Construction Of Remaining Work Of Fire Station Pindra Distt . Varanasi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Jun 2021
0 days left
EMD
7 Lakhs
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
PINDRA → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Remaining Work Of Fire Station Pindra Distt . Varanasi
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 31-May-2021 | 655/G-6/09 DT. 31.05.2021 | Fee | 11-Jun-2021 |
BOQ
| Name of Work: CONSTRUCTION OF REMAINING WORK OF FIRE STATION, PINDRA, VARANASI. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation in trenches for foundations and pipes cables etc in ordinary soil (loan clay or sand) including lift upto 1.5 m, lead upto 50 m and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer- in- charge with in a lead of 50m .(Including royalty). | BI01010001010000000000000515BI0100001124 | 1015 | CUM |
| 2 | 2 | Filling of carted earth including supply of necessary quantity of earth from a distance not excluding 8km from the site of work and including watering dressing etc. rate to include cost of all materials, labour and T&P etc.required for proper completion of the work. | BI01010001010000000000000515BI0100001125 | 491.34 | CUM |
| 3 | 3 | Sand filling in plinth including supply of necessary quantity of sand from a distance not excluding 8km from the site of work and including watering dressing etc. rate to include cost of all materials, labour and T&P etc.required for proper completion of the work. | BI01010001010000000000000515BI0100001126 | 118.06 | CUM |
| 4 | 4 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 stone ballast 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. | BI01010001010000000000000515BI0100001127 | 190.8 | CUM |
| 5 | 5 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 5 liters/sqm | BI01010001010000000000000515BI0100001129 | 840.12 | SQM |
| 6 | 6 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. | BI01010001010000000000000515BI0100001130 | 127.16 | SQM |
| 7 | 7 | R.c.c. work with cement approved coarse sand and 2 cm. (3/4\") guage approved stone ballast in the proportion 1:1.5:3,(1cement :1.5corse sand 3 grit) in lintels of doors and windows excluding supply of reinforcement and its fixing and bending but including its fixing and binding the same necessary with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. The rate excludes making of drip course which shall be paid extra excluding GST.PWD-283 | BI01010001010000000000000515BI0100001131 | 62.9 | CUM |
| 8 | 7.1 | Same As Above but for F.F. | BI01010001010000000000000515BI0100001132 | 25.16 | CUM |
| 9 | 7.2 | Same As Above but for S..F. | BI01010001010000000000000515BI0100001133 | 25.16 | CUM |
| 10 | 7.3 | Same As Above but for MUMTY | BI01010001010000000000000515BI0100001134 | 1.16 | CUM |
| 11 | 8 | As in item No. 7 above but for slabs (Using 1:1.5:3 Mix concrete) | BI01010001010000000000000515BI0100001135 | 117.94 | CUM |
| 12 | 8.1 | Same As Above but for F.F. | BI01010001010000000000000515BI0100001136 | 117.94 | CUM |
| 13 | 8.2 | Same As Above but for S..F. | BI01010001010000000000000515BI0100001137 | 117.94 | CUM |
| 14 | 8.3 | Same As Above but for MUMTY | BI01010001010000000000000515BI0100001138 | 6.12 | CUM |
| 15 | 9 | As in item No 7 but for the lighter beams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete) | BI01010001010000000000000515BI0100001139 | 6.44 | CUM |
| 16 | 9.1 | Same As Above but for F.F. | BI01010001010000000000000515BI0100001140 | 6.44 | CUM |
| 17 | 9.2 | Same As Above but for S..F. | BI01010001010000000000000515BI0100001141 | 6 | CUM |
| 18 | 9.3 | Same As Above but for MUMTY | BI01010001010000000000000515BI0100001142 | 2.48 | CUM |
| 19 | 10 | As in item No. 7 but in R.C.C. Raft foundation and footing with approved stone ballast. (Using 1:1.5:3 Mix concrete) | BI01010001010000000000000515BI0100001143 | 3.96 | CUM |
| 20 | 11 | As in item No. 7 above but in R.C.C. columns in 1:1.5:3 having strength not less than M-20. | BI01010001010000000000000515BI0100001144 | 2.54 | CUM |
| 21 | 11.1 | Same As Above but for F.F. | BI01010001010000000000000515BI0100001145 | 1.34 | CUM |
| 22 | 11.2 | Same As Above but for S..F. | BI01010001010000000000000515BI0100001146 | 1.34 | CUM |
| 23 | 12 | Class 150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001147 | 428.14 | CUM |
| 24 | 13 | Same as Item No. 12 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12cms. | BI01010001010000000000000515BI0100001148 | 314.02 | CUM |
| 25 | 13.1 | Same As Above but for F.F. | BI01010001010000000000000515BI0100001149 | 314.02 | CUM |
| 26 | 13.2 | Same As Above but for S..F. | BI01010001010000000000000515BI0100001150 | 314.02 | CUM |
| 27 | 13.4 | Same As Above but for MUMTY | BI01010001010000000000000515BI0100001151 | 16.04 | CUM |
| 28 | 14 | Same as Item No. 12 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below. | BI01010001010000000000000515BI0100001152 | 22.98 | CUM |
| 29 | 14.1 | Same As Above but for F.F. | BI01010001010000000000000515BI0100001153 | 22.98 | CUM |
| 30 | 14.2 | Same As Above but for S..F. | BI01010001010000000000000515BI0100001154 | 22.98 | CUM |
| 31 | 14.3 | Same As Above but for MUMTY | BI01010001010000000000000515BI0100001155 | 35.52 | CUM |
| 32 | 15 | Providing & laying \"brick koba\" 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gap of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth and top mashed false square 30 cmx30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and juction and corner shall be rounded by brick ballast cement and coarse sand and masonry coba with top finished plaster mixing with acetic water priifing compound @ 2% by weight & including supply of all materials labour T&P etc. complete for proper completion of work. | BI01010001010000000000000515BI0100001156 | 840.12 | SQM |
| 33 | 16 | Supply and fixing of flush doors commercial quality conforming to I.S.2202 Part I (1983) including fixing of wooden cleats and stoppers and including ixing and adjustment of hinges, bolts,locks, handle, springs and other fittings with necessary screws to be supplied departmentally 32 mm thick | BI01010001010000000000000515BI0100001158 | 337.06 | SQM |
| 34 | 17 | Supply and fixing of 32 mm thick flush doors commercial quality conforming to I.S.2202 Part I (1983) including fixing of wooden cleats and stoppers and including ixing and adjustment of hinges, bolts,locks, handle, springs and other fittings with necessary screws to be supplied departmentally. & Providing & Fixing both side decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick | BI01010001010000000000000515BI0100001160 | 75.6 | SQM |
| 35 | 18 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood | BI01010001010000000000000515BI0100001161 | 143.64 | SQM |
| 36 | 19 | Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction\nof the Engineer-in-Charge | BI01010001010000000000000515BI0100001163 | 86.18 | SQM |
| 37 | 20 | Mild steel or iron work of small sizes and sections such and holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. | BI01010001010000000000000515BI0100001164 | ||
| 38 | 20.1 | Fabrication of hold fast for door chaukhats and windows. | BI01010001010000000000000515BI0100001165 | 669.76 | KG |
| 39 | 20.2 | Fabrication of M.S. Grill | BI01010001010000000000000515BI0100001166 | 4145.26 | KG |
| 40 | 20.3 | Fabrication of M.S. Z-section window and ventilators | BI01010001010000000000000515BI0100001167 | 4192.5 | KG |
| 41 | 20.4 | Fabrication of M.S. Angle iron 40x40x5 mm | BI01010001010000000000000515BI0100001168 | 3525.44 | KG |
| 42 | 21 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 12 mm mild steel U beading | BI01010001010000000000000515BI0100001169 | 118.56 | SQM |
| 43 | 22 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :25 mm dia | BI01010001010000000000000515BI0100001170 | 467.88 | RMT |
| 44 | 23 | Fixing of M.S. Chaukhats | BI01010001010000000000000515BI0100001171 | ||
| 45 | 23.1 | (a) Door chaukhats | BI01010001010000000000000515BI0100001172 | 218 | NOS |
| 46 | 23.2 | (b) Window chaukhats up to 1.5 sqm | BI01010001010000000000000515BI0100001173 | 56 | NOS |
| 47 | 23.3 | (c) Ventilator chaukhats | BI01010001010000000000000515BI0100001174 | 48 | NOS |
| 48 | 24 | Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. | BI01010001010000000000000515BI0100001175 | 509.52 | QTL. |
| 49 | 25 | 15 mm thick plaster in 1:4 cement & course sand on outer wall below Ground level & inner wall below plinth level in 15 cm width. | BI01010001010000000000000515BI0100001176 | 190.38 | SQM |
| 50 | 26 | 12 mm cement plaster of mix : (1)1 cement : 6 c. sand | BI01010001010000000000000515BI0100001177 | 3775.97 | SQM |
| 51 | 27 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) | BI01010001010000000000000515BI0100001179 | 7972.3 | SQM |
| 52 | 28 | Making groove 10x12 mm widex 8 mm deep in plaster of the wall or in ceilling vertically or horizontally as required. | BI01010001010000000000000515BI0100001181 | 6685.84 | RM |
| 53 | 29 | 25 mm thick Cement concrete floor with cement approved coarse sand and 2cm. Graded approved stone ballast laid in planels finished with 3mm (1/8\") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8 cm. (3\") local sand and brick ballast 4 cm. gause in proportion of 1:4:8 and removing any giving then a uniform finish,including supply of all materials, labour, T&P etc. required for proper completion of the work. But without base concrete. | BI01010001010000000000000515BI0100001183 | 301.77 | SQM |
| 54 | 30 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsGranite of any colour and shade Area of slab upto 0.50 sqm | BI01010001010000000000000515BI0100001184 | 91.78 | SQM |
| 55 | 31 | Supply and fixing 6mm (1/4\") thick china white glazed tilesin flooring or in skirting or dado laid with 1:3 cement and approved course sand mortal finished with white cement slurry jointing and polished complete including supply of all materials labour T & P etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001185 | 693 | SQM |
| 56 | 32 | Providing and laying vitrified floor tiles Kajaria KERRO Brand or equivalent brand of quality in different size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand)including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001186 | 2232.6 | SQM |
| 57 | 33 | Providing and laying vitrified floor tiles Kajaria KERRO Brand or equivalent brand of quality in different size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand)including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001187 | 416.84 | SQM |
| 58 | 34 | Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001188 | 733.64 | SQM |
| 59 | 35 | Same as item No. 34 above but on new wood surface. | BI01010001010000000000000515BI0100001189 | 674.12 | SQM |
| 60 | 36 | Finishing walls with water-proofing on cement paint of approved make such as super snowcem, durrocem, robiacem, guttucem supercem quality and of required shade on undecorated wall surfaces (two coat) overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials. | BI01010001010000000000000515BI0100001190 | 3800.9 | SQM |
| 61 | 37 | White washing three coat including supply of all materials, labour and tools and plants etc. required for completion of the work. | BI01010001010000000000000515BI0100001191 | 10356.3 | SQM |
| 62 | 38 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : With 4.0 mm thick glass panes. | BI01010001010000000000000515BI0100001192 | 118.56 | SQM |
| 63 | 39 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm | BI01010001010000000000000515BI0100001193 | 218 | NOS |
| 64 | 40 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :250x10 mm | BI01010001010000000000000515BI0100001194 | 708 | NOS |
| 65 | 41 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125 mm | BI01010001010000000000000515BI0100001195 | 596 | NOS |
| 66 | 42 | Supply and filling of cinder in sunken in portion of building including breaking into required sizes including supply of all material, labour T&P required for proper completion of the work. | BI01010001010000000000000515BI0100001196 | 99.04 | CUM |
| 67 | 43 | ELECTRICAL WORK: Wiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. | BI01010001010000000000000515BI0100001198 | 516 | Each |
| 68 | 44 | Wiring points for Fan /Fresh air fan (light duty exhaust fan )with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & ceiling rose on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. | BI01010001010000000000000515BI0100001199 | 168 | Each |
| 69 | 45 | Wiring points for Plug with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & socket sheet etc.complete in all respects.as directed including matching colour wash. | BI01010001010000000000000515BI0100001200 | 480 | Each |
| 70 | 46 | Wiring points for Call bell with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type bell push or 2pin socket etc.complete in all respects.as directed including matching colour wash. | BI01010001010000000000000515BI0100001201 | 24 | Each |
| 71 | 47 | Supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm FR PVC insulated 1100 V grade single core multistrand copper conductor cable in PVC conduit pipe partly concealed including supply of all material, labourand T&P etc. required for proper completion of the work as directed by Engineer I/C. | BI01010001010000000000000515BI0100001202 | 4900 | Metre |
| 72 | 48 | Supply and wiring of submain with two number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in 20mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 2.5 Sqmm FR PVC Multistand copper earth contunity wire including colour wash etc. complete in all respects. | BI01010001010000000000000515BI0100001203 | 3300 | Metre |
| 73 | 49 | Supply and wiring of submain 2 number 6 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in 20mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 4.0 Sqmm FR PVC Multistand copper earth contunity wire including colour wash etc. complete in all respects. | BI01010001010000000000000515BI0100001204 | 2700 | Metre |
| 74 | 50 | S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWG MS. Sheet incorporating 10mm dia, M.S. round bar duly bent for supporting fan hanger dully painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C roof before concreting along with supply of all materials,labour. T& Petc. required for proper completion of the work. | BI01010001010000000000000515BI0100001205 | 96 | Nos. |
| 75 | 51 | Supply and fixing of flush/surface mounting distribution boards with additional metal door without MCB complete in all respects. 6 Way TPN | BI01010001010000000000000515BI0100001206 | 24 | Each |
| 76 | 52 | Supply, installation, testing and commissioning of electrical pane, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.2mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. | BI01010001010000000000000515BI0100001207 | ||
| 77 | 52.1 | The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used. All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports. The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section. | |||
| 78 | 52.2 | The minimum clearances between bus bars shall be as follows : Phase to phase - minimum 20mm Phase to neutral-minimum 15mm | BI01010001010000000000000515BI0100001211 | ||
| 79 | 52.3 | Incoming : One (1) No 315A 4 pole MCCB | BI01010001010000000000000515BI0100001214 | ||
| 80 | 52.4 | Metering : One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch., One (1) No. (0-315A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc. One (1) Set of Phase Indication Lamp. | BI01010001010000000000000515BI0100001216 | ||
| 81 | 52.5 | Bus Bar : One (1) No.315 A, TPN aluminimum bus bar of suitable length. | BI01010001010000000000000515BI0100001220 | ||
| 82 | 52.6 | Outgoing : Phase indication lamps on each outgoing to be provided. 100Amps TPN - 3 Nos OR outgoing as per site requirment | BI01010001010000000000000515BI0100001225 | 4 | Set |
| 83 | 53 | Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve 6 - 32 amps.Cat. A | BI01010001010000000000000515BI0100001226 | 144 | Each |
| 84 | 54 | Supply and fixing of power plug with 15 Amp./250 Volt flush type universal switch and 5 pin 15 A/250 V flush type universal socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work. | BI01010001010000000000000515BI0100001227 | 480 | Each |
| 85 | 55 | Supply & fixing of single wall bracket on matching M.D.F.E.G. board base etc. complete in all required. Cat. AA | BI01010001010000000000000515BI0100001228 | 270 | Each |
| 86 | 56 | Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. | BI01010001010000000000000515BI0100001229 | 240 | Each |
| 87 | 57 | Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light complete including tube etc. on surface complete in all respect. | BI01010001010000000000000515BI0100001230 | ||
| 88 | 57.1 | 1 X 22 W CAT-AAA | BI01010001010000000000000515BI0100001231 | 120 | Each |
| 89 | 57.2 | 2 X 22 W CAT-AAA | BI01010001010000000000000515BI0100001232 | 12 | Each |
| 90 | 58 | Supply of Ceilling Fans with fan motor of A.C. Permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 abd also comply with IS: 1709/1984 with latest amendment. The rate voltage 220/240 volts, 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball bearing system. | BI01010001010000000000000515BI0100001233 | 96 | Each |
| 91 | 59 | Supply fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. | BI01010001010000000000000515BI0100001234 | 96 | Each |
| 92 | 60 | Supply & erection ofA.C 230/250 Volts,50 Hz exhaust fans including providing m.S bolts,mounting frame and other acessories including connections etc.complete as required 300mm sweep as per directionof E/I Makebajaj,Cromption or Equivalent. | BI01010001010000000000000515BI0100001235 | 72 | Each |
| 93 | 61 | Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge.-Cat. A | BI01010001010000000000000515BI0100001236 | 24 | Each |
| 94 | 62 | Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. | BI01010001010000000000000515BI0100001237 | 6 | Each |
| 95 | 63 | Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects. | BI01010001010000000000000515BI0100001238 | 200 | Metre |
| 96 | 64 | Supply and laying of aluminium conducter PVC insulated armoured served sheathed cables 1100 volts grate at a depth of below ground lvl over a cusion of 75 mm thick sand alround and protected with burnt on side and on top ,On surface the cable run shall be fixed on M.S clamps etc. of suitable size or as directed by E/I complete in all respects,The armouring of the cable shall be properly connected with the earth conductor by clamps atc. | BI01010001010000000000000515BI0100001239 | ||
| 97 | 64.1 | (i) 10 Sq. mm 2core | BI01010001010000000000000515BI0100001240 | 600 | Meter |
| 98 | 64.2 | (ii) 16 Sq. mm 4 core | BI01010001010000000000000515BI0100001241 | 300 | Meter |
| 99 | 64.3 | (iii) 70 Sq. mm 3.5 core | BI01010001010000000000000515BI0100001242 | 200 | Meter |
| 100 | 64.4 | (iv) 120 Sq. mm 3.5 core | BI01010001010000000000000515BI0100001243 | 100 | Meter |
| 101 | 65 | PLUMBING WORK :Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fitting and fixtures completed including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests | BI01010001010000000000000515BI0100001245 | 48 | Nos |
| 102 | 66 | Providing & fixing white viterous china wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting & making good the walls wherever required . Flat back Wash Basin size 550X400 mm with single 15mm C. P. brass pillar tap | BI01010001010000000000000515BI0100001246 | 48 | Nos |
| 103 | 67 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. | BI01010001010000000000000515BI0100001247 | ||
| 104 | 67.1 | 32 mm dia (for wash basin) | BI01010001010000000000000515BI0100001248 | 48 | Nos |
| 105 | 67.2 | 40 mm dia (for sink and urinal) | BI01010001010000000000000515BI0100001249 | 24 | Nos |
| 106 | 68 | Providing & fixing stainless steel AISI 304 (18/8) kitchen sink without drain board as per IS :13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets cutting and making good the walls wherever required.610x510 mm bowl depth 200 mm | BI01010001010000000000000515BI0100001250 | 24 | Nos |
| 107 | 69 | Providing & Fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001251 | 48 | Nos |
| 108 | 70 | S/F of upvc SWR Pipe Type -B confirming to IS -13592 incluiding jointing the pipes with rubber ring lubricant and UPVC SWR Cuplar confirming to IS 14735 also inluiding excavation of treches cutting of walls and holes and repairing of walls , floors and refilling the trenches as before cut including cost of other fittings such as door band, T and YT including supply of all materials labour and t&p required for prper complition of the work. | BI01010001010000000000000515BI0100001252 | ||
| 109 | 70.1 | 110mm dia SWR Pipe | BI01010001010000000000000515BI0100001253 | 720 | Rm |
| 110 | 70.2 | 90mm dia SWR Pipe | BI01010001010000000000000515BI0100001254 | 600 | Rm |
| 111 | 71 | Providing & fixing upvc SWR door bend confirming to IS -14735 110mm dia | BI01010001010000000000000515BI0100001255 | 36 | Nos |
| 112 | 72 | Providing & fixing upvc SWR bend confirming to IS -14735 110mm dia | BI01010001010000000000000515BI0100001256 | 54 | Nos |
| 113 | 73 | Providing & fixing upvc SWR door bend confirming to IS -14735 | BI01010001010000000000000515BI0100001257 | ||
| 114 | 73.1 | 110mm dia | BI01010001010000000000000515BI0100001258 | 36 | Nos |
| 115 | 73.2 | 75 mm dia | BI01010001010000000000000515BI0100001259 | 54 | Nos |
| 116 | 74 | Providing & fixing upvc SWR door Y confirming to IS -14735 | BI01010001010000000000000515BI0100001260 | ||
| 117 | 74.1 | 110mm dia | BI01010001010000000000000515BI0100001261 | 16 | Nos |
| 118 | 74.2 | 75mm dia | BI01010001010000000000000515BI0100001262 | 24 | Nos |
| 119 | 75 | Providing & fixing of upvc SWR cowel confirming to IS -14735 | BI01010001010000000000000515BI0100001263 | ||
| 120 | 75.1 | 110mm dia | BI01010001010000000000000515BI0100001264 | 36 | Nos |
| 121 | 75.2 | 75 mm dia | BI01010001010000000000000515BI0100001265 | 4 | Nos |
| 122 | 76 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. | BI01010001010000000000000515BI0100001266 | 192 | RM |
| 123 | 77 | Providing and fixing of Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, inluding fixing the pipe with clamps at 1 m. spacing . This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. Internal work exposed on wall. Internal work exposed on wall | BI01010001010000000000000515BI0100001267 | ||
| 124 | 77.1 | 20mm nominal outer dia pipes | BI01010001010000000000000515BI0100001268 | 1920 | Rm |
| 125 | 77.2 | 32mm nominal outer dia pipes | BI01010001010000000000000515BI0100001269 | 1620 | Rm |
| 126 | 77.3 | 40mm nominal outer dia pipes | BI01010001010000000000000515BI0100001270 | 1020 | Rm |
| 127 | 77.4 | 50mm nominal outer dia pipes | BI01010001010000000000000515BI0100001271 | 720 | Rm |
| 128 | 78 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (internal work) i) Exposed on wall | BI01010001010000000000000515BI0100001272 | ||
| 129 | 78.1 | a) 32mm dia nominal outer dia pipes | BI01010001010000000000000515BI0100001273 | 1620 | Rm. |
| 130 | 78.2 | a) 25mm dia nominal outer dia pipes | BI01010001010000000000000515BI0100001274 | 1080 | Rm. |
| 131 | 79 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. | BI01010001010000000000000515BI0100001275 | ||
| 132 | 79.1 | a) 15mm dia nominal outer dia pipes | BI01010001010000000000000515BI0100001276 | 864 | Rm. |
| 133 | 79.2 | b) 20mm dia nominal outer dia pipes | BI01010001010000000000000515BI0100001277 | 960 | Rm. |
| 134 | 79.3 | c) 25mm dia nominal outer dia pipes | BI01010001010000000000000515BI0100001278 | 1440 | Rm. |
| 135 | 80 | Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) | BI01010001010000000000000515BI0100001279 | ||
| 136 | 80.1 | 25 mm nominal bore | BI01010001010000000000000515BI0100001280 | 32 | Nos |
| 137 | 80.2 | 32 mm nominal bore | BI01010001010000000000000515BI0100001281 | 32 | Nos |
| 138 | 80.3 | 50 mm nominal bore | BI01010001010000000000000515BI0100001282 | 16 | Nos |
| 139 | 80.4 | 65 mm nominal bore | BI01010001010000000000000515BI0100001283 | 8 | Nos |
| 140 | 81 | Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats). 25 mm nominal bore | BI01010001010000000000000515BI0100001284 | 24 | Nos |
| 141 | 82 | Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions. | BI01010001010000000000000515BI0100001285 | 120 | Nos |
| 142 | 83 | Providing & fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS 8931. | BI01010001010000000000000515BI0100001286 | 48 | Nos. |
| 143 | 84 | Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. | BI01010001010000000000000515BI0100001287 | 72 | Nos. |
| 144 | 85 | Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931. | BI01010001010000000000000515BI0100001288 | 120 | Nos. |
| 145 | 86 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank. 500 litres capacity | BI01010001010000000000000515BI0100001289 | 16000 | ltr |
| 146 | 87 | PART B (NON SCHEDULED ITEMS - AS PER MARKET RATES) Providing 450 mm long C. P. brass towel rail complete with C.P. brass brackets | BI01010001010000000000000515BI0100001290 | 48 | Nos |
| 147 | 88 | Fixing of C. P. brass towel rail | BI01010001010000000000000515BI0100001291 | 48 | Nos |
| 148 | 89 | Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. | BI01010001010000000000000515BI0100001292 | 312 | Nos |
| 149 | 90 | EXTERNAL PLUMBING WORK :- SCHEDULE OF QUANTITIES FOR EXTERNAL SEWERAGE SYSTEM - I : S/F of upvc SWR Pipe Type -B confirming to IS -13592 incluiding jointing the pipes with rubber ring lubricant and UPVC SWR Cuplar confirming to IS 14735 also inluiding excavation of treches cutting of walls and holes and repairing of walls , floors and refilling the trenches as before cut including cost of other fittings such as door band, T and YT including supply of all materials labour and t&p required for prper complition of the work. 150mm dia SWR Pipe | BI01010001010000000000000515BI0100001126 | 270 | M |
| 150 | 91 | Haunching of SWR Pipes with cement concrete in 1:2:4 (1 cement: 2 coarse sand : 4 Stone grit 20mm nominal size) with a complete section of size 300x300mm around the pipe. Including supply of all materials and Labour complete. | BI01010001010000000000000515BI0100001127 | 270 | M |
| 151 | 92 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With FPS bricks of class designation 75 | BI01010001010000000000000515BI0100001128 | ||
| 152 | 92.1 | (i) For Sewer Line | BI01010001010000000000000515BI0100001129 | 16 | Each |
| 153 | 92.2 | Extra for depth of man hole size 90x80 cm | BI01010001010000000000000515BI0100001130 | 4 | metre |
| 154 | 93 | Providing and fixing square mouth S. W. Gully trap grade `A' complete with C.I. grating brick masonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 180 x 150 mm. size P type | BI01010001010000000000000515BI0100001131 | 24 | Nos |
| 155 | 94 | Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design. | BI01010001010000000000000515BI0100001132 | 16 | Each |
| 156 | 95 | Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand ) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks | BI01010001010000000000000515BI0100001133 | 4 | Each |
| 157 | 96 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. | BI01010001010000000000000515BI0100001134 | ||
| 158 | 96.1 | 50mm nominal bore. | BI01010001010000000000000515BI0100001135 | 140 | Rm. |
| 159 | 96.2 | 40mm nominal bore. | BI01010001010000000000000515BI0100001136 | 240 | Rm. |
| 160 | 96.3 | 32mm nominal bore. | BI01010001010000000000000515BI0100001137 | 600 | Rm. |
| 161 | 97 | SAPTIC TANK : Earth work in excavation in trenches for foundations and pipes cables etc in ordinary soil (loan clay or sand) including lift upto 1.5 m, lead upto 50 m and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer- in- charge with in a lead of 50m . | BI01010001010000000000000515BI0100001139 | ||
| 162 | 97.1 | In all kind of soil upto 1.5m depth | BI01010001010000000000000515BI0100001140 | 74.26 | Cum |
| 163 | 97.2 | In all kind of soil upto 1.5m to 3.0m. depth | BI01010001010000000000000515BI0100001141 | 79.22 | Cum |
| 164 | 98 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 stone ballast 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. | BI01010001010000000000000515BI0100001143 | 4.95 | Cum |
| 165 | 99 | Class 150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001144 | 36.95 | Cum |
| 166 | 100 | R.c.c. work with cement approved coarse sand and 2 cm. (3/4\") guage approved stone ballast in the proportion 1:1.5:3,(1cement :1.5corse sand 3 grit) in slab excluding supply of reinforcement and its fixing and bending but including its fixing and binding the same necessary with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works strength of concrete shall not be less than M-20 | BI01010001010000000000000515BI0100001145 | 4.58 | Cum |
| 167 | 101 | Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. | BI01010001010000000000000515BI0100001146 | 360 | Kg |
| 168 | 102 | 15mm cement plaster on rough side of mix 1:4 (1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001147 | 160.66 | Sqm |
| 169 | 103 | Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars. | BI01010001010000000000000515BI0100001148 | 24 | Nos. |
| 170 | 104 | Providing and fixing C.I. tee at the inlet and outlet of septic tank. | BI01010001010000000000000515BI0100001149 | 4 | Nos. |
| 171 | 105 | Providing & fixing 75mm dia vent pipes. | BI01010001010000000000000515BI0100001150 | 2 | Rm. |
| 172 | 106 | Providing & fixing of 75mm dia cast iron terminal guard. | BI01010001010000000000000515BI0100001151 | 2 | No. |
| 173 | 107 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. | BI01010001010000000000000515BI0100001152 | ||
| 174 | 107.1 | M.D. -10- Circular shape 500mm internal diameter | BI01010001010000000000000515BI0100001153 | 4 | No. |
| 175 | 107.2 | L.D. -2.5- Circular shape 450mm internal diameter | BI01010001010000000000000515BI0100001154 | 8 | No. |
| 176 | 108 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks | BI01010001010000000000000515BI0100001155 | 4 | No. |
AI Tender Summary
Tender Timeline
May 31, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 11, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 11, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 11, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender