Toilet Renovation Works In The Palliative Ward
Tender Value
2.36 Lakhs
Estimated cost
Bid Submission
08 Jun 2021
0 days left
EMD
3600
Bank guarantee accepted
Document Fee
592
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
RCC-TVM → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Toilet Renovation Works In The Palliative Ward
BOQ
| Name of Work:TOILET RENOVATION WORKS IN THE PALLIATIVE WARD | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL AND PLUMBING/WATERLINE WORKS | |||
| 2 | 1.01 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.\nNominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | item1 | 1.59 | cum |
| 3 | 1.02 | Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:\nOf area 3 sq. metres and below | item2 | 3 | each |
| 4 | 1.03 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.\nFor thickness of tiles 10 mm to 25 mm | item3 | 10.56 | sqm |
| 5 | 1.04 | Dismantling tile work in walls laid in cement grout/glue including stacking material within 50 meters lead.\nFor the thickness of tiles 10 mm to 25 mm | item4 | 47.52 | sqm |
| 6 | 1.05 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | item5 | 32.67 | sqm |
| 7 | 1.06 | 12 mm cement plaster finished with a floating coat of neat cement of mix:\n1:3 ( 1 cement : 3 fine sand) | item6 | 3.6 | sqm |
| 8 | 1.07 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:\n1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | item7 | 1.05 | cum |
| 9 | 1.08 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification . | item8 | 3 | kg |
| 10 | 1.09 | Extra for concrete work in superstructure above V level for each four floors or part thereof. | item9 | 1.05 | cum |
| 11 | 1.1 | Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | item10 | 43.68 | sqm |
| 12 | 1.11 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. | item11 | 10.56 | sqm |
| 13 | 1.12 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | item12 | 7.02 | sqm |
| 14 | 1.13 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:\nWater thinnable cement primer | item13 | 7.02 | sqm |
| 15 | 1.14 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.\nOne coat | item14 | 270 | sqm |
| 16 | 1.15 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.\nTwo coats | item15 | 19.5 | sqm |
| 17 | 1.16 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door fame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in Charge. | item16 | 11.101 | metre |
| 18 | 1.17 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded /sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer -in-charge, manufacture's specification & drawing.\n30 mm thick plain PVC door shutters | item17 | 5.04 | sqm |
| 19 | 1.18 | Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:\n100x10 mm | item18 | 6 | nos |
| 20 | 1.19 | Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour and shade, with necessary screws bolts, but nut and washers etc. complete. | item19 | 3 | nos |
| 21 | 1.2 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:\n125 mm | item20 | 6 | nos |
| 22 | 1.21 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge | item21 | 3 | nos |
| 23 | 1.22 | Dismantling of flushing cistern of all types (C.I. / PVC/ Vitrous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead | item22 | 3 | each |
| 24 | 1.23 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:\nW.C. pan with ISI marked white solid plastic seat and lid | item23 | 3 | each |
| 25 | 1.24 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:\nWhite Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brass pillar taps | item24 | 3 | each |
| 26 | 1.25 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | item25 | 3 | each |
| 27 | 1.26 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms | item26 | 3 | each |
| 28 | 1.27 | Providing and fixing SS grating with rim including setting in the floor with white cement mortar and making good the floor (Chilli make) 125mm dia (Lowest retail price not less than 120/each. | item27 | 6 | each |
| 29 | 1.28 | Providing and fixing PVC floor trap self-cleansing design with or without vent arm complete including cutting and making good the walls and floors,65mm dia inlet 100mm dia outlet | item28 | 6 | each |
| 30 | 1.29 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931\n15 mm nominal bore | item29 | 9 | each |
| 31 | 1.3 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:\n100 mm diameter | item30 | 3 | each |
| 32 | 1.31 | Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.\n15 mm nominal bore | item31 | 3 | each |
| 33 | 1.32 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.\n15 mm nominal bore | item32 | 3 | each |
| 34 | 1.33 | Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | item33 | 3 | nos |
| 35 | 1.34 | Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | item34 | 3 | nos |
| 36 | 1.35 | Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | item35 | 3 | nos |
| 37 | 1.36 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 6Kgf/cm2 | item36 | 6 | metre |
| 38 | 1.37 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 | item37 | 9.9 | metre |
| 39 | 1.38 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 | item38 | 3.901 | metre |
| 40 | 1.39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.\n20 mm nominal outer dia pipes | item39 | 30 | metre |
| 41 | 1.4 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.\n32 mm nominal outer dia pipes | item40 | 12 | metre |
| 42 | 1.41 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\n32 mm nominal bore | item41 | 3 | each |
AI Tender Summary
Tender Timeline
Jun 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 08, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 10, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender