours and shade in skirting, riser of steps, over 12 mm thick bed of cement morter 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 mm x 600 mm | 44 | Sqm | |
| 110 | 16.21 | Providing and fixing Glass mossaic tiles at finished plain wall/Floor surface of size 20mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge. | 1490 | Sqm | |
| 111 | 16.22 | Providing and laying Engineered wooden flooring of approved make and as per approved sample, colour and laid on the existing leveled flooring with approved adhesive & underlay including skirting & profile etc. complete as per manufacturers specification & approval of Architect. | 193 | Sqm | |
| 112 | 16.23 | Supply & Installation of Sports floor of approved make min 25 mm thickas of per approved sample, colour and laid on the existing leveled flooring with approved adhesive & underlay including skirting & profile etc. complete as per manufacturers specification & approval of Engineer-in-Charge. | 1211 | Sqm | |
| 113 | 17 | Roofing and Ceiling | |||
| 114 | 17.01 | Providing and fixing 400 mm wide 350 mm depth overall rectangular plain G.S. sheet (minimum 24 gauge) gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete 0.80mm thick with zinc coating not less than 275gm/m² & joint to be filled with silicon sealant. | 10 | Meter | |
| 115 | 17.02 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash astener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 5x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : A 12.5 mm thick tapered edge gypsum moisture resistant board | 119 | Sqm | |
| 116 | 17.03 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.52.1 GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns | 2803 | Sqm | |
| 117 | 17.04 | GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5mm thick with 8mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. | 238 | Sqm | |
| 118 | 17.05 | Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, A 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process.\n\n | 1068 | Sqm | |
| 119 | 18 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. | |||
| 120 | 18.01 | 75 mm diametre | 39 | Mt | |
| 121 | 18.02 | 110 mm diametre | 39 | Mt | |
| 122 | 18.03 | 160 mm diametre | 60 | Mt | |
| 123 | 18.04 | 200 mm Diametre | 344 | Mt | |
| 124 | 19 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase | 381 | Mts | |
| 125 | 20 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. | 26 | Nos. | |
| 126 | 21 | Finishing work | |||
| 127 | 21.01 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. | 1740 | sqm | |
| 128 | 21.02 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) | 304 | sqm | |
| 129 | 21.03 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) | 1356 | sqm | |
| 130 | 21.04 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) | 2670 | sqm | |
| 131 | 21.05 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers | 110 | per bag | |
| 132 | 21.06 | b) Providing and laying 12 mm thick cement plaster on walls, RCC beams, columns and chajja etc of mix 1:4 ( I cement, 4 fine sand) including making of typical grooves drip-course including hacking of RCC roof beams and columns surfaces and curing etc. The job includes the cost of supplying and fixing of chicken wire mesh at every joint of brick masonry and RCC before commencing the plastering work complete in all respect as per scope of work, detailed construction drawings , technical specifications and directions of the Engineer-in-charge. | 248 | Sqm | |
| 133 | 21.07 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture : | 4432 | sqm | |
| 134 | 21.08 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 13.43.1 Water thinnable cement primer | 6662 | sqm | |
| 135 | 21.09 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | 1537 | sqm | |
| 136 | 21.1 | Finishing walls with textured exterior paint of required shade : 1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm | 3041 | sqm | |
| 137 | 21.11 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. | 50008 | sqm | |
| 138 | 21.12 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) | 3309 | Sqm | |
| 139 | 21.13 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 50095 | sqm | |
| 140 | 21.14 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade . Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. | 166 | Sqm | |
| 141 | 21.15 | Providing and fixing of CHICKEN WIRE MESH 200 mm wide for repairing of plaster at joints of concrete and masonry | 608 | Sqm | |
| 142 | 21.16 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats | 5467 | sqm | |
| 143 | 21.17 | White washing with Dehradun/Rajasthan lime in 3 or more coats to give an even finish including the cost of adding required adhesive (DDL), blue pigment (Robin Blue) etc. on walls, ceiling etc. complete in all respects as per scope of work, detailed construction drawings , technical specifications and directions of the Engineer-in-charge. | 712 | sqm | |
| 144 | 21.18 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete surface smooth including necessary repairs to scratches etc. complete White washing with lime to give an even shade : Old work (two or more coats) | 5467 | sqm | |
| 145 | 21.19 | Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. | 9290 | sqm | |
| 146 | 21.2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. | 44184 | Sqm | |
| 147 | 21.21 | Finishing walls with textured exterior paint of required shade : Old work (One or more coats) applied @ 1.82 ltr/10 sqm. | 51958 | Sqm | |
| 148 | 21.22 | White washing with lime to give an even shade : New work (three or more coats) | 1063 | SQm | |
| 149 | 21.23 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification Two or more coats on new work | 4073 | Sqm | |
| 150 | 21.24 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. | 820 | Sqm | |
| 151 | 21.25 | Acid Washing and cleaning for existing floor complete in all respect as per direction of Engineer In Charge | 767 | Sqm | |
| 152 | 22 | Repairing work | |||
| 153 | 22.01 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. | 361 | sqm | |
| 154 | 22.02 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) | 2021 | Sqm | |
| 155 | 22.03 | Plaster in CM 1:4 a) Providing and laying 19 mm thick cement plaster on walls, RCC beams, columns etc of mix 1:4 ( I cement, 4 fine sand) including making of typical grooves drip-course etc including hacking of RCC roof beams and columns surfaces and curing etc. complete. The job includes the cost of supplying and fixing of chicken wire mesh at every joint of brick masonry and RCC before commencing the plastering work complete in all respect as per scope of work, detailed construction drawings, technical specifications and directions of the Engineer-in-charge. | 112 | Sqm | |
| 156 | 22.04 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 60 | Cum | |
| 157 | 22.05 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar | 11 | Cum | |
| 158 | 22.06 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | 2 | Cum | |
| 159 | 23 | Road work | |||
| 160 | 23.01 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. | 550 | Sqm | |
| 161 | 23.02 | Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineerin- charge. | 55 | Cum | |
| 162 | 23.03 | Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded tone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of ngineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).\nNote:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. Cement concrete prepared with batch mixing machine | 74 | Cum | |
| 163 | 23.04 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | 1405 | sqm | |
| 164 | 23.05 | Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).(for internal & external both) | 759 | Cum | |
| 165 | 23.06 | Supplying and consolidation at site Moorum all complete as per the direction of Engineer-in-charge. | 160 | Cum | |
| 166 | 23.07 | Laying water bound macadam sub-base with brick aggregate and binding material, earth etc. including screening, sorting and spreading to template and consolidation with light power road-roller etc.complete. (payment for brick aggregate and moorum etc. to be made separately) Over burnt (Jhama) brick aggregate 120 mm to 40 mm | 9 | SQM | |
| 167 | 24 | Sanitary work | |||
| 168 | 24.01 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 100 mm outlet 1 Sand cast iron S&S as per IS: 3989 each 1512.55 | 65 | Nos. | |
| 169 | 24.02 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | 36 | Nos. | |
| 170 | 24.03 | Providing and laying non pressure NP2 class LIGHT DUTY RCC Pipes with collars jointed with stiff mixture of cement mortar in the porportion of 1:2 (1 cement: 2 sand ) including testing of joint etc complete : 250 mm diametre RCC pipe | 5 | mtr | |
| 171 | 24.04 | Providing and fixing of bottle trap including 32 mm west pipe (Hindware \"NEO\" Cat No: 10098 & Bottle Trap: Jaquar \"ALD” CHR-769B)) Size 550 mm x 400 mm Each | 40 | Nos. | |
| 172 | 24.05 | Providing and fixing ABS Chrome plated Hand Shower (Health Faucet) with 8 mm dia, 1 Meter long Flexible tube & wall hook including cutting and making good the walls wherever required complete as per instructions of the engineer-in-charge (Make: Jaquar Cat No: ALD-577) or equivalent | 60 | Nos. | |
| 173 | 24.06 | Providing & fixing CP auto Pillar cock lift type with CP wall flange complete as per directions of the engineer-incharge (Make: JAQUAR Cat no.FLR 5005B).or equivalent | 64 | Nos. | |
| 174 | 24.07 | Providing and fixing automatic sensor faucet for cold water, for wash basin complete in all respect including basin mounted auto tap, with infrared sensors with solenoid valves for cold water with electronic circuit and necessary accessories including cutting and making good the walls and floors as per requirement and as per approved manufacturer’s make or equivalent (Make: Jaquar SNR-CHR-51011).or equivalent | 4 | Nos. | |
| 175 | 24.08 | Providing & fixing white vitreous china extended wall hung type European type water closet with C.P. bolts, nuts, C.I. chair or other hanging arrangement, without cistern with white solid plastic seat and cover with lid, C.P. brass hinge rubber buffers, with accessories,C.I/M.S. brackets painted with two coats of enamel paint of approved shade over a coat of primer. C.P. brass screws and wooden cleats, including cutting and making good the wall and floors wherever required (Make: Parryware Cat No: C0265 with Seat cover Cat No:C8112 Cardiff) .or equivalent | 32 | Nos. | |
| 176 | 24.09 | Providing and Fixing Concealed in wall Flushing Cistern with dual flush Actuator Plate (plastic body in approved finish), flush-stop function, noise less float valve and fast filling action with all component parts of high quality complete including fixing frame and set (Make: Parryware Cat No: C8174 & C813725) or equivlent | 21 | Nos. | |
| 177 | 24.1 | Providing and Fixing white vitreous china Oval wash basin size 430x420 mm for under counter mounting, specially fabricated brackets painted white, 32mm C.P.cast brass bottle trap and connection pipe to wall with C.P. wall flange and rubber adopter for waste connection complete, including cutting and making good the walls wherever required:(Parryware Cat No:C8478 & Bottle Trap: Jaquar \"ALD” CHR-769B)) or equivalent | 35 | Nos. | |
| 178 | 24.11 | Providing and fixing manual CP soap dispenser with liquid soap (including one time soap fill) including cutting and making good the walls, wherever required complete as per instructions of the engineer-in-charge (Make: Jaquar Cat No: ACN CHR 1137N) or equivalent | 65 | Nos. | |
| 179 | 24.12 | Providing and Fixing C.P. Brass toilet paper holder, including cutting and making good the walls wherever Required (Make: Jaquar ACN 1153N) or equivalent | 55 | Nos. | |
| 180 | 24.13 | Providing and fixing C.P. brass towel ring Round / Square fixed to PVC cleats with C.P. brass screws including cutting and making good the walls wherever required (Make: Jaquar Cat No: AQN 7721) or equivalent | 48 | Nos. | |
| 181 | 24.14 | Providing and fixing C.P cast brass Double coat hook fixed to PVC cleats with C.P. brass screws complete as per instructions of the engineer-in-charge (Make: Jaquar ACN 1161N) or equivalent | 96 | Nos. | |
| 182 | 24.15 | Providing and Fixing 600 mm long Hand rail (Grab bar) for Handicap Toilets with Stainless Steel Screws on wooden cleats complete as per instructions of the engineer-in-charge (Jaquar \"Continental Cat No: AHS- 1507) or as per equivalent make | 32 | Nos. | |
| 183 | 24.16 | Providing and Fixing CP Hinged Arms for Handicap Toilet complete as per instructions of the engineer-in-charge (Jaquar SHA 1197) or as per equivalent make . | 16 | Nos. | |
| 184 | 24.17 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm | 49 | Nos. | |
| 185 | 24.18 | Providing and fixing soil, waste and vent pipes :100 mm dia Sand cast iron S&S pipe as per IS: 1729 | 125 | Mt | |
| 186 | 24.19 | Providing and fixing soil, waste and vent pipes: 75 mm CI pipe | 29 | Meter | |
| 187 | 24.2 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe | 26 | Nos. | |
| 188 | 24.21 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 1729 | 12 | Nos. | |
| 189 | 24.22 | Providing and fixing plain bend of required degree. 100 mm dia Sand cast iron S&S as per IS - 1729 | 12 | Nos. | |
| 190 | 24.23 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 100 mm x 100 mm x100 mm Sand cast iron S&S as per IS: 3989 | 12 | Nos. | |
| 191 | 24.24 | Providing and fixing double equal plain junction of required degree.100x100x100x100 mm Sand cast iron S&S as per IS: 3989 | 12 | Nos. | |
| 192 | 24.25 | Providing and Fixing collar: -100 mm Sand cast iron S&S as per IS: 3989 | 24 | Nos. | |
| 193 | 24.26 | Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter: 100mm | 24 | Nos. | |
| 194 | 24.27 | Providing and fixing of required size Flush Tank including all fittings etc in existing WC complete in all respect as per direction of Engineer in charge | 19 | Nos. | |
| 195 | 25 | Water supply | |||
| 196 | 26 | Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with suports, clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-In- Charge. | |||
| 197 | 26.01 | 25 mm Nominal bore | 40 | Mt | |
| 198 | 26.02 | 40 mm nominal bore | 12 | Mt | |
| 199 | 27 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc 50 mm nominal bore | 12 | Mt | |
| 200 | 28 | Providing and fixing G.I. class 'C' pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. exposed on wall | |||
| 201 | 28.01 | 40 mm nominal bore | 12 | Mt | |
| 202 | 28.02 | 50 mm nominal bore | 24 | Mt | |
| 203 | 29 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 - 15mm nominal bore | 68 | Nos. | |
| 204 | 30 | Providing and fixing forged brass lever operated flow control ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having m inimum working pressure of 10 kg/cm2 etc. complete in all respect. | |||
| 205 | 30.01 | 40 mm nominal bore | 6 | Nos. | |
| 206 | 30.02 | 50 mm nominal bore | 4 | Nos. | |
| 207 | 31 | Providing and fixing C.I butterfly valve , wafer end type class PN 1.6 as per I.S:13095 or BS:5155, including necessary nuts, bolts, gaskets & flanges etc., complete. | |||
| 208 | 31.01 | 65 mm nominal bore | 4 | Nos. | |
| 209 | 31.02 | 80 mm nominal bore | 4 | Nos. | |
| 210 | 31.03 | 100 mm nominal bore | 4 | Nos. | |
| 211 | 31.04 | 150 mm nominal bore | 4 | Nos. | |
| 212 | 32 | Providing and Fixing Stainless steel finish drinking water fountain for R.O. / Drinking water purpose with mechanical push button to control the flow and heavy gauge galvanized steel wall mounting frame including cutting and making good the walls wherever required complete in all respects as per the direction of the engineer-in-charge | 59 | Nos. | |
| 213 | 33 | Providing and fixing 1000 LPH Ro Purifier Plant including all fitting and fixture , accessories etc. complete in all respect as per approved make as per the direction of Engineer in Charge | 2 | Nos. | |
| 214 | 34 | AlUMINIUM WORKS : | |||
| 215 | 34.01 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 1221 | kg | |
| 216 | 34.02 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness (weight not less than 20 kg/ sqm) | 16 | sqm | |
| 217 | 34.03 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and ligh treflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. | 2386 | sqm | |
| 218 | 34.04 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 472 | Kg | |
| 219 | 34.05 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. | 194 | sqm | |
| 220 | 34.06 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width | 948 | Mts | |
| 221 | 34.07 | Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600 Upto 20 mm depth and 20 mm width | 234 | Mts | |
| 222 | 34.08 | ALUMINIUM WORKS :Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rustsections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately. For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) | 134 | Kg | |
| 223 | 34.09 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item.) With 8 mm thick enhance perfomance Low -E glass ( SHGC=0.45, VLT>=50%). | 227 | sqm | |
| 224 | 35 | Fully Openable(Side/ Top Hung)/Sliding/ Fully Fixed/ Partly Openable (Side/ Top Hung) & Partly Fixed Aluminium Windows Providing and fixing of fully openable/sliding/ Fully fixed/ partly openable and partly fixed windows/Doors as per the elevation drawings enclosed, fabricated out of heavy duty aluminium extruded profiles Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) grade as per specification including providing Masking Tapes on the profiles for safety against external scratches at site (Masking Tapes to be removed only at the time of handing over as per the instructions of Project Manager). The fabrication shall be done with all the joints mitred; the Outer Frames and Mullions jointed with appropriate Stainless Steel Screws and Shutter Frames jointed with Heavy Duty Aluminium Angle/ Cleat/ box sleeve and Stainless Steel Screws. Appropriate profiles of EPDM gaskets shall be inserted between aluminium frames/ beadings and glass; as well as both inside and outside around the periphery of the shutters, to make the windows air and water tight. The fixing shall be done on aluminium rough ground openings at anchorage locations, in jambs, sills and heads by drilling holes with an electric drill, inserting Stainless Steel Counter sunk screws, frosted glass as per elevationThe entire periphery shall be sealed by application of approved weather silicon sealant between the aluminium and masonry from both outside and inside to make the windows water tight. Each openable shutters shall be provided 2 nos. of 255mm adjustable Stainless Steel Friction stay, button locking handle as per design to be got approved by the Engineer- in charge. The Contractor shall make provision for fixing of exhaust fan including of cutting of glass where ever required as per Drawing and as required by Architect/ Project Manager. The Contractor shall make provision for fixing of exhaust fan including of cutting of glass where ever required as per Drawing and as required by Architect/ Project Manager.(For glazed louver window, Louver will be paid separetly item) With 8mm thick thick clear toughened glass of approved shade as per drawing. ( SHGC=0.45, VLT>=50% .) | 34 | sqm | |
| 225 | 35.01 | With 27 mm thick double insulated glazing of approved make comprising of two glass panels (6mm thick low-E Heat Strengthened clear glass on outside and 5mm thick heat strenghtened clear glass on the inside) separated by a air gap of 16mm by a metal spacer and hermetically sealed with a desiccant between two panes as per drawing.Performance factors shall be :U value = 3.3 W/m2K, SHGC=0.25, VLT>=47%. | 24 | sqm | |
| 226 | 36 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). | 25 | sqm | |
| 227 | 37 | Providing and fixing following Stainless steel ( unless otherwise mention) hardwares including all necessary screws, nails, adhesive and any other fixing hardwares. Cutting in door frames, shutters, floors and providing all other fixing arrangement and fixing of all accessories as per manufacturers standard packing and instruction to be included in the quoted rates. | |||
| 228 | 37.01 | H -Type Pull Handle of Dorma TGDI-H 350 or approved equivalent make. Length =350mm, 22mm dia, -SS304. | 9 | Nos. | |
| 229 | 37.02 | Standard Lock with Strike plate & EPC | 9 | Nos. | |
| 230 | 38 | Providing and Fixing Floor spring with std. spindle and cover plate BTS 75V EN 1-4 of DORMA make or equivalent approved make. The floor spring with backcheck and adjustable closing speed from 175°. Non hold open. As per EN 1154 and CE marked. | 9 | Nos. | |
| 231 | 38.01 | Standard Top Patch Fitting PT-20 of DORMA make or approved equivalent make. | 9 | Nos. | |
| 232 | 38.02 | Standard Bottom Patch Fitting PT-10 of DORMA make or approved equivalent make. | 9 | Nos. | |
| 233 | 38.03 | Floor stop half dome of Dorma 3108 or approved equivalent with 45 mm dia with fixing accessories in satin chrome finish. | 9 | Nos. | |
| 234 | 39 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade | 540 | Sqm | |
| 235 | 40 | Providing and laying of rebound synthetic coating complete in all respect as per direction of Engineer In Charge | 576 | Sqm | |
| 236 | 41 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment | 44 | kg | |
| 237 | 42 | Fixed / Partly Openable (Side/ Fully Fixed / Glazed Partition) with patch fittings Providing and fixing of fixed/ partly openable glazed partition with Doors as per the elevation drawings enclosed, fabricated out instaled with ss 304 grade patch fitting of DORMA or equivalent make including providing Masking Tapes on the profiles for safety against external scratches at site (Masking Tapes to be removed only at the time of handing over as per the instructions of Project Manager). Appropriate profiles of EPDM gaskets shall be inserted between aluminium frames/ beadings and glass; as well as both inside and\noutside around the periphery of the shutters, to make the glazing partition air and water tight. The entire periphery shall be sealed by application of approved weather silicon sealant between the partition and masonry from both outside and inside to make the windows water tight .With 13.5 mm thick clear toughened laminated glass system comprising of 1.52 mm PVB flim sandwitched between two layers of 6mm thick clear glass of approved shade as per drawing | 68 | sqm | |
| 238 | 43 | Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building. | 258 | Sqm | |
| 239 | 44 | Water proofing | |||
| 240 | 44.01 | Grouting with cement slurry with water proofing compound including fixing of nipple pressure grouting and finishing complete in all respect as per directions of Engineer In charge | 721 | Nos. | |
| 241 | 44.02 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken ricks/brick bats 25 mm to 115 mm size with 50% of cement ortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and pproved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing ompound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. | 454 | Sqm | |
| 242 | 44.03 | \"Providing and laying in situ seven course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).\"\n | 2763 | SQM | |
| 243 | 44.04 | Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : (i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofingb compound. (ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. (iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.Using rough kota stone | 140 | Sqm | |
| 244 | 44.05 | Providing and laying Cap cell of Supreme make board or equivalent sealing in expansion joints at all locations; including sand fill, edge preparation, cleaning, drying complete in all respects all respects as per scope of work, detailed construction drawings, site sketches, technical specifications and directions of Engineer-In-Charge. 12 mm thickness | 24 | Sqm | |
| 245 | 44.06 | Providing and laying manually or by pumping at all positions a ready mix non-shrink cementitious grout of compressive strength specified below for specified works e.g. base grouting of rotating equipment and other installation complete in all respects as per scope of work, detailed construction drawings , technical specifications and directions of the Engineer-In-Charge. [1) Approved makes are ACC, FOSROC, ROFF, SEIKA QUALCRETE. 2) Minimum coverage as per manufacturers recommendations shall be applied in absence of actual field consumption data.] 3. To be read in conjunction with relevent clause of PJS. a) Having compressive strength of 30 N/mm2 | 4 | Sqm | |
| 246 | 44.07 | Providing and laying manually or by pumping at all positions a ready mix non-shrink cementitious grout of compressive strength specified below for specified works e.g. base grouting of rotating equipment and other installation complete in all respects as per scope of work, detailed construction drawings , technical specifications and directions of the Engineer-In-Charge. [1) Approved makes are ACC, FOSROC, ROFF, SEIKA QUALCRETE. 2) Minimum coverage as per manufacturers recommendations shall be applied in absence of actual field consumption data.] 3. To be read in conjunction with relevent clause of PJS. b) Having compressive strength 45 N/mm2 | 4 | Sqm | |
| 247 | 44.08 | Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/running meter and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/running meter. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running meter per coat. | 577 | Sqm | |
| 248 | 44.09 | Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed( Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work | 658 | Nos. | |
| 249 | 44.1 | Providing and laying manually or by pumping at all positions a ready mix non-shrink cementitious grout of compressive strength specified below for specified works e.g. base grouting of rotating equipment and other installation complete in all respects as per scope of work, detailed construction drawings , technical specifications and directions of the Engineer-In-Charge. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/running meter and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/running meter. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running meter per coat. | 297 | Sqm | |
| 250 | 44.11 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surfaceFor vertical surface two coats @ 0.70 kg per sqm | 2192 | Sqm | |
| 251 | 44.12 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm. | 1416 | Sqm | |
| 252 | 45 | Providing and fixing toilet cubicle systems of approved equivalent make and manufactured in standard dimensions of 600mm width door size with 12mm thick solid Compact Laminate panels including doors, pilasters & intermediate panels, which should beresistant to heat, bacteria, water, chemical, scratch and impact. Finished product should be as per approved texture, shade & drawing detailing and developed according to IS-2046 and BS-476/97 standards. The toilet cubicle setup shall include necessary hardware fittings, made out of stainless steel (Grade-304), as per manufacturer’s specifications and approved by Engineer-in-charge. Hardware fittings should consist of (1) Stainless steel Door knob (2) Stainless steel Gravity hinges (3 nos.) not less than 75mm length and weight not less than 210 grams (3) Stainless steel Thumb-turn lockset with indicators (4) Stainless steel Coat hook with nylon door stopper (5) Stainless steel U-channels of 20 gauge and 12X20mm size (6) Stainless steel Adjustable foot/pedestal to give 150mm clearance from bottom and of weight not less than 600grams.(7) Stainless steel Top rail pipe(OD:24mm of 18 gauge) with corner connectors (8) Stainless Steel Head Rail Tubular Holder of weight not less than 200 grams. (9) Rubber noise deafening tape (10) Stainless steel Screws and wall plugs. The top fitting arrangement shall comprise of stainless steel\n | |||
| 253 | 45.01 | a)L-Shape Toilet cubicle with standard dimensions of 2025 mm (Height) x 900mm (Width) x 1500mm (Depth) consisting of 600 mm width of door.The rate includes cost of 12mm Solid compact laminate board along with all necessary fixtures mentioned above | 26 | Nos. | |
| 254 | 45.02 | b) I-shape (front partition) toilet cubicle with standard dimensions of 2025 mm (Height) x 1000 mm (Width) consisiting of 600 mm Width of door .The rate includes cost of 12mm Solid compact laminate\nboard along with all necessary fixtures mentioned above | 6 | Nos. | |
| 255 | 46 | Providing and fixing 6mm thick frame less bevelled (25 to 40mm) edge mirror of all shapes and sizes with 12mm thick marine ply (conforming to IS 710) backing fixed to wall with approved fastener including providing and fixing 300 micron HDPE film as vapour barrier & polyyethylene bubble sheet between mirror and backing ply including all necessary fixing arrangement like nails/ screws dash fastener, wood preservative paint, stainless steel studs (at four corners) etc. complete or as approved by Engineer -in-Chief. | 8 | SQM | |
| 256 | 47 | Providing & fixing Cushion board panels on wall (size = 1200x2100mm) as per given Architectural detail (Dwg. no.- SH/AR/800). Panels to be fixed on grid of 600x700 mm of Marandy wood ( 1\"x2\" batons). For base support of 40 mm thk. foam, 12 mm thk. ply board to be used. Foam to be covered from all sides by leatherite finish fabric, stretched & complete in all sense & approved by Engg.- in charge. For the purpose of payment surface area of panel to be measured | 375 | Sqm | |
| 257 | 48 | Providing and fixing Acoustics tiles made of wood Fibre cement composites covered with Acoustically Transparent Absorptive microfibers on the front side 25mm thick with an option of colours as per the choice of the Engineer-In-Charge of size 600X1200 mm, noise absorption of 0.9 NRC as per ISO: 354-1985 and ASTM 423- 90 a, STC of 47 as per ASTM E90/413 for 25mm, Density 400 kg/ m3, meets stringent fire ratings ASTM D-876, Weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60deg. Celcius (140deg. Farenhite) for 15 days= No deterioration. Conforms to En 131682001 and are RoHS Complaint. To be installed on Himalyan Acoustics G.I studs 2400mmX50mm web, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of ACOUSTICS including 50mm thick absorb wool / Insulation, all necessary fixing arrangement etc complete as per drawing and directed by Engineer-In-Charge. | 798 | Sqm | |
| 258 | 49 | Drilling with core cutting machine in Post RCC beams, slabs, floors etc. if not mentioned in the drawing but required by Engineer-incharge for laying pipes and rendering the same in RCC of equivalent grade of concrete, finishing the same to the satisfaction of the Engineer-in-charge, including nominal reinforcement wherever required, complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes, filling the gap with water proof cement mortar. (Maximum thickness of RCC members shall be 300mm) and as directed by Engineer-In-Charge.RCC Slabs | |||
| 259 | 49.01 | 100 mm | 5 | Nos. | |
| 260 | 49.02 | 150 mm | 5 | Nos. | |
| 261 | 49.03 | 200 mm | 5 | Nos. | |
| 262 | 50 | Drilling with core cutting machine in Post RCC beams, slabs, floors etc. if not mentioned in the drawing but required by Engineer-incharge for laying pipes and rendering the same in RCC of equivalent grade of concrete, finishing the same to the satisfaction of the Engineer-in-charge, including nominal reinforcement wherever required, complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes, filling the gap with water proof cement mortar. (Maximum thickness of RCC members shall be 300mm) and as directed by Engineer-In-Charge : RCC Wall | |||
| 263 | 50.01 | 65 mm | 5 | Nos. | |
| 264 | 50.02 | 160 mm | 5 | Nos. | |
| 265 | 50.03 | 180 mm | 5 | Nos. | |
| 266 | 51 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | 438 | sqm | |
| 267 | 52 | Providing and fixing of swimming pool ladder of 4 steps minium 2 Mts length complete in all respect as per directions of Engineer In charge | 4 | Nos. | |
| 268 | 53 | Providing and fixing of swimming pool ladder of 3 steps minium 1.5 Mts length complete in all respect as per directions of Engineer In charge | 4 | Nos. | |
| 269 | 54 | Providing and laying of synthetic rebound coating layer finishing complete in all respect as per directions of Engineer In charge | 136 | sqm | |
| 270 | 55 | Horticulture and land scapping work | |||
| 271 | 55.01 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). | 453 | Cum | |
| 272 | 55.02 | Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming withrequired tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge | 1509 | Sqm | |
| 273 | 56 | Electrical | |||
| 274 | 57 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC FRLS (HMS) conduit, with modular switch, modular plate, suitable GI box for recess or PVC box for surface arrangement and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. | |||
| 275 | 57.01 | Primary Points | 49 | Point | |
| 276 | 57.02 | Primary Points (excluding supply and fixing of PVC conduit and modular box) | 15 | Point | |
| 277 | 58 | Wiring for light point with 2X2.5+1X2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC FRLS conduit. Wire to laid from existing light point to other light point as per approved drawing. Item include supply of wire, PVC conduit and other required accessories. | |||
| 278 | 58.01 | Loop Points | 154 | Point | |
| 279 | 58.02 | Loop Points (excluding supply and laying of conduit) | 146 | Point | |
| 280 | 59 | Wiring for light point with 2X1.5+1X1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC FRLS conduit. Wire to laid from existing light point to other light point as per approved drawing. Item include supply of wire, PVC conduit and other required accessories. | |||
| 281 | 59.01 | Loop Points | 70 | Point | |
| 282 | 60 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/ raceway as required. | |||
| 283 | 60.01 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire | 304 | Mtr. | |
| 284 | 60.02 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | 5989 | Mtr. | |
| 285 | 60.03 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire | 2959 | Mtr. | |
| 286 | 60.04 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire | 187 | Mtr. | |
| 287 | 60.05 | 4 X 4 sq. mm (RYBN) | 306 | Mtr. | |
| 288 | 60.06 | 4 X 10 sq. mm (RYBN) | 241 | Mtr. | |
| 289 | 60.07 | 2 x 6 sq. mm | 500 | Mtr. | |
| 290 | 61 | Redrawing of single core cable / wire in existing PVC/Steel conduit in recess /surface. Excluding supply of single core cable / wire and conduit. | |||
| 291 | 61.01 | 3 x 2.5 sq. mm | 25 | Mtr | |
| 292 | 62 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the brick wall / RCC and making good the same in case of recessed conduit as required. | |||
| 293 | 62.01 | 25 mm | 758 | Mtr | |
| 294 | 62.02 | 32 mm | 1120 | Mtr | |
| 295 | 63 | Supplying and fixing of following sizes of heavy duty PVC conduit along with accessories in surface/recess including cutting the brick wall / RCC and making good the same in case of recessed conduit as required. | |||
| 296 | 63.01 | 20 mm | 490 | Mtr | |
| 297 | 63.02 | 25 mm | 2075 | Mtr | |
| 298 | 63.03 | 32mm | 200 | Mtr | |
| 299 | 64 | Supplying of following modular switch/ socket on the existing modular plate & switch box including connections but excluding supply of modular box and plate etc. as required. | |||
| 300 | 64.01 | 5/6 amps switch | 729 | Each | |
| 301 | 64.02 | 15/16 A switch | 332 | Each | |
| 302 | 64.03 | 3 pin 5/6 A socket outlet | 538 | Each | |
| 303 | 64.04 | 6 pin 15/16 A socket outlet | 333 | Each | |
| 304 | 64.05 | 2 way 5/6 A switch | 1 | Each | |
| 305 | 65 | Fixing of following modular switch/ socket on the existing modular plate & switch box including connections but excluding supply of modular box and plate etc. as required. | |||
| 306 | 65.01 | 5/6 amps switch | 721 | Each | |
| 307 | 65.02 | 15/16 A switch | 332 | Each | |
| 308 | 65.03 | 3 pin 5/6 A socket outlet | 537 | Each | |
| 309 | 65.04 | 6 pin 15/16 A socket outlet | 333 | Each | |
| 310 | 65.05 | 2 way 5/6 A switch | 1 | Each | |
| 311 | 66 | Supplying and fixing of 3 Modules, switch box (surface mounted type) alongwith modular base & cover plate for modular switches etc. as required. | 16 | Each | |
| 312 | 67 | Supplying of Single modular stepped type electronic fan regulator on the existing modular plate switch box including connections. | 31 | Each | |
| 313 | 67.01 | Fixing of Single modular stepped type electronic fan regulator on the existing modular plate switch box including connections. | 31 | Each | |
| 314 | 68 | Supplying of modular blanking plate on the existing modular plate & switch box excluding modular plate as required. | 160 | Each | |
| 315 | 68.01 | Fixing of modular blanking plate on the existing modular plate & switch box excluding modular plate as required. | 160 | Each | |
| 316 | 69 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. | |||
| 317 | 69.01 | 1/2 Module (75mmX75mm) | 9 | Each | |
| 318 | 69.02 | 3 Module (120mmX75mm) | 23 | Each | |
| 319 | 69.03 | 4 Module (125mmX75mm) | 1 | Each | |
| 320 | 69.04 | 6 Module (200mmX75mm) | 11 | Each | |
| 321 | 69.05 | 12 Module | 2 | Each | |
| 322 | 70 | Supplying following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. | |||
| 323 | 70.01 | 1 or 2 Module (75mmX75mm) | 7 | Nos. | |
| 324 | 70.02 | 3 Module (100mmX75mm) | 1 | Nos. | |
| 325 | 71 | Supplying of following Modular base & cover plate on existing modular metal boxes etc. as required. | |||
| 326 | 71.01 | 1/2 Module | 49 | Each | |
| 327 | 71.02 | 3 Module | 108 | Each | |
| 328 | 71.03 | 4 Module | 17 | Each | |
| 329 | 71.04 | 6 Module | 101 | Each | |
| 330 | 71.05 | 8 Module | 7 | Each | |
| 331 | 71.06 | 12 Module | 154 | Each | |
| 332 | 72 | Fixing of following Modular base & cover plate on existing modular metal boxes etc. as required. | |||
| 333 | 72.01 | 1/2 Module | 49 | Each | |
| 334 | 72.02 | 3 Module | 108 | Each | |
| 335 | 72.03 | 4 Module | 17 | Each | |
| 336 | 72.04 | 6 Module | 101 | Each | |
| 337 | 72.05 | 8 Module | 7 | Each | |
| 338 | 72.06 | 12 Module | 154 | Each | |
| 339 | 73 | Supplying and fixing following Modular cover plate on existing modular metal boxes etc. as required. | |||
| 340 | 73.01 | 12 Module | 1 | Each | |
| 341 | 74 | Supply of light fixture similar to model no. TCW 450 of M/s Philips or WIF83228 SGW (2xTL5 -2x28W) of M/s Wipro or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works), but excluding lamps | 83 | Each | |
| 342 | 74.01 | Supply of light fixture similar to model no. TCW 450 of M/s Philips (1xTL5 -1x28W) of M/s Wipro or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works), but excluding lamps | 103 | Each | |
| 343 | 74.02 | Supply of fluroscent tubelight- T5, 28Watt, High energy efficent, Luminous flux min. 2600 lm (Nom.), Colour temp. 4100 - 6500K of make M/s Philips or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works) | 262 | Each | |
| 344 | 74.03 | Supply of fluroscent tubelight- T5, 54Watt, High energy efficent, Luminous flux min. 4800 lm (Nom.), Colour temp. 4100 - 6500K of make M/s Philips or Osram or equivalent(Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works) | 14 | Each | |
| 345 | 74.04 | Supply of light fixture similar to model no. TMS 122M (2xTL5-54w, EBP) of M/s philips or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works), except supply of lamps. | 7 | Each | |
| 346 | 74.05 | Installation of light fixture similar to model no. TCW 450 or TMS122M (2xTL5 EBP) of Philips or WIF 83228 SGW of M/s Wipro with lamps make or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works). Item include supply of hanging (SS gripple wire & hook/ MS painted chain) / mounting arrangement, accessories complete in all respect. | 114 | Each | |
| 347 | 75 | Supply of light fixture similar to model no. TMS 122M (2x28WTL5) - EBT of M/s philips or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works), but excluding lamps | 4 | Each | |
| 348 | 75.01 | Installation of light fixture similar to model no. TMS 122M (2x28WTL5) - EBT M/s philips with lamps make or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works). Item include supply of hanging / mounting arrangement, accessories complete in all respect. | 107 | Each | |
| 349 | 76 | Supply of light fixture similar to model no. WIF20128 with high energy efficeint T5 lamp or WI0- 921208 + LL13-161-656 led tube of M/s wipro make or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)complete in all respect. | 69 | Each | |
| 350 | 76.01 | Installation of light fixture similar to model no. WIF20128 with high energy efficient lamps or model no. WI0- 921208 + LL13-161-656 led tube) make Wipro or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works). Item include supply of hanging / mounting arrangement complete in all respect. | 69 | Each | |
| 351 | 77 | Supplying of Pendent Ceiling Mounted LED fixture complete with driver (constant current and constant voltage) complete in every way as required. (Wipro Cat no. CRCO10S038HP57 or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 863 | Each | |
| 352 | 77.01 | Supplying of Pendent (SS Suspension Kit) WVX821MSL of M/s Wipro make or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works) for erection of hanging / pendent light fixture | 339 | Each | |
| 353 | 77.02 | Installation, Testing and Commisioning of Pendent Ceiling Mounted fixture complete with driver (constant current and constant voltage) including supply of Flexible conduit, connecting wire till mounting level, terminal connector complete in every way as required. (Wipro Cat no. CRCO10S038HP57 or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 123 | Each | |
| 354 | 78 | Supplying of Recess Mounted fixture complete with driver (constant current and constant voltage) with CFL lamps, complete in every way as required. (Wipro Cat no. WCP 32218 or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 93 | Each | |
| 355 | 78.01 | Supplying of Recess Mounted fixture complete with Electronic choke, CFL lamps with erection support, PVC flexible conduit with wiring, terminal, connection complete in every way as required. (Wipro Cat no. WCP27218 SGW (TC-D) or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 15 | Each | |
| 356 | 78.02 | Installation, Testing and Commisioning of Recess Mounted fixture with CFL lamps, SS suspension kit, PVC flexible conduit with wiring till mounting level, terminal connector complete in every way as required. (Wipro Cat no. WCP32218, (Wipro Cat no. WCP27216 SGW (TC-D) or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 108 | Each | |
| 357 | 79 | Supplying of Surface Mounted LED fixture complete with driver (constant current and constant voltage) complete in every way as required. (Wipro Cat no. CRDL 11S017HP57 or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 673 | Each | |
| 358 | 79.01 | Installation, Testing and Commisioning of Surface Mounted LED fixture complete with driver (constant current and constant voltage) include supply of erection support, PVC conduit and wire till mounting level, terminal connector complete in every way as required. (Wipro Cat no. CRDL 11S017HP57 or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 673 | Each | |
| 359 | 80 | Supplying of Surface Mounted fixture complete with driver (constant current and constant voltage) with CFL lamps complete in every way as required. (Wipro Cat no. GCP61218-2x18W CFL or Model no. FBH145M 2X PL-C/ 2P1-G8W or SM200C Cirrus Mini pro of M/s Philips make or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works) | 95 | Each | |
| 360 | 80.01 | Installation, Testing and Commisioning of Surface Mounted fixture complete with driver with erection support, terminal connector complete in every way as required. (Wipro Cat no. GCP61218-2x18W CFL or Model no. FBH145M 2X PL-C/ 2P1-G8W or SM200C Cirrus Mini pro of M/s Philips make or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 92 | Each | |
| 361 | 81 | Supplying of Mirror light Surface Mounted fixture complete with driver (constant current and constant voltage) complete in every way as required. (Wipro Cat no. WRF2118 with lamp or Cat no. LL20-111-XXX-65-NE or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 9 | Each | |
| 362 | 81.01 | Installation, Testing and Commisioning of Mirror light Surface Mounted with lamps, erection support, terminal connector, complete in every way as required. (Wipro Cat no. WRF2118 or LL20-111-XXX-65-NE or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 9 | Each | |
| 363 | 82 | Supplying of Recess Mounted LED fixture complete with driver (constant current and constant voltage) complete in every way as required. (Wipro Cat no. CECO15R013HP57 or CRCO17R013HP57 equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 166 | Each | |
| 364 | 82.01 | Installation of Recess Mounted fixture complete with driver (constant current and constant voltage) including supply of of SS wire suspension kit, PVC flexible conduit with wiring to mounting level, terminal, connection complete in every way as required. (Wipro Cat no. CECO15R013HP57 or CRCO17R013HP57 equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 166 | Each | |
| 365 | 83 | Supplying of Wall Mounted fixture (complete with ballast, starter and lamp) with erection support, terminal, connection complete in every way as required. (Wipro Cat no. WKP 14129 CFL or LW-07-141-XXX-57-XX or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 116 | Each | |
| 366 | 83.01 | Installation, Testing and Commisioning of Wall Mounted fixture (complete with ballast, starter) with erection support, terminal, connection complete in every way as required. (Wipro Cat no. WKP 14129 CFL or LW-07-141-XXX-57-XX or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 116 | Each | |
| 367 | 84 | Supplying of suspended fixture with lamp (complete with ballast, starter, lamp etc.) complete in every way as required. (M/s philips Cat. no. HPK225-1xCDM-ET150W PR or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 188 | Each | |
| 368 | 84.01 | Installation, Testing and Commisioning of celing suspended fixture with supply of structural support for erection, S/GI suspension kit, terminal connector, flexible GI conduit with wiring complete in every way as required. ( M/s philips Cat. no. HPK225-1xCDM-ET150W PR or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 188 | Each | |
| 369 | 85 | Supply of light fixture similar to model no. WIF 30254 SGW with reflector make Wipro or Model no. TMS122M, 2xTL5, 54W with reflector or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works) inlcuding high efficency lamp complete in all respect. | 12 | Each | |
| 370 | 85.01 | Installation, Testing and Commisioning of light fixture similar to model no. WIF 30254 SGW with reflector make Wipro or Model no. TMS122M, 2xTL5, 54W with reflector or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works). Item including SS/GI suspension arrangement, GI Flexible conduit and wiring till mounting level complete in all respect. | 12 | Each | |
| 371 | 86 | Supplying of celing suspended fixture with lamp (complete with ballast, starter, lam p etc.) complete in every way as required. ( Philips model no. HPK225-1XHPI-BU400W PR or equivalanet flood light for sports arena (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 36 | Each | |
| 372 | 86.01 | Installation, Testing and Commisioning of celing suspended fixture with lamp including supply of SS/GI suspension kit, structural support, connecting terminal, flexible GI conduit with wiring till mounting level, complete in every way as required. ( Philips model no. HPK225-1XHPI-BU400W PR or equivalanet flood light for sports arena (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 36 | Each | |
| 373 | 87 | Supply of light fixture with lmaps similar to model no. WIF 30228 SGW with reflector make Wipro or Model no. TPH824 with diffuser of Make Philips or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works), complete in all respect. | 139 | Each | |
| 374 | 87.01 | Installation, testing and commissioning of of light fixture similar to model no. WIF 30228 SGW with reflector make Wipro or Model no. TPH824 with diffuser of Make Philips or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works), including SS suspension arrangement, GI flexible conduit, wiring till mounting level, complete in all respect. | 139 | Each | |
| 375 | 88 | Supplying of fixture (complete with ballast, starter) simillar to Wipro Cat no. LF19-931-060-57-XX LED flood light or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)for squash court | 27 | Each | |
| 376 | 88.01 | Installation, Testing and Commisioning of Fixture (complete with ballast, starter, lamp etc.) with erection support structure, terminal connector, flexible PVC conduit with wiring complete in every way as required. (Wipro Cat no. LF19-931-060-57-XX LED flood light for squash court or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 27 | Each | |
| 377 | 89 | Supplying of surface mounted fixture (complete with ballast, starter, lamp etc.) complete in every way as required. (Wipro Cat no. LM71-441-XXX-57-SM or LM71-531-XXX-60-XX or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 225 | Each | |
| 378 | 89.01 | Installation, Testing and Commisioning of surface mounted fixture (complete with ballast, starter, lamp etc.) include supply of erection support, PVC flexible with wiring, terminal connector complete in every way as required. (Wipro Cat no. LM71-441-XXX-57-SM or LM71-531-XXX-60-XX or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 225 | Each | |
| 379 | 90 | Supplying of surface mounted fixture (complete with ballast, starter, lamp etc.) complete in every way as required. (Wipro Cat no. LW02-101-XXX-60-XX or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 28 | Each | |
| 380 | 90.01 | Installation, Testing and Commisioning of surface mounted fixture (complete with ballast, starter, lamp etc.) include supply of erection support, terminal connector complete in every way as required. (Wipro Cat no. LW02-101-XXX-60-XX or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 28 | Each | |
| 381 | 91 | Supply of 400 watt flood light fixture model no. WFT52400 Wipro make or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)alongwith lamps. | 4 | Each | |
| 382 | 91.01 | Supply of Medium bay 150 Watt MH model WFT52150 of M/s wipro or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works) with lamps for mounting on existing DG exhaust Stack structure or on building top. Item shall include all accessories required for mounting. | 3 | Each | |
| 383 | 91.02 | Installation, connection and testing of Medium bay 150 Watt MH model WFT52150 or WFT52400 of M/s Wipro or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works) with lamps for mounting on existing DG exhaust Stack structure or on building. Item shall include all accessories like MS bracket, anchor bolt, structural support, Pipe, etc. required for mounting compleet in all respect. | 7 | Each | |
| 384 | 91.03 | Installation of light fixture Model no. WVF 53414 of Make-WIPRO or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works), including with suitable length of gripple hanger and wires for connecting the fixtures to the point through connector block in PVC flexible, fixing clamps, GI bolts and nuts, brass screws, saddles, rawl bolts and other fixing accessories as required. | 15 | Each | |
| 385 | 92 | Area Lighting | |||
| 386 | 92.01 | Supply of bollard fixture (complete with ballast, starter, lamp etc.) with erection support, termination complete in every way as required. (Wipro Cat no. CRLA11208HP57-08 or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 59 | Each | |
| 387 | 92.02 | Installation, Testing and Commisioning of bollard fixture (complete with ballast, starter, lamp etc.) with erection support, termination complete in every way as required. (Wipro Cat no. CRLA11208HP57-08 or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 59 | Each | |
| 388 | 92.03 | Installation, testing commissioning of 3 mtr decorative pole including internal wiring, mounting of fixture, cable connection, erection support complete in every respect as required. | 59 | Each | |
| 389 | 92.04 | Supply, handling, storage 6 Mtr high octagonal pole with double arm bracket including light fitting similar to 71W LED LR-10 and LR-01 of M/s Wipro or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works). (For External Lighting) complete in all respect. | 25 | Set | |
| 390 | 92.05 | Supply, handling, storage 6 Mtr high octagonal pole with single arms including light fitting similar to 71W LED LR-10 of M/s Wipro or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works) . (For External Lighting) complete in all respect. | 7 | Set | |
| 391 | 92.06 | Supply, handling, storage 4 Mtr high octagonal pole with single arms including light fitting similar to 18W LED LR-01 of M/s Wipro or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works). (For External Lighting) complete in all respect. | 4 | Set | |
| 392 | 92.07 | Installation, testing and commissioning of 4 Mtr high octagonal pole with single arms including light fitting similar to 18W LED LR-01 of M/s Wipro or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works) . (For External Lighting). Item includes mounting of fixture, internal wiring / terminals, earthing etc as per specification complete in all respect. | 4 | Each | |
| 393 | 92.08 | Installation, testing and commissioning of 6 Mtr high octagonal pole with single arms including light fitting similar to 71W LED LR-10 of M/s Wipro or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works). (For External Lighting). Item includes mounting of fixture, internal wiring / terminals, civil foundation, earthing etc as per specification complete in all respect. | 7 | Each | |
| 394 | 92.09 | Installation, testing and commissioning of 6 Mtr high octagonal / cylindrical pole with double bracket arms including two LED light fitting, similar to M/s Wipro make model- LR-10 and LR-01 or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works) . (For External Lighting). Item inlcudes, internal cabling, mounting of fixture, nuts, washer, foundation bolt etc. complete in all respect. Excluding civil foundation work | 16 | Each | |
| 395 | 92.1 | Installation, testing and commissioning of 4 Mtr high pole including LED light fitting,. (For External Lighting). Item inlcudes, internal cabling, mounting of fixture, nuts, washer, foundation bolt etc. complete in all respect. Excluding civil foundation work | 17 | Each | |
| 396 | 92.11 | Installation, testing commissioning of 12 mtr pole including internal wiring, mounting of fixture, cable connection, foundation bolt complete in every respect as required. | 14 | Each | |
| 397 | 92.12 | Installation, testing commissioning of 12 mtr pole including internal wiring, mounting of fixture, cable connection, erection support complete in every respect as required for Ceiling mast at entry gate. | 1 | Each | |
| 398 | 92.13 | Installation testing and commissioning of two light fixture at height of 12 mtr. on existing building to be mounted on structural support. Item include complete internal wiring, fixing of fixture, connection, supply, fabrication and painting of MS structure etc. complete in all respect | 1 | Each | |
| 399 | 92.14 | Installation, testing commissioning of External light feeder pillar (weather proof panel) including RCC foundation, support structure (if required) GI / flexible HDPE pipe for cable entry, earthing connection etc. complete in all respect | 5 | Each | |
| 400 | 93 | Civil Foundation | |||
| 401 | 93.01 | Making of PCC foundation for bollards as mentioned above including GI / HDPE pipe for cable entry and fixing of foundation bolt.complete in all respect. | 49 | Each | |
| 402 | 93.02 | Making of RCC foundation for 3 mtr pole as mentioned above including GI / HDPE pipe for cable entry and fixing of foundation bolt. Supply of foundation bolt not included.complete in all respect. | 49 | Each | |
| 403 | 93.03 | Making of RCC foundation for 12 mtr pole including GI pipe for cable entry and fixing of foundation bolt complete in all respect. | 15 | Each | |
| 404 | 93.04 | Making of RCC foundation for 4/6 mtr pole as per technical specification including GI / HDPE pipe for cable entry and supply and fixing of foundation bolt with nuts complete in all respect. | 26 | Each | |
| 405 | 93.05 | Construction of PCC foundation as per technical specification, GI / flexible HDPE pipe for cable entry, earthing connection etc. complete in all respect for installation of high mast feeder pillar. | 7 | Each | |
| 406 | 94 | Supplying, handling, storage of Passive Infrared (PIR) technology based occupancy (Model CRPS13RO12A of M/s Wipro make or Model LRM1270 of M/s Philips make or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)). | 629 | Each | |
| 407 | 94.01 | Supply of Surface mounted circular box for PIR sensor (Model-(LRH1270 of M/s philips or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works)) | 571 | Each | |
| 408 | 94.02 | Installation, testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor complete with surface mounted box also include supply of PVC conduit and wire required for installation at beam bottom. | 629 | Each | |
| 409 | 95 | Providing and fixing of 3mm phenolic laminated sheet cover on existing juntion box. | 1 | Lot | |
| 410 | 96 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board (per phase isolation type), 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) | |||
| 411 | 96.01 | 6 way (4 + 18), Double door | 10 | Each | |
| 412 | 96.02 | 8 way (4 + 24), Double door | 6 | Each | |
| 413 | 96.03 | 10 way (4 + 30), Double door | 2 | Each | |
| 414 | 96.04 | 12 way (4 + 36), Double door | 2 | Each | |
| 415 | 97 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) | |||
| 416 | 97.01 | 6 way , Double door | 4 | Each | |
| 417 | 97.02 | 8 way , Double door | 8 | Each | |
| 418 | 97.03 | 10 way , Double door | 1 | Each | |
| 419 | 97.04 | 12 way , Double door | 5 | Each | |
| 420 | 98 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) | |||
| 421 | 98.01 | 12 way (4 + 36), Double door | 4 | Each | |
| 422 | 98.02 | 10 way (4 + 30), Double door | 4 | Each | |
| 423 | 99 | Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. | |||
| 424 | 99.01 | 40 A | 16 | Each | |
| 425 | 99.02 | 63 A | 8 | Each | |
| 426 | 100 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. | |||
| 427 | 100.01 | 25 A | 21 | Each | |
| 428 | 100.02 | 40 A | 82 | Each | |
| 429 | 100.03 | 63 A | 4 | Each | |
| 430 | 101 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 12 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. | |||
| 431 | 101.01 | Single Pole | 565 | Each | |
| 432 | 101.02 | Double Pole | 18 | Each | |
| 433 | 101.03 | Triple pole | 138 | Each | |
| 434 | 102 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. | |||
| 435 | 102.01 | 160A FP MCCB, 16KA | 5 | Each | |
| 436 | 102.02 | 100A FP MCCB, 16KA | 4 | Each | |
| 437 | 103 | Supply of cable of following size of 1.1KV grade multicore stranded aluminium/ copper conductor XLPE / PVC insulated & PVC sheathed armoured cable (FR Type) as per IS: 7098 (Part-1) 1988 complete as required. | |||
| 438 | 103.01 | 3.5C x 300 sqmm aluminium cable,Armoured | 4600 | Mtr. | |
| 439 | 103.02 | 3.5 core, 240sqmm, Al. Armoured | 120 | Mtr. | |
| 440 | 103.03 | 3.5 core, 95sqmm, Al. Armoured | 162 | Mtr. | |
| 441 | 103.04 | 3.5 core, 70sqmm, Al. Armoured | 118 | Mtr. | |
| 442 | 103.05 | 3.5 core, 50sqmm, Al. Armoured | 226 | Mtr. | |
| 443 | 103.06 | 3.5 core, 25sqmm, Al.. Armoured | 168 | Mtr. | |
| 444 | 103.07 | 4 core, 16 Sq.mm. cu. Armoured | 1059 | Mtr | |
| 445 | 103.08 | 4 core, 10 Sq.mm. cu. Armoured | 1950 | Mtr | |
| 446 | 103.09 | 4 core, 6 Sq.mm. cu. armoured | 1190 | Mtr | |
| 447 | 103.1 | 4 core, 4 Sq.mm. cu. armoured | 828 | Mtr | |
| 448 | 103.11 | 4 core, 2.5 Sq.mm. cu. armoured | 28 | Mtr. | |
| 449 | 103.12 | 3 core, 10 Sq.mm. cu. armoured | 212 | Mtr | |
| 450 | 103.13 | 3 core, 6 Sq.mm. cu. armoured | 632 | Mtr | |
| 451 | 103.14 | 3 core, 4 Sq.mm. cu. armoured | 2422 | Mtr | |
| 452 | 103.15 | 3 core, 2.5 Sq.mm. cu. armoured | 1079 | Mtr | |
| 453 | 103.16 | 3C x 1.5 sqmm copper cable, armoured | 50 | Mtr | |
| 454 | 103.17 | 2C x 1.5 sqmm. Copper cable,armoured | 165 | Mtr | |
| 455 | 104 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe /TRAY or on surface with clamps, cable tagging etc. required for completion of work. | |||
| 456 | 104.01 | 3.5C x 300 sqmm aluminium cable,Armoured | 4600 | Mtr. | |
| 457 | 104.02 | 3.5 core, 240sqmm, Al. Armoured | 120 | Mtr. | |
| 458 | 104.03 | 3.5 core, 95sqmm, Al. Armoured | 162 | Mtr. | |
| 459 | 104.04 | 3.5 core, 70sqmm, Al. Armoured | 118 | Mtr. | |
| 460 | 104.05 | 3.5 core, 50sqmm, Al. Armoured | 261 | Mtr. | |
| 461 | 104.06 | 3.5 core, 25sqmm, Al.. Armoured | 168 | Mtr. | |
| 462 | 104.07 | 4 core, 16 Sq.mm. cu. Armoured | 1075 | Mtr | |
| 463 | 104.08 | 4 core, 10 Sq.mm. cu. Armoured | 1935 | Mtr | |
| 464 | 104.09 | 4 core, 6 Sq.mm. cu. armoured | 1190 | Mtr | |
| 465 | 104.1 | 4 core, 4 Sq.mm. cu. armoured | 678 | Mtr | |
| 466 | 104.11 | 4 core, 2.5 Sq.mm. cu. armoured | 118 | Mtr | |
| 467 | 104.12 | 3 core, 12 Sq.mm. cu. armoured | 212 | Mtr. | |
| 468 | 104.13 | 3 core, 6 Sq.mm. cu. armoured | 644 | Mtr | |
| 469 | 104.14 | 3 core, 4 Sq.mm. cu. armoured | 1227 | Mtr | |
| 470 | 104.15 | 3 core, 2.5 Sq.mm. cu. armoured | 482 | Mtr | |
| 471 | 104.16 | 3C x 1.5 sqmm copper cable, armoured | 50 | Mtr | |
| 472 | 104.17 | 2C x 1.5 sqmm. Copper cable,armoured | 125 | Mtr | |
| 473 | 105 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench, cable tagging etc as required. | |||
| 474 | 105.01 | Upto 35 sq. mm | 1226 | Mtr | |
| 475 | 106 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench, cable tagging etc as required. | |||
| 476 | 106.01 | Upto 35 sq. mm | 1139 | Mtr | |
| 477 | 106.02 | Above 35 sqmm Upto 95 sq. mm | 40 | Mtr | |
| 478 | 107 | Supplying and making end termination with brass double compression gland and aluminium / tinned copper lugs (for Al/ Copper cable respectively) for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1KV grade as required. | |||
| 479 | 107.01 | 3.5 core, 300sqmm, Al. Armoured | 44 | Each | |
| 480 | 107.02 | 3.5 core, 240sqmm, Al. Armoured | 4 | Each | |
| 481 | 107.03 | 3.5 core, 150sqmm, Al. Armoured | 1 | Each | |
| 482 | 107.04 | 3.5 core, 120sqmm, Al. Armoured | 3 | Each | |
| 483 | 107.05 | 3.5 core, 95sqmm, Al. Armoured | 2 | Each | |
| 484 | 107.06 | 3.5 core, 70sqmm, Al. Armoured | 12 | Each | |
| 485 | 107.07 | 3.5 core, 50sqmm, Al. Armoured | 8 | Each | |
| 486 | 107.08 | Above dia. 3Cx6 sqmm cable to 3.5 / 4CX35 sqmm cable | 156 | Each | |
| 487 | 107.09 | Upto dia. 3Cx6 sqmm cable | 222 | Each | |
| 488 | 108 | Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. | |||
| 489 | 108.01 | upto 4 C x 16 sqmm. | 4 | Each | |
| 490 | 108.02 | 3.5 C x 120 aluminium sqmm | 1 | Each | |
| 491 | 108.03 | 3.5c x70 aluminium sqmm | 1 | Each | |
| 492 | 108.04 | 3.5Cx 300 sqmm aluminium cable | 16 | Each | |
| 493 | 109 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts or supported from wall by Painted MS angle 25X25x3mm suspended at an interval not more than 1200mm, etc. as required. | |||
| 494 | 109.01 | 50 mm width X 50 mm depth X 1.6 mm thickness | 88 | Mtr. | |
| 495 | 109.02 | 100 mm width X 50 mm depth X 1.6 mm thickness | 458 | Mtr. | |
| 496 | 109.03 | 150 mm width X 50 mm depth X 1.6 mm thickness | 86 | Mtr. | |
| 497 | 109.04 | 300 mm width X 50 mm depth X 1.6 mm thickness | 69 | Mtr. | |
| 498 | 109.05 | 450 mm width X 50 mm depth X 2.0 mm thickness | 18 | Mtr. | |
| 499 | 110 | Providing and fixing G.I. strip on surface / recess / tray for connections etc. as required. Item includes, fixing support, anticorrosive paints at joints, welding, nut, bolts, washer, making of necessary holes for connection of earthing cables or GI wires etc. | |||
| 500 | 110.01 | 25 mm X 3 mm | 1463 | Mtr. | |
| 501 | 110.02 | 25 mm X 5 mm | 259 | Mtr. | |
| 502 | 110.03 | 50 mm X 6 mm | 63 | Mtr. | |
| 503 | 111 | Providing and laying G.I. strip on in trench for earth connections. Item includes anticorrosive painting at jonts, welding, nut, bolts, excavation, backfilling, levelling, compaction including all civil works as required. | |||
| 504 | 111.01 | 25 mm X 3 mm | 159 | Mtr. | |
| 505 | 111.02 | 50 mm X 6 mm | 243 | Mtr. | |
| 506 | 111.03 | 50 mm X 10 mm | 50 | Mtr. | |
| 507 | 112 | Providing and fixing 6.00 sqmm copper wire (Green or yellow with green strip coloured PVC insulation) on surface or in recess for loop earthing as required. Including cable tie, lugs, nut and spring washer, bolts etc. as required. | 84 | Mtr. | |
| 508 | 113 | Providing and fixing 6 SWG GI wire on surface or in recess for earthing as required. Including cable tie, lugs, nut and spring washer, bolts etc. as required. | 803 | Mtr. | |
| 509 | 114 | Supply of modular surge arrester - 3 poles + N - 15kA | 78 | Each | |
| 510 | 114.01 | Supply of modular surge arrester - 1 poles + N - 15kA | 476 | Each | |
| 511 | 114.02 | Fixing of modular surge arrester - 3 poles + N - 15kA including connection and accessories as required | 78 | Each | |
| 512 | 114.03 | Fixing of modular surge arrester - 1 poles + N - 15kA including connection and accessories as required | 476 | Each | |
| 513 | 115 | Supply of 5 star rated energy efficient ceiling fan with 1200mm sweep (color - opal white) similar to model entrust 50 of M/s Crompton make or equivanlent, including wiring of down rods of required length (upto 900mm) with 1.5sqmm FR PVC insulated copper conductor single core cable, including providing and fixing of phenolic laminated sheet cover on fan box etc. as required. | 377 | Each | |
| 514 | 115.01 | Installation of ceiling fan, including wiring of down rods of required length (upto 900mm) with 1.5sqmm FR PVC insulated copper conductor single core cable, including providing and fixing of phenolic laminated sheet cover on fan box etc. as required. | 117 | Each | |
| 515 | 116 | Earthing system | |||
| 516 | 116.01 | Supply and Installation of long life,Maintenance Free Electrolytic Earthing System with 12 feet rod,14mm dia.The electrode shall be surrounded by suitable powdered form of backfill so as to provide maximum contact between the electrode and the backfill. Item include excavation in hard / soft / soil, fixing of earthing rod, filling of chemical GEM, backfilling of soil, levelling and disposing of surplus soil (if any) as per the instruction of Engg. incharge, excluding supply of backfill material and earthing rod. | 7 | Each | |
| 517 | 116.02 | Constructing masonry Chamber 70x70x30 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand), i/c necessary excavation, foundation concrete 1:5:12 ( 1 cement : 5 fine sand : 12 graded stone aggregate 40mm nominal size ) and inside and outside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design | 56 | Each | |
| 518 | 116.03 | Fixing of C. I. Surface cover box 300x300 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), complete as per standard design suitable for above masonary chamber | 73 | Each | |
| 519 | 116.04 | Testing of existing earth pit /Grid resistance. Supply and erection of identification board for each pit indicating individual pit resistance, Grid Resistance and Date of testing as per standard and in accordance with darwing / standards and the instruction of Engg. Incharge | 160 | Each | |
| 520 | 117 | Supply and laying of elastomeric insulating mat suitable for 3.3 kV, conforming to IS -15652-2006 of class A, thickness 3mm.complete in all respect. | 376 | Mtr. | |
| 521 | 118 | Internal panel control wiring, bus bar tightening, panel alignment, leveling, testing and commissioning of Main Electrical panel of Sports Complex Complete in all respect as per direction of Engineer In Charge | 5 | Each | |
| 522 | 119 | UPS System | |||
| 523 | 119.01 | Supply and Installation of 40 KVA UPS (three phase input an three phase ouput ) as per specification. Testing and commissioning of UPS system with pre installed (Maintenance free lead acid) battery bank.complete in all respect as per the direction engineer in charge | 1 | Set | |
| 524 | 119.02 | Charging of UPS system on load ( 60Kva / 40 Kva ).complete in all respect as per the direction engineer in charge | 4 | Set | |
| 525 | 119.03 | Installation and charging of 10 KVA UPS with battery bank and battery monitoring system, including shifting of material to Sports complex from ESS-05 includes providing technical coordination inacquiring remote communication of system.complete in all respect as per the direction engineer in charge | 1 | Set | |
| 526 | 119.04 | Charging of 20 KVA UPS( three phase input and three phase output) with battery and battery monitoring system.complete in all respect as per the direction engineer in charge | 1 | Set | |
| 527 | 120 | Supply and fixing of Aluminum strip for cable tagging (Sixe 120mm x 25mm, ) and cable tie for cable dressing, Stamping for cable tag as per requirement and fixing of cable tag on already installed cable.complete in all respect as per the direction engineer in charge | 1 | Lot | |
| 528 | 121 | Installation, testing and commisioning of Battery monitoring system and providing technical coordination in acquiring remote communication of system. Part system is installed at site.complete in all respect as per the direction engineer in charge | 5 | Set | |
| 529 | 122 | Fire retardant paint of half hour rating over cable in buildings (complete on vertical runs and painting of one meter length for every 20 meter horizontal runs) for all buildings (POD-03, Studio, Boys hostel, School, Sports complex) complete in all respect as per the direction engineer in charge | 1 | Lot | |
| 530 | 123 | Installation, testing and commissioning of power distribution panel complete in all respect as per the directions of Engineer In charge | |||
| 531 | 123.01 | UPS power distribution panel | 2 | Set | |
| 532 | 123.02 | Main power panel CSE-02 Emergency Supply | 1 | Set | |
| 533 | 123.03 | Main power panel CSE-02 Normal Supply | 1 | Set | |
| 534 | 123.04 | Wall mounted HVAC power distribution panel | 1 | Set | |
| 535 | 123.05 | Wall mounted Sump pump starter panel | 1 | Set | |
| 536 | 123.06 | Testing and commissioning of HVAC power distribution panel | 3 | Set | |
| 537 | 124 | Miscellenous work including supply and fixing of Distribution board lock, front cover, door of SPN / TPNDB, balance dressing of existing DB's/UPSDB inlcuding supply of lugs, ferrule, wire, termination of cable (At DB end), busbar, Terminal block, making arrangement for fixing of MCB/SPD by modification in of front cover, painting of Corroded DB etc. for completeness of work as per requirement. (Includes all buildings of POD-03, School building ground floor and UPS DB of school building etc.) | 1 | Lot | |
| 538 | 125 | Testing and commissioning of HVAC starter panel for cabinet Exhaust Fan complete in all respect as per directions of Engineer In charge | 3 | Set | |
| 539 | 126 | Installation of Liftwell pressrization fan. Testing and commissioning of fan and its starter panel complete in all respect as per directions of Engineer In charge | 5 | Set | |
| 540 | 127 | Supply and fixing of MCCB Handle Knob Make schneider complete in all respect as per directions of Engineer In charge | 4 | Set | |
| 541 | 128 | Supply of Pre galvanized sheet steel raceway of 1.6 mm thick of following sizes with top openable GI sheet cover complete as requirement alongwith all accessories. | |||
| 542 | 128.01 | 50 X 38mm | 18 | Mtr. | |
| 543 | 128.02 | 100x 38mm | 53 | Mtr. | |
| 544 | 128.03 | Junction Box 150x 150 | 7 | Nos. | |
| 545 | 129 | Fixing, laying of Pre galvanized sheet steel raceway of 1.6 mm thick of following sizes with top openable GI sheet cover complete as requirement alongwith all accessories. | |||
| 546 | 129.01 | 50 X 38mm | 18 | Mtr. | |
| 547 | 129.02 | 100x 38mm | 78 | Mtr. | |
| 548 | 129.03 | Junction Box 150x 150 | 7 | Nos. | |
| 549 | 130 | Junction box - Enclosure made of 2mm CRCA sheet with 415 V Aluminum TPN busbar with PVC sleeve installed alongwith insulator suitable for termination of 3.5C X 150 Sqmm Al. cable and 4 runs 4C X 16 Sqmm copper cable. Enclosure shall be wall mounted with 5mm Aluminium Gland plate at top and bottom both. complete in all respect as per the direction engineer in charge | 1 | Nos. | |
| 550 | 131 | Junction box - Enclosure made of 2mm CRCA sheet with 415 V Aluminum TPN busbar with PVC sleeve installed alongwith insulator suitable for termination of 2 Runs 3.5 C X 50 Sqmm Al. cable and 3 Runs 4 C X 16 Sqmm copper cable. Enclosure shall be wall mounted with 5mm Aluminium Gland plate at top and bottom both. complete in all respect as per the direction engineer in charge | 1 | Nos. | |
| 551 | 132 | Installation, testing and commissioning of Electrical panel in Basement. Item includes handling, shifting to location, supply and fabrication of steel structure for making base support for panel erection at level of +450mm leevl from FFL, anchor fastener, etc.complete in all respect as per the direction engineer in charge | 1 | Set | |
| 552 | 133 | Testing and commissioning of Main Electrical panel (PCC and MCC panel). Item also includes rectification of any damaged parts, balance / defective interpanel wiring, control wiring etc. Providing and fixing of of any missing accessories like auxillary contact , indicating lamp, push button etc. as per approved drawing.complete in all respect as per the direction engineer in charge | 2 | Set | |
| 553 | 134 | Testing and commissioning of DOL/Start delta starter ventillation panel. Item also includes supply and laying of balance / defective interpanel wiring, control wiring etc. Providing and fixing of of any missing accessories like auxillary contact , indicating lamp, push button etc. as per approved drawing.complete in all respect as per the direction engineer in charge | 1 | Set | |
| 554 | 135 | Testing and commissioning of installed PLC based water level control panel and conforming all the safety interlocks provided. complete in all respect as per the direction engineer in charge | 3 | Each | |
| 555 | 136 | Supply and Installation of Aviation Obstruction Light with 2 x 5W LED complete with all accessories Similar to BAJOL of Bajaj Make with 3 mtr high 40mm dia. Medium grade GI Pipe with support structure etc. complete in all respect | 2 | Each | |
| 556 | 137 | Reinstallation of current transformer and termination of control cable in SDB-Normal and Emergency panel as per the instruction Engg. Incharge. Item include reinstallation of existing Current transformer, supply and fixing of Lugs, control wiring, PVC gland and Setting of energy meter (EM-6433). Not include supply of CTs. complete in all respect as per the direction engineer in charge | 12 | Set | |
| 557 | 138 | Supplying and fixing 3 pin, 5 A ceiling rose and Connection of installed exhaust fan. complete in all respect as per the direction engineer in charge | 24 | Nos. | |
| 558 | 139 | Installation of Electrical panel and testing and commisioning of panel with 02 nos.pressurization fan for liftwell. complete in all respect as per the direction engineer in charge | 2 | Set | |
| 559 | 140 | Supply of Line extender amplifier housed in suitable size of 16 gauge CRCA sheet enclosed. complete in all respect as per the direction engineer in charge | 2 | Each | |
| 560 | 141 | Supply, transportation, handling, storages at site, testing, of following sizes of XLPE insulated PVC sheathed, FRLS, Aluminum conductor armoured power cable of 11 KV grade as per specification. | |||
| 561 | 141.01 | 3C x 300sqmm armoured UE cable 11/11kV | 3000 | Mtr. | |
| 562 | 142 | Laying and testing of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe /TRAY or on surface with clamps, cable tagging etc. required for completion of work. Including shifting of material from storage to site, loadiing, unloading etc. for completion of works | |||
| 563 | 142.01 | Above 120 sq. mm and upto 400 sq. mm | 3000 | Mtr. | |
| 564 | 143 | Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : | |||
| 565 | 143.01 | 300 sq. mm | 2 | Each | |
| 566 | 144 | Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : | |||
| 567 | 144.01 | 300 sq. mm | 7 | Each | |
| 568 | 145 | Laying of OFC cable through existing hume pipe / cable trench. | 300 | Mtr. | |
| 569 | 146 | Jointing, termination (splicing) and testing of 6 core OFC cable including Fiber enclosure box and termination accessories complete in all respect for suitable for 6 core OFC cable | 2 | Each | |
| 570 | 147 | Supply of tools and tackles as per the list enclosed Volume-II technical specification Chapter -4 Electrical works ,Annexure-B2, complete in all respect as per the direction engineer in charge | 1 | Lot | |
| 571 | 148 | Supply of following sizes of exhaust fan (5 star rated BEE certified) suitable for single phase 230 volts, 50 Hz., AC supply complete with motor, gravity louvers/shutters etc. complete as required. (250mm dia., 1250 rpm), complete in all respect as per the direction engineer in charge | 123 | Set | |
| 572 | 149 | Installation of exhaust fan 250 /300 mm in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. complete in all respect as per the direction engineer in charge | 7 | Set | |
| 573 | 150 | Supply of Laboratory Equipment and Glassware as per list enclosed in Volume-II technical specification Chapter -4 Electrical works,Annexure-B4, complete in all respect as per the direction engineer in charge | 1 | Lot | |
| 574 | 151 | Testing and commissioning of UV panel of STP plant. Item include replacement / recitication of any faulty items.complete in all respect as per the direction engineer in charge | 1 | Set | |
| 575 | 152 | Supply and fixing of 16 A power plug suitable for connection to 6/16A power socket alongwith connection cable of 1.5 mtr. length of 1.5sqmm wire size complete in all respect | 4 | Set | |
| 576 | 153 | Supply and installation of uplighter Model No. BBP330WW of Make m/s Philips or equivalent (Refer Makes of Material list Volume-II technical specification Chapter -4 Electrical works). Item include cabling, termination, conduiting, making of trench etc. as required for completing the work in all respects. | 2 | Nos. | |
| 577 | 154 | Supplying and fixing 20 A, 415 V, TPN weather proof Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A \"C\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. complete in all respect as per the direction engineer in charge | 11 | Nos. | |
| 578 | 155 | Supply, Installation, Testing and commissioning of upto 80 mm diameter Oil flow meter, upto 80 mm diameter Fuel line for unloading of Diesel inlcuding all accessories complete in all respect. | 1 | Nos. | |
| 579 | 156 | Testing and commissioning of Bulk petroleum installation and complete pumping system. Item include rectification of any defect in the system. complete in all respect as per the direction engineer in charge | 1 | Nos. | |
| 580 | 157 | Testing of balance works of SCADA. .Testing of 11 KV panel (7-board), 11 Kv DG incomer,11 KV RMU Transformer feeder-1 and 2 (Circuit breaker On/OFF, WTI alarm / trip for ESS-13 , ESS- 07A, ESS-05, ESS-02), 2 nos. MFM of Incomer-feeder, ACB of HVAC Section-1 of ESS-07A, APFC apnel of ESS-07A, ACB for POD-04 and POD-03 (CSE) of ESS-05, MFM of POD-04 (Feeder 8F2), MFM of Incomer-2 (feeder 11F2), APFC Panel-A, MFM of buscoupler (Feeder-5F2), MFM of Incomer-2 Normal (feeder-9F2), MFM of Incomer-2 Emergency (feeder-9F2), APFC Panel of ESS-02. complete in all respect as per the direction engineer in charge | 1 | Set | |
| 581 | 158 | Shifting and installation of battery monitoring controller to nearest network rack (already installed at site). Item include necessary supply, laying of cable and conduit (Cable for BBUS, temperature sensor and Current sensor) as required for relocation of controller (Make -Powersheild, Model - Sentinel ).complete in all respect as per the direction engineer in charge | 7 | Set | |
| 582 | 159 | Rectification of minor defects of MRS and ESS's as per the list attached Volume-II technical specification Chapter -4 Electrical works ,Annexure-B1,complete in all respect as per the direction engineer in charge | 1 | Lot | |
| 583 | 160 | Training of electrical engineers at manufacturing plant Volume-II technical specification Chapter -4 Electrical works ,Annexure-B3, complete in all respect as per the direction engineer in charge | 1 | Lot | |
| 584 | 161 | Fire Alarm & Public address system | |||
| 585 | 162 | Supply, installation, testing & commissioning of networkable Microprocessor based following capacity (expandable on same CPU) Networkable analogue addressable type fire alarm control panel with min. 640 character LCD display, The panel should be equipped with sufficient numbers of loop with 15% Spare capacity in each loop. The panel shall be capable of taking atleast 250 analog addressable devices in one loop. Four access levels, capable of taking Flash Scan devices, flash EPROM sufficient numbers of programmable relay controls for controlling AHUs, pressurization fans, ventilation fans at fire pump room, monitoring of fire sprinkler and fire hydrant pump, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 2 hours during an emergency conditions as required. (UL 9th Edition Approved). The Panel shall have inbuilt netwrok communication module for coomunication to other fire alarm panel and netwrok Gateway card able to remote communicate on Modbus/Bacnet / Lonworks over TCP / IP to building management system. The panel have digital voice command center contain and shall have all equipment required for all audio control, emergency telephone system control, signaling and supervisory functions and able to connect public address sytem over RS-485 port or include necessary coverter for communication. | |||
| 586 | 162.01 | 2 loop capacity (expandable upto min. 2 loops) with Network communication card and Talkback DVC card | 3 | Set | |
| 587 | 162.02 | 2 loop capacity (expandable upto min. 2 loops) with Network communication card, Modbus Gateway card and Talkback DVC card | 2 | Set | |
| 588 | 162.03 | Interconnecting networking cable for PHY and CSE Building (NFN twisted pair, wire size 14 AWG). Approximate length of cable of PHY building (PHY-1 to PHY-2 and Phy-3 to PHY-2 - 60 mtr. each._ and CSE building From CSE-1 to CSE-2 - 120 mtr. | 2 | Set | |
| 589 | 163 | SITC of Microprocessor based 1 loop analogue addressable type fire alarm control panel with 80 (4 x 20) character Super Twist LCD display. The Loop capacity shall be able to take 198 analogue addressable devices in one loop. The Fire Alarm Panel shall have sufficient numbers of programmable relay controls for controlling AHUs, pressurization fans, ventilation fans at fire pump room, monitoring of fire sprinkler and fire hydrant pump, 220 volts AC power supply, automatic battery charger 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 2 hours during an emergency conditions as required. The Panel shall have inbuilt netwrok communication module able to remote communicate on Modbus/Bacnet / Lonworks over IP to building management system and other fire alarm panel. | |||
| 590 | 163.01 | 1 loop capacity (expandable upto min. 2 loops) with network and BMS card without Talkback DVC card. | 5 | Set | |
| 591 | 163.02 | Netwrok card and BMS (Modbus Gateway) card for Modbus communication | 5 | Set | |
| 592 | 163.03 | Integrated 8 channel Digital Voice Evacuation System capable to supervision of all the speaker circuits, with required suitable amplifiers for following Speakers and acessories required to compelete the system. The system shall be integrated with EPBAX telephone lines/ Extensions for making announce ments using Telephone/ mobile phone. The equipment shall be of same make as panel. | 3 | Set | |
| 593 | 164 | Supply of Annunciator; up to 24 points expandable to 2000 points of annunciation with Alarm or Active LED, Trouble LED and switch per circuit. Active/Alarm LEDs can be programmed (by powered up switch selection) by point to be Red, Green or Yellow and the trouble LED is always yellow. Expandable for future expansion.Item includes cabling from Fire alarm panel to repeater panel at ground floor complete in all respect, Approx. length of cable - 80 mtr. for each building of PHY and CSE | 5 | Nos. | |
| 594 | 164.01 | Installation, testing and commissioning of Annunciator; up to 24 points expandable to 2000 points of annunciation with Alarm or Active LED, Trouble LED and switch per circuit. Active/Alarm LEDs can be programmed (by powered up switch selection) by point to be Red, Green or Yellow and the trouble LED is always yellow. Expandable for future expansion.Item includes cabling from Fire alarm panel to repeater panel at ground floor complete in all respect, Approx. length of cable - 80 mtr. for each building of PHY and CSE | 5 | Nos. | |
| 595 | 165 | Supply of UL Listed Remote Annunciator (Repeater) Panel with 80 (4 x 20) characters Backlit LCD display. The Remote Annunciator will be the Display for the network systems. Mounting options include an annunciator box, and blank modules as required for mounting. The Remote Annunciator shall have six common system status lights: Alarm, Supervisory, Trouble, Monitor, AC On, & Ground Fault. Keys for Acknowledge, Silence, Reset, & Lamp Test etc. Item includes cabling from Fire alarm panel to repeater panel complete in all respect, Approx. length of cable - 65 mtr. | 6 | Nos. | |
| 596 | 165.01 | Installation of UL Listed Remote Annunciator (Repeater) Panel with 80 (4 x 20) characters Backlit LCD display. The Remote Annunciator will be the Display for the network systems. Mounting options include an annunciator box, and blank modules as required for mounting. The Remote Annunciator shall have six common system status lights: Alarm, Supervisory, Trouble, Monitor, AC On, & Ground Fault. Keys for Acknowledge, Silence, Reset, & Lamp Test etc. Item includes cabling from Fire alarm panel to repeater panel complete in all respect, Approx. length of cable - 65 mtr. | 5 | Nos. | |
| 597 | 166 | Smoke sensor, Control module, Horn and Strobes | |||
| 598 | 166.01 | Supply, Installation, testing & commissioning of addressable manual call point complete as required. Model - F/MCP/Glass | 51 | Nos. | |
| 599 | 166.02 | Supply of addressable manual call point complete as required. Model - F/MCP/Glass | 2 | Nos. | |
| 600 | 166.03 | Testing & commissioning of addressable manual call point complete as required. Model - F/MCP/Glass | 81 | Nos. | |
| 601 | 166.04 | Supply, Installation, testing & commissioning of horn cum strobe complete as required. Model - SYS/HS. Including its connection to control module. | 62 | Nos. | |
| 602 | 166.05 | Supply of horn cum strobe complete as required. Model - SYS/HS. | 2 | Nos. | |
| 603 | 166.06 | Testing & commissioning of horn cum strobe complete as required. Model - SYS/HS | 80 | Nos. | |
| 604 | 166.07 | Supply, Installation, testing & commissioning of Addressable phone control modules for Fire Fighters Telephone circuit (2 way communication) | 43 | Nos. | |
| 605 | 166.08 | Supply of Addressable phone control modules for Fire Fighters Telephone circuit (2 way communication) | 2 | Nos. | |
| 606 | 166.09 | Supply, Installation, testing & commissioning of Addressable control modules for Sounders cum strobe. Model - FCM/1 | 52 | Nos. | |
| 607 | 166.1 | Supply of Addressable control modules for Sounders cum strobe. Model - FCM/1 | 2 | Nos. | |
| 608 | 166.11 | Testing & commissioning of Addressable control / monitor modules for Fire Fighters Telephone circuit (2 way communication) or Sounders cum strobe. Model - FCM/1 | 160 | Nos. | |
| 609 | 166.12 | Supply, Installation, testing & commissioning of 2 way communication Fire Fighter's Telephone Jack | 66 | Nos. | |
| 610 | 166.13 | Supply of 2 way communication Fire Fighter's Telephone Jack | 2 | Nos. | |
| 611 | 166.14 | Supply, Installation, testing & commissioning of Addressable Relay modules for Liftwell pressurization/ Fan/ Air Washer/AHU. Model-FRM/1 | 15 | Nos. | |
| 612 | 166.15 | Supply, Installation, testing & commissioning of Addressable Monitor module for flow switch of fire fighting | 1 | Nos. | |
| 613 | 167 | Sensors, Isolator, Beam detectors | |||
| 614 | 167.01 | Supply of Multi Cooperative Sensing Analog addressable Photoelectric smoke detector with mounting based LED, Address Switch to programme the detectors from 01-125, complete as required. Model-FSP/851 | 557 | Nos. | |
| 615 | 167.02 | Installation, testing & commissioning of Multi Cooperative Sensing Analog addressable Photoelectric smoke detector with mounting based LED, Address Switch to programme the detectors from 01-125, complete as required. Model-FSP/851 | 557 | Nos. | |
| 616 | 167.03 | Testing & commissioning of Multi Cooperative Sensing Analog addressable Photoelectric smoke detector OR thermal heat detector with rate of rise cum fixed tempreature thermistor ( complete with mounting based LED, Address Switch to programme the detectors from 01-125, as required). Model-FSP/851 or FSP/851 | 321 | Nos. | |
| 617 | 167.04 | Supply, Installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. Model- FSP/851R | 38 | Nos. | |
| 618 | 167.05 | Supply, Installation, testing & commissioning of fault isolator complete with base as required. Model - ISO/X | 49 | Nos. | |
| 619 | 167.06 | Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required. | 2 | Set | |
| 620 | 168 | Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. Items include clamp with base, screws, bends, junction box, GI flexible conduit etc. | |||
| 621 | 168.01 | 32 mm | 635 | Meter | |
| 622 | 168.02 | 25mm | 242 | Meter | |
| 623 | 168.03 | 20mm | 5 | Meter | |
| 624 | 169 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. Items include clamp with base, screws, bends, junction box, GI flexible conduit etc. | |||
| 625 | 169.01 | 32mm (from fire alarm panel to shaft) | 540 | Meter | |
| 626 | 170 | Supply and Fixing of GI modular box (recess type) without base and cover plate for installation of control module / relay module / telephone jack / fault isolator / forn cum strobe etc. | |||
| 627 | 170.01 | Modular box for fixing of control / relay / strobe etc. | 136 | Nos. | |
| 628 | 170.02 | Modular box for fixing of telephone jack | 26 | Nos. | |
| 629 | 171 | Fixing of FAS material | |||
| 630 | 171.01 | Fixing of Monitor module on modular box and necessary connection | 2 | Set | |
| 631 | 171.02 | Fixing of Manual call point on modular box and necessary connection | 2 | Set | |
| 632 | 171.03 | Fixing of Telephone jack on modular box and necessary connection | 2 | Set | |
| 633 | 171.04 | Fixing of Control module on modular box and necessary connection | 1 | Set | |
| 634 | 172 | Testing and commissioning of Installed Fire alarm systemncomplete in all respect as per direction of Engineer In Charge | 2 | Set | |
| 635 | 173 | Compliance of partly commissioned fire alarm system. (Location of fire to be shown in HMI screen and integration of balance device if any) | 1 | Set | |
| 636 | 174 | Power supply lead acid batteries for stand by power of 24 hours in normal opearation and 2 hours operation in Emergency condition. | 2 | Set | |
| 637 | 175 | Network Controller | |||
| 638 | 175.01 | SITC of EN54-16 and EN-60849 compliant, standard Ethernet and TCP / IP protocol Based Digital Public Address & Voice Alarm system in 2U compact Housing. The selected system devices like controllers and Paging Microphones, should use the TCP/IP technologies and build on the standard network platform to ensure expandability. SITC of 8 zone IP based digital Voice Alarm controller expandable upto 120 zones. The voice alarm controller should be able to connect directly over Ethernet. It should have functions like the audio playing, zone control, fault monitoring, log recording, volume control and amplifier switchover. The device has integrated amplifier switching matrix to support the redundancy switching and the general dry contact input/output interface to connect the external audio sources and dry contact interface of the linkage fire system. It has a built-in 1G memory to store the audios such as digital voice messages and the alarm tone of the emergency roadcast. Play 4 alarm tones and user-defined emergency evacuation announcements simultaneously. Each device can connect upto 4 amplifier channel. It shall have RS-485 port for connectivity to fire alarm panel. Item include all interconnecting power and control cable and networking (CAT-6) cable. Simillar to Model- X-DCS2000/EN, Digital Integrated System Manager of honeywell or equivalent. Item include necessary network rack of 9U size or other dust and vermin proof mounting arrangement reuired for installation of controller and amplifier at CSE-02, PHY-02 and School building | 6 | Set | |
| 639 | 176 | Call Station and Keypads | |||
| 640 | 176.01 | SITC of IP based Networkable touch screen paging station for selection of 8 zones,\nsupervision of system status, setting of scheduled broadcasts with the following\nfunctions:\n. Built-in monitoring loudspeaker\n. Detachable goose-neck microphone\n. LCD touchscreen display\nSimilar to XNPMI of make Honeywell or equivalent | 6 | Set | |
| 641 | 177 | Amplifiers | |||
| 642 | 177.01 | SITC of 1X500W Class-D Amplifier with 1 independent channel and can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection. It shaould be 3U high 19” case suitable for rack mounting or table top. A temperature-controlled fan ensures high reliability at high output levels and low acoustic noise at lower output levels.\nMakes : Honeywell - X618 | 7 | Set | |
| 643 | 178 | PC Call Station Client & Call Server | |||
| 644 | 178.01 | A license for a PC based programmable touch or mouse controlled call-station user-interface with synoptic zone selection and status indication, to be used with PC Call Server. It should be suitable for connected via Ethernet to the the Voice Alarm system. | 1 | Set | |
| 645 | 178.02 | A license for a Windows PC based call server, used for hosting multiple PC call station clients or telephone interface clients on a TCP/IP network, supports systems with multiple network controllers, license for 1 network controller included. | 1 | Set | |
| 646 | 179 | Loudspeaker System | |||
| 647 | 179.01 | Supplying, installation, testing & commissioning of 1.5/3/6W ceiling complete as required. Item include circular brackets suitable for speakers with mounting accessories etc complete in all respect. Make- Bosch or Honeywell | 197 | Nos. | |
| 648 | 180 | Cabling and Wiring | |||
| 649 | 180.01 | Supplying & Drawing of 2 run X1.5 Sqmm FRLS flexible wire through existing PVC/ Steel conduit. Signaling line circuit to be laid from one addresable device to another addresable device to complete the fire alarm loop as per conduit layout drawing and manufacturer standard. | 333 | Loop Point | |
| 650 | 180.02 | Supplying & Drawing of 2 run X1.5 Sqmm FRLS flexible wire through existing PVC/ Steel conduit. Signaling line circuit to be laid from Main fire alarm panel to addresable device to complete the fire alarm loop (Primary and return loop as per Class-A wiring) as per conduit layout drawing and manufacturer standard. | 15 | Primary point | |
| 651 | 180.03 | Supply & Drawing of 2 run X1.5 Sqmm FRLS flexible wire through Steel / PVC conduit existing conduit. Speaker wire to be laid from one speaker point to next speaker to complete the public address circuit as per conduit layout drawing and manufacturer standard. | 151 | Loop Point | |
| 652 | 180.04 | Supply & Drawing of 2 run X1.5 Sqmm FRLS flexible wire through existing Steel / PVC conduit. Speaker wire to be laid from Nwtwork controller to speaker point of each zone to complete the public address circuit as per conduit layout drawing and manufacturer standard. | 29 | Primary point | |
| 653 | 180.05 | Supply & Laying of 2 Run X 1.5 Sqmm FRLS flexible wire for power supply to addressable control / relay module / monitor module to subsequent relay in loop | 47 | Loop Point | |
| 654 | 180.06 | Supply & Laying of 2 Run X 1.5 Sqmm FRLS flexible wire through steel / PVC existing conduit for power supply from Main fire alarm panel to nearest addressable control / relay module / monitor module as per conduit layout drawing. | 6 | Primary point | |
| 655 | 180.07 | Laying of 2 Run X 1.5 Sqmm FRLS flexible wire through steel / PVC existing conduit | 125 | Meter | |
| 656 | 180.08 | Supplying & Drawing of 1.5 Sqmm FRLS flexible wire through existing PVC/ Steel conduit. Signaling line circuit and power circuit shall be laid for relay module and completing the SLC loop complete in all respect | 3 | Set | |
| 657 | 181 | Supplying and drawing of following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit, as required. | |||
| 658 | 181.01 | 2C X 1.5 sqmm | 82 | Meter | |
| 659 | 181.02 | 4C X 1.5 sqmm | 22 | Meter | |
| 660 | 181.03 | 6C X 1.5 sqmm | 10 | Meter | |
| 661 | 182 | Supply and Laying of 2 X 1.0 sq.mm Cu. Twisted cable - for telephone circuit through the existing steel / PVC conduit | 380 | Meter | |
| 662 | 183 | Supply, laying and termination of 2 Core x 1.5 Sqmm FRLS, XLPE insulated, PVC sheathed armoured copper cable through existing cable tray/ trench for interconnection of Electrical panel and relay module. | 1080 | Meter | |
| 663 | 184 | Provinding Shunt trip coil in existing panel for remote tripping of MCCB-Model NSX or CVS of Schneider make. | 9 | Set | |
| 664 | 184.01 | Fixing of Shunt trip coil in existing panel for remote tripping of MCCB item including supply and laying of necessary wiring upto panel terminal suitable for remote tripping from relay module of fire alarm panel. This includes necessary modification in existing system and wiring to suite the requirement. | 9 | Set | |
| 665 | 185 | Elevator of POD-03 building | |||
| 666 | 185.01 | Installation, testing and commissioning of freight lift (2.0 Ton) for PHY-01 building (G+5 floors). Item includes all necessary work and other accessories required for completeness of work. This also includes supply of any defective or missing item required for proper and safe operation of lift. For detail refer scope of work of tender. complete in all respect as per the direction engineer in charge | 1 | Set | |
| 667 | 185.02 | Installation, testing and commissioning of partly installed freight lift (2.0 Ton) for PHY-03 building (G+5 floors). Item includes all necessary work and other accessories required for completeness of work. This also includes supply of any defective or missing item required for proper and safe operation of lift. For detail refer scope of work of tender. complete in all respect as per the direction engineer in charge | 1 | Set | |
| 668 | 185.03 | Testing and commissioning of partly installed freight lift (2.0 Ton) for CSE-01 building (G+6 floors). Item includes all necessary work and other accessories required for completeness of work. This also includes supply of any defective or missing item required for proper and safe operation of lift. For detail refer scope of work of tender. complete in all respect as per the direction engineer in charge | 1 | Set | |
| 669 | 185.04 | Obtaining statutory clearance (Installation clearance already available and Usage clearance needs to be taken) for two nos. freight lift 2.0 ton (G+5 floor. Bidders works inlcude preparation of forms, format, drawing, any other document, coordination with authoirity, inspection etc required for job completion | 1 | Lot | |
| 670 | 186 | Mechanical work in building | |||
| 671 | 186.01 | COOLING WATER SYSTEM FOR 300 LPH \nSupply, Installation, Testing and Commissioning of Water Chiller System complete in all respects having following technical & operational Parameters, for cooled water production :- \nA) Flow rate of outlet cooled water : 300 LPH \nB) Cooling Capacity : 10 TR \nC) Refrigerant = R 22 \nD) Power = 3 Ph/440 V / 50 Hz \nE) MOC : MS Powder Coated\nF) Pump = 500 LPH \nG) Storage Tank Capcity = 200 Ltr. \nH) Water Temprature Inlet = 35 +- 50C \nJ) Outlet Temprature = 18 +-30C\ncomplete in all respect as per the direction engineer in charge | 2 | Each | |
| 672 | 186.02 | Installation testing and commissioning of 300LPH RO water system already supplied at site. This include construction of pedestal for RO Water frame fixing. Also any material in shortfall or damaged are included in scope of supply. Any modification / rectifcation in the system if required shall be in the scope of contractor. Items like SS pipe, PVC tank, bends, digital meters, UPVC pipe, wires, lugs, glands, cable tie and other accessories as required is also included in scope. RO is partially installed at site.\ncomplete in all respect as per the direction engineer in charge | 2 | Each | |
| 673 | 187 | Electrical and mechanical for swimming pool pump room and water distribution pumps | |||
| 674 | 188 | Supply, Erection, Testing and Commissiong of horizontal monobloc Recirculation Pumps of 125 cum/hr capacity, 1400 rpm and working head of 20m with CI body, bronze impellar and stainless steel AISI 410 shaft with 440 volt, 50 Htz, 3 phase electrical motor, with built-in strainer on suction of approx. 11 litres capacity and stainless steel AISI- 316 strainer basket, expansion belows, Non return valve, Butterfly valves (suction and discharge) with flange connections, pressure guage with isolation valve etc. complete in all respects. | 5 | Each | |
| 675 | 189 | Supply, Erection, Testing and Commissioning of anticorrosive Filter (vertical type) of 2m dia manufactured with fibre glass and polyester resin, fitted with collector arms and diffuser made from unplasticised PVC and Polypropelene and capable with lid in polyester resin and fibre glass, manual air purge cap for sand discharge and PVC flanged connection for inlet and outlet, pressure guage etc. Each Filter shall have 5000 Kgs of fine sand media( 0.42-0.8 mm) and 500 Kgs of gravel media( gravel 1-2 mm). The Filter to be manufactured in conformity with following international standards. Complete in all respects. | |||
| 676 | 189.01 | Filter with Filtration Rate 32,000 lit/hr/m2 | 4 | Each | |
| 677 | 189.02 | Sand and Gravel | 4 | Lot | |
| 678 | 190 | Supply, Erection, Testing and Commisioning of Frontal Piping 150 mm PVC of 10 Kg/cm2 ( Class 5) maximum operating pressure as per IS 4985-2000 alongwith Pressure Gauges and C.I. D/F butterfly valve, pipe sockets and support, etc. complete in all respects | 4 | Set | |
| 679 | 191 | Supply, Erection, Testing and Commisioning of Alum Dosing System, for pH control complete with constant flow metering dosing pump with electronic low voltage circuit with 220 V-48 V transformer, aluminium housing with epoxy anti-acid varnish protection and anodized aluninium dial, with transparent polycarbonate lid, IP-54 protection capable of 15 l/hr @ 5 kg/cm2 with 100 litres capacity solution preparation cylindrical vertical tank with external scale with suitable manual agitator for easy installation in the tanks, solution preparation tank, stirring rod, pipe fittings, valves, supports etc. complete in all respects. | |||
| 680 | 191.01 | Dosing pump | 1 | Set | |
| 681 | 191.02 | Solution preparation tank with stirring rod | 1 | Set | |
| 682 | 192 | Supply, Erection, Testing and Commisioning of Chlorination Dosing System,complete with constant flow metering dosing pump with electronic low voltage circuit with 220 V -48 V transformer, aluminium housing with epoxy anti-acid varnish protection and anodized aluninium dial, with transparent polycarbonate lid, IP-54 protection capable of 15 l/hr @ 5 kg/cm2 with 100 litres capacity solution preparation cylindrical vertical tank with external scale with suitable manual agitators for easy installation in the tanks, pipe fittings, valves, supports etc. complete in all respects. | |||
| 683 | 192.01 | Dosing pump | 1 | Set | |
| 684 | 192.02 | Solution preparation tank with stirring rod | 1 | Set | |
| 685 | 193 | Designing, manufacturing, supplying, fixing in position, testing and commissioning of Switch Board, front operated cubicle type, front access 2mm thick steel enclosed free standing, dust and\nvermin proof with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and powder coating suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 MVA symmetrical at 415 volts.\nAll switchboards shall have provision for entry of cables from the top.\nAll live accessible parts shall be shrouded and all equipment shall be finger touch proof. The Busbars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports\nshall be used. Padlocking facility shall be provided on all outgoing feeders doors and switch handles shall be lockable in OFF position.\nThe short circuit rating for MCCB's shall be Ics values \nAn approval shall be taken for each panel before manufacturing. Galvanised hardwares with zinc passivation shall be used in fabrication of boards.\nThe Switch Board will comprise of the following :\nINCOMER: \n1 no 100 A 35 KA 4P MCCB with overcurrent , short circuit protection, thermal - magnetic release \nINDICATING PANEL\nThe incomers shall have the following :\n3 nos cast resin current transformers of 400/5 ratio Class 1.0 for metering\n1 no ammeter of 96 mm sq scaled 0-630 amps with 3 way and OFF selector switch\n1 no voltmeter of 96 mm sq scaled 0- 500 volts with 3 way & OFF selector switch\n1 set of LED indicating lamps - RED / YELLOW / BLUE\nRed / Green / Amber ON/OFF/TRIP indicating lamps (LED type)\nBUSBAR\nElectrolytic high conductivity aluminium three phase and neutral busbars rated at 125 amps having a maximum current density of 0.8 amp per sq mm suitable to with stand symmetrical fault\nlevel of 25 MVA at 415 volts. The neutral busbar is to be of 100% capacity\nOUT GOING \n6 Nos. 32 Amp, 415 Volts TP MPCB 15 KA having overload and short circuit and earth fault protection with Auto Star Delta Starter for Re-circulation pumps for 10 HP each pump.\n3 Nos. TP MPCB 10 KA having overload and short circuit protection with 0.5 HP DOL Starter. (For single phase Dosing Pumps). \n4 nos. 25A TPN MCCB with overload, earth fault and short circuit protection with ON/OFF/TRIP indication lamps\n3 nos. 16 A DP MCB as outgoing with incomer of 25 A TPN MCCB for single phase load Each DOL Starter shall have\nOn-OFF Push Button / ON -OFF -TRIP Indication Lamp, thermal O/L Type Relay, Contactor etc. as required\nA / M / OFF Selector Switch. \n3 way Single Phase Preventor for motor starter\nC. T. operated / Direct Digital Ampere Meter.\nSpare NO-NC contacts for each starter | 1 | Set | |
| 686 | 194 | Providing and laying G.I. strip on in trench for earth connections. Item includes anticorrosive painting at jonts, welding, nut, bolts, excavation, backfilling, levelling, compaction including all civil works as required. | |||
| 687 | 194.01 | 25 mm X 5 mm | 50 | Meter | |
| 688 | 195 | PIPING AND VALVES | |||
| 689 | 196 | Providing and fixing UPVC pipes class 10 kgf/cm2 (Class 5) as per I.S:4985 including all fittings,bends, junctions, offsets, steel flange, blinf flane, sockets, PVC pipe clips/ holders etc. and jointing with ruber rings and cement solvent complete provision for making flange joints with Stubend ,wherever required, as per manufacturer's specifications, including cutting holes in walls and floors, structural supports wherever required (as per disgn drawing) and making good the same, complete as directed by the Engineers-In-charge and as per approved specifications. PVC pipe (for swimming pool plant room - recirculation, overflow, drain , return inlet and pump suction and discharge header) | 1 | Lot | |
| 690 | 197 | Providing & fixing Sluice valve (double flanged) of CI body and brass non-rising type sprindle for PN 1.6 rating, conforming to IS:14846 including flange, gasket, nuts and bolts etc. complete in all respects. | |||
| 691 | 197.01 | 150 mm dia. | 1 | Each | |
| 692 | 197.02 | 200mm dia. | 1 | Each | |
| 693 | 197.03 | 250mm dia. | 1 | Each | |
| 694 | 198 | Providing & fixing Butterfly valve with C.I. body & disc, stainless steel/carbon steel shaft, Hand lever operated, PN 1.6 rating, conforming to IS:13095/BS:5155. including flange, gaskets, nuts and bolts complete in all respects. | |||
| 695 | 198.01 | 80mm dia | 1 | Each | |
| 696 | 198.02 | 150mm dia | 11 | Each | |
| 697 | 199 | Providing & fixing Non return valve (double flanged) of CI body for PN 1.6 rating, conforming to IS:5312 including flange, gasket, nuts and bolts etc. complete in all respects. | |||
| 698 | 199.01 | 150 mm dia | 4 | Each | |
| 699 | 199.02 | 200 mm dia | 1 | Each | |
| 700 | 199.03 | 250 mm dia | 1 | Each | |
| 701 | 200 | Providing and fixing forged brass ball valve having stainless steel / brass ball tested to 20 kg/cm2 complete as required and as specified complete as per directions of the engineer-in-charge. | |||
| 702 | 200.01 | 15mm dia. for sampling | 2 | Each | |
| 703 | 201 | Providing and fixing heavy duty brass / Gunmetal float valve including all required accessories complete in all respect as per direction of the engineer -in-charge . | |||
| 704 | 201.01 | 80mm dia | 1 | Each | |
| 705 | 202 | Supply of Test Kit for residual chlorine and pH complete in all respect as per directions of Engineer In charge | 2 | Set | |
| 706 | 203 | Supply of Combo pack with 10 kgs each TCCA, Alginex and Test kit complete in all respect as per directions of Engineer In charge | 4 | Set | |
| 707 | 204 | Supply of Alum complete in all respect as per directions of Engineer In charge | 100 | Kg | |
| 708 | 205 | Supply of Bleaching powder complete in all respect as per directions of Engineer In charge | 500 | Kg | |
| 709 | 206 | Supply of Dry Acid complete in all respect as per directions of Engineer In charge | 100 | Kg | |
| 710 | 207 | Sump Pumps for Lifting Water from Pump Room \nProviding and fixing compact monoblock dry motor submersible pumps for suitable rating, with non-clog free flow open impeller, suitable for operation on 220/400 volts + 10% -15% minimum solid handling capacity of 46mm suitable for operation on 240 volts + 5% -15%, 50 C/s A.C\nsingle phase supply, speed 960/1440 RPM including oil chamber, guide wire for lifting & lowering of pump, M.S. galvanized lifting chain, duck foot bend with following specifications:\nThe above pump sets must be supplied completewith following accessories. \nComplete piping 100mm dia common delivery upto outside the sump. (The pipe shall be heavy duty G.I) -- 1 Set.\n80mm dia butterfly valve.-- 2 Nos.\n80 mm dia reflux valve.-- 2 Nos.\nNecessary cables from pump set to control panel (position of panel marked in enclosed layout in plant room).-- 1 Set.\nElectrical panel (Two nos. IP-52 and one no. weather proof panel ) having all necessary accessories & safety devices of standard specifications. (Panels with sump pumps near each sump as per site conditions). --1 No.\n Automatic built-up water level controller with necessary length of cable upto control panel.\nNo. of Pumps : 2 nos (1 working + 1 stand by) \n Discharge - 250 LPM Each\nTotal head - 12 m\ncomplete in all respect as per the direction engineer in charge\n | 3 | Set | |
| 711 | 208 | Domestic Water Pump (Re Lift System)\nProviding and fixing vertical, inline multistage centrifugal pumping set with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel shaft as per IEC standards and GJL250 cast iron suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900 RPM, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply complete with all standard accessories including pressure switch, pressure gauges on discharge, isolating valves at suction and discharge, flexible joint on suction and delivery side, Y-Strainer on suction side,Non - return valve on delivery side with nuts, bolts & washer including mild steel flanges, where ever required with vibration elimination pads etc. base frame, nuts and bolts and necessary RCC foundations as per requirement as per instructions and Electric control panel and necessary outgoping power and control cables etc:\nNo. of Pumps : 2 (1 Working + 1 Stand by)\nCapacity : app. 200 LPM each \nHead : 20 M \n (complete set as mentioned above) | 1 | Set | |
| 712 | 209 | Domestic water distribution pump (Mezzanine floor)\nProviding, fixing and commissioning suitable complete composite hydropneumatic system consisting of horizontal / vertical multistage centrifugal pump having stainless steel (SS 304) impellers, shaft (SS-316) and housing, with single mechanical seal and pressurised tank of 100 liters capacity, complete with all standard accessories including pressure switch, pressure gauges, isolating valves , flexible joints on suction side and isolation valve , Non -return valve & flexible joints on delivery side with nuts, bolts & washer including mild steel flanges, where ever required with 3 mm thick rubber insertion, with necessary protection and operational devices i.e alternate pumping operation and shut-off during dry running conditions etc. with suitable electrical motor to be operated on 210/220 OR 400/440 volt 50 cycle AC supply, suitable for following duty and with total no. of pumps - 2 nos.(1 working+1standby) complete with Control Unit Panel, manifolds & chassis, as per the approval of Project-incharge complete with base frame, nuts, bolts and washer, necessary RCC foundation as per requirement, Electrical control panel with necessary outgoing power and control cables as required\nNo. of Pumps/Set : 2 ( 1 Working + 1 Stand by )\nCapacity : app. 100LPM per pump \nHead : app. 20 M \n(Make: Grundfoss Model: CM 5-4 or equivalent as per makes of material in Technical Specification)\ncomplete in all respect as per the direction engineer in charge | 1 | Set | |
| 713 | 210 | COOLING WATER SYSTEM FOR 500 LPH \nSupply, Installation, Testing and Commissioning of Water Chiller System complete in all respects having following technical & operational Parameters, for cooled water production :- \nA) Flow rate of outlet cooled water : 500 LPH \nB) Cooling Capacity : 10 TR \nC) Refrigerant = R 22 \nD) Power = 3 Ph/440 V / 50 Hz\nE) MOC : MS Powder Coated\nF) Pump = 500 LPH\nG) Storage Tank Capcity = 200 Ltr.\nH) Water Temprature Inlet = 35 +_ 5 C\nI) Outlet Temprature = 18 +_ 3 C\ncomplete in all respect as per the direction engineer in charge | 1 | Set | |
| 714 | 211 | Installation testing and commissioning of 500LPH RO water system already supplied at site. This include construction of pedestal for RO Water frame fixing. Also any material in shortfall or damaged are included in scope of supply. Any modification / rectifcation in the system if required shall be in the scope of contractor. Items like SS pipe, PVC tank, bends, UPVC pipe, wires, lugs, glands, cable tie and other accessories as required is also included in scope \ncomplete in all respect as per the direction engineer in charge | 1 | Each | |
| 715 | 212 | Solar Water Heater \nDesign, supply, installation testing commissioning of 1000LPD solar water heater. System comprise of Evacuated tube heat collector, 2 nos.circulating motor-pump set (1W+1S), NRV, Strainer, isolation valves, cross flow heat exchanger, 1000 ltr. SS Tank with electric heating element, inlet and drain tap, GI piping for hot water , Makeup tank with float valve, HPDE pipe for filling line, thermal insulation and cladding of water tank and pipeline, temperature gauge at tank, pipelines (inlet and outlet) and pressure gauge (at suction and discharge of pump), temperature transmitter, Motor and Electric heater control panel with timer, temperature monitor, controller, outgoint power and control cables etc. complete in all respect. Item also includes civil and structural work for equipment. | 1 | Set | |
| 716 | 213 | IBMS system | |||
| 717 | 214 | DDC PANELS: | |||
| 718 | 214.01 | Supply of DDC panels with all required DDC related items (accessories) such as, ontrollers, I/O interfacing cards, terminal base, MCB, Terminal blocks, Relay etc. inside the DDC panels with complete internal wiring. | 37 | Set | |
| 719 | 214.02 | Installation of DDC panels.\nInstallation of all required DDC related items (accessories) such as, terminal base, MCB, Terminal blocks, Relay etc. inside the DDC panels with complete internal wiring.\nInstallation of all required DDC related electronic cards such as, controllers, I/O interfacing cards etc. inside the DDC panels. \nChecking, Correction / modification of Installation of all required DDC related items (accessories) such as, terminal base, MCB, Terminal blocks, Relay etc. inside the DDC panels with complete internal wiring. \nNote: The details of the quantities mentioned in LOT shall be as per final detailed engineering drawings prepared by contractor based on technical specification of IBMS and actual site condition. | 1 | Lot | |
| 720 | 214.03 | Testing and commissioning of all DDC panels with all required DDC related items (accessories) such as, controllers, I/O interfacing cards, terminal base, MCB, Terminal blocks, Relay etc. inside the DDC panels with complete internal wiring.\nNote: The details of the quantities mentioned in LOT shall be as per final detailed engineering drawings prepared by contractor based on technical specification of IBMS and actual site condition. | 1 | Lot | |
| 721 | 215 | SENSORS AND FIELD DEVICES: | |||
| 722 | 216 | Supply of Immersion type temperature sensor | 6 | Nos. | |
| 723 | 216.01 | Installation of Immersion type temperature sensor | 24 | Nos. | |
| 724 | 216.02 | Testing and commisioning of Immersion type temperature sensor | 24 | Nos. | |
| 725 | 217 | Supply of Ultrasonic BTU Meter | 1 | Nos. | |
| 726 | 217.01 | Installation of Ultrasonic BTU Meter | 1 | Nos. | |
| 727 | 217.02 | Testing and commisioning of Ultrasonic BTU Meter | 1 | Nos. | |
| 728 | 218 | Supply of Ultrasonic Water Flow Meter | 3 | Nos. | |
| 729 | 218.01 | Installation of Ultrasonic Water Flow Meter | 3 | Nos. | |
| 730 | 218.02 | Testing and commisioning of Ultrasonic Water Flow Meter | 3 | Nos. | |
| 731 | 219 | Installation of Outside T/RH | 1 | Nos. | |
| 732 | 219.01 | Testing and commisioning of Outside T/RH | 1 | Nos. | |
| 733 | 220 | Supply of Level switch | 50 | Nos. | |
| 734 | 220.01 | Installation of Level switch | 56 | Nos. | |
| 735 | 220.02 | Testing and commisioning of Level switch | 56 | Nos. | |
| 736 | 221 | Supply of DP switch Water | 36 | Nos. | |
| 737 | 221.01 | Installation of DP switch Water | 74 | Nos. | |
| 738 | 221.02 | Testing and commisioning of DP switch Water | 74 | Nos. | |
| 739 | 222 | Supply of DP Sensor Water | 7 | Nos. | |
| 740 | 222.01 | Installation of DP Sensor Water | 7 | Nos. | |
| 741 | 222.02 | Testing and commisioning of DP Sensor Water | 7 | Nos. | |
| 742 | 223 | Installation of DP Switch accross AHU / Air Washer Filter | 125 | Nos. | |
| 743 | 223.01 | Testing and commisioning of DP Switch accross AHU / Air Washer Filter | 126 | Nos. | |
| 744 | 224 | Supply of DP switch across Air/Blower for AHU, Air Washer & VF | 92 | Nos. | |
| 745 | 224.01 | Installation of DP switch across Air/Blower for AHU, Air Washer & VF | 163 | Nos. | |
| 746 | 224.02 | Testing and commisioning of DP switch across Air/Blower for AHU, Air Washer & VF | 164 | Nos. | |
| 747 | 225 | Installation of Duct type temperature /RH Sensor | 102 | Nos. | |
| 748 | 225.01 | Testing and commisioning of Duct type temperature /RH Sensor | 103 | Nos. | |
| 749 | 226 | Installation of Pressure sensor for Water | 6 | Nos. | |
| 750 | 226.01 | Testing and commisioning of Pressure sensor for Water | 6 | Nos. | |
| 751 | 227 | Supply of Flow Switch | 2 | Nos. | |
| 752 | 227.01 | Installation of Flow Switch | 2 | Nos. | |
| 753 | 227.02 | Testing and commisioning of Flow Switch | 2 | Nos. | |
| 754 | 228 | Installation of Duct Pressure Sensor | 102 | Nos. | |
| 755 | 228.01 | Testing and commisioning of Duct Pressure Sensor | 103 | Nos. | |
| 756 | 229 | Installation of CO Sensor | 1 | Nos. | |
| 757 | 229.01 | Testing and commisioning of CO Sensor | 1 | Nos. | |
| 758 | 230 | Supply of CO2 Sensor | 17 | Nos. | |
| 759 | 230.01 | Installation of CO2 Sensor | 102 | Nos. | |
| 760 | 230.02 | Testing and commisioning of CO2 Sensor | 103 | Nos. | |
| 761 | 231 | Supply of Hardness Analyser | 3 | Nos. | |
| 762 | 231.01 | Installation of Hardness Analyser | 3 | Nos. | |
| 763 | 231.02 | Testing and commisioning of Hardness Analyser | 3 | Nos. | |
| 764 | 232 | Supply of PH Analyser | 3 | Nos. | |
| 765 | 232.01 | Installation of PH Analyser | 3 | Nos. | |
| 766 | 232.02 | Testing and commisioning of PH Analyser | 3 | Nos. | |
| 767 | 233 | Supply of TDS Analyser | 3 | Nos. | |
| 768 | 233.01 | Installation of TDS Analyser | 3 | Nos. | |
| 769 | 233.02 | Testing and commisioning of TDS Analyser | 3 | Nos. | |
| 770 | 234 | Supply of hydrostatic level controller for measurement of liqiuid in tank/ vessels (immerisible type) made of Stainless Steel for installation in storage tanks, and capable of providing 4 to 20 mA analog signal ouput | 9 | Nos. | |
| 771 | 234.01 | Installation of hydrostatic level controller for measurement of liqiuid in tank/ vessels (immerisible type) made of Stainless Steel for installation in storage tanks, and capable of providing 4 to 20 mA analog signal ouput | 9 | Nos. | |
| 772 | 234.02 | Testing and commissioning of hydrostatic level controller for measurement of liqiuid in tank/ vessels (immerisible type) made of Stainless Steel for installation in storage tanks, and capable of providing 4 to 20 mA analog signal ouput | 9 | Nos. | |
| 773 | 235 | Supply of Orifice plate & DP type flow transmitters for CHW flow measurement | 3 | Nos. | |
| 774 | 235.01 | Installation of Orifice plate & DP type flow transmitters for CHW flow measurement | 3 | Nos. | |
| 775 | 235.02 | Testing & commissioning of Orifice plate & DP type flow transmitters for CHW flow measurement | 3 | Nos. | |
| 776 | 236 | Supply of Orifice plate & DP type flow transmitters for Condensor outlet flow measurement | 3 | Nos. | |
| 777 | 236.01 | Installation of Orifice plate & DP type flow transmitters for Condensor outlet flow measurement | 3 | Nos. | |
| 778 | 236.02 | Testing & commissioning of Orifice plate & DP type flow transmitters for Condensor outlet flow measurement | 3 | Nos. | |
| 779 | 237 | Supply of Duct type temperature Sensor for AHU outlet air duct | 60 | Nos. | |
| 780 | 237.01 | Installation of Duct type temperature Sensor for AHU outlet air duct | 103 | Nos. | |
| 781 | 237.02 | Testing & commissioning of Duct type temperature Sensor for AHU outlet air duct | 103 | Nos. | |
| 782 | 238 | Supply of Velocity sensor for AHU outlet air flow measurement | 103 | Nos. | |
| 783 | 238.01 | Installation of Velocity sensor for AHU outlet air flow measurement | 103 | Nos. | |
| 784 | 238.02 | Testing & commissioning of Velocity sensor for AHU outlet air flow measurement | 103 | Nos. | |
| 785 | 239 | INTEGRATION UNIT & FIELD LAYER:\n Note: The details of the quantities mentioned in LOT shall be as per final detailed engineering drawings prepared by contractor based on technical specification of IBMS and actual site condition. | |||
| 786 | 239.01 | For 3 nos. Chillers Interface on BACnet /IP (software) (30 I/O's per Chiller = 90 points) | 1 | Lot | |
| 787 | 239.02 | Integration of CCTV through Modbus/Bacnet/OPC Protocols. | 1 | Lot | |
| 788 | 239.03 | For 1 no FAS control Panel on BACnet /IP or Modbus (2000 Detectors) | 1 | Lot | |
| 789 | 239.04 | For 25 nos. Lift interface on Modbus RTU. (16 I/O's per Lift = 400 points) | 1 | Lot | |
| 790 | 239.05 | Integration of RO plant through soft communication. | 1 | Lot | |
| 791 | 239.06 | For LT Electrical Panel & EM points (650 Points) | 1 | Lot | |
| 792 | 239.07 | Integration of Water meter through soft communication. | 1 | Lot | |
| 793 | 239.08 | Integration of Gas meter through soft communication. | 1 | Lot | |
| 794 | 239.09 | Integration of Solar water heater through soft communication. | 1 | Lot | |
| 795 | 239.1 | Integration of Battery management system through soft communication | 1 | Lot | |
| 796 | 239.11 | Integration of SCADA system through Modbus/Bacnet/OPC Protocols | 1 | Lot | |
| 797 | 239.12 | Integration of VRF through soft communication. | 1 | Lot | |
| 798 | 239.13 | For 300 nos. VAV Controllers on Modbus RTU/BACnet (10 I/O's per Controller = 3000 points) | 1 | Lot | |
| 799 | 239.14 | For AHU VFD Integration (1150 Points) | 1 | Lot | |
| 800 | 239.15 | Integration of Access Control System through Modbus/Bacnet/OPC Protocols | 1 | Lot | |
| 801 | 239.16 | Integration of Water tanks & Pumps contol panel through Modbus/Bacnet/OPC Protocols. | 1 | Lot | |
| 802 | 239.17 | Variable Pumping system, Pump VFD | 1 | Lot | |
| 803 | 240 | BMS PC & SOFTWARES: | |||
| 804 | 240.01 | Supply of BMS Server System with all required hardwares & softwares and Laserjet colour A4 printer along with all hardwares & accessories in Plant Room | 1 | Set | |
| 805 | 240.02 | Installation of BMS Server System with all required hardwares & softwares and Laserjet colour A4 printer along with all hardwares & accessories in Plant Room | 1 | Set | |
| 806 | 240.03 | Testing and commisioning of BMS Server System with all required hardwares & softwares and Laserjet colour A4 printer along with all hardwares & accessories in Plant Room | 1 | Set | |
| 807 | 240.04 | Supply of BMS Computer System (Work Station) in POD 3 & Plant Room with all required hardwares & softwares and Laserjet colour A4 printer along with all hardwares & accessories. | 1 | Set | |
| 808 | 240.05 | Installation of BMS Computer System (Work Station) in POD 3 & Plant Room with all required hardwares & softwares and Laserjet colour A4 printer along with all hardwares & accessories. | 1 | Set | |
| 809 | 240.06 | Testing and commisioning of BMS Computer System (Work Station) in POD 3 & Plant Room with all required hardwares & softwares and Laserjet colour A4 printer along with all hardwares & accessories. | 1 | Set | |
| 810 | 240.07 | Supply of BMS System Software: SITC of the unlimited multi user with simultaneous minimum 5 user web based Server Software for Building Management System with dynamic graphics. The software shall have unlimited number of user license with minimum up 5\nsimultaneous users. | 1 | Nos. | |
| 811 | 240.08 | Installation of BMS System Software: SITC of the unlimited multi user with simultaneous minimum 5 user web based Server Software for Building Management System with dynamic graphics. The software shall have unlimited number of user license with minimum up 5\nsimultaneous users. | 1 | Nos. | |
| 812 | 240.09 | Testing and commisioning of BMS System Software: SITC of the unlimited multi user with simultaneous minimum 5 user web based Server Software for Building Management System with dynamic graphics. The software shall have unlimited number of user license with minimum up 5\nsimultaneous users. | 1 | Nos. | |
| 813 | 241 | Supply, Installation, testing and commisioning of Web Based Energy Management & Reporting Tool software for Monitoring Building efficiency and store the data into separate application database (SQL server) for analysis. \nNote: The details of the quantities mentioned in LOT shall be as per final detailed engineering drawings prepared by contractor based on technical specification of IBMS and actual site condition. | 1 | Lot | |
| 814 | 242 | Supply, installation, testing and commisioning of Network components (Network switches, CAT6 patch cords, FO patch cords, IO boxes, LIUs etc) for interconnection of all DDC panels and BMS PCs.\nNote: The details of the quantities mentioned in LOT shall be as per final detailed engineering drawings prepared by contractor based on technical specification of IBMS and actual site condition. | 1 | Lot | |
| 815 | 243 | Supply, installation, testing and commisioning of 2 KVA ON-LINE UPS with 15 minutes battery back up for DDC & PCs. | 1 | Lot | |
| 816 | 244 | CABLES:\nNote: The details of the quantities mentioned in LOT shall be as per final detailed engineering drawings prepared by contractor based on technical specification of IBMS and actual site condition. | |||
| 817 | 244.01 | Supplying of 2 / 4 / 6 / 8 Core 1.0 Sqmm, unarmoured ATC conductor multistranded, Un-shielded cable and 2 Core 1.0 Sqmm, unarmoured ATC conductor multistranded, Shielded cable with 20/25 mm PVC conduit and other accessiories. | 1 | Lot | |
| 818 | 244.02 | Installation of 2 / 4 / 6 / 8 Core 1.0 Sqmm, unarmoured ATC conductor multistranded, Un-shielded cable and 2 Core 1.0 Sqmm, unarmoured ATC conductor multistranded, Shielded cable with 20/25 mm PVC conduit and other accessiories. | 1 | Lot | |
| 819 | 244.03 | Testing & commissioning of 2 / 4 / 6 / 8 Core 1.0 Sqmm, unarmoured ATC conductor multistranded, Un-shielded cable and 2 Core 1.0 Sqmm, unarmoured ATC conductor multistranded, Shielded cable with 20/25 mm PVC conduit and other accessiories. | 1 | Lot | |
| 820 | 244.04 | Supply, installation, testing and commissioning of 3 Core 1.5 Sqmm, unarmoured ATC conductor multistranded, cable for Powering DDC , Actuators, BMS PC etc. with PVC conduit and power socket (as applicable). | 1 | Lot | |
| 821 | 244.05 | Supplying, installing, testing and commissioning of CAT6 UTP Cable Box (305m) with PVC conduit. | 1 | Lot | |
| 822 | 245 | IT System | |||
| 823 | 246.01 | Supply, Installation, Testing & commissioning of 15U (W 600mm / D 500mm) Wall mountable Rack with front glass door.\nAccessories of rack \nFan Housing Unit with 4 fans \nCable manager 1U Horizontal x 4 \nAC main Channel 06 points 5 Amp (PDU) \nMounting Hardware (Pack of 10) | 3 | Nos. | |
| 824 | 246.02 | Supply, Installation, Testing & commissioning of 12 Port LIU (fiber optic interconnecting unit) Rack Mount 19\" housing Fully Loaded with front modules with blank adapter panel, pigtails. | 3 | Nos. | |
| 825 | 246.03 | Laying, Termination (Splicing) & testing of Optical fiber cable. | 3 | Nos. | |
| 826 | 247.01 | Supply of Unshielded Twisted Pair CAT6 (as per EIA/TIA Standards) Cable Box of 305 Meter with star filler | 8 | Nos. | |
| 827 | 247.02 | Terminations, lebelling and testing of CAT6 Cable along with supply and installation of face plates and CAT 6 RJ45I/O | 58 | Nos. | |
| 828 | 247.03 | Terminations, lebelling and testing of CAT6 Cable along with supply and installation ofCAT6 RJ45 I/O (in a Surface Mount Box). | 4 | Nos. | |
| 829 | 247.04 | Supply of Patch cords (2m) CAT6 (with moulded boots) | 62 | Nos. | |
| 830 | 248.01 | Supply of Unshielded Twisted Pair CAT6 (as per EIA/TIA Standards) Cable Box of 305 Meter with star filler | 7 | Nos. | |
| 831 | 248.02 | Supply, Installation, Testing & commissioning of 24U (W 600mm / D 800mm) Close rack 19\" Floor mount : (For LV Room)\nFront Door S12C 19\" / 24U\nFront Door S12C 19\" / 24U\nSide Panels S12C 24U / 800mmD\nAC Mains Channel (10 Points of 5/15 AMP sockets - (Vertical)\nAC Distribution Box + H/W (5 Points of 5/15 AMP sockets - (Horzitontal)\n19\" 1U Cable Manager PVC with duct fingers x 5\nFan housing unit 4 Fan POSN\nFans 90 CFM 230 VAC\nFans 90 CFM 230 VAC\nCastor Set Normal/ Brake\nBar, Earthing 24U\nMounting Hardware (Pack of 10) x 5 | 1 | Nos. | |
| 832 | 248.03 | Supply, Installation, Testing & commissioning of 24 Port LIU (fiber optic interconnecting unit) Rack Mount 19\" housing Fully Loaded with front modules with blank adapter panel, pigtails. | 1 | Nos. | |
| 833 | 248.04 | Supply of 24 Port Patch panels CAT6 (1U with rear wire manager) 45°silver-plated IDCs (insulation displacement connection) for secure, reliable gas-tight connections | 2 | Nos. | |
| 834 | 248.05 | Terminations, lebelling and testing of CAT6 Cable along with supply and installation of face plates and CAT 6 RJ45I/O | 39 | Nos. | |
| 835 | 248.06 | Supply of Patch cords (1m) CAT6 (with moulded boots) | 39 | Nos. | |
| 836 | 248.07 | Supply of Patch cords (2m) CAT6 (with moulded boots) | 39 | Nos. | |
| 837 | 248.08 | Laying, Termination (Splicing) & testing of Optical fiber cable. | 1 | Set | |
| 838 | 249.01 | Supply of Unshielded Twisted Pair CAT6 (as per EIA/TIA Standards) Cable Box of 305 Meter with star filler | 1 | Nos. | |
| 839 | 249.02 | Supply and installation of AC Mains Channel (10 Points of 5/15 AMP sockets - (Vertical) | 1 | Nos. | |
| 840 | 249.03 | Supply and installation of AC Distribution Box + H/W (5 Points of 5/15 AMP sockets - (Horzitontal) | 1 | Nos. | |
| 841 | 249.04 | Supply of 24 Port Patch panels CAT6 (1U with rear wire manager) 45°silver-plated IDCs (insulation displacement connection) for secure, reliable gas-tight connections | 1 | Nos. | |
| 842 | 249.05 | Terminations, lebelling and testing of CAT6 Cable along with supply and installation of face plates and CAT 6 RJ45I/O | 4 | Nos. | |
| 843 | 249.06 | Supply of Patch cords (2m) CAT6 (with moulded boots) | 4 | Nos. | |
| 844 | 249.07 | Laying, Termination (Splicing) & testing of Optical fiber cable. | 1 | Set | |
| 845 | 249.08 | Supply of tools and tackles as per the list enclosed Volume-II technical specification Chapter -9 IT works,Clause-6 (Annexure-B5) | 1 | Lot | |
| 846 | 250 | High Velocity Water Spray System Works | |||
| 847 | 251 | Design, supply, (including transportation, storage, handling) installation testing and commissioning of Fixed High Velocity Water Spray System for Fire Protection of 02 Nos. 6.3 MVA OLTC Power Transformers confirming to I.S: 3034 1993/2002. | |||
| 848 | 251.01 | Electrical driven pump 900 lpm @ 88 MWC set (22 KW) | 2 | Nos. | |
| 849 | 251.02 | MS pipe (DN 200) (IS 1239 Part - 1) | 20 | Meter | |
| 850 | 251.03 | Gate valves (DN 200) | 2 | Nos. | |
| 851 | 251.04 | NRV (DN 200) | 1 | Nos. | |
| 852 | 251.05 | MS pipe (DN 100) (IS 1239 Part - 1) | 150 | Meter | |
| 853 | 251.06 | Deluge valve complete assembly (DN 100) | 2 | Nos. | |
| 854 | 251.07 | Gate valves | 6 | Nos. | |
| 855 | 251.08 | GI pipes (DN 25) | 160 | Meter | |
| 856 | 251.09 | GI pipes (DN 50) | 120 | Meter | |
| 857 | 251.1 | Pressure gauge | 4 | Nos. | |
| 858 | 251.11 | Pressure switch | 4 | Nos. | |
| 859 | 251.12 | Y-type strainer | 2 | Nos. | |
| 860 | 251.13 | Quartzoid bulb detectors | 50 | Nos. | |
| 861 | 251.14 | HVWS sprayers | 50 | Nos. | |
| 862 | 251.15 | Basket strainer | 1 | Nos. | |
| 863 | 252 | HVAC Works | |||
| 864 | 253 | Water Cooled Centrifugal Chiller\nTesting & Commissioning of centrifugal water chilling machine each having a capacity of 18,14,400 K.CAL/hour (600 TR) at chilled water inlet/ outlet temperature of 54 deg.F / 44 deg.F with chilled water circulation rate of 5450 LPM(1440 GPM) (nominal) and condenser water inlet /outlet temperature of 87deg.F/ 97deg.F with circulation rate of 6810 LPM (1800 GPM)(nominal) suitable for operation on refrigerant 134a | 3 | Nos. | |
| 865 | 253.01 | Supply & charging Of Refrigerent R-134a for balance 2 nos chiller | 2 | Nos. | |
| 866 | 254 | Cooling Tower (CTI CERTIFIED) | |||
| 867 | 254.01 | Testing and commissioning of CTI Certified Induced Draft FRP Cooling tower of 22,68,000 Kcal/hr heat rejection capicity with FRP Water basin | 3 | Nos. | |
| 868 | 255 | Condenser Water Pumps: | |||
| 869 | 255.01 | Testing and commissioning of condenser water pump set capable of delivering 6810 LPM of water against 25 mtr head | 3 | Nos. | |
| 870 | 256 | Primary Chilled Water Pumps: | |||
| 871 | 256.01 | Testing and commissioning of chilled water Primary pump set capable of delivering 5450 LPM of water against a head of 15 mtr. | 3 | Nos. | |
| 872 | 257 | Secondary Chilled Water Pumps: | |||
| 873 | 257.01 | Testing and commissioning of chilled water Secondary pump set capable of delivering 5016 LPM of water against a head of 50 mtr. including rectification of transformer in secondary pump VFD panel. | 3 | Nos. | |
| 874 | 257.02 | Installation Testing & Commissionning of Submersible pumps with Starter Panel for Tunnel. | 2 | Nos. | |
| 875 | 258 | Inline Exhaust Fan (Ducted) for toilet ventilation | |||
| 876 | 258.01 | Testing & Commissioning of Ceiling suspended inline centrifugal fan in galvanized/steel casing, with fastening brackets including flexible connections to connect fan with GI duct of 350 dia. at outlet and inlet.Airflow Capacity: 600 CFM, Static Pressure: 15 mm | 1 | Nos. | |
| 877 | 259 | Fire Rated Vane Axial Flow Fans for Plant Room Ventilation | |||
| 878 | 259.01 | Testing and commissioning of Vane Axial flow fan as per the specifications enclosed. The fans should be AMCA certified for air performance and the fan should be selected for maximum efficiency. The fan should be rated for a minimum of 150 ºC for a minimum of 2 Hrs. application. The fan Motor shall be of efficiency class IE3 or EFF1 whichever is more efficient.For Plant Room Ventilation - A, Max. Noise Level: 75 db @ 3 mtrirflow Capacity: 12,680 CFM, Static Pressure: 25 mm, Size: 800 mm | 7 | Nos. | |
| 879 | 259.02 | Testing and commissioning of Vane Axial flow fan as per the specifications enclosed. The fans should be AMCA certified for air performance and the fan should be selected for maximum efficiency. The fan should be rated for a minimum of 150 ºC for a minimum of 2 Hrs. application. The fan Motor shall be of efficiency class IE3 or EFF1 whichever is more efficient- For Electrical Panel Room Ventilation - Airflow Capacity: 6,180 CFM, Static Pressure: 25 mm, Size: 630 mm, Max. Noise Level: 75 db @ 3 mtr | 1 | Nos. | |
| 880 | 260 | Fire Rated Vane Axial Flow Fans for Plant Room Ventilation | |||
| 881 | 260.01 | Installation Testing and commissioning of Vane Axial flow fan as per the specifications enclosed. The fans should be AMCA certified for air performance and the fan should be selected for maximum efficiency. The fan should be rated for a minimum of 150 ºC for a minimum of 2 Hrs. application. The fan Motor shall be of efficiency class IE3 or EFF1 whichever is more efficient.For Plant Room Ventilation - A, Max. Noise Level: 75 db @ 3 mtrirflow Capacity: 12,680 CFM, Static Pressure: 25 mm, Size: 800 mm | 1 | Nos. | |
| 882 | 261 | Fire Rated Vane Axial Flow Fans for Plant Room Ventilation | |||
| 883 | 261.01 | Supply Installation Testing and commissioning of Vane Axial flow fan as per the specifications enclosed. The fans should be AMCA certified for air performance and the fan should be selected for maximum efficiency. The fan should be rated for a minimum of 150 ºC for a minimum of 2 Hrs. application. The fan Motor shall be of efficiency class IE3 or EFF1 whichever is more efficient.For Basement Water Treatment Plant Room Ventilation - Airflow Capacity: 4000 CFM, Static Pressure: 25 mm, Size: 500 mm, Max. Noise Level: 75 db @ 3 mtr. | 1 | Nos. | |
| 884 | 262 | Split AC Units for BMS Room | |||
| 885 | 262.01 | Installing, testing and commissioning of 5 - star efficiency class rated AIR COOLED HI-WALL SPLIT AIR CONDITIONING UNITS with R-407C / R-410A/R-22 refrigerant as described in specifications. The unit shall be complete with cabinet type fan coil unit and external condensing unit, complete in all respects, inclusive of copper refrigerant piping, GI condensate drain piping, valves and insulation. Quoted price shall include cost of wireless remote controller, cooling thermostat, wiring, control cooling and earthing. Unit shall be provided with auto timer setting. The unit capacities shall be :2.0 TR | 2 | Nos. | |
| 886 | 263 | PLC for Auto sequencing of Split Acs | |||
| 887 | 263.01 | Supply, Installation, Testing and Commissioning of PLC for Auto Sequencing of Split units with microprocessor based controller along with enclosure/ accessories having facility for configuratuion of the same as per requirement for sequenced Start/Stop for following split units :Two number split units including one standby for (Server Room & BMS/ Fire Control Room/LV Room ) | 1 | Nos. | |
| 888 | 264 | Expansion Tank | |||
| 889 | 264.01 | Testing and commissioning of the following capacities CS Closed Expansion tank with full acceptance Factor and shall be ASME rated/European standard code no. 97/23/EC pre-charged bladder-type pressure vessels. The tank shall be designed to absorb the expansion forces of heating/cooling system water while maintaining proper system pressurization under varying operating conditions. The heavy duty bladder should contain system water thereby eliminating tank corrosion and water logging problems. The system should include PRV and Airvent also. And complete as per technical specification - Capacity : 1500 Litre | 1 | Nos. | |
| 890 | 265 | Air Separator | |||
| 891 | 265.01 | Testing & Commissioning as shown on plans, a centrifugal type air separator for following pipe size. The unit shall inlet and outlet connections tangential to the vessel shell. The unit shall have an internal stainless steel collector tube with 5/32” (4mm) diameter perforations and 63% open area designed to direct accumulated air to the compression tank on an air control system or an air vent on an air elimination via an NPT vent connection at top of the unit.Size : 300 mm dia | 1 | Nos. | |
| 892 | 266 | Pressurising Unit | |||
| 893 | 266.01 | Testing and commissioning of Pressurizing unit consisting of Inline vertical multistage, centrifugal clear water pumps ( 1W+1S) with S.S. 304 casing, S.S. 304 impeller and S.S. 316 shaft, CI Base,TEFC motor (with mechanical seal) with control panel and Set of accessories such as pressure switches, suction and discharge pipe manifolds, pressure gauges, valves etc. conforming to the specifications.Control Panel -Set of accessories such as pressure switches, suction and discharge pipe manifolds, pressure gauges, valves etc. | 1 | Nos. | |
| 894 | 267 | Refrigerant Recovery System | |||
| 895 | 267.01 | Balance Supply Material , Installing, Testing and commissioning of refrigerant recovery system consisting of refrigerant compressor, watercooled condenser, horizontal refrigerant storage tank with sight glass and relief valve, filter drier, necessary valves, controls and hoses to remove, replace and distill refrigerant. And complete as per technical specification. 400 Kg | 1 | Nos. | |
| 896 | 268 | HVAC Electrical Panels ( 3 nos. VFD panel for chiller ). | |||
| 897 | 268.01 | Testing and commissioning of HVAC panels fabricated out of 2mm thick for structural members (Load bearing members) and 1.6mm thick for door and covers (Non load bearing members) CRCA sheet in cubicle compartmentalize free standing floor mounted, dust and vermin proof with reinforcement of suitable size angle iron, channel 'T' irons and / or flats wherever necessary, 16 gauge CRCA sheet steel shall be used for final distribution panels. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of zinc chromate primer and final approved shade of enamelled paint. 2 Nos. earthing terminals shall be provided for all distribution panels. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system and with 15% spare space, lifting hooks shall also be provided in case of large panels. Degree of ingress protection of IP 43 for Indoor and IP-55 for Outdoor. | 1 | Lot | |
| 898 | 269 | Tube Axial Flow Fans along with starter panel: | |||
| 899 | 269.01 | Installation, testing and commissioning of Tube Axial flow fan as per the approved drawings and specifications. Starter panel installation, testing and commissioning is included. (For Lift well pressuristion) - Air Flow : 6300 CFM, St. Pressure : 25 mm WC, | 1 | Nos. | |
| 900 | 269.02 | Installation, testing and commissioning of Tube Axial flow fan as per the approved drawings and specifications. Starter panel installation, testing and commissioning is included. (For Lift well pressuristion) For Frieght Lift - Air Flow : 10200 CFM, St. Pressure : 25 mm WC | 1 | Nos. | |
| 901 | 270 | Cabinet Fans for Toilet exhaust with starter panel: | |||
| 902 | 270.01 | Installation, testing and commissioning of factory fabricated Double Skinned cabinet type fans section made out of extruded aluminium section with 1.0mm pre-plasticized / pre- coated Galvanised steel sheet with blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply with motor and belt drive package. Starter panel installation, testing and commissining is included. - Air Flow : 10,200 CFM, St. Pressure : 15 mm WC | 1 | Nos. | |
| 903 | 270.02 | Testing and commissioning of air handling units along with starter panel | 70 | Nos. | |
| 904 | 271 | Tube Axial Flow Fans with starter panel | |||
| 905 | 271.01 | Installation, testing and commissioning of Tube Axial flow fan as per the approved drawings and specifications.Starter panel installation, testing and commissining is included. (For Lift well pressuristion) - Air Flow : 5600 CFM, St. Pressure : 25 mm WC | 4 | Nos. | |
| 906 | 272 | Cabinet Fans for Toilet exhaust with starter panel: | |||
| 907 | 272.01 | Installation, testing and commissioning of factory fabricated Double Skinned cabinet type fans section made out of extruded aluminium section with 1.0mm pre-plasticized / pre- coated Galvanised steel sheet with blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply with motor and belt drive package. Starter panel installation, testing and commissioning is included -For Toilet exhaust, Air Flow : 7300 CFM, St. Pressure : 15 mm WC | 1 | Nos. | |
| 908 | 273 | Cabinet Fans for Toilet exhaust with starter panel : | |||
| 909 | 273.01 | Installation, testing and commissioning of factory fabricated Double Skinned cabinet type fans section made out of extruded aluminium section with 1.0mm pre-plasticized / pre- coated Galvanised steel sheet with blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply with motor and belt drive package. Starter panel installation, testing and commissining is included. - for Toilet exhaust, Air Flow : 9200 CFM, St. Pressure : 15 mm WC | 1 | Nos. | |
| 910 | 274 | VRV System (out door units) installation, testing and commissioning of VRV Air Conditioning outdoor Unit of below mentioned capacity complete with VRV compressor, air cooled condensor with propeller fan, controls, control panel, necessary accessories etc. Refrigerant piping not included.Design Room Temp.: 24 ºC, Refrigerant : R410 | |||
| 911 | 274.01 | System-1 : The outdoor unit need to be as per the required capacity to cater 3 nos of 8.14 TR IDUs on ambient temperature 41.1 deg C | 1 | Nos. | |
| 912 | 274.02 | System-2 & system-3 : The outdoor unit need to be as per the required capacity to cater 2 nos of 6.5 TR IDUs on ambient temperature 41.1 deg C , and the outdoor unit need to cater to 1 nos. treated fresh air unit of 8 TR. | 1 | Nos. | |
| 913 | 275 | Ceiling Suspended Ducted type VRF IDU - Installation, testing and commissioning of below mentioned capacities HIGH static In-ceiling indoor units complete with evaporator with coil having copper tube and aluminium fins as per manufacturer, fan with motor, thermostat, control panel with cordless remote. | |||
| 914 | 275.01 | 10HP (8.19 TR) | 3 | Nos. | |
| 915 | 275.02 | 8 HP (6.54 TR) | 2 | Nos. | |
| 916 | 276 | Double Skin Floor Mounted DX type Fresh Air Unit (AHU) | |||
| 917 | 276.01 | Installation Testing & Commissionning Of Double Skin DX type Air Handling Unit with 25 mm thick aluminum profile frame work & Centrifugal DIDW forward curve fan with TEFC sq. cage IP 55 Eff-1 motor with V-belt drive,vibration isolators, intake section, prefilters (10 mic), DX cooling coil, supply air section with outlet damper, etc as per enclosed technical specifications - Performance Parameter :Air flow : 1,200 CFM, Fan Static pressure : 50 mm WC, Est. Cooling Load : 8.0 TR | 1 | Nos. | |
| 918 | 277 | Air Washer: | |||
| 919 | 277.01 | Supply of balance material, Installation, testing and commissioning of cellulose pad type Horizontal/ Vertical air washer at 500 FPM velocity across pads, DIDW double skinned Class-I Backward curved centrifugal fan with TEFC weather proof motor of IP:55 protection suitable for 415 +10% Volts, 3 phase, 50 cycles power supply, mounted on a common base with metallistik vibration isolators, multi sheave pulleys for fan and fan motor.For Badminton/Tennis Court - Air Flow : 35000 CFM, St. Pressure : 50 mm WC | 2 | Nos. | |
| 920 | 277.02 | Supply of balance material, Installation, testing and commissioning of cellulose pad type Horizontal/ Vertical air washer at 500 FPM velocity across pads, DIDW double skinned Class-I Backward curved centrifugal fan with TEFC weather proof motor of IP:55 protection suitable for 415 +10% Volts, 3 phase, 50 cycles power supply, mounted on a common base with metallistik vibration isolators, multi sheave pulleys for fan and fan motor.For Badminton/Tennis Court - Air Flow : 15000 CFM, St. Pressure : 50 mm WC | 2 | Nos. | |
| 921 | 277.03 | Supply of balance material, Installation, testing and commissioning of cellulose pad type Horizontal/ Vertical air washer at 500 FPM velocity across pads, DIDW double skinned Class-I Backward curved centrifugal fan with TEFC weather proof motor of IP:55 protection suitable for 415 +10% Volts, 3 phase, 50 cycles power supply, mounted on a common base with metallistik vibration isolators, multi sheave pulleys for fan and fan motor.For Squash Court - Air Flow : 17000 CFM, St. Pressure : 50 mm WC | 1 | Nos. | |
| 922 | 278 | Tube Axial Flow Fans | |||
| 923 | 278.01 | Testing and commissioning of Tube Axial flow fan (For fresh air intake in squash area in case of fire) Air Flow : 25000 CFM, St. Pressure : 25 mm WC Noise Level : 85 db @ 3 mtr distance at room conditions | 2 | Nos. | |
| 924 | 279 | Vane Axial Flow Fans | |||
| 925 | 279.01 | Installation of balance ducting and accessories to make the system installation complete, testing and commissioning of Vane Axial flow fan (For Pump room in basement) - Air Flow : 5100 CFM, St. Pressure : 25 mm WC | 2 | Nos. | |
| 926 | 280 | Cabinet Fans for Exhaust: | |||
| 927 | 280.01 | Installation, testing and commissioning of factory fabricated Double Skinned cabinet type fans - For Badminton Court & Viewer's area, Air Flow : 25000 CFM, St. Pressure : 15 mm WC | 3 | Nos. | |
| 928 | 280.02 | Installation, testing and commissioning of factory fabricated Double Skinned cabinet type fans - For Squash Courts, Air Flow : 8500 CFM, St. Pressure : 15 mm WC | 2 | Nos. | |
| 929 | 280.03 | Installation, testing and commissioning of factory fabricated Double Skinned cabinet type fans - For Toilet, Air Flow : 5000 CFM, St. Pressure : 15 mm WC | 1 | Nos. | |
| 930 | 281 | Fire Rated Tube Axial Flow Fans | |||
| 931 | 281.01 | Installation of any left out material as per drawing. Testing and commissioning of Vane Axial flow fan as per the approved drawings and specifications. (For smoke exhaust from squash area in case of fire)- Air Flow : 8333 CFM, St. Pressure : 25 mm WC | 3 | Nos. | |
| 932 | 282 | Wall Mounted type Propeller Fans | |||
| 933 | 282.01 | Supply, Installation, Testing and Commissioning of wall mounted type propeller fans with fan motor to be energy efficient with efficiency level of IE3 or Eff-1 whichever is more efficient. (Complete in all respect as per enclosed technical specifications). Accessories required: - Wire guard at inlet and bird screen at outlet, Gravity operated louver shutters built into steel frame, Regulators for fan speed control., Selection parameters: - For Pantry & Electrical Room - Size : 315 mm dia, (Suitable for Handling upto 600 CFM) | 2 | Nos. | |
| 934 | 283 | Electrical Panels | |||
| 935 | 283.01 | Testing and commissioning of LT Panel/Sub-distribution panels - HVAC Panel-1: Pump Room Ventilation, Location: Pump Room, Basement. Cable tray laying, power and control cabling from the air washer panel and necessary cable termination for air washer fans and pumps to be considered in the scope of work. | 1 | Nos. | |
| 936 | 283.02 | Testing and commissioning of LT Panel/Sub-distribution panels -HVAC Panel: (AW-1 : Squash Court) (for air washer system)- Location: Air Washer Room, Ground Floor, Cable tray laying, power and control cabling from the air washer panel and necessary cable termination for air washer fans and pumps to be considered in the scope of work. | 1 | Nos. | |
| 937 | 283.03 | Testing and commissioning of LT Panel/Sub-distribution panels -HVAC Panel: Squash Court Ventilation (for fresh air) Location: Air Washer Room, Ground Floor. Cable tray laying, power and control cabling from the air washer panel and necessary cable termination for air washer fans and pumps to be considered in the scope of work. | 1 | Nos. | |
| 938 | 283.04 | Testing and commissioning of LT Panel/Sub-distribution panels - HVAC Panel: Squash Court Exhuast (for 3 nos. fire fans and 2 nos. cabinet fans), Location: Air Washer Room, Ground Floor. Cable tray laying, power and control cabling from the air washer panel and necessary cable termination for air washer fans and pumps to be considered in the scope of work. | 2 | Nos. | |
| 939 | 283.05 | Testing and commissioning of LT Panel/Sub-distribution panels , HVAC Panel-9 & 10: (AW-2 & 3 : Badminton Court) Location: Respective AW Rooms. Cable tray laying, power and control cabling from the air washer panel and necessary cable termination for air washer fans and pumps to be considered in the scope of work. | 2 | Nos. | |
| 940 | 283.06 | Testing and commissioning of LT Panel/Sub-distribution panels ,, HVAC Panel-11 & 12: (AW-4 & 5 : Badminton Court), Location: Respective AW Rooms. Cable tray laying, power and control cabling from the air washer panel and necessary cable termination for air washer fans and pumps to be considered in the scope of work. | 2 | Nos. | |
| 941 | 283.07 | Testing and commissioning of LT Panel/Sub-distribution panels , Installation, testing and commissioning of HVAC Panel: (Cabinet Fan : Badminton Court). Location: Respective Room at Loft Level | 3 | Nos. | |
| 942 | 283.08 | Installation, testing and commissioning of HVAC Panel: (VRF ODUs). Location: Respective Room at Loft Level | 1 | Nos. | |
| 943 | 283.09 | Installation, testing and commissioning of HVAC Panel for toilet cabinet Fans. Location: Toilet area | 1 | Nos. | |
| 944 | 284 | Hi-Wall Type Split AC Units - SITC of 5 - star efficiency class rated AIR COOLED HI-WALL SPLIT AIR CONDITIONING UNITS with R-407C / 410A / R22 refrigerant as described in specifications. The unit shall be complete with cabinet type fan coil unit and external condensing unit, complete in all respects, valves, refrigerant piping (length as per drawings to be considered) , insulation etc.. Quoted price shall include cost of wireless remote controller, cooling thermostat, wiring, control cooling and earthing. Unit shall be provided with auto timer setting. (Complete in all respect as per enclosed technical specification). The unit capacities shall be as follows : | |||
| 945 | 284.01 | Capacity : 1.5 TR | 1 | Nos. | |
| 946 | 284.02 | Capacity : 1.0 TR | 2 | Nos. | |
| 947 | 284.03 | Drain Pump - Supply, Installation, Testing and Commissioning of Drain Pump along with necessary piping for High Wall split AC unit capable of lifting condensate upto minimum 1 mtr height. | 1 | Nos. | |
| 948 | 285 | Supply and installation of Supply air grilles | |||
| 949 | 285.01 | Aluminium extruded bar type grille with VCD for supply air as per drawings | 3 | sqm | |
| 950 | 285.02 | Aluminium extruded bar type grille with VCD for treated fresh air as per drawings | 1 | sqm | |
| 951 | 285.03 | Aluminium extruded bar type grille with VCD for fresh air as per drawings | 1 | sqm | |
| 952 | 285.04 | Aluminium extruded bar type grille with VCD for exhaust air as per drawing | 2 | sqm | |
| 953 | 285.05 | Supply and installation of Volume control dampers as per drawings | 1 | Lot | |
| 954 | 285.06 | Supply and installation of Back draft damper | 1 | Lot | |
| 955 | 286 | Alignment and riveting of GI duct for the following areas: | |||
| 956 | 286.01 | Cabinet exhaust fan above air washer -1 room | 1 | Lot | |
| 957 | 286.02 | Treated fresh air ducting in Gym area | 1 | Lot | |
| 958 | 286.03 | Supply air duct in Gym area | 1 | Lot | |
| 959 | 287 | Supply, installation including air balancing of GI ducts of thickness as per IS for the following areas: | |||
| 960 | 287.01 | Squash court area | 34 | Sqm | |
| 961 | 287.02 | Sports hall reception area (for 6.5 TR IDU) | 9 | Sqm | |
| 962 | 287.03 | Swimming pool reception area (for 6.5 TR IDU) | 11 | Sqm | |
| 963 | 287.04 | Fresh air duct for gym and treated fresh air unit | 52 | Sqm | |
| 964 | 287.05 | 4 nos. air washers connection to main duct | 130 | Sqm | |
| 965 | 287.06 | Toilet Cabinet fan and toilet area | 43 | Sqm | |
| 966 | 287.07 | Exhaust duct for VRV | 16 | Sqm | |
| 967 | 287.08 | Exhaust duct for cabinet fan | 40 | Sqm | |
| 968 | 287.09 | Air washer room at ground floor | 11 | Sqm | |
| 969 | 287.1 | Fresh air for In door unit at gym reception area | 7 | Sqm | |
| 970 | 287.11 | Fresh air for In door unit at swimming pool reception area | 2 | Sqm | |
| 971 | 287.12 | Supply, installation of Fresh air Louvers for air washers | 33 | Sqm | |
| 972 | 287.13 | Supply, installation of Exhaust air louvers for cabinet fans | 9 | Sqm | |
| 973 | 287.14 | Supply, installation of Exhaust air Louvers for toilet exhaust | 1 | Sqm | |
| 974 | 287.15 | Supply, installation of Exhaust air Louvers for VRV exhaust | 3 | Sqm | |
| 975 | 288 | DUCTING WORK | |||
| 976 | 288.01 | GSS Ducting (Factory fabricated):Installation of factory fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Thickness 0.80 mm sheet | 425 | sq.m | |
| 977 | 288.02 | Supply and Installation of factory fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Thickness 0.63 mm sheet | 80 | sq.m | |
| 978 | 288.03 | GSS Ducting(Site Fabricated):Supply & installation of site fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Thickness 0.63 mm sheet | 1750 | sq.m | |
| 979 | 288.04 | GSS Ducting(Site Fabricated):Supply & installation of site fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Thickness 0.80 mm sheet | 1500 | sq.m | |
| 980 | 288.05 | GSS Oval Ducting(Factory Fabricated):Installation of factory fabricated oval/Eliptical sheet metal ducts with single wall internal smooth\nmetal liner in accordance with the approved shop drawings and specifications. The ducts shall be insulated with 19mm thick closed cell elastomeric insulation(Nitrile Rubber).Thickness 0.80 mm sheet | 675 | sq.m | |
| 981 | 288.06 | fixing of powder coated extruded aluminium\nReturn Air Grills with louvers but without volume control\ndampers complete as required including minor civil work and gap sealing with silica gel | 22 | sq.m | |
| 982 | 288.07 | Supply of powder coated extruded aluminium\nReturn Air Grills with louvers but without volume control\ndampers complete as required including minor civil work and gap sealing with silica gel | 15 | sq.m | |
| 983 | 288.08 | Fixing of powder coated extruded aluminium\nSupply Air Grills with aluminium volume control dampers as per\nspecifications | 42 | sq.m | |
| 984 | 288.09 | Supply, installation, testing and commissioning of GI volume\ncontrol duct damper complete with neoprene rubber gaskets,\nnuts, bolts, screws linkages, flanges etc, as per specifications | 1 | Sqm | |
| 985 | 288.1 | Sealant for duct at all collars of the duct and duct joints | 1 | Lot | |
| 986 | 289 | Acoustic Lining of Ducts: | |||
| 987 | 289.01 | Fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with inforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with admium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.Acoustic Lining of AHU Rooms | 304 | sq.m | |
| 988 | 289.02 | Supplying & fixing of acoustic lining on walls of AHU rooms with 50mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610mm x 610 mm frame work made of 25x50x50x50x25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications. | 4300 | sq.m | |
| 989 | 290 | Thermal Insulation: Supplying & Installation of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class “O”) insulation on existing duct after applying two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. The thickness of insulation shall meet the ECBC requirements. | |||
| 990 | 290.01 | 19 mm thick insulation. | 855 | sq.m | |
| 991 | 290.02 | 25mm thick insulation | 2585 | sq.m | |
| 992 | 291 | Chilled Water Piping -Hydrotesting of chilled water piping inside the building | |||
| 993 | 291.01 | Plant Room | 1 | Lot | |
| 994 | 291.02 | PHY-03 | 1 | Lot | |
| 995 | 291.03 | CSE-01 | 1 | Lot | |
| 996 | 292 | Insulated Valves - Installation of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. | |||
| 997 | 292.01 | Butterfly Valve - Manual BV with C I body, SS disc, nitrile sheet & O-ring & PN 16 pressure rating for chilled water/hot water circulation as specified - 600 mm | 3 | Nos. | |
| 998 | 293 | AHU Controls - Installation of Pressure independent type 2 way Balancing and modulating Control valves in a single Unit of Valve. | |||
| 999 | 293.01 | Size : 65 mm | 1 | Nos. | |
| 1000 | 293.02 | Size : 50 mm | 5 | Nos. | |
| 1001 | 293.03 | Size : 40 mm | 5 | Nos. | |
| 1002 | 294 | Pressure Gauges - Installation of pressure gauges complete with siphon and nipple welding as required as per site conditions. Supply of sockets to be considered. | 170 | Nos. | |
| 1003 | 295 | Temperature Gauges - Installation of temperature gauges complete with all accessories such as thermowell and compression fitting as per site conditions. Supply of nipples and its welding etc. to be included as per the site requirements. | 86 | Nos. | |
| 1004 | 296 | Automatic Purge & Drain Valves - Installation of 15mm valve for air venting and drain purposes. Necessary supply and welding of nipples to be considered as required in the site conditions. | 81 | Nos. | |
| 1005 | 297 | CONDENSER WATER PIPING - Hydro Testing of condenser water pipes in the following areas | |||
| 1006 | 297.01 | Plant room | 1 | Lot | |
| 1007 | 298 | Valves without Insulation - Supplying & fixing of following size valves, gauges and strainers for condenser water circulation as per specifications, BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile\nsheet & O-ring & PN 16 pressure rating as specified | |||
| 1008 | 298.01 | Size : 750 mm | 6 | Nos. | |
| 1009 | 298.02 | Size 300 mm | 1 | Nos. | |
| 1010 | 298.03 | Size 250 mm | 4 | nos. | |
| 1011 | 299 | Supply and Installation of medium class G.I. condensate drain pipes duly insulated with 9 mm thick nitrile rubber on wall/ Floor/ Ceiling of following size along with necessary clamps, fittings such as bends,tees etc. adequately supported as per specifications and as required. | |||
| 1012 | 299.01 | 50 mm Ø | 165 | Mtrs. | |
| 1013 | 299.02 | 40 mm Ø | 62 | Mtrs. | |
| 1014 | 299.03 | 25 mm Ø | 194 | Mtrs. | |
| 1015 | 300 | Insulation for Chilled Water Piping Laying/ fixing of fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. The thickness of insulation shall meet the ECBC requirements. | |||
| 1016 | 300.01 | Size : 600 mm | 31 | Rmt | |
| 1017 | 300.02 | Size : 250 mm | 138 | Rmt | |
| 1018 | 300.03 | Size : 200 mm | 52 | Rmt | |
| 1019 | 300.04 | Size : 150 mm | 48 | Rmt | |
| 1020 | 300.05 | Size : 125 mm | 10 | Rmt | |
| 1021 | 300.06 | Size : 100 mm | 24 | Rmt | |
| 1022 | 300.07 | Size : 80 mm | 20 | Rmt | |
| 1023 | 300.08 | Size : 65 mm | 237 | Rmt | |
| 1024 | 300.09 | Size : 50 mm | 110 | Rmt | |
| 1025 | 300.1 | Size : 40 mm | 73 | Rmt | |
| 1026 | 301 | Insulation for Valves - Supplying and fixing of insulation with Aluminium Cladding of the same specifications as that of piping for following valves, strainers, gauges in the chilled water plumbing and adequately supported as per specifications. Butterfly Valve | |||
| 1027 | 301.01 | Size : 600 mm | 3 | Nos. | |
| 1028 | 301.02 | Size : 300 mm | 2 | Nos. | |
| 1029 | 301.03 | Size : 250 mm | 24 | Nos. | |
| 1030 | 301.04 | Size : 200 mm | 2 | Nos. | |
| 1031 | 301.05 | Size : 150 mm | 2 | Nos. | |
| 1032 | 301.06 | Size : 125 mm | 14 | Nos. | |
| 1033 | 301.07 | Size : 100 mm | 16 | Nos. | |
| 1034 | 301.08 | Size : 80 mm | 24 | Nos. | |
| 1035 | 301.09 | Size : 65 mm | 86 | Nos. | |
| 1036 | 301.1 | Size : 50 mm | 54 | Nos. | |
| 1037 | 301.11 | Size : 40 mm | 26 | Nos. | |
| 1038 | 302 | Insulation for Valves - Supplying and fixing of insulation with Aluminium Cladding of the same specifications as that of piping for following valves, strainers, gauges in the chilled water plumbing and adequately supported as per specifications. Balancing Valve | |||
| 1039 | 302.01 | Size : 250 mm | 3 | Nos. | |
| 1040 | 303 | Insulation for Valves - Supplying and fixing of insulation with Aluminium Cladding of the same specifications as that of piping for following valves, strainers, gauges in the chilled water plumbing and adequately supported as per specifications. Y-strainer | |||
| 1041 | 303.01 | Size : 250 mm | 3 | Nos. | |
| 1042 | 303.02 | Size : 80 mm | 2 | Nos. | |
| 1043 | 303.03 | Size : 65 mm | 43 | Nos. | |
| 1044 | 303.04 | Size : 50 mm | 26 | Nos. | |
| 1045 | 303.05 | Size : 40 mm | 13 | Nos. | |
| 1046 | 304 | Insulation for Valves - Supplying and fixing of insulation with Aluminium Cladding of the same specifications as that of piping for following valves, strainers, gauges in the chilled water plumbing and adequately supported as per specifications. Pot Strainer | |||
| 1047 | 304.01 | Size : 250 mm | 3 | Nos. | |
| 1048 | 305 | Insulation for Valves - Supplying and fixing of insulation with Aluminium Cladding of the same specifications as that of piping for following valves, strainers, gauges in the chilled water plumbing and adequately supported as per specifications. NON - RETURN VALVE | |||
| 1049 | 305.01 | Size : 300 mm | 1 | Nos. | |
| 1050 | 305.02 | Size : 250 mm | 6 | Nos. | |
| 1051 | 306 | Insulation for Valves - Supplying and fixing of insulation with Aluminium Cladding of the same specifications as that of piping for following valves, strainers, gauges in the chilled water plumbing and adequately supported as per specifications. Rubber Bellow | |||
| 1052 | 306.01 | Size : 250 mm | 18 | Nos. | |
| 1053 | 307 | AHU Control (2-way PIBCV valve) | |||
| 1054 | 307.01 | Size : 80 mm | 2 | Nos. | |
| 1055 | 307.02 | Size : 65 mm | 43 | Nos. | |
| 1056 | 307.03 | Size : 50 mm | 26 | Nos. | |
| 1057 | 307.04 | Size : 40 mm | 13 | Nos. | |
| 1058 | 308 | Insulation on pumps- Supplying and fixing of insulation with Aluminium Cladding of the same specifications as that of piping for following valves, strainers, gauges in the chilled water plumbing and adequately supported as per specifications on Primary chilled water pumps | 3 | Nos. | |
| 1059 | 309 | Supplying and fixing of insulation with Aluminium Cladding of the same specifications as that of piping for following valves, strainers, gauges in the chilled water plumbing and adequately supported as per specifications onSecondary chilled water pumps | 3 | Nos. | |
| 1060 | 310 | Supplying and fixing of insulation with Aluminium Cladding of the same specifications as that of piping for following valves, strainers, gauges in the chilled water plumbing and adequately supported as per specifications on air separator | 1 | Nos. | |
| 1061 | 311 | Supplying and fixing of insulation with Aluminium Cladding of the same specifications as that of piping for following valves, strainers, gauges in the chilled water plumbing and adequately supported as per specification on pressurised expansion tank | 1 | Nos. | |
| 1062 | 312 | Aluminium cladding:Supply and fixing 500g polythene with proper netting wire and 0.63mm aluminium sheet cladding complete etc. as per specifications and as required complete in all respect to the installed pipeline on which expanded polystyrene has already been installed. | 770 | Sqm | |
| 1063 | 313 | Supply, laying and termination of power cabling and control cabling for all the fire dampers (supply and return both) of AHUs to their respective panels including testing of the fire dampers after cabling. (for CSE-01, PHY-01 and PHY-03) | 71 | Sets | |
| 1064 | 314 | Supply, laying and termination of control cable from all the fire dampers (supply and return both) of AHUs to their respective panels including testing of the fire dampers after cabling. | 33 | Sets | |
| 1065 | 315 | Supply and laying of cabling for all PICV valves and installation of actuator | 70 | Sets | |
| 1066 | 316 | Termination of power cabling for all the AHUs on both sides / single side as per the site requirement | 25 | Nos. | |
| 1067 | 317 | Termination of control cable for limit switch & marine light for AHUs at both ends | 70 | Nos. | |
| 1068 | 318 | REFRIGERANT PIPING FOR VRV SYSTEM installation, testing and commissioning of 19mm thick nitrile rubber insulated liquid and suction copper refrigerant piping of following sizes along with necessary fittings and Y joints to inter connect the condensing unit and the evaporating unit. | |||
| 1069 | 318.01 | 41.3 mm Ø | 70 | Rmts. | |
| 1070 | 318.02 | 34.9 mm Ø | 9 | Rmts. | |
| 1071 | 318.03 | 28.6 mm Ø | 33 | Rmts. | |
| 1072 | 318.04 | 19.1 mm Ø | 70 | Rmts. | |
| 1073 | 318.05 | 15.9 mm Ø | 42 | Rmts. | |
| 1074 | 319 | Installation of Wheels of butterfly valves | 16 | Nos. | |
| 1075 | 320 | Supply and installation of Flow switch | 6 | Nos. | |
| 1076 | 321 | installation of Expansion bellows - 300 NB | 2 | Nos. | |
| 1077 | 322 | Supply and installation of louvers with bird screen for fresh air intake | |||
| 1078 | 322.01 | Size - 1.34m x 0.75m | 12 | Nos. | |
| 1079 | 323 | Dismantling of pipeline with insulation | |||
| 1080 | 323.01 | 300 NB | 40 | Mtr | |
| 1081 | 324 | Reinstallation of pipeline with insulation and cladding as per specification | 40 | Mtr | |
| 1082 | 325 | Painting of Condensor line Piping | 550 | Sqm | |
| 1083 | 326 | Supply & Installation Of Louver for Axial Fan | 9 | Sqm | |
| 1084 | 327 | Installation of Actuator of Motorised BFV | 6 | Nos. | |
| 1085 | 328 | Supply, Installation and insulation of check valve in decoupler line | 1 | Nos. | |
| 1086 | 329 | Design, manufacture, supply, Erection and Commissioning of wire-rope electric monorail hoist conforming to IS: 3938 tested to 25% overload of following specification. This including monorail beam, supporting structure and other accessories as required for completness system | |||
| 1087 | 329.01 | Lifting capacity : 2.0 Tons\nHeight of Lift : 5.5 meters.\nTravel Length : 45 meters (straight path)\nType of suspension : Motor driven trolley | 2 | Each | |
| 1088 | 329.02 | Lifting capacity : 4.0 Tons\nHeight of Lift : 5.5 meters.\nTravel Length : 45 meters (straight path)\nType of suspension : Motor driven trolley | 1 | Each | |
| 1089 | 330 | Supply and installation of local control station panel for Air washer unit / kitchen scrubber / cabinet fan. Panel comprise of 7 sets of ON, lockable OFF push button , panel wiring , terminal block etc. complete in all respect. | 1 | Each | |
| 1090 | 331 | Supply and installation of local control station panel for Air washer unit / kitchen scrubber / cabinet fan. Panel comprise of 14 sets of ON, lockable OFF push button, panel wiring , terminal block etc. complete in all respect. | 1 | Each | |
| 1091 | 332 | Supply of following sizes of heavy duty exhaust fan suitable for single phase 230 volts, 50 Hz., AC supply complete with motor, louvers/shutters etc. complete as required. (450mm dia. 4400CMH) | 4 | Each | |
| 1092 | 333 | Testing and Commissioning of Split Air conditioner including one time servicing like filter cleaning, gas charging. | 12 | Each | |
| 1093 | 334 | Circular Inline fan for Garbage Room Exhaust, Ceiling suspended inline centrifugal fans in galvanized/steel casing, with fastening brackets including flexible connections to connect fan with 150 mm dia PVC pipe at outlet and inlet.Air Flow : 100 cfm,Static Pressure : 15 mm WC | 1 | Nos. | |
| 1094 | 335 | Installation of factory fabricated Double Skinned cabinet type fans. Testing and commissioning of fan along with panel including all accessories.7000 CFM ; 25 mm st. pr. | 2 | Nos. | |
| 1095 | 336 | Supply, installation, balancing and commissioning of site fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Thickness 0.63 mm sheet | 80 | Sq.m | |
| 1096 | 337 | Supply, installation, balancing and commissioning of factory fabricated GI Round duct ,complying with IS: 277 and having 120 GSM coating & insulated with 19mm Nitrile rubber classification; Spiral Lock-Seam Duct, droppers, duct joiners, bends, reducer, Branch Collar, damper, dummy caps and wire ropes and other necessory supports etc. Thickness 0.63 mm sheet | 50 | Sq.m | |
| 1097 | 338 | Testing and commissioning of Fire Damper including all safety interlocks. Item include rectification of any fault observed in fire damper of school building. Item also include supply, laying and fixing of balance power cable, control cable and power socket from control panel to fire damper. | 82 | Set | |
| 1098 | 339 | supply and installation of Make up connection with approx. 2 meter GI pipe connection for 1 nos. air washers | 1 | Set | |
| 1099 | 340 | supply and Installation of piping (65 NB) for 1 nos. kitchen scrubber and ducting at the exhaust end | 1 | Set | |
| 1100 | 341 | Supply, Installation of kitchen scrubber panel including complete electrics in the panel, cable tray laying, termination, testing and commissioning of the scrubber and panel | 1 | Set | |
| 1101 | 342 | Supply, installation of supply air grilles in buildings | 16 | Nos. | |
| 1102 | 343 | Wall mounted type propeller fans for MRS building | |||
| 1103 | 343.01 | Installation, testing and commissioniong of wall mounted type propeller fans Size 457mm, dia 2600 cfm, 10mm static pressure with fan motor to be energy efficient with efficiency level of IE3 or Eff-1 whichever is more efficient | 3 | Nos. | |
| 1104 | 344 | Supply, installation of supply air grilles in MRS building | 5 | Nos. | |
| 1105 | 345 | Supply of Cable, laying, termination, panel installation, testing and commissioning for lift pressurization fans | 2 | Sets | |
| 1106 | 346 | Water softening system for HVAC system Design, supply, installation and testing of water softening system to be installed in the basement of HVAC plant room along with electrical panel Providing and fixing ‘Cation’ ION exchange water softener abricated from minimum 8 mm thick M.S. plate on min. shell and 10 mm thick M.S. plate on dished ends (Quality of Steel as per IS:2062 Grade B, thickness as per ASME Section 8) complete with initial charge of filter media and ION exchange resins, face piping accessories, diaphragm valves of approved specifications, HDPE Brine tank of min. 500 Liters, piping testing and commissioning complete with resins of approved quality and make and regeneration assembly complete with valves, ejector, brine suction valves and iping. All internal parts of the softener shall be rubber lined as per approved pecifications. Minimum expected rate of flow: App. 30000 lph Total soft water to be produced between two regenerations: app. 200 Cu.m Expected raw water hardness : app. 450-500 ppm Expected treated water hardness: less than 5 ppm (Zero Commercial hardness) Max. working pressure : 4 Kg/cm2 It includes all related accessories like pressure gauges, isolation valves, interconnected piping between filters (from filter feed pump discharge till softener outlet) | 2 | Nos. | |
| 1107 | 347 | Filter feed cum Backwash Pump ( At HVAC PLANT ROOM SV4)\nProviding and fixing In-line vertical multistage centrifugal clear water pump set SS-304 casing, SS-304 impeller, SS-316 shaft, CI base with CED coating, complete directly coupled with TEFC induction motor of class \"F\" insulation & efficiency class EFF-1, 2900 RPM, suitable for operation on 415 volts ±10%, 3 phase, 50 Hz, A.C. supply ( with mechanical seal ), pressure gauges with isolation valve at suction and discharge, isolating valves at suction and discharge , flexible joints on suction and discharge, strainer at suction, Non - return valve at discharge end, vibration elimination pads, etc. mounted on a MS base frame and necessary RCC foundations as per requirement complete in all respects and as per speicification complete as per directions of the engineer-incharge with the following capacities: No. of Pumps : 3 (2 working + 1 stand by) Capacity : 30 m3/Hour of Each Pump Head : 30 M | 1 | Set | |
| 1108 | 348 | Soft water llifting pump\nProviding and fixing vertical, inline multistage centrifugal pumping set with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel shaft as per IEC standards and GJL250 cast iron suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900 RPM, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply complete with all standard accessories including pressure switch, pressure gauges with isolation valve at suction and discharge, isolating valves at suction and ischarge , flexible joints on suction and discharge, strainer at suction, Non - return valve at discharge end with nuts, bolts & washer including mild steel flanges, where ever required with vibration elimination pads etc. base frame, nuts and bolts and necessary RCC foundations as per requirement as per instructions and pump shall have following duty including electric control panel and necessary cables etc: No. of Pumps : 3 (2 Working + 1 Stand by) Capacity : 30 m3/Hour of Each Pump Head : 30 M (complete set as mentioned above) | 1 | Set | |
| 1109 | 349 | Sump Pumps for Lifting Water from Pump Room Providing and fixing compact monoblock dry motor submersible pumps for suitable rating, with non-clog free flow open impeller, suitable for operation on 220/400 volts + 10% -15% minimum solid handling capacity of 46mm suitable for operation on 240 volts + 5% -15%, 50 C/s A.C single phase supply, speed 960/1440 RPM including oil chamber, guide wire for lifting & lowering of pump, M.S. galvanized lifting chain, duck foot bend with following specifications: The above pump sets must be supplied complete with following accessories. Complete piping 100mm dia common delivery upto outside the sump. (The pipe shall be heavy duty G.I) -- 1 Set ,80mm dia butterfly valve.-- 2 Nos , 80 mm dia reflux valve.-- 2 Nos Necessary cables from pump set to control panel (position of panel marked in enclosed layout in plant room).-- 1 Set Electrical panel having all necessary accessories & safety devices of standard specifications. (Panels with sump pumps near each sump as per site conditions). --1 No. Automatic built-up water level controller with necessary length of cable upto control panel. No. of Pumps : 2 nos (1 working + 1 stand by) Discharge - 250 LPM Each | 1 | Set | |
| 1110 | 350 | Salt Saturator Providing and fixing Salt Saturator assembly (for supply of salt solution) consisting of HDPE/PVC tanks with automatic agitators and all required accessories for holding and supplying salt for softener complete in all respects, including providing and fixing vertical, inline multistage centrifugal pumping set with stainless steel SS-316 L stage casing and SS-316 L impellers with stainless steel shaft and suction & discharge casing . The effective capacity of the system to be of minimum 10% greater than actual salt required for approx. 3 Days with complete structural arrangement including RCC foundation etc. as per instructions of engineer-in-charge and approved fabrication shop drawings. (i) Recommended no. of tanks = 1 Nos. (ii) Total Capacity of each Tank = 5 000 Liters (complete set as mentioned above) | 1 | Set | |
| 1111 | 351 | \nElecrical panel For Local Pump Room - SV-4Design, manufacture, supply, installation, testing and commissioning of the Power Distribution Panel, front operated, cubicle construction, Floor mounted type, fabricated out of 16 swg thick CRCA Sheet, Compartmentalized with hinged lockable doors, dust and vermin proof, Powder coated of approved shade, Cable alley, inter-connections, having Switch gear and accessories mounting, internal wiring, earth terminals, Top/ Bottom cable entry, numberings etc. suitable for operation of 415 volts, 3 phase, 4 wire, 50 Hz, AC Supply with enclosure protection class IP 54 complete as required and as specified with the following: INCOMER - Each Incomer shall consit of : a 63 Amps,Four pole, 11 KA MCCB with rotary handle on door with overload, short circuit and earth fault protection. b Voltmeter (0-500 Volts) with selector Switch & protected by MCB's. c Ammeter (0-200 Amps) with selector Switch &CT's etc. d Set of (R,Y,B) LED phase and ON & OFF indication Lamps. BUSBAR e 1 Set 11KV, 250 MVA, 200 Amps Three Phase busbars of aluminium with Rear cable termination. Out Going For - Filter Feed cum backwash pump (3 nos. pump) Each pump feeder shall consit of : a) 25 Amps. TP with nuetral link MCCB ( Motor Duty) 1.1 KA with rotary handle on door.\nb) Ammeter (0-50 Amps) with selector Switch & CT's etc. c) Set of ON / OFF LED indication Lamps protected by MCB. d) Fully Automatatic Star-Delta starters suitable for 7.5 HP motor with over load protection & current sensing type single phase preventor complete with all accessories and internal wiring etc. as required for automatic operation. e) Set of Selector switch for Auto/Manual/OFF operation.\nf) Set of ON & OFF Push Buttons Soft Water Supply pumps ( 3 Nos. Pump) Each pump feeder shall consit of : a) 25 Amps. TP with nuetral link MCCB ( Motor Duty) 1.1 KA with rotary handle on door. b) Ammeter (0-50 Amps) with selector Switch & CT's etc. c) Set of ON / OFF LED indication Lamps protected by MCB. d) Fully Automatatic Star-Delta starters suitable for 7.5 HP motor with over load protection & current sensing type single phase preventor complete with all accessories and internal wiring etc. as required for automatic operation. e) Set of Selector switch for Auto/Manual/OFF operation. f) Set of ON & OFF Push Buttons For Sump Pumps - 2 Nos. (1 W + 1S) Each pump feeder shall consit of : a) 25 Amps. TP with nuetral link MCCB ( Motor Duty) 1.1 KA with rotary handle on door. b) Set of ON / OFF LED indication Lamps protected by MCB. \nNOTE:-1. All MCCB shall have 100% Ics =Icu 2.Panel shall be provided with NO-NC Potential free contact for BMS compliance. For Agitator of Salt saturator Each motor feeder shall consit of : a) 10 Amps. DP MCB with suoitable DOL starter with rotary handle on door. b) Set of ON / OFF LED indication Lamps protected by MCB. \nd) Set of ON & OFF Push Buttons NOTE:-1. All MCCB shall have 100% Ics =Icu 2.Panel shall be provided with NO-NC Potential free contact for BMS compliance. Outgoing -3 nos. Each motor feeder shall consit of : a) 16 Amps. TP with neutral link MCB with suoitable DOL starter with rotary handle on door. b) Set of ON / OFF LED indication Lamps protected by MCB. \nc) Set of ON & OFF Push Buttons \nd) Set of Selector switch for Auto/Manual/OFF operation.\nNOTE:-1. All MCCB shall have 100% Ics =Icu 2.Panel shall be provided with NO-NC Potential free contact for BMS compliance. \nFor dosing pump\n2 Nos. TP MPCB 10 KA having overload and short circuit protection with 0.5 HP DOL Starter. (For single phase Dosing Pumps). | 1 | Set | |
| 1112 | 352 | Acrylic body rotameter with flanged end with compleet accessories nuts, bolts, gasket etc. complete in all respect | 2 | Each | |
| 1113 | 353 | Providing & fixing of Air blower with air filter and TEFC induction motor 400 / 440 volts, 50 cycle connected to blower with \"V\" belt and mounted on common base frame and of following specification.\na) Capacity 35 cfm\nb) Pressure 0.35 kg / sq. cm\nc) Quantity | 2 | Each | |
| 1114 | 354 | Providing and fixing chemical dosing system consisting of 2 nos. electronic dosing pumps (1W+1S) of approved make with all accessories, suitable to doze chemical solution upto 1 ppm doze (of Sodium Hypo-chloride solution) to a filtered water flow of 40,000 lph. against a pressure of 1.5 kg/cm2 complete with FRP moulded solution holding tank of min. 200 litre with all standard accessories & structural arrangement including suitable foundation bolts & other accessories etc.complete as required and as specified. 1 set consists of 2 nos. of pumps(1W+1S) | 1 | Set | |
| 1115 | 355 | Supply of Water testing kit | 1 | Set | |
| 1116 | 356 | MS Pipes Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. Pipes (complete for water softener, water lifting and sump pump syetem) | 1 | Lot | |
| 1117 | 357 | Valves and fittings Providing & fixing Butterfly valve with C.I. body & disc, stainless steel steel steel/carbon steel shaft, Hand lever operated, PN 1.6 rating, with matching flanges, nut , bolts & gasket conforming to IS:13095/BS:5155. Complete valves | 1 | Lot | |
| 1118 | 358 | Providing and fixing vertical Single Media Pressure Sand Filter (minimum Height on Straight 1500mm) fabricated from high performance M.S plate of minimum 10mm thick for shell & 12mm thick for dished ends,(Quality of Steel as per IS:2062 Grade B, thickness as per ASME Section 8),Tested to 5.0 Kg/m2 , internally treated with coal-tar epoxy, air scouring, collection system initial charge of media, M.S face piping with necessary flanges, gaskets, isolating valves, accessories,nuts & bolts, external painting with 2 coats of red oxide primer and enamel paint etc. with suitable foundation boits & other accessories,mounting frame, complete as required & as specified as per directions of the engineer-in-charge. with the following: Discharge : 30 m3/Hour Each ,Filtration Rate : 10500 lit./m2/h , Suggested dia app. : 2.0 m | 2 | Set | |
| 1119 | 359 | Providing, fixing and testing of M.S. Black ERW Heavy grade Class C piping as per IS: 1239 M.S. Black ERW Heavy grade Class C piping as per IS: 1239. The Underground piping with necessary flanges & fittings such as elbows, tees including welding, excavation & providing cement concrete blocks as supports pipe alongwith coating and wrapping of underground pipes with 4mm thick & 100mm wide approved bitumen-based wrapping material . (Pypkote/Makpolycote) with overlap of 25mm (min) as per manufacturer's specification | |||
| 1120 | 359.01 | 150 NB | 210 | RMT | |
| 1121 | 359.02 | 100 NB | 140 | RMT | |
| 1122 | 360 | Above ground piping with necessary conceret blocks as support, flanges, fittings such as elbows, tees, supports and Painting with synthetic enamel paint two coats with one primer coat as per the requirement of local fire service department. | |||
| 1123 | 360.01 | 150 NB | 411 | RMT | |
| 1124 | 360.02 | 100 NB | 252 | RMT | |
| 1125 | 360.03 | 80 NB | 30 | RMT | |
| 1126 | 360.04 | 25 NB | 105 | RMT | |
| 1127 | 361 | Pipes for Internal Wet Riser System / Headers\nM.S. Black ERW Heavy grade class 'C' piping as per IS: 1239. The pipes being suspended from ceilings by using hi-tech supports complete with necessary specials such as tees, bends, flanges, reducers, orifice plates etc complete as per the requiremet of local Fire Service Department. Rate quoted shall include for painting of pipe and support with a coat of primer and two coats of synthetic enamel paint of approved colour/ make for above ground piping as per the TS / IS standards and local fire service department requirement complete including supply and installation of G.I. Rods, clamps, angle and , fasteners, nozzles and flanges for instrument mounting etc. | |||
| 1128 | 361.01 | 250mm dia (6.35 mm Thick ) | 10 | Mtr. | |
| 1129 | 361.02 | 200mm dia (6.35 mm Thick) | 15 | Mtr. | |
| 1130 | 361.03 | 150mm dia | 15 | Mtr. | |
| 1131 | 361.04 | 100mm dia | 50 | Mtr. | |
| 1132 | 361.05 | 80mm dia | 30 | Mtr. | |
| 1133 | 361.06 | 25mm dia | 20 | Mtr. | |
| 1134 | 362 | Pipe Accessories | |||
| 1135 | 362.01 | 90 ° Elbow suitable for 150 mm NB M.S. Black ERW Heavy grade Class C piping as per IS: 1239 | 67 | Nos. | |
| 1136 | 362.02 | 90 ° Elbow suitable for 100mm NB M.S. Black ERW Heavy grade Class C piping as per IS: 1239 | 21 | Nos. | |
| 1137 | 362.03 | U clamp for fixing 150 mm NB MS pipe with Nut & Washer | 154 | Nos. | |
| 1138 | 362.04 | U clamp for fixing 100 mm NB MS pipe with Nut & Washer | 64 | Nos. | |
| 1139 | 362.05 | 100 X 10 mm Anchor Fastner | 557 | Nos. | |
| 1140 | 362.06 | 150 mm NB to 100 mm NB MS reducer | 12 | Nos. | |
| 1141 | 362.07 | 100 mm NB to 80 mm NB MS reducer | 7 | Nos. | |
| 1142 | 362.08 | 25 mm Nipple (300 mm long) | 404 | Nos. | |
| 1143 | 362.09 | 90 ° Elbow suitable for 25mm NB M.S. Black ERW Heavy grade Class C piping as per IS: 1239 | 202 | Nos. | |
| 1144 | 362.1 | Union suitable for 25 NB MS pipe | 101 | Nos. | |
| 1145 | 362.11 | 25 mm soket | 101 | Nos. | |
| 1146 | 363 | Providing, fixing and testing of Fire Pump | |||
| 1147 | 363.01 | Booster Pump Capacity 900 LPM | 2 | Nos. | |
| 1148 | 364 | Providing, fixing and testing of Valves | |||
| 1149 | 364.01 | 150 mm butterfly Valve | 6 | Nos. | |
| 1150 | 364.02 | 150 mm Non Return Valve | 2 | Nos. | |
| 1151 | 364.03 | 100 NB non return valve | 5 | Nos. | |
| 1152 | 364.04 | 100 mm butterfly Valve | 16 | Nos. | |
| 1153 | 365 | providing Fixing and testing of Copper Alloy 25 mm Air release valve, having threaded connection including the cost of 25 mm dia stainless steel steel Gate valve with required fittings as per\nstandard design | 16 | Nos. | |
| 1154 | 366 | Providing, fixing and testing of internal stainless steel fire hydrants with 63mm dia single outlets and with instantaneous female type SS coupling for connection to hose conforming to I.S:5290 Type-A (Oblique) 80 mm dia inlets flanged, 5 mm thick neoprene compressed asbestos gasket, bolts, nuts and washers complete as per approved design. | 45 | Nos. | |
| 1155 | 367 | Providing, fixing and testing of external stainless steel fire hydrants with 63mm dia single outlets and with instantaneous female type SS coupling for connection to hose conforming to I.S:5290 Type-A (Oblique) 80 mm dia inlets flanged, 5 mm thick neoprene compressed asbestos gasket, bolts, nuts and washers complete as per approved design. | 5 | Nos. | |
| 1156 | 368 | Providing, fixing and testing of 100mm dia two-way fire brigade inlet connection consisting of 2 nos 63mm size instantaneously type male coupling and shall be protected by cap scored with a chain glass bore etc. | 5 | Nos. | |
| 1157 | 369 | Providing, fixing and testing of external fire hose box, wall mounting or free standing type, made out of FRP of approved colour of 30\"x24\"x10\" size to accommodate two 15m length of delivery hoses and a branch pipes with front glass double door with lock and keys and break glass recess for keys, all complete. | 100 | Nos. | |
| 1158 | 370 | Providing, fixing and testing of first aid fire hose reel (with wall mounting swinging-type drum complying to IS:884), fitted with Thermo Plastic Synthetic Reinforced material conforming to IS:12585-1988 Type II 20 mm bore and 36.5 m long, with standard size outlet shut off Nozzle with 25 mm ball valve, brackets, complete in all respects. ( MS/GI Connection Pipe measured separately ) | 100 | Nos. | |
| 1159 | 371 | Providing, fixing and testing of 63mm dia 15m long RRL - Reinforced rubberized fabric lined hose including stainless steel male and female instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all respects hose to IS:636 type-II and male, female coupling to IS: 903 with ISI certification. The Hose shall be rated for burst pressure of 37.5kg/ cm2 | 200 | Nos. | |
| 1160 | 372 | Providing, fixing and testing of standard short size branch pipe with hand operated stainless steel 20mm nominal bore outlet with standard instantaneous type 63mm dia coupling as per IS: 903 complete as required. | 200 | Nos. | |
| 1161 | 373 | Providing, fixing and testing of 25 mm Ball Valve | 90 | Nos. | |
| 1162 | 374 | Providing, fixing and testing of M.S. Flange | |||
| 1163 | 374.01 | Suitable for 150 NB MS pipe | 16 | Nos. | |
| 1164 | 374.02 | Suitable for 100 NB MS pipe | 52 | Nos. | |
| 1165 | 374.03 | Suitable for 80 NB MS pipe | 95 | Nos. | |
| 1166 | 375 | Providing, fixing and testing of M.S. structural work fabricated from standard section e.g. M.S rounds bar, angles, channels, plates including cutting to size,drilling,welding fixing and welding to insert plates in RCC structural members as recommended size of fasteners to RCC slab as directed by engineer-in-charge including cutting an making good the walls, ceilings and floors (for pipe structural supports, U clamps etc.) | 2603 | Kg | |
| 1167 | 376 | Providing, fixing and testing of Pressure gauge (0-14 kg/Cm2) with necessary ball / isolation valve and fittings such as tees, elbows and painting and supports etc. complet | 2 | Nos. | |
| 1168 | 377 | Providing, fixing and testing of pressure switch (for operation at 0-15Kg./sqcm) with required fittings and accessories complet | 4 | Nos. | |
| 1169 | 378 | Providing, fixing and testing of MCC panel for 2 nos. of booster pump capacity 900lpm auto start and stop | 1 | Nos. | |
| 1170 | 379 | Providing, fixing and testing of 2c X 2.5sq mm cu armored cable (for PS) | 600 | mtr | |
| 1171 | 380 | Providing, fixing and testing of 3.5c X 35sq mm cu armored cable (for pump) | 150 | mtr | |
| 1172 | 381 | Providing, fixing and testing of 3.5c X 70sq mm cu armored cable ( for MCC panel) | 25 | mtr | |
| 1173 | 382 | Painting and testing of old work done by simplex, related to fire fighting work in 5 building POD. | 1 | lot | |
| 1174 | 383 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : | |||
| 1175 | 383.01 | 200mm dia | 4 | Each | |
| 1176 | 383.02 | 150mm dia | 2 | Each | |
| 1177 | 383.03 | 100mm dia | 1 | Each | |
| 1178 | 383.04 | 80mm dia | 2 | Each | |
| 1179 | 384 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : | |||
| 1180 | 384.01 | 200mm dia | 3 | Each | |
| 1181 | 384.02 | 150mm dia | 1 | Each | |
| 1182 | 384.03 | 80mm dia | 1 | Each | |
| 1183 | 385 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : | |||
| 1184 | 385.01 | 200mm dia | 1 | Each | |
| 1185 | 385.02 | 150mm dia | 1 | Each | |
| 1186 | 385.03 | 100mm dia | 6 | Each | |
| 1187 | 385.04 | 80mm dia | 1 | Each | |
| 1188 | 386 | Providing and Fixing Copper Alloy 25 mm Air release valve, having threaded connection | 4 | Each | |
| 1189 | 387 | Providing and fixing of upto 25 mm dia stainless steel steel ball valve with required fittings as per standard design. | 4 | Each | |
| 1190 | 388 | Providing and fixing stainless steel steel fullway valve with wheel tested to 20 Kg/cm2 of approved quality as per I.S:778. Class-II (a) 25 mm dia | 9 | Each | |
| 1191 | 389 | FIRE FIGHTING EQUIPMENTS & ACCESSORIES FOR EXTERNAL & INTERNAL HYDRANT SYSTEM | |||
| 1192 | 390 | Providing, fixing and testing of external stainless steel fire hydrants with 63mm dia single outlets and with instantaneous female type SS coupling with cast iron wheel for connection to hose conforming to I.S:5290 Type- (Oblique) 80 mm dia inlets flanged, 5 mm thick neoprene compressed asbestos gasket, SS cap with chain, bolts, nuts and washers complete as per approved design. | 2 | Each | |
| 1193 | 391 | Providing and fixing fire hose box, wall mounting or free standing type,made out of FRP of approved colour of 30\"x24\"x10\"size to accommodate two 15m length of delivery hoses and a branch pipes with front glass double door with lock and keys and break glass recess for keys, all complete. (The sample to be approved before installations). | 2 | Each | |
| 1194 | 392 | Providing and fixing stainless steel steel fire hydrant valve single headed oblique pattern to type ‘A’ of I.S: 5290-1977 with 80 NB flange inlet with 63mm dia instantaneous SS female coupling , with blank caps and chain complete with instantaneous spring lock complete in all respect. | |||
| 1195 | 392.01 | Stainless steel Landing Valve | 9 | Each | |
| 1196 | 393 | Providing and fixing standard short size branch pipe with hand operated stainless steel 20mm nominal bore outlet with standard instantaneous type63mm dia coupling as per IS: 903 complete as required. Stainless steel branch pipe | 11 | Each | |
| 1197 | 394 | Providing and fixing first aid fire hose reel (with wall mounting swinging-type drum complying to IS:884), fitted with Thermo Plastic Synthetic Reinforced material conforming to IS:12585-1988 Type II 20 mm bore and 36.5 m long, with standard size outlet shut off Nozzlewith 25 mm ball valve, brackets, complete in all respects including MS/GI Connection Pipe. | 9 | Each | |
| 1198 | 395 | Providing and fixing 63mm dia 15m long RRL - Reinforced rubberized fabric lined hose including stainless steel male and female instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all respects hose to IS:636 type-II and male, female coupling to IS: 903 with ISI certification. The Hose shall be rated for burst pressure of 37.5 kg/ cm2 | 22 | Each | |
| 1199 | 396 | Providing and fixing standard fire mans axe with heavy duty insulated rubber handle as per IS: 926 with clamps. | 11 | Each | |
| 1200 | 397 | Providing and Fixing Indoor fire hose door, frame fabricated from MS angle with double glazed front door of 14 gauge M.S sheet and locking arrangement, painted “Fire Hose” with stove enameled paint, written on front, including necessarysupports of approximate size 2100x1200x 150mm deep to house two lengths of RRL hose with couplings, branchpipe and first aid hose reel Drum with rubber hose and nozzle and fire axe and single outlet landing valve complete in all respects. The door shall be painted with one coat of primer and two or more coats of Synthetic enamel paint of approved make or shade as required. | 9 | Each | |
| 1201 | 398 | Providing and fixing 100mm dia two-way fire brigade inlet connection consisting of 2 nos 63mm size instantaneously type male coupling and shall be protected by cap scored with a chain glass bore etc. complete with one 100mm dia sluice valve and 100mm dia non-return valve (To be connected to external ring main/wet riser/down comer) | 1 | Each | |
| 1202 | 399 | Providing and fixing gun-metal 4-way fire brigade inlet connection of 4 nos. 63mm dia instantaneous type male coupling with built in check valves and 150mm dia flanged outletand 150 mm dia sluice valve complete with bolts, nuts and rubber insertions as per I.S:904. (to be connected to static tank). | 1 | Each | |
| 1203 | 400 | Providing and fixing 100 mm dia fire brigade suction hose coupling (2 way draw out connection) with nut for female coupling as per I.S:902- 1974 complete with 100mm dia. suction pipe and 100 mm dia foot valve (To be connected to static tank) | 1 | Each | |
| 1204 | 401 | CIVIL WORKS FOR FIRE PROTECTION SYSTEM | |||
| 1205 | 401.01 | Constructing masonry Chamber 120x120x100 cm, inside with 75 class designation brick work in cement mortar 1:5 ( 1 cement : 5 fine sand ) for sluice valve, with C.I.surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation 150 mm foundation concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design. | 5 | Each | |
| 1206 | 401.02 | Providing and laying reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 20mm nominal size) for anchor/thrust blocks, complete including shuttering,centering curing, and reinforcement including removal of shuttering complete. | 4 | Cum | |
| 1207 | 401.03 | Providing & fixing M.S. structural work fabricated from standard section e.g. M.S rounds bar, angles, channels, plates including cutting to size, drilling,welding fixing and welding to insert plates in RCC structural members as recommended size of fasteners to RCC slab as directed by engineer-in-charge including cutting and making good the walls, ceilings and floors (for pipe structural supports, U clamps etc.) | 100 | Kg | |
| 1208 | 402 | PORTABLE FIRE EXTINGUISHERS | |||
| 1209 | 403 | Supply and Installation of 'ABC' stored pressure type Dry Chemical Powder (Mono- Ammonium Phosphate ) fire extinguisherwith fixing hangers, hose, brackets, screws to required size etc., complete as per IS:15683. | |||
| 1210 | 403.01 | 6 Kg. Capacity | 10 | Each | |
| 1211 | 403.02 | 50 Kg. Capacity Trolley mounted (with external / discharge cylinder) | 2 | Each | |
| 1212 | 404 | Supply and Installation of CO2 gas type cylindrical shape fire extinguisherwith fixing hangers, hose, brackets, screws to required size etc., complete as per IS:15683 - wall mounted type. (a) 4.5 Kg. Capacity | 10 | Each | |
| 1213 | 405 | Supply and Installation of CO2 type cylindrical shape fire extinguisher with hose and all required accessories, complete as per IS:2878 - trolley mounted type for portable use. (a) 22.5 Kg. Capacity | 2 | Each | |
| 1214 | 406 | Supply and Installation of 9 litres capacity water type extinguishers with CO2 gas cartridge with fixing hangers, hose, brackets, screws to required size etc., complete as per IS:15683 -Wall mounted type | 10 | Each | |
| 1215 | 407 | Supply and Installation of Aquous Film Forming Foam (AFFF) media cylindrical shape fire extinguisher with gas cartridge, hose and all required accessories, complete as per IS:13386 - trolley mounted type for portable use. (a) 50 Liters Capacity | 2 | Each | |
| 1216 | 408 | Providing and Fixing 3 Nos. G.I. sand buckets painted \"Red Color\" complete with G.I. stand duly painted \"Red Color\" of suitable size to hang 3 Buckets at a time as per required specifications. | 4 | Each | |
| 1217 | 409 | SITC of AUTOMATIC SPRINKLER SYSTEM pipes for Sprinkler System Branches/Headers M.S. Black ERW Heavy grade \"C Class\" piping as per IS: 1239. The pipes being suspended from ceilings by using hi-tech supports complete with necessary specials such as tees,bends, flanges, reducers, etc. Rate quoted shall include for painting of pipe with a coat of primer and two coats of syntheticenamel paint of approved colour/ make for above ground piping as per the NBC / IS Standards and local fire service department requirement omplete including supply and installation of installation of G.I. Rods, clamps , angle and fasteners etc., (M.S. Structuralsupport i. e. MS channel , plates if required, to be paid separately) (Note : Pipes upto and including 50 mm dia shall be threaded joints, 65 mm and above shall be welded joints.) | |||
| 1218 | 409.01 | 150mm dia | 2 | Mtr. | |
| 1219 | 409.02 | 100mm dia | 5 | Mtr. | |
| 1220 | 409.03 | 80mm dia | 35 | Mtr. | |
| 1221 | 409.04 | 65mm dia | 20 | Mtr. | |
| 1222 | 409.05 | 50mm dia | 20 | Mtr. | |
| 1223 | 409.06 | 40mm dia | 15 | Mtr. | |
| 1224 | 409.07 | 32mm dia | 25 | Mtr. | |
| 1225 | 409.08 | 25mm dia | 100 | Mtr. | |
| 1226 | 410 | Providing, fixing, and testing of 15mm dia. Chrome finished sprinkler head with standard response quartz bulb and to operate at 68°C (of Min K-Factor 5.6) complete as per given specifications. (UL Listed/FM Approved) (a) | 50 | Each | |
| 1227 | 411 | Extra over on above sprinkler item for providing chrome finished Rosette plate with twin - piece recessed escutcheon plate, UL Listed / FM Approved, suitable for 15 mm size sprinklers. | 50 | Each | |
| 1228 | 412 | Supply and Installation of M.S. cabinet (size 600x450x150mm) fabricated from 16 gauge M.S. sheet with full front glass door and locking arrangement with suitable shelves for keeping spare sprinklers and one no. spanner properly fixed. Cabinet painted with enamel paint of approved shade. | 1 | Each | |
| 1229 | 413 | Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finish with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. (For Drain Valves). (a) 50 mm dia | 1 | Each | |
| 1230 | 414 | Providing and fixing 25mm dia inspecting and testing assembly with stainless steel steel isolation valve, stainless steel steel sight glass bypass valve and connected to line drain as per attached sketch. | 1 | Each | |
| 1231 | 415 | Providing and fixing electrically operated flow indicating switches/ water flow detectors for indicating water flow in sprinkler branch line consisting of NEMA 4 rated enclosure for vertical/horizontal mounting, to be installed as per manufacturer specifications in an accessible location as per site, complete including wiring to monitor modules as per instructions of the engineer-in-charge, for the below pipe sizes. 100 mm Dia. | 1 | Each | |
| 1232 | 416 | Providing, fixing, testing & commissioning of installation 100 mm dia control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases,\nstrainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : | 1 | Each | |
| 1233 | 417 | FIRE FIGHTING PUMPS Fire Pumps & Accessories Supplying, installation, testing & commissioning of electric driven fire pumps suitable for automatic operation consisting of the following (as per specification). Horizontal split casing single/ multistage, single/ multioutlet pumping set complete with bronze impeller with C.I. body, SS shaft and sleeve and connected by a flexible coupling, coupling gaurd to a tatally enclosed fan cooled squirrel cage induction motor Mounted on common bed plate of fabricated mild steel channel with cushy foot mounting with all pump accessories complete as per specification including pressure gauges, mechanical seal, lubricated grease bearing . Motor to be suitable for 415V, 50Hz, AC supply of required H.P (or as per pump efficiency) rating for the above pumps. Motor shall accept +/- 10% variation in voltage and +/- 3% variation in frequency. Suitable reinforcement cement concrete pump foundation of 1:2:4 ratio (1 cement: 2 fine aggregate: 4 coarse sand) complete as per requirements including foundation bolts, washers as required. foudation shall be finished with a coat of neat cement with 50x50x3 mm thick M.S. angle edging and foundation shall be painted with enamel paint. | |||
| 1234 | 417.01 | Main fire Pump Type : Horizontal Split casing centrifugal suction type Speed (rpm) : 1450 ,Capacity : 2280 lpm, Head : 70 m | 1 | Set | |
| 1235 | 417.02 | Jockey Pump Type : Horizontal mounted centrifugal End suction type. Speed (rpm) : 2900, Capacity : 180 lpm, Head : 70 m | 1 | Set | |
| 1236 | 418 | Diesel Engine Driven Fire Pump Supply, Installation, Testing and Commissioning of diesel engine driven stand by pump suitable for automatic operation consisting of the following (as per specification)\n Horizontal split casing single/ multistage, single/ multioutlet pumping set with CI body, bronze impleller, SS Shaft and sleeve and mechanical seal and connectedby means of a flexible coupling , coupling gaurd ,to a water cooled diesel engine developing required BHP for the above pump mounted on common bed plate of fabricated mild steel channel with cushy foot mounting with all pump accessories, diesel engine starting panel for starting of the lead acid 24V, 180 AH (including one spare battery) and battery charger as per specification. Rate shall also include Exhaust pipe ( with properly insulation) of required length and size to discharge exhaust gases externallyn as per norms with supporting structure for exhuast stack, with muffler, day oil tank of 200 ltrs capacity with first charge and hand pump set, including all internal cabling /piping as required for commissioning. Fuel tank shall be of 4mm thick sheet, factory made and shallhave indication of low fuel switch, fuel level indicator, shut off nozzle and audiable alarm in engine panel. Suitable reinforcement cement concrete pump foudation of 1:2:4 ratio (1 Cement: 2 Coarse Sand: 4 Coarse Aggregate) including foundation bolts, washers as required. Foundationshall be finished with a coat of neat cement with 50x50x3mm thick M.S angle edging and foundation shall be painted with enamel paint. Type : Horizontal split casing centrifugal suction type. Capacity 2280 LPM, Head : 70 m, RPM : 1600 (pump and engine),Mover : Diesel Engine, Material of Construction: Shaft & Sleeve : S.S.Impeller : Bronze Bearing : Grease, lubricated Seal - Mechanical seal. | 1 | Set | |
| 1237 | 419 | Terrace Fire Pump Supply, Installation,Testing and Commissioning of electric driven Terrace Pump complete in all respect Horizontal type ,multistage, centrifugal split casing pump of cast iron, body & bronze impeller with stainless steel steel steel shaft, mechanical seal and flow of required flow at 35 M head conforming to IS 1520. Suitable HP SQ cage induction motor TEFC type suitable for operation on 415 volts , 3 phase 50 Hz .AC with IP 55 class of protection for enclosure, horizontalfoot mountedtype with Class- 'F' insulation, conforming to IS:325. M.S fabricated Common base plate, coupling, coupling guard, foundation bolts etc .as required . 900 lpm at 35 Meter head | 1 | Set | |
| 1238 | 420 | Fabrication, supply, Insallation testing & commissioning of Electrical ontrol panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank reatment process, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for Terrace booster pump as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required. Item include required electrical cable from motor to panel , panel to ressure switch for terrace fire pump for automatic operation and necessary interlocking. A- One no.32 A, 36kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, auto/manual/OFF operation ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps and pot. Free contact for monitoring of pump status on remote terminal) B-INCOMING:63A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps OUTGOING: Three no.32 A, 36kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, auto/manual/OFF operation ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps and pot. Free contact for monitoring of pump status on remote terminal) C-INCOMING: 63A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps OUTGOING: Two no.32 A, 36kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, auto/manual/OFF operation ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps and pot. Free contact for monitoring of pump status on remote terminal) | 1 | Set | |
| 1239 | 421 | Providing motor control centres fabricated from 1.6 / 2 mm thick M.S. sheet with powder coated finish.The control panels should be comparable with H.P. of the motor as specified. Panel for Fire Pumps Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required INCOMING: 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps\nSet of Copper Bus Bar 300A OUTGOING ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps and pot. Free contact for monitoring of pump status on remote terminal) 02 nos. 32A MCCB having ON/OFF/Trip indication and Ammeter with selector switch Main Fire Pump 125 A, 50kA TPN CCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with verload protection, current sensing type single phase preventor complete with all cceessories and internal wiring required for automatic operation, auto/manual/OFF operation Jockey Pump \n63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with oerload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, auto/manual/OFF operation DIESEL ENGINE CONTROL Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode\nIndicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication\nboost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller\nDesigning, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification i) All interconnecting power & control wires/cables suitable size within the panel . (All for above from items complete set, the shop drawing to be prepared and approved before fabrication) | 1 | Set | |
| 1240 | 422 | Pressure Vessel for Fire Pump Supply, Installation, Testing & Commissioning double flanged vertical air vessel fabricated from 10mm M.S. plate with dished ends from 10mm M.S. plate, outside with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality and sufficient number of pressure switches, air release valve, tripod type stand, pressure gauge with ball valve, drain ball valve of 50mm dia with 2.0 meter long GI (Heavy Duty ) piping complete as required and all other required accessories to operate commonly main fire pump, diesel fire pump and Jockey pump at drop of pressure, automatically at required pressure setting; Recommended dia. : 450 mm Height of shell : 2000 mm Working pressure : 12 Kg/Sq.cm Test Pressure : 18 Kg/Sq.cm | 1 | Each | |
| 1241 | 423 | Supplying and fixing of following powder coated perforated type cable tray system including fittings and accessiores on existing structural supports, fabricated from min. 2mm thick CRCA MS sheets inluding the cost of powder coatings of approved shade of min. 50 micron film thickness on MS surface cleaned and perepared with 7 tank process and including the cost of provinding loop earthing with 2 nos. 25mm x 6mm GI earth strips complete as per specifications and inluding the cost of approved arrangement of cable tray hangers fabricated from galvanized MS angles/ flats/rods including jointg the steel section of the suupport arrangement with nuts and bolts/welding and including securing the support to the structuralceiling by dash fasteners etc. complete with spacing of 600mm for 900mm/1200mm and 750mm for lower sizes, as required, and as below. | |||
| 1242 | 423.01 | 300mm x50mmx50mm trays | 50 | Mtr. | |
| 1243 | 423.02 | 150mmx50mmx50mm trays | 50 | Mtr. | |
| 1244 | 423.03 | Supplying and laying of 25 mm X 4 mm GI strip for Earthing, in slab/wall/ foor including connections as per specification and /or as per direction of Project in-charge. | 100 | Mtr. | |
| 1245 | 424 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. | |||
| 1246 | 424.01 | 200mm dia | 3 | Each | |
| 1247 | 424.02 | 150mm dia | 1 | Each | |
| 1248 | 424.03 | 100mm dia | 1 | Each | |
| 1249 | 424.04 | 80mm dia | 1 | Each | |
| 1250 | 425 | Providing and fixing flanged flexible connectors ( expantion bellows) in SS 304 braiding, of rating PN 1.6 or equivalent, to provide stress relief for suction/deliveryof pumps, complete with standard flanges, nuts, bolts etc. | |||
| 1251 | 425.01 | 200mm dia | 4 | Each | |
| 1252 | 425.02 | 150mm dia | 1 | Each | |
| 1253 | 425.03 | 100mm dia | 1 | Each | |
| 1254 | 425.04 | 80mm dia | 2 | Each | |
| 1255 | 426 | Providing and fixing Pressure gauge (0-14 Kg/Cm2) with necessary ball / isolation valve and fittings such as tees, elbows and painting and supports etc. complete. | |||
| 1256 | 426.01 | 100mm dia | 8 | Each | |
| 1257 | 427 | Providing and fixing pressure switch (for operation at 0-15 Kg./ sqcm) with required fittings and accessories complete with test/drain valve. | |||
| 1258 | 427.01 | Standard type | 3 | Each | |
| 1259 | 428 | Providing and fixing heavy duty copper armored cables 1.1 KV grade including necessary support clamps at ceiling level / cable tray and connection lugs and double compression glands,complete in all respects. | |||
| 1260 | 428.01 | Control cable 6 core 1.5 Sq.mm | 50 | Mtr. | |
| 1261 | 428.02 | Control cable 4 core 1.5 Sq.mm | 10 | Mtr. | |
| 1262 | 428.03 | Control cable 2 core 1.5 Sq.mm | 50 | Mtr. | |
| 1263 | 429 | Providing and fixing heavy duty Aluminum / copper armored cables 1.1 KV grade including necessary support clamps at ceiling level and cable tray, connection lugs and double compression glands, complete in all respects. | |||
| 1264 | 429.01 | Power cable 4 core 10 Sq.mm copper cable | 100 | Mtr. | |
| 1265 | 429.02 | Power cable 3 core 10 Sq.mm copper cable | 25 | Mtr. | |
| 1266 | 429.03 | Power cable 3 core 70 Sq.mm Aluminium cable | 60 | Mtr. | |
| 1267 | 430 | Hydrotesting of installed pipeline at site including rectification of any defects / leakage observed during the test. | 2 | Set | |
| 1268 | 431 | Obtaining CCOE Approval for installed one no. 2000KVA DG Set and one no. underground 20KL Bulk oil tank from Authority having jurisdiction. This includes preparation of drawing, preparation and submission of documents to authority, liasoning, coordination to other party / contractor etc. | 1 | Lot | |
| 1269 | 432 | Obtaining Statutory Approval from Authority having juridiction for fire and safety clearance (NOC from fire department) and Gram panchayat for all 21 buildings, as per norms. This includes preparation of drawing, preparation and submission of documents to authority, liasoning, coordinating to other party / contractor etc. | 1 | Lot | |
| 1270 | 433 | Obtaining Statutory Approval from Authority pertaining to buildings having height more than 30 metres as per MP Land Development Rules 2012, as per norms. This includes preparation of drawing, preparation and submission of documents to authority, liasoning, coordinating to other party / contractor etc. | 1 | Lot |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
