Toilet Renovation Works In Ground Floor At Block C
Tender Value
1.62 Lakhs
Estimated cost
Bid Submission
08 Jun 2021
0 days left
EMD
2500
Bank guarantee accepted
Document Fee
406
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
RCC-TVM → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Toilet Renovation Works In Ground Floor At Block C
BOQ
| Name of Work: TOILET RENOVATION WORKS IN GROUND FLOOR AT BLOCK -C | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL AND PLUMBING/WATERLINE WORKS | |||
| 2 | 1.01 | Dismantling tile work in walls laid in cement grout/glue including stacking material within 50 meters lead.\nFor the thickness of tiles 10 mm to 25 mm | item1 | 39.143 | sqm |
| 3 | 1.02 | Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:\nOf area 3 sq. metres and below | item2 | 3 | each |
| 4 | 1.03 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.\nFor thickness of tiles 10 mm to 25 mm | item3 | 8.891 | sqm |
| 5 | 1.04 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.\nNominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | item4 | 1.78 | cum |
| 6 | 1.05 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | item5 | 11 | sqm |
| 7 | 1.06 | 12 mm cement plaster finished with a floating coat of neat cement of mix:\n1:3 ( 1 cement : 3 fine sand) | item6 | 4.4 | sqm |
| 8 | 1.07 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:\n1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | item7 | 1.889 | cum |
| 9 | 1.08 | Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | item8 | 27.2 | sqm |
| 10 | 1.09 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. | item9 | 6.822 | sqm |
| 11 | 1.1 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | item10 | 7.041 | sqm |
| 12 | 1.11 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:\nWater thinnable cement primer | item11 | 7.041 | sqm |
| 13 | 1.12 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.\nOne coat | item12 | 29.041 | sqm |
| 14 | 1.13 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.\nTwo coats | item13 | 12 | sqm |
| 15 | 1.14 | Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:\n100x10 mm | item14 | 2 | Nos |
| 16 | 1.15 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:\n125 mm | item15 | 2 | Nos |
| 17 | 1.16 | Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete | item16 | 0.325 | cum |
| 18 | 1.17 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.\nIn cement mortar | item17 | 1.485 | cum |
| 19 | 1.18 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | item18 | 5 | metre |
| 20 | 1.19 | Providing and fixing to existing door frames.\n30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge. | item19 | 1.8 | sqm |
| 21 | 1.2 | Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete | item20 | 1 | each |
| 22 | 1.21 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge. a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | item21 | 6 | sqm |
| 23 | 1.22 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | item22 | 11 | kg |
| 24 | 1.23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:\nTwo or more coats on new work | item23 | 11 | sqm |
| 25 | 1.24 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:\nW.C. pan with ISI marked white solid plastic seat and lid | item24 | 1 | each |
| 26 | 1.25 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:\nWhite Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brass pillar taps | item25 | 2 | each |
| 27 | 1.26 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | item26 | 2 | each |
| 28 | 1.27 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms | item27 | 2 | each |
| 29 | 1.28 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms | item28 | 1 | each |
| 30 | 1.29 | Providing and fixing SS grating with rim including setting in the floor with white cement mortar and making good the floor (Chilli make) 125mm dia | item29 | 3 | each |
| 31 | 1.3 | Providing and fixing PVC floor trap self-cleansing design with or without vent arm complete including cutting and making good the walls and floors,65mm dia inlet 100mm dia outlet | item30 | 3 | each |
| 32 | 1.31 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:\n100 mm diameter | item31 | 1 | each |
| 33 | 1.32 | Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.\n15 mm nominal bore | item32 | 1 | each |
| 34 | 1.33 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.\n15 mm nominal bore | item33 | 1 | each |
| 35 | 1.34 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931\n15 mm nominal bore | item34 | 3 | each |
| 36 | 1.35 | Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. | item35 | 1 | each |
| 37 | 1.36 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 6Kgf/cm2 | item36 | 6 | metre |
| 38 | 1.37 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 | item37 | 3 | metre |
| 39 | 1.38 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 | item38 | 6 | metre |
| 40 | 1.39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.\n20 mm nominal outer dia pipes | item39 | 10 | metre |
| 41 | 1.4 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.\n32 mm nominal outer dia pipes | item40 | 3 | metre |
| 42 | 1.41 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\n32 mm nominal bore | item41 | 1 | each |
| 43 | 1.42 | Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms. | item42 | 1 | each |
AI Tender Summary
Tender Timeline
Jun 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 08, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 10, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender