Provision Of Station Store At Icgs Ratnagiri

Tender Notice

28025023
Corrigendum : Provision Of Station Store At Icgs Ratnagiri
Indian
Maharashtra
21-06-2021
28-06-2021
30-06-2021

Tender Details

Provision Of Station Store At Icgs Ratnagiri - 1 M&L For Machine Cut Laterite Stone Masonry Exc 10 Cm In Width Square Rubble, Regular Coursed, Well Bonded, Bedded And Solidity Hearted , Built In Cement Mortar 1:6 Of Approx Size 38X23x20 Cm Laterite Stone Blocks All As Specified And Directed. 2 Cutting Openings Through Laterite Stone Masonry Built In Cement Mortar For Door, Window And Other Openings Or Enlarging Existing Openings, Converting Window Into Door Openings Etc. Or Cutting Out Defective Brick Work For Under Pinning , Including Providing Fixing And Removing Shoring, Cleaning And Stacking Bricks, Removing Surplus Serviceable Stone, Hard Core, Etc., To Store And Rubbish Not Exc. 50M All As Specified And Directed 3 M&L For Cutting Out Laterite Stone Masonry Built In Cement Mortar 1:4 , Forming Toothing For And Bonding New Into Old Work Including Value Of New Materials Entering Old Walls And Jointing And Pointing ( Measured On Vertical Face In Contact With Old Wall Only ) All As Specified And Directed 4 M&L Cutting Holes Exc Half Brick But Not Exc One Brick In Stone Walls Bulit In Cement Mortar Or Cement Lime Mortor And Stone Walls Bulit In Lime Mortor For Inserting Holdfasts & Making Good Dismantltled Portion In Cm ( 1:3 ) Or Pcc ( 1:2:4 ) Type B1 As All Specified And Directed 5 M&L For Rcc 1:2:4 Type B1 ( Using 20Mm Graded Stone Aggragate ) As In Lintel Beam, Cantilevers, Bressummers, Etc All As Specified And Directed. 6 Use And Waste Of Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Suports Over Hangs Etc. For Flat Rough Finished Surfaces Of Concrete All As Specified And Directed. 7 M&L For Rcc 1:2:4 Type B1 ( Using 20Mm Graded Stone Aggragate ) As In Chajjas , Etc All As Specified And Directed. 8 Use And Waste Of Formwork To Chullah Hoods, Chajjas, Troughs And Similar Items Including Edges For Flat Rough Finished Surfaces Of Concrete All As Specified And Directed. 9 M&L For Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length Bent To Shape Required Including Cranking Binding Spirally, Hooping For Columns Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9Mm Dia Or Securing With Clips All As Specified And Directed. 10 M&L For Mild Steel Tmt Steel Bars 5 Mm Dia And Over Up To 10Mm Dia To Shape Required Including Cranking Binding Spirally, Hooping For Columns Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9Mm Dia Or Securing With Clips As In Stirrups, Spacers And Binders All As Specified And Directed. 11 S & F Anodised Aluminium Powder Coating ( Minimum Thickness Of Powder Coating 50Micron ) Frame For Doors Windows, Ventilators And Partition Section With One Or More Rebates Including Joining Cleats For Fixing Etc. Complete All As Specified And Directed. 12 S&F Anodised Aluminium Powder Coating ( Minimum Thickness Of Powder Coating 50Micron ) Door Shutters, Aluminium Section Weighing 0.55 Kg / M Including Necessary Joining Cleats, Glazing Clips, Rubber Neoprene Packing, Handles 2 Nos In Each Door, Hinges, Anodised Aluminium Snap Beading Screws Etc. Complete All As Specified And Directed. 13 S&F Anodised Aluminium Window And Ventilator Shutters, Fixed / Sliding Type Without Sash Bars, Including Necessary Joining Cleats, Glazing Clips, Rubber Neoprene Packing, Anodised Aluminium Snap Beading Screws Etc. Complete All As Specified And Directed 14 M&L For 5.5Mm Thick Plain Sheet Glass Seleted Quality In Squares Exc 0.5 Sqm Each Pane And Fixed In Anodised Aluminium Frame Work Including Necessary Joining Cleats, Glasing Clips, Rubber Neoprene Pack In Etc. All As Specified And Directed 15 M&L For 4Mm Thick Plain Sheet Glass Ordinary Quality And Glazing, With Oil Putty In Squares, N.Exc 0.5 Sqm In Each Pane All As Specified And Directed 16 M&L Moorum / Red Bajri Filling In Floors Or Pavings, Laid In Layers \ N N.Exc 15Cm Thick, Spread, Levelled And Rammed Including \ N Watering All As Specified And Directed 17 M&L For Hard Core Of Broken Stone Or Boulders Of Gauge N.Exc.63Mm, Deposited, Spread, Levelled In Layers N.Exc.15Cm Thick, Watered And Rammed To A True Surface All As Specified And Directed. 18 M&L 100Mm Thick Pcc Type D-2, ( 1:4:8 ) As In Sub-Base Floors Using 40Mm Graded Stone Aggregate, Finishing Cement Concrete Even And Smooth Using With Out Using Extra Cement All As Specified And As Directed. \ N 19 M&L For Screed Bed Or Bedding Layer Of Cement Mortar 15 Mm Thick In Cm 1:6 For Laying Floor Finishes All As Specified And Directed. 20 M&L Machine Cut Kota Stone Slab Flooring 20-25 Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing With Surface With Beeswax Polish Complete All As Specified And Directed 21 M&L Machine Cut Kota Stone Slab Flooring 20-25 Mm Thick Thick In Riser Of Steps, Skirting, Dado And Pillar Laid Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing With Surface With Beeswax Polish Complete All As Specified And Directed 22 M&L For Mild Steel Framed Work Such As Grills, Gratings Etc With Ends Of Bars Shoulders And / Or Rivetted Or Forged Into Spikes, Framed Guard Bars And Simillar Works Confirming To Fe 290, Gde-E-165 All As Specified And Directed. 23 M&L For Second Class Hard Wood Plain, Solid, Straight Chowkats And Frames, Wrought, Framed Rebated On The Solid, Rounded Or Chamfered, Put Together With Glue Pinned At Joints And Fixed All As Specified And Directed. 24 M&L For 35 Mm Thick Factory Made, Second Class Hardwood Plain Framed, Panelled Shutter ( Two Panel ) With Lock Rail And Panel Of 9 Mm B.W.P Commercial Ply Or 12 Mm Veneered Particle Board With Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per Is : 1003 ( Part 1 ) , Kiln Seasoned And Chemically Pressure Treated ) All As Specified And Directed. 25 S&F Collapsible Steel Gates, Top Hung, Consisiting Of Channel Pickets, Pivoted Flat Bars , Top & Bottom Runners, Brass Handles Etc., As Specified, Erected In Position And Securing Runners With Holdfasts And Brackets Complete All As Specified And Directed 26 M&L Rendering 15Mm Thick In Cement Mortar 1:6 On Laterite Stone Masonary Finished Even And Smooth Without Using Extra Cement All As Specified And Directed. 27 M&L Rendering ( 10Mm+5 Mm ) Thick On Fair Faces Of Latrite Stone Masnory Or Concrete Surfaces In Cm 1:4 In Two Layers, First Layer 10 Mm Thick Backing Coat In Cm 1:4 And 5Mm Thick Finishing Coat In Cm 1:4 Using Integral Water Proofing Compound Finished Even And Fair All As Specified And As Directed. \ Nnote : Wpc Will Be Measured And Paid Seprately Under Relevant Item Of Sch ''A''. 28 Supply Only Integral Water Proofing Compound Isi Marked All As Specified And Directed. 29 M&L For Preparing New Surfaces Of Walls And Applying Two Coat Of Oil Bound Distemper Over A Priming Coat With And Incl 3Mm Thick Wall Care Putty Complete All As Specified And Directed. 30 M&L For Preparing New Plaster Surface Of Wall Of Any Description And Apply Two Coats Of Water Proof Acrylic Emulsion Anti Fungal ( Exterior Grade ) Over A Coat Of Primer Complete All As Specified And Directed. 31 M&L For Preparation Of New Wood Surface Of Any Description Over 10Cm Width Or Girth Applying Two Coat Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specifed And Directed. 32 M&L For Preaparing New Steel Surface Of Any Description Width Or Girth Exc. 10Cm And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide All As Specified And Directed. 33 S&F Butt Hinges Of Size 100 Mm Extruded Aluminium Alloy With Galvanised Mild Steel Hinge Pin , Anodised And Fixed Type B-21 All As Specified And Directed. 34 S&F 200Mm Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section And Fixed All As Specified And Directed. 35 S&F Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple ( Bolt Type ) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed Of Size 300Mm All As Specified And Directed. 36 S&F Aluminium Handles, Cast Type, Anodised Of 125Mm Size All As Specified And Directed. 37 S&F Floor Door Stopper Of Aluminium Alloy Body And Tongue, Anodised, With Hard Drawn Steel Spring, Fixed In Floor Overall Length Of Cover Plate 140Mm All Soecified And Directed. 38 M & L For Gypsum Ceiling Boards, Decorative Type Prepainted Of Size 600 X 600 X 9 To 9.5Mm Thick Laid Over And Including Grid Work Of Size 600 X 600Mm, Made Out Of 0.5Mm Thick G.I Tee 32 X 24 Mm For Main, 25 X 24Mm For Cross Tee And 20 X 20 Mm Angle Fixed On Wall Powder Coated Finish On Exposed Faces Of Tee And Angle, Hung Form Ceiling Using 3 Mm Thick G.I Suspension Wires Spaced At 1200 Mm On Main Runners Including Making Niches For Fans / Light Complete All As Specified & As Directed. 39 Excavating In Post Holes ( Or Similar Holes ) Each N Exc 0.5 Cu. M, Getting Out, Returning, Filling In & Raming Earth / Broken Rubble Mixed With Earth Around, In Layers N. Exc. 25Cm, Watering, & Removing Surplus Soil To A Distance N Exc 50M & Making Good Surface In Soft / Disintegrated Rock. 40 M&L Pcc In Foundations, Filling And Mass-Concrete Type C2 ( 1:3:6 ) Using 40 Mm Graded Stone Aggregate All As Specified And As Directed. 41 M&L For Mild Steel Rolled Sections As In Main And Cross Beams, Hip And Jack Rafters; Purlins Where Connected To Common Rafters And Running Rails And Guides For Sliding Doors ; Fixed With Angle Cleats Or Other Connecting Plates, Confirming To Fe 410-W ( Gde E-250 ) Quality B All As Specified And Directed. 42 M&L For Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws Complete All As Specified And Directed. \ N \ N 43 M&L For Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Ridges Covering / Cladding To Wall, Fixed With Self Tapping Screws Complete All As Specified And Directed 44 Excavation In Trenches, N.Exc 1.5M Wide And N.Exc 1.5M In Depth, For Foundation, Etc. Or For Shaft, Wells, Cespits Manholes, Piers Holes, Etc. Nexc 10Sqm On Plan And Getting Out In Soft / Disintegrated Rock All As Specified And Directed. 45 Returning Filling In And Spreading Levelling, Watering And Well Ramming In Layers N.Exc 25 Cm Thick In Soft / Disintegrated Rock All As Specified And Directed. 46 Removing Excavated Meterials ( Rock ) N.Exc 50M And Deposited Where Directed At A Level N.Exc 1.5M Above The Starting Point All As Specified And Directed. 47 M &L Pcc 1:4:8 Type D-2 ( Using 40Mm Graded Stone Aggregate ) In Foundations, Filling And Mass Concrete All As Specified And Directed 48 M & L Rendering 10Mm Thick In Cm 1:4 On Latrite Stone / Concrete Surfaces Finshed Even And Smooth Without Using Extra Cement All As Specified And Directed 49 M&L For Preparation Of New Surfaces Of Walls And Applying Three Coats Of White Wash Complete All As Specified And Directed. 50 M&L For 18Mm To 20Mm Thick Granite Of ( Any Type ) Work ( Table Rubbed And Polished ) In Steps , Jambs, Pillars Window Cills , Cooking Platforms And Like In Cement Mortar 1:4 Including Pointing In White Cement ( 1:2 ) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite All As Specified And Directed. 51 M&L For Point Wiring Complete With Proper Colour Code, 1100 Volts Grade, 1.5 Sqmm, Pvc Insulated Frls, Unsheathed Wire With Multi Stranded Copper Conductor Confirming To Is-694:1990, Part Ii With Isi Marked And Including Pvc Conduit Medium Grade Not Less Then 25 Mm Dia, Isi Marked With All Accessories On Surface Conduit In Wall / Celling / Floor / Roof Etc, Incl Pvc Rectangular Box Of Suitable Size With Pvc Top Sheet, Including 1.5 Sqmm, Pvc Insulated, Frls, Unsheathed, 1100 Volts Multistranded Copper Conductor Green Colour As Continuous Earth Wire Connected To Common Earth Dolly All As Specified And Directed For The Following:- 52 One Light Point Controlled By One Switch. 53 One Ceiling Fan / Exhaust Point Controlled By One Switch. 54 One Three Pin Switch Socket 5 Amps Outlet On Independent Board. 55 One 3Pin 5Amps Socket Out Let Point Controlled By One Switch On Same Board With Other Switches. 56 S&F One 3 / 6 Pin Switch Socket Commend 15 Amps Outlet With 4Sq Mm, Pvc Insulated Frls, Unsheathed Wire On Independent Board All As Specified And Directed. 57 S&F Led Tube Light Fitting 1X18 Watts Tube Including 18 W Led Tube All As Per Shakti Model No.: Szslbmx018 For Batten And Including 18 W Led Tube Including Necessary Connection Etc Complete All As Specified And Directed. Make : ( Shakti, Bajaj, Wipro, Crompton Greaves, Philips Or As Given In Ps ) 58 S&F 2''X2'' Led Surface Panel Light 36 W 3000 Lumems Luminare With Polmer Diffuser Complete With Accessories Panel Led-36Watt, Shakti Model -Szrelmx036 As Specified And Directed Make : ( Shakti, Bajaj, Wipro, Crompton Greaves, Philips Or As Given In Ps ) 59 S&F Mcb Db Tpn 6 Way, Having Degree Of Protection As Ip 43- With Metal Door ( Double Door ) , 415 V, Complete With 100 Amps Rated Copper Bus Bar And Neutral Link With Provision For Mcb 4 Pole As Incomer And 10 Sp Mcbs As Outgoing All As Specified And Directed. 60 S&F Mcb Tpn 32 / 40 Amps 50 Hz 415 Volt With Rupturing Capacity 16 Ka All As Specified And Directed. 61 S&F Mcb Sp 16 Amps To 40 Amps 50 Hz 230 Volt With Rupturing Capacity 10 Ka All As Specified And Directed. 62 S&F Mcb Sp 6 Amps 50 Hz 230 Volt With Rupturing Capacity 10 Ka All As Specified And Directed. 63 Supply & Fix Ceiling Fan Complete With Blades, Down Rods, Electronic Type Regulator And Accessories, 230V, 1200 Mm Sweep. Min Air Delivery 210 Cfm With Service Value 6.00 Bee Five Star Rated With Brushless Current Motor ( Bldc ) All As Specified And Directed. 64 M&L For Earthing Using Gi Earthing Wire Of 4 Mm Dia Complete With Galvanised Steel Wire Earth Plate Electrode 600Mm X 600Mm X 6Mm Thick Buried Directly In Ground, Earth Pit Not Less Than 2.25 Meters Deep Below Ground Level Connection To And Including Gi Wire Of Size 4Mm Dia To The Extend 7.5Mtr As Earth Lead By Means Of Gi Bolts, Nuts Etc With Provision Of Charcoal And Salt All As Per Electrical Plate No 3 Of Ssr Part I Including Water Arrangement With Gi Pipe 20Mm Dia ( Medium Grade ) Earth Lead Protection Pipe 15Mm Dia Medium Grade With Bends , Elbow Etc From Earth Plate To Test Point, Excavation And Earth Work In Any Type Of Soil Returning , Filling , Ramming And Removing Of Soil To Distance Not Exc 50 Mtr , Making Good To Match With Existing Surface Making Pcc Pit ( Earth Chamber ) Having Internal Size 30Cm X 30Cm X 30Cm And Outer Size 60Cm X 60Cm With Rcc Reinforced Cover 50 Mm Thick And Testing On Completion Including Making Test Point On Wall As Per Ssr Specification All As Specified And Directed. 65 Supply, Laying And Testing Cable Xlpe Insulated , Screened, Pvc Bedded, Galvanized Steel Strip Or Wire Armoured, Electric Power Cables ( Heavy Duty ) 1100 Volts Grade With Stranded Aluminium Conductor Of Size 10 Sq Mm 4 Core All As Specified And Directed. 66 M&L, Clean, Dry, Unwashed Sand Filled In Trenches / Ducts For Cushioning To Cable Including Punning Complete All As Specified. \ Nnote : The Depth Of Sand Cushion After Punning Shall Be Measured. 67 Supplying And Laying Un-Reinforced Pre Cast Concrete Cable Cover Of Class Lv Type 1 Flat Size 250 Mm X 150 Mm X 40 Mm Fixed In Replacement Of Any Type Bricks Or Pcc Covers All As Specified And Directed. 68 Supply And Fix Galavanised Steel Tubes, Light Grade As Cable Protection Laid On Trench / Floor Fixed On Pole / Wall Etc Of 40 Mm As Specified And Directed.

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 11-Jun-2021 BOQ BOQ 21-06-2021
2 21-Jun-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 28-06-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 26000.00 /-
Tender Value
Refer document

BOQ Items

Name of Work: PROVN OF STATION STORE AT ICGS RATNAGIRI
Sl. No. Item Description Item Code / Make Quantity Units
1 1 M&L for Machine cut Laterite stone masonry exc 10 cm in width square rubble, regular coursed, well bonded, bedded and solidity hearted ,built in cement mortar 1:6 of approx size 38x23x20 cm laterite stone blocks all as specified and directed. 32 Cum
2 2 Cutting openings through laterite stone masonry built in cement mortar for door,window and other openings or enlarging existing openings,converting window into door openings etc. or cutting out defective brick work for under pinning ,including providing fixing and removing shoring,cleaning and stacking bricks, removing surplus serviceable stone, hard core, etc., to store and rubbish not exc. 50m all as specified and directed 0.5 Cum
3 3 M&L for Cutting out laterite stone masonry built in cement mortar 1:4 ,forming toothing for and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) all as specified and directed 1.5 Sqm
4 4 M&L cutting holes exc half brick but not exc one brick in stone walls bulit in cement mortar or cement lime mortor and stone walls bulit in lime mortor for inserting holdfasts & making good dismantltled portion in CM (1:3) or PCC (1:2:4) type B1 as all specified and directed 4 Each
5 5 M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggragate) as in lintel beam, cantilevers, bressummers,etc all as specified and directed. 1.5 Cum
6 6 use and waste of Formwork to sides and soffits of floor or roof beams,beam haunchings, girders,bressummers, lintels, cantilevers, shelves including suports over hangs etc. for flat rough finished surfaces of concrete all as specified and directed. 13 Sqm
7 7 M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggragate) as in chajjas ,etc all as specified and directed. 1.2 Cum
8 8 use and waste of Formwork to Chullah hoods, chajjas, troughs and similar items including edges for flat rough finished surfaces of concrete all as specified and directed. 14 Sqm
9 9 M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. 220 Kg
10 10 M&L for mild steel TMT steel bars 5 mm dia and over up to 10mm dia to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups,spacers and binders all as specified and directed. 75 Kg
11 11 S & F anodised aluminium powder coating (minimum thickness of powder coating 50micron) frame for doors windows,ventilators and partition section with one or more rebates including joining cleats for fixing etc. complete all as specified and directed. 80 kg
12 12 S&F Anodised aluminium powder coating (minimum thickness of powder coating 50micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed. 4.8 Sqm
13 13 S&F Anodised aluminium window and ventilator shutters,fixed /sliding type without sash bars, including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified and directed 50 Kg
14 14 M&L for 5.5mm thick plain sheet glass seleted quality in squares exc 0.5 Sqm each pane and fixed in anodised aluminium frame work including necessary joining cleats, glasing clips, rubber neoprene pack in etc. all as specified and directed 4 Sqm
15 15 M&L for 4mm thick plain sheet glass ordinary quality and glazing, with oil putty in squares, n.exc 0.5 sqm in each pane all as specified and directed 10 Sqm
16 16 M&L Moorum/red bajri filling in floors or pavings, laid in layers\n n.exc 15cm thick, spread,levelled and rammed including\n watering all as specified and directed 20 Cum
17 17 M&L for hard core of broken stone or boulders of gauge n.exc.63mm, deposited, spread, levelled in layers n.exc.15cm thick, watered and rammed to a true surface all as specified and directed. 20 Cum
18 18 M&L 100mm thick PCC type D-2, (1:4:8) as in sub-base floors using 40mm graded stone aggregate,finishing cement concrete even and smooth using with out using extra cement all as specified and as directed. \n 150 Sqm
19 19 M&L for Screed bed or bedding layer of cement mortar 15 mm thick in CM 1:6 for laying floor finishes all as specified and directed. 160 Sqm
20 20 M&L Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with surface with beeswax polish complete all as specified and directed 150 Sqm
21 21 M&L Machine cut kota stone slab flooring 20-25 mm thick thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with surface with beeswax polish complete all as specified and directed 10 Sqm
22 22 M&L for mild steel framed work such as grills,gratings etc with ends of bars shoulders and/or rivetted or forged into spikes, framed guard bars and simillar works confirming to Fe 290, Gde-E-165 all as specified and directed. 185 Kg
23 23 M&L for second class Hard Wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed all as specified and directed. 0.04 Cum
24 24 M&L for 35 mm thick factory made, second class hardwood plain framed, panelled shutter(two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part 1), kiln seasoned and chemically pressure treated) all as specified and directed. 2.6 Sqm
25 25 S&F Collapsible steel gates, top hung, consisiting of channel pickets, pivoted flat bars , top & bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and directed 4.8 Sqm
26 26 M&L Rendering 15mm thick in cement mortar 1:6 on laterite stone masonary finished even and smooth without using extra cement all as specified and directed. 175 Sqm
27 27 M&L rendering(10mm+5 mm) thick on fair faces of latrite stone masnory or concrete surfaces in CM 1:4 in two layers, first layer 10 mm thick backing coat in CM 1:4 and 5mm thick finishing coat in CM 1:4 using integral water proofing compound finished even and fair all as specified and as directed.\nNote : WPC will be measured and paid seprately under relevant item of Sch 'A'. 175 Sqm
28 28 Supply only Integral Water Proofing Compound ISI marked all as specified and directed. 15 Kg
29 29 M&L for preparing new surfaces of walls and applying two coat of Oil Bound Distemper over a priming coat with and incl 3mm thick wall care putty complete all as specified and directed. 175 Sqm
30 30 M&L for Preparing new plaster surface of wall of any description and apply two coats of water proof acrylic emulsion anti fungal (Exterior grade) over a coat of primer complete all as specified and directed. 175 Sqm
31 31 M&L for Preparation of new wood surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specifed and directed. 6.6 Sqm
32 32 M&L for Preaparing new steel surface of any description width or girth exc. 10cm and applying two coats of synthetic enamel paint over a coat of red oxide all as specified and directed. 58 Sqm
33 33 S&F butt hinges of size 100 mm extruded aluminium alloy with galvanised mild steel hinge pin , anodised and fixed type B-21 all as specified and directed. 6 Each
34 34 S&F 200mm Aluminium, anodised, barrel tower bolts of extruded section and fixed all as specified and directed. 2 Each
35 35 S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of size 300mm all as specified and directed. 2 Each
36 36 S&F Aluminium handles, cast type, anodised of 125mm size all as specified and directed. 4 Each
37 37 S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm all soecified and directed. 2 Each
38 38 M & L for Gypsum ceiling boards,decorative type prepainted of size 600 x 600 x 9 to 9.5mm thick laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I tee 32 x 24 mm for main, 25 x 24mm for cross tee and 20 x 20 mm angle fixed on wall powder coated finish on exposed faces of tee and angle, hung form ceiling using 3 mm thick G.I suspension wires spaced at 1200 mm on main runners including making niches for fans/light complete all as specified & as directed. 132 Sqm
39 39 Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/disintegrated rock. 10 Each
40 40 M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate all as specified and as directed. 1.5 Cum
41 41 M&L for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors ; fixed with angle cleats or other connecting plates, confirming to Fe 410-W (Gde E-250) quality b all as specified and directed. 815 Kg
42 42 M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.\n\n 75 Sqm
43 43 M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridges covering/cladding to wall, fixed with self tapping screws complete all as specified and directed 10 Sqm
44 44 Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth, for foundation, etc. or for shaft, wells, cespits manholes, piers holes, etc. nexc 10sqm on plan and getting out in soft/disintegrated rock all as specified and directed. 18.7 Cum
45 45 Returning filling in and spreading levelling,watering and well ramming in layers n.exc 25 cm thick in soft/disintegrated rock all as specified and directed. 11.8 Cum
46 46 Removing excavated meterials (rock) n.exc 50m and deposited where directed at a level n.exc 1.5m above the starting point all as specified and directed. 6.7 Cum
47 47 M &L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete all as specified and directed 1 Cum
48 48 M & L Rendering 10mm thick in CM 1:4 on latrite stone/concrete surfaces finshed even and smooth without using extra cement all as specified and directed 65 Sqm
49 49 M&L for preparation of New surfaces of walls and applying three coats of white wash complete all as specified and directed. 65 Sqm
50 50 M&L for 18mm to 20mm thick Granite of (any type) work (table rubbed and polished) in steps , jambs,pillars window cills ,cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed. 12 Sqm
51 51 M&L for point wiring complete with proper colour code, 1100 volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor confirming to IS-694:1990, Part II with ISI marked and including PVC conduit medium grade not less then 25 mm dia, ISI marked with all accessories on surface conduit in wall/ celling/ floor/ roof etc, incl PVC rectangular box of suitable size with PVC top sheet, including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for the following:-
52 51.01 One light point controlled by one switch. 16 Per Point
53 51.02 One ceiling fan / Exhaust point controlled by one switch. 10 Per Point
54 51.03 One three pin switch socket 5 amps outlet on independent board. 15 Per Point
55 51.04 One 3pin 5amps socket out let point controlled by one switch on same board with other switches. 5 Per Point
56 52 S&F One 3/ 6 pin switch socket commend 15 Amps outlet with 4Sq mm,PVC insulated FRLS, unsheathed wire on independent board all as specified and directed. 5 Per Point
57 53 S&F LED tube light fitting 1x18 watts tube including 18 W LED tube all as per Shakti Model No.: SZSLBMX018 for batten and including 18 w LED tube including necessary connection etc complete all as specified and directed. Make : (Shakti, Bajaj, Wipro, Crompton Greaves, Philips or as given in PS) 4 Each
58 54 S&F 2'x2' LED surface panel light 36 W 3000 LUMEMS Luminare with polmer diffuser complete with accessories panel LED-36Watt, Shakti Model -SZRELMX036 as specified and directed Make : (Shakti, Bajaj, Wipro, Crompton Greaves, Philips or as given in PS) 12 Each
59 55 S&F MCB DB TPN 6 way, having degree of protection as IP 43- with metal door (double door), 415 V, complete with 100 amps rated copper bus bar and neutral link with provision for MCB 4 pole as incomer and 10 SP MCBs as outgoing all as specified and directed. 1 Each
60 56 S&F MCB TPN 32/40 Amps 50 Hz 415 Volt with rupturing capacity 16 KA all as specified and directed. 2 Each
61 57 S&F MCB SP 16 Amps to 40 Amps 50 Hz 230 Volt with rupturing capacity 10 KA all as specified and directed. 4 Each
62 58 S&F MCB SP 6 Amps 50 Hz 230 Volt with rupturing capacity 10 KA all as specified and directed. 6 Each
63 59 Supply & fix ceiling fan complete with blades, down rods, electronic type regulator and accessories, 230V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless current motor(BLDC) all as specified and directed. 10 Each
64 60 M&L for earthing using GI earthing wire of 4 mm dia complete with galvanised steel wire earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground, earth pit not less than 2.25 meters deep below ground level connection to and including GI wire of size 4mm dia to the extend 7.5mtr as earth lead by means of GI bolts, nuts etc with provision of charcoal and salt all as per electrical plate No 3 of SSR Part I including water arrangement with GI pipe 20mm dia (medium grade) earth lead protection pipe 15mm dia medium grade with bends , elbow etc from earth plate to test point, excavation and earth work in any type of soil returning , filling , ramming and removing of soil to distance not exc 50 mtr , making good to match with existing surface making PCC pit (earth chamber)having internal size 30cm x 30cm x 30cm and outer size 60cm x 60cm with RCC reinforced cover 50 mm thick and testing on completion including making test point on wall as per SSR specification all as specified and directed. 1 Each
65 61 Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded,galvanized steel strip or wire armoured,electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core all as specified and directed. 70 RM
66 62 M&L, clean, dry, unwashed sand filled in trenches / ducts for cushioning to cable including punning complete all as specified. \nNote : The depth of sand cushion after punning shall be measured. 4.86 Cum
67 63 Supplying and laying un-reinforced pre cast concrete cable cover of class LV type 1 flat size 250 mm x 150 mm x 40 mm fixed in replacement of any type bricks or PCC covers all as specified and directed. 360 Each
68 64 Supply and fix galavanised steel tubes, light grade as cable protection laid on trench/floor fixed on pole/wall etc of 40 mm as specified and directed. 10 RM
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail