Providing And Erecting Solar Power Pack System At Primary Health Center Main Hospital Building At Dongarkada Tq. Kalamnuri Dist. Hingoli
Tender Value
22.49 Lakhs
Estimated cost
Bid Submission
04 Jun 2021
0 days left
EMD
23000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalamnuri → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing And Erecting Solar Power Pack System At Primary Health Center Main Hospital Building At Dongarkada Tq. Kalamnuri Dist. Hingoli
BOQ
| Sl. No. | Item Description |
| 1 | Item.No.1) Supplying, installing, testing and commissioning of 10 kWp off gridsolar power pack with GI mounting structure and interconnectingwires / cables along with 24V/12V pure sine wave solar powerinverter (THD<5%), 24V/12V charge controller and 24V/12V C-10rated lead acid battery bank of required capacity and required SPVmodules for battery backup of 6 hrs complete, with 5 years on siteperformance warrantee. Specification no. ESD-RT-OFG |
| 2 | Item.No.2) Supplying & erecting triple pole and neutral distribution board(TPNDB) with door surface/ flush mounted suitable for 3 poleMCCB as incomer & outgoing SP MCB (12 poles) or TP MCBof 4 ways (12 poles) on iron/ GI frame. (vertical busbar type) as perspecification no. SW-SWR/MCBDB1 |
| 3 | Item.No.3)Supplying, erecting & marking TPMCB 40A to 63A in provideddistribution board as per ification no. SW-SWR/MCB |
| 4 | MCCB 3 Pole (5.5.1)Providing & erecting 3 Pole MCCB upto 100A, 415V,with short circuitrating 25 kA (Ics=100% of Icu ),adjustablethermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frameas per specification no. SW-SWR/MCCB |
| 5 | Item.No.5) Supplying, installation & marking of surge arrestor / surgeprotection device at the main distribution board after the incomingbreaker of type 1+2 tested for Imax 100 kA for three phase andneutral as per specification no. CP-SPD |
| 6 | Item.No.6) C.R.C.A. Sheet (6.1.1)Supplying and erecting metal work in CRCA sheet with fabrication ofboxes,panelboards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment andduly powder coated or paintedwith one coat of red lead paint and 2 coats of enamel paint complete. |
| 7 | Item.No.7) Providing & erecting Hot dipped galvanized perforated typecable tray anufactured from 16 swg (1.6 mm thick) GI sheet of150 mm width & 75 mm height complete with necessary couplerplates & hardware in approved manner |
| 8 | Item.No.8) Providing & erecting Hot dipped galvanized cover suitable forperforated type cable tray manufactured from 18 swg (1.2 mmthick) GI sheet of 150 mm width & 20 mm height complete necessary hardware in approved manner |
| 9 | Item.No.9) Providing earthing with galvanized iron earth plate size 60 x 60 x0.6 cm complete with all materials, testing & recording the results asper specification no. EA-EP |
| 10 | Item.No.10) Providing earthing with copper earth plate size 30 x 30 x 0.315 cmcomplete with all materials, testing & recording the results as perspecification no. EA-EP |
| 11 | Item.No.11) Supplying and erecting copper strip of required size used forearthing on wall and/or any other purpose with necessary copperclamps fixed on wall painted with bituminous paint in an approvedmanner with joints required. As per specification no. EA-EP. |
| 12 | Item.No.12) Supplying & erecting conventional spike type air terminationsuitable to carry lightning stroke made up of heavy gauge 40 mm diacopper pipe of standard length with 5 Nos. copper spikes fixed oncopper ball as air terminals duly threaded in copper pipe erected onprovided foundation in an approved manner. |
| 13 | Item.No.13) Providing and Back filling back filling ground enhancingcompound 25 kg bag complete |
| 14 | Item.No.14)Supplying, erecting& terminating XLPE unarmoured cable 1 core 25 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no. CB-LT/CU |
| 15 | Item.No.15)Arm. cable 3 1/2x25 sq.mm. (7.1.15)Supplying, erecting & terminatingXLPE armoured cable 3½ core25 sq. mm. aluminium conductor withcontinuous5.48 sq. mm. (12 SWG) G.I. earth wire completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL |
| 16 | Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitablesolar inverter, timer setting arrangement, GI / powder coatedmodule structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete.(with 5 years warrantee) |
| 17 | MSEDCL CHARGES |
| 18 | Add for GST |
AI Tender Summary
Tender Timeline
May 28, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 04, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 07, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender