Hmi/Rnm/Cdc/6/21-22 Provision Of Sheet Cladding And Miscallaneous Work For Stp At Hmi Darjeeling
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Jun 2021
0 days left
EMD
24000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
HMI DARJEELING → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Hmi/Rnm/Cdc/6/21-22 Provision Of Sheet Cladding And Miscallaneous Work For Stp At Hmi Darjeeling
BOQ
| Name of Work: Provision of sheet cladding and miscellaneous work for STP at HMI Darjeeling | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | M & L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1 : 6 | 6 | Cum | |
| 2 | 2 | S&F steel work in tubular trusses, purlins, wall cladding, etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed by Campus Supdt. Make : TATA/JINDAL | 3000 | Kg | |
| 3 | 3 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colur having tensile strength of 550 Mps as in roof covering / cladding to wall, fixed with self tapping screw complete all as directed. Make TATA/JINDAL/DURASHINE | 225 | Sqm | |
| 4 | 4 | M & L rendering 15 mm thick on concrete surface in cement mortar 1:6 on internal wall surfaces. | 50 | Sqm | |
| 5 | 5 | M/L Rendering 20 mm thick in cement mortar 1:4 on concrete surfaces with liquid water proofing compound @ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smooth without using extra cement over roof slab and external wall surfaces complete all as specified and directed . NOTE: water proofing compound shall be measured and paid seperately | 50 | Sqm | |
| 6 | 6 | Supply only liquid water proofing compound. Make : Dr Fixit | 3 | Ltrs | |
| 7 | 7 | M&L for applying two to three mm coat of Birla/ JK wall putty & preparation of surfaces for further treatment and after prepration of surfaces, applying two coats of oil bound distemper over & including a coat of primer on new sufaces complete all as specified and directed. | 50 | Sqm | |
| 8 | 8 | M&L for applying two coats of Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed by Campus Supdt. Make - Asian paint | 50 | Sqm | |
| 9 | 9 | S&F Fe 410 W (Gde E-250 Quality B) framed work as in doors or gates of angle or other section with gusset plate, rails, braces, etc complete drilled for fixing of steel sheeting or other covering , Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and as directed by Campus Supdt. | 450 | Kg | |
| 10 | 10 | S&F Steel window both side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars dovetailed or welded etc complete all as specified and as directed by Campus Supdt. | 8 | Sqm | |
| 11 | 11 | M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. | 30 | Sqm | |
| 12 | 12 | S&F 1.25 mm thick mild steel sheet for eaves gutter, galvanised class 3, half round 180 mm dia with rounded edges,welding etc complete all as specified and as directed by Campus Supdt. | 50 | RM | |
| 13 | 13 | S&F stack clamp out of 50 mm dia by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for eaves gutter complete all as specified and as directed. | 24 | Each | |
| 14 | 14 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall with suitable PVC / GI clamp including bend, elbow , socket etc complete | 36 | RM | |
| 15 | 15 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Campus Supdt. | 3 | Cum | |
| 16 | 16 | M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete. | 120 | KG | |
| 17 | 17 | M&L for form work to rough finished square, rectangular or polygonal concrete surfaces as in sides of columns, pillars, posts, struts,etc complete. | 50 | Sqm | |
| 18 | 18 | M&L for reinforced cement concrete (Nominal mix) type B1 1:2:4, using 20 mm graded stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like any thickness above top of footings including attached pilaster and buttresses complete all as specified and as directed by Campus Supdt. | 10 | Cum | |
| 19 | 19 | M&L for chequered cement concrete coloured tiles 25cmx25cmx25mm thick incl 20mm thick screed bed in CM 1:4 set jointed and pointed in neat cement slurry in floors etc complete. | 75 | Sqm | |
| 20 | 20 | Material and labour for point wiring with 1.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 volts drawn through and including rigid non metallic surface conduit medium grade ISI marked minimum 20mm dia and its accessories complete alongwith 1.5 Sqmm cable but in green colour as continuous earthing wire and connnecting to common earth duy completely concealed. Surface in walls/ceiling roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches, switch socket combinations, fan regulators etc, as required with 3mm thick plastic laminated sheet top cover all as specified and directed for the following points. | |||
| 21 | 21 | (a) One light point controlled by one switch | 3 | Point | |
| 22 | 22 | (b) One ceiling /exhaust fan point controlled by one switch | 3 | Point | |
| 23 | 23 | (c) One three pin socket out let 5 Amp on independents board complete | 3 | Point | |
| 24 | 24 | Material and labour for point wiring with 4.00 sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 volts drawn through and including rigid non metallic surface conduit medium grade ISI marked minimum 20mm size and its accessories complete alongwith 4.00 sqmm cable but in green colour as continuous earthing wire and connnecting to common earth duly completely concealed. surface in walls/ceiling roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for one 3 pin socket out let 15 Amps on independent board with 3mm thick plastic laminated sheet top cover all as specified and directed Note : Necessary PVC, rigid, concealed type junction boxes for identifying junction as required on site directed by Campus Supdt for point wiring with PVC dummy plates shall to be included in quoted. | 3 | Point | |
| 25 | 25 | Supply and fix modular switch 1 way 6 Amp, 240 Volt. Make : Anchor/Havells | 9 | Each | |
| 26 | 26 | Supply and fix modular switch 1 way 16 Amp, 240 Volt. Make : Anchor/Havells | 3 | Each | |
| 27 | 27 | Material and labour ceiling rose surface type bakelite 65x50mm with three terminals complete all as directed. | 3 | Each | |
| 28 | 28 | Supply and fix modular socket outlet 6A 2/3 Pin complete all as directed. | 3 | Each | |
| 29 | 29 | Supply and fix modular socket outlet 16A 2/3 pin complete all as directed. | 3 | Each | |
| 30 | 30 | Supply and fix modular white cover plate with frame 1 module or as per ground reqmt complete all as directed. | 3 | Each | |
| 31 | 31 | Supply and fix modular white cover plate with frame 2 module or as per ground reqmt complete all as directed. | 3 | Each | |
| 32 | 32 | Supply and fix LED tube light fittings 4 feet long 1x20w 230V energy efficient fittings decorative type complete including housing all pre wired with high efficiency electronic driver complete fixed to wall/ceiling including connection by flexible PVC cable with standred copper conductor from ceiling rose to connector of the fittings including LED tube complete all as specified and directed. Make : Havells / Bajaj / Syska | 3 | Each | |
| 33 | 33 | Supply and fix sheet factory made, powder coated MCB DB with bus bar 200 Amps Neutral link, earth bar, double door SPN 2 way 230 Volts all as directed. Make Havells/Legrand | 3 | Each | |
| 34 | 34 | Supply and fix 16 mm dia ISI marked flexible PVC pipe including fittings like bend, elblow, Socket, tee etc for wiring complete all as specified and as directed. | 90 | RM | |
| 35 | 35 | Supply and fix 20 mm dia ISI marked flexible PVC pipe including fittings like bend, elblow, Socket, tee etc for wiring complete all as specified and as directed. | 10 | RM | |
| 36 | 36 | Supply and fix miniature circuit breaker (MCBs) 6 Amp capacity for single pole 240 volt complete all as specified. Make Havells | 3 | Each | |
| 37 | 37 | Supply and fix miniature circuit breaker (MCBs) 16 Amp capacity for single pole complete all as specified. Make Havells | 3 | Each | |
| 38 | 38 | Supply and fix PVC cable tie clip white nylon 200 mm long complete all as specified and as directed. | 1 | Pkt | |
| 39 | 39 | Supply and fix exhaust fan with for protection when not in use silent operation rust proof body and blades with fixing arrangements of size 300mm seeep 1400 rpm including cutting and preparation of hole in brick wall and plaster complete . Make : Havells/Bajaj | 3 | Each | |
| 40 | 40 | Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 1060Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and as directed. | 3 | Each |
AI Tender Summary
Tender Timeline
May 29, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 19, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 22, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender