Providing And Fixing Of Lmo Tank, Vie Vaporizer And Other Equipments Accessories Required For Dedicated Covid Health Centre Of 800 Beds Capacity Including 590 Oxygenated And 210 Icu Beds At Godown Of Cotton Corporation Of India Ltd. At Kalamboli-Pr, CIDCO LTD.-Maharashtra

Providing And Fixing Of Lmo Tank, Vie Vaporizer And Other Equipments Accessories Required For Dedicated Covid Health Centre Of 800 Beds Capacity Including 590 Oxygenated And 210 Icu Beds At Godown Of Cotton Corporation Of India Ltd. At Kalamboli-Providing & Fixing of LMO Tank, VIE Vaporizer and other equipments & accessories for 1) Primary Supply Systemincluding 1 x 20 KL empty LMO Tank with capacity vacuum + super insulated (Non-T) vertical storage tank designed to EN-13458 codealong with 2 nos. 1200 nm3 Ambient Air Low pressure vaporizer designed as per ASME code and pressure and flow control skid with kit with interconnecting pipe & Electrical wiring (inside LMO area work) 2) secondary Supply Systemincluding 1 x 20 KL empty LMO Tank with capacity vacuum + super insulated (Non-T) vertical storage tank designed to EN-13458 codealong with 2 nos. 1200 nm3 Ambient Air Low pressure vaporizer designed as per ASME code and pressure and flow control skid with kit with interconnecting pipe & Electrical wiring (inside LMO area work) Note:- a)The LMO tank should confirm the following specification :- The LMO tank (1 each for primary and secondarysupply system separately )should confirm the following specification :-20 KL capacity vacuum + super insulated (Non-T) vertical storage tank designed to EN-13458 code for LIN/LOX/LAR service GROSS VOLUME 21930 LIT NET CAPACITY 20834 LIT INNER VESSEL MATERIAL:STAINLESS STEELDESIGN & MANUFACTURING CODEEN13458 MAX. ALLOWABLE WORKING PRESSURE17.60 KG/CM2 (g) DESIGN PRESSURE (Corrected for vacuum)18.633 KG/CM2 (g) DESIGN TEMPERATURE-196 TO +40 DEG. C CLEANING DUTYOXYGEN INSULATION VACUUM + SUPER INSULATED OUTER VESSEL MATERIAL CARBON STEEL DESIGN CODE EN13458 RATING PRESSURE VACUUM EMPTY WEIGHT [APPROX]7718 Kg. FULL WEIGHT(APPROX) WITH LIN 24573 Kg. FULL WEIGHT(APPROX) WITH LOX 31490 Kg. FULL WEIGHT(APPROX) WITH LAR36844 Kg. DIMENSIONS OUTSIDE DIAMETER2210mm OVERALL HEIGHT10486mm EXTERNAL SURFACE MECHANICAL CLEANING PRIMER / FINAL PAINT (POLYURETHANE)TWO COATS EACH Exact volume could be +/-3% after stretchingincluding submission of certificate for EN-13458 code for LIN/LOX/LAR service with complete details b) The Ambient Air Low pressure vaporizer ( 4 nos , i.e 2 nos each for primary & secondary supply system each separately) should be designed as per ASME code for LOX/LIN/LARLOW PRESSURE ATMOSPHERIC VAPORISERDUTY (Nominal). 08 HRS INLET/ DESIGN TEMP. -196 to + 65 DEG.COUTLET TEMP. 15 Deg. below ambient Temp. (DEG.C) CAPACITY FLOW (LOX)1250 Nm3/hr for LOX HEATING MEDIUM AMBIENT AIR MAX. OPERATING PRESSURE38 KG/CM2 (g) DESIGN PRESSURE 40 KG/CM2 (g) PNEUMATIC TEST PRESSURE 44 KG/CM2 (g) CLEANING DUTY - OXYGEN DESIGN & MFG. CODE - ASME SEC.VIII DIV.I INLET FLANGE (DRILLED TO ASME B16.5)25 DN OUTLET FLANGE(DRILLED TO ASME B16.5)25 DN Overall dimension2172mm x 2122mm x 4770mm LMO Tank will be connected to VIE vaporizer and then VIE Vaporizer will be connected to skid and skid willbe connected manifold control panel.including submission of certificate for certificate for EN-13458 code for LIN/LOX/LAR service c) Pressure and flow control skid with kit with interconnecting pipe vaporizer ( 4 nos , i.e 2 nos each for primary & secondary supply system each separately): It will be supplied Safety valve, Long stream globe valve, Isolation Valve, Duplex High Pressure Regulator of 1200nm3 of along with Pressure guage 4”, Non return valve, Isolation valve, Outlet flange with SS 304 pipes. d) Interconnecting Stainless steel 304 grade pipee) Medical Liquid Oxygen Control Panel: VIE Control Panel. It should fully complies and meets with the requirements of the UK DOH Health Technical Memorandum 02-01 (HTM 02-01) standards only. It shall be duly CE marked to the Medical Device Directive 93/42/EEC under the auspices of notified body no. and under this directive, med gas products are classified as Class II Medical Devices. VIE Control Panels should be duplex configuration, with one standby and one duty regulator set. The VIE Control panel is designed to accept a supply of gaseous oxygen from the VIE at 1050 kPa (10.5) bar or from the standby manifold at 850 kPa (8.5 bar) and to reduce the pressure to a nominal 420 kPa (4.2 bar) pipeline distribution system pressure. VIE Control panels are designed to regulate line pressure 28mm, sized pipe line. Mounted on a light weight mild steel zinc plated and passivity back plate assembly. It should be light weight less the 70Kg. All components degreased for oxygen use. Mild steel powder coated enclosure with inlet and outlet pressure gauges.Pressure Sensors: Pressure switches monitor inlet pressure. Dual line pressure switch monitor (high and low pressure). Pressure Reduction Capacity: Maximum inlet pressure: 2,800 kPa (28 bar) Outlet pressure reduced to: 420 kPa (4.2 bar). Flow Rate: 28mm system 3,000 L/min Relief Valve Settings: Nominal 4 bar manifold 550 kPa (5.5 bar) Letter of authorization from original manufacturer with technical compliance must be submitted along with bid documents. HTM0201 standards complies certificate from original manufacturer must be submitted along with tender bid documents. European CE with 4 digit notified body number certificate must be submitted along with bid documents. Country of origin certificate must be submitted along with tender bid documents. If required certificates not submitted bid will be rejected and technically disqualified. including submission of Certificate for Health Technical Memorandum 02-01 (HTM 02-01) standards must be submitted.CE Certificate with valid notified body with four digit CE no. specified on itfor Medical Device Directive 93/42/EEC under the auspices of notified body no. and under this directive, med gas products are classified as Class IIb Medical Devices. f) High Flow Pressure Guage (4 nos)(*Pressure range 0-16, Dial size 4 inch) g) Spring Loaded Safety Valve with set pressure * 5.5kg pressure relief safety valve (4 nos).h) Over Head Shower For vaporizer of above describe capacity with required Piping and all accessories, fittings (inside LMO area work).i) Electrical wiring (inside LMO area work) J) Design & providing RCC foundation required for LMO Tank, VIE Vaporizer and other equipments & accessories as required etc complete. Note:- Technical Compliance must be provided by the bidders for each item above with all required documents

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	04-06-2021	Corrigendum No. 1	Date	10-06-2021
2	11-06-2021	Corrigendum No. 2	Date	17-06-2021

INR 1180 /-

Refer document

Refer document