Construction Of G Plus 3 16 L . S . Quarter ( Block 8 ) And Sewak Quarter ( Block 5 And 6 ) At Cts , Musabani In The District Of East Singhbhum .
Tender Value
7.79 Crore
Estimated cost
Bid Submission
14 Jun 2021
0 days left
EMD
7.80 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
CTS, Musabani → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of G Plus 3 16 L . S . Quarter ( Block 8 ) And Sewak Quarter ( Block 5 And 6 ) At Cts , Musabani In The District Of East Singhbhum .
BOQ
| Name of Work: Construction of G + 3 16 L.S. Quarter (Block- 8) and Sewak Quarter (Block – 5 & 6) at CTS, Musabani in the district of East Singhbhum. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | L.S. Quarter (Block- 8) and Sewak Quarter (Block- 5 & 6) | 1 | ||
| 2 | 2 | Building Work | 2 | ||
| 3 | 3 | \nEarthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 m including all lifts, levelling , ramming the foundation trenches, removing roots of trees, serbs all complete as per approved design,building specification & direction of E/I. | 3 | 1796.58 | CU.M |
| 4 | 4 | \nExtra for earth work in hard soil as per specification and direction of E/I.( vide classification of soil item B) | 4 | 1796.58 | CU.M |
| 5 | 5 | \nEARTH FILLING IN FOUNDATION TRENCHES AND PLINTH in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) | 5 | 1552.31 | CU.M |
| 6 | 6 | \nProviding coarse clean local sand in filling in foundation trenches or in plinth including ramming and watering in layer not exceeding 150mm thick with all leads and 1.5M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume) | 6 | 579.616 | CU.M |
| 7 | 7 | \nProviding designation 75 A one brick flat soling joints filles with local sand including cost of watering taxes royalty all complete as per building specefication and direction of E/I | 7 | 2140.88 | SQ.M. |
| 8 | 8 | \nProviding P.C.C.M 100 in normal mix of (1:3:6) in foundation with approved quality of stone metal grade II (50mm to 25mm size) clean coarse sand to F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I | 8 | 152.14 | CU.M |
| 9 | 9 | \nProviding RCC M-200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. | 9 | 217.25 | CU.M |
| 10 | 10 | \nProviding R.C.C.M - 200 in band at plinth level with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. | 10 | 33.03 | Cum. |
| 11 | 11 | \nProviding R.C.C. M-20 with nominal mix of 1:1.5:3 in COLUMN with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge. | 11 | ||
| 12 | 12 | Height upto 5mt | 12 | 66.78 | CU.M |
| 13 | 13 | Height 5mt to 10mt | 13 | 109.4 | CU.M |
| 14 | 14 | Height above 10mt | 14 | 62.28 | CU.M |
| 15 | 15 | \nProviding RCC M-200 with nominal mix of (1:1.5:3) in beam of all types with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. | 15 | ||
| 16 | 16 | Height upto 5mt | 16 | 127.548 | CU.M |
| 17 | 17 | Height 5mt to 10mt | 17 | 178.08 | CU.M |
| 18 | 18 | Height above 10mt | 18 | 79.614 | CU.M |
| 19 | 19 | \nProviding RCC M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. | 19 | ||
| 20 | 20 | Height upto 5mt | 20 | 137.44 | CUM |
| 21 | 21 | Height 5mt to 10mt | 21 | 266.1 | CUM |
| 22 | 22 | Height above 10mt | 22 | 135.63 | CUM |
| 23 | 23 | \nProviding R.C.C.M 200 (1: 1.5: 3) in Band at Lintel level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I | 23 | ||
| 24 | 24 | Height upto 5mt | 24 | 2.01 | CUM |
| 25 | 25 | Height 5mt to 10mt | 25 | 4.04 | CUM |
| 26 | 26 | Height above 10mt | 26 | 2.01 | CUM |
| 27 | 27 | \nProviding RCC M-200 with nominal mix of (1:1.5:3) in lintel with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. | 27 | ||
| 28 | 28 | Height upto 5mt | 28 | 12.034 | CUM |
| 29 | 29 | Height 5mt to 10mt | 29 | 33.31 | CUM |
| 30 | 30 | Height above 10mt | 30 | 12.28 | CUM |
| 31 | 31 | \nProviding RCC M 200 (1:1.5:3) in stair case with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. | 31 | ||
| 32 | 32 | Height upto 5mt | 32 | 9.08 | CUM |
| 33 | 33 | Height 5mt to 10mt | 33 | 18.16 | CUM |
| 34 | 34 | Height above 10mt | 34 | 9.08 | CUM |
| 35 | 35 | \nProviding Av. 63 MM thk M200 With nominal mix in Chajja..(1:1.5:3) Chajja with apporoved quality ofstone chips 20 mm to 6 mm size graded and cleane coarse sand of FM. 2.5 to 3 including making drips course in concrete , sereening centering shuttring and mixing cement concrete in mixer and placing in posotion vibrating striking 6 mm cemet plaster 1:4 in ceiling and side of chajja with sand of FM. 1.5 curing (but excluding the cost of reinforcement ) taxes and royalty sll complere as per building specefication and direction of E/I | 35 | ||
| 36 | 36 | Height upto 5mt | 36 | 3.43 | CUM |
| 37 | 37 | Height 5mt to 10mt | 37 | 12.01 | CUM |
| 38 | 38 | Height above 10mt | 38 | 4.75 | CUM |
| 39 | 39 | \nProviding R.C.C M-150 with with nominal mix of (1:1.5:3) shelves with apporoved quality of stone chips 12 mm to 6 mm size graded and cleane coarce sand of FM 2.5 to 3 with 1.5 mm cement punning at top and side and 6 mm cement plaster (1:4) at bottom including screening curing and placing the slab in in position taxes and royalty all complete as per building specefication ad direction of E/I | 39 | ||
| 40 | 40 | Height upto 5mt | 40 | 5 | CUM |
| 41 | 41 | Height 5mt to 10mt | 41 | 14.24 | CUM |
| 42 | 42 | Height above 10mt | 42 | 6.32 | CUM |
| 43 | 43 | \nProviding designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. | 43 | 282.509 | CU.M |
| 44 | 44 | \nProviding and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) | 44 | 128.8 | SQ.M |
| 45 | 45 | \nProviding designation 75 A BRICK WORK in CM. (1:6) in SUPERSTRUCTURE with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening,racking out joints to 15 mm depth,curing, taxes and royalty all complete as per building specification and direction of Engineer Incharge | 45 | 979.62 | CU. M |
| 46 | 46 | \nProviding designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out | 46 | 2697.01 | SQ.M |
| 47 | 47 | \nProviding 12mm thick cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I | 47 | 13865.3 | SQ.M. |
| 48 | 48 | \nProviding 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scafolding taxes and royalty all complete as per buildings specification and direction of E/I. | 48 | 4618.16 | SQ.M. |
| 49 | 49 | \nExtra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. | 49 | 1274.43 | SQ.M |
| 50 | 50 | \nProviding 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 and including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I | 50 | 4860.94 | SQ.M. |
| 51 | 51 | \nProviding Tor steel reinforcement of 8 mm dia rods as per approved design and drawing excluding carriage of bars to work site cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per builing specification and direction of E/I. \n8 mm dia - TMT Fe 500 (Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel) | 51 | 227.24 | MT |
| 52 | 52 | \nSupplying chemical emulsion in sealed containers including delivery as specified.\n2.34.1 \nChlorpyriphos/ Lindane emulsifiable concentrate of 20% | 52 | 80 | Ltr |
| 53 | 53 | \nProviding & fixing FAN HOOK of 16 mm dia M.S. bar, 1 M long bent to required size and shape, placed in position and fluid in the R.C.C. slab-beam at the time of casting all complete as per building specification and direction of E/I. (where material is no | 53 | 279 | EACH |
| 54 | 54 | \nSupplying, fitting & fixing 250 x 20 x 6 mm L-type M.S. clamp properly fishtailed including making holes and setting the same in 375 x 125 x 75 mm cement concrete block (1:2:4) with cost of all layout and materials and taxes as per building specification and direction of E/I. | 54 | 1176 | EACH |
| 55 | 55 | \nMaking 20x6 mm grooves in plaster surface over walls trully horizontal or vertical as specified at regular intervals at all heights including cleaning finishing , scaffolding and curing with all leads and lifts of water all complete as per buildinng specification and direction of E/I. | 55 | 6407.16 | M |
| 56 | 56 | \nExtra for Brick work for each consecutive floor above first floor including watering and scaffolding all complete as per direction of E/I | 56 | ||
| 57 | 57 | For 10\" th. B/W. | 57 | ||
| 58 | 58 | A. Second Floor | 58 | 814.894 | Cum. |
| 59 | 59 | B. Third Floor | 59 | 61.81 | Cum. |
| 60 | 60 | For 5\" th B/W. | 60 | ||
| 61 | 61 | A. Second Floor | 61 | 55.69 | Cum. |
| 62 | 62 | B. Third Floor | 62 | 57.85 | Cum. |
| 63 | 63 | \nExtra for plaster work over exteriour surface for each consecutive floor above first floor including cost of scaffolding etc. all complete as per direction of E/I | 63 | ||
| 64 | 64 | A. Second Floor | 64 | 3846.34 | Sqm |
| 65 | 65 | B. Third Floor | 65 | 700.015 | Sqm |
| 66 | 66 | \nProviding & laying 15 mm to 23 mm thick KOTAH STONE SLAB FLOORING and skirting of approved size, texture and colour over 19 mm thick base of line mortar (1:1:1) Lime putty: Surkhi: Coarse sand) laid over and jointed with grey cement slurry mixed with pigment ot match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. 600X600MM Size | 66 | 230.647 | SQ. M |
| 67 | 67 | \nProviding and laying 25 mm thick kotah stone tiles in risers of steps, skirting and pillars of approved size texture and colour laid over 12 mm thick cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing taxes and royalty all complete as per building specification and direction of E/I. | 67 | 67.439 | SQ. M |
| 68 | 68 | \nExtra for pre finished nosing in treads of kota stone slab. | 68 | 552.749 | METRE |
| 69 | 69 | \nProviding and fixinging 20 mm thick mirror polished, machine cut for kitchen platform and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 (1cement :4 coarse sand) laid and jointed with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. | 69 | ||
| 70 | 70 | \nUDAIPUR GREEN MARBLE \nArea of slab over 0.5 sqm - | 70 | 149.383 | SQ. M |
| 71 | 71 | \nExtra for providing edge moulding to 18mm th marble stone counters, vanities etc. over above including machine polishing to edge to give high gloss finish etc. complete as per design approved by Architects / E/I. | 71 | 168.293 | R.MT. |
| 72 | 72 | \nProviding and laying VITRIFIED FLOOR TILES in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. (Approved brand - Kajaria/ Asian/ Somany) | 72 | 3304.55 | SQM |
| 73 | 73 | \nProviding and laying VITRIFIED TILES in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades in skirting and over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. (Approved brand - Kajaria/ Asian/ Somany) | 73 | 390.405 | SQ.M |
| 74 | 74 | \nKota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | 74 | 85.53 | Sqm |
| 75 | 75 | \nMarble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : | 75 | ||
| 76 | 76 | Udaipur green marble | 76 | 46.35 | Sqm |
| 77 | 77 | \nProviding and laying 6 mm precast SEMI GLAZED CERAMIC TILES of approved quality in DADO over 12mm cement mortar (1:3) and jointed with white cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royalty all complete as per building specification and direction of E/I | 77 | 1663.27 | SQ. M |
| 78 | 78 | \nExtra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. | 78 | 32 | EACH |
| 79 | 79 | \nExtra for FLOORING work for each consecutive floor above first floor including watering and scaffolding, all complete as per direction of E/I. | 79 | ||
| 80 | 80 | A. Second Floor | 80 | 1486.13 | Sqm |
| 81 | 81 | B. Third Floor | 81 | 371.835 | Sqm |
| 82 | 82 | \nSupplying, fitting & fixing 35mm thick solid core type decorative Single leaf flush shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with Aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I. | 82 | 618.37 | Sqm |
| 83 | 83 | \nProviding and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold ofmild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, includingM.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steelprimer after pre-treatment of the surface as directed by Engineerin-charge Fixing with adjustable lugs with split end tail to each jamb\n | 83 | 1746.24 | Mtr. |
| 84 | 84 | \nProviding and fixing wooden moulded beading to door frames with iron screws, plugs and priming coat on unexposed surface etc. complete. 50X20 MM | 84 | 1696.52 | R. M. |
| 85 | 85 | \nExtra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all edges of shutters (over all area of door shutter to be measured). | 85 | 358.814 | SQ. M |
| 86 | 86 | Providing and fixing 1mm thick PVC rigid foam sheet over w.c.'s door shutter using synthetic rubber based adhesive (Fevicol SR 998 or equivalent). | 86 | 321.826 | SQ. M |
| 87 | 87 | \nProviding and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i. e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | 87 | ||
| 88 | 88 | \nFor shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) | 88 | ||
| 89 | 89 | \nFor shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)\nPolyester powder coated aluminium\n(minimum thickness of polyester powder\ncoating 50 micron) | 89 | 3172.58 | K.G. |
| 90 | 90 | \nProviding and fixing glazing in aluminium window, ventilator shutters etc. with EPDM / Neoprene gasket etc complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): | 90 | 411.91 | SQ.M. |
| 91 | 91 | \nProviding and fixing aluminium hanging floor door stoppers ISI marked anodized (anodic coating not less than grade Ac 10 as per I.S. 1868) transparent or dyed to required colour and shade with necessary screws etc. Complete Twin rubber stopper | 91 | 100 | EACH |
| 92 | 92 | \nSupplying, fitting & fixing M.S. GRILL made of 20 x 6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I. | 92 | 11180.1 | KG. |
| 93 | 93 | \nProviding and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roof terraces etc. consisting of following operations.\nA) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water proofing compound conforming to IS : 2645 over the RCC slab including cleaning the surface before treatment.\nB) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with 50% of cement mortar of mix 1:5 ( 1 cement : 5 coarse sand ) admixed with proprietary water proofing compund conforming to IS :2645 over 20 mm thick layer of cement mortar 1:5 (1 cement : 5 coarse sand ) admixed with proprietary water proofing compund conforming to IS :2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs\nC) After two days of proper curing applying a second coat of cement slurry admixed with proprietary water proofing compound conforming to IS: 2645.\nD) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 ( 1 cement : 4 coarse sand ) admixed with proprietary water proofing compund conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300X300 mm square.\nE) The whole terrace so finished shall be flooded with water for minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the E/I. | 93 | 373.375 | SQ.M |
| 94 | 94 | \nProviding and laying pressed clay tiles (as per approved pattern 20mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement:4 coarse sand) mixed with 2% integral water proofing compound laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. | 94 | 433.998 | SQ.M |
| 95 | 95 | \nProviding and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. | 95 | 601.3 | SQ.M |
| 96 | 96 | \nGrading roof for water proofing treatment with\n22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | 96 | 30.065 | Cum |
| 97 | 97 | \nProviding & laying water proofing treatment in sunken portion of WCs, abathrooms etc. by applying cement slurru mixed with Armourcrete of M/S The Structural Water Proofing Company PVT. Ltd.or Tapecrete of M/s CICO Engg. Servce consisting of applying : | 97 | ||
| 98 | 98 | (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with Armourcrete or Tapecrete @ 0.125 kg/ sq.m. This layer will be allowed to air cure for 4 hours | 98 | ||
| 99 | 99 | (b)second layer of slurry of cement @ 0.242 kg/sqm mixed with Armourcrete or Tapecrete @ 0.126 kg/ sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. | 99 | ||
| 100 | 100 | The rate includes preperation of surface, treatment& sealing of all joints, corners, junctions of pipes & masonary with polymer mixed slurry. | 100 | ||
| 101 | 101 | (WORKS TO BE DONE BY REGISTERED APPLICATOR OF PIDILITE/ SIKA/ ROFF WITH 10 YRS. WRITTEN GUARANTEE.) | 101 | 448.535 | SQ.M |
| 102 | 102 | \nProviding 12mm cement plaster(1:3) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I. | 102 | 236.895 | SQ.M |
| 103 | 103 | \nProviding 1.5 mm th. cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I. | 103 | 236.895 | SQ.M |
| 104 | 104 | \nProviding applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth copmlete . | 104 | 10883.8 | SQ.M |
| 105 | 105 | \nProviding two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I | 105 | 16736.2 | SQ.M |
| 106 | 106 | \nFinishing walls with Premium Acrylic Smooth exterior paint with silicone additives \"Snowcryl - XT\" of M/S Snowcem India Ltd, or equivalent of required shade.New work (Two or more coats applied @1.43 ltr / 10sqm. Over and including base coat of water proofing cement paint Snowcem Plus or equivalent applied @ 2.20 kg./10 sq.m. ) | 106 | 5294.94 | SQ.M |
| 107 | 107 | \nProviding and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall suface to prepare the surface even amd smooth complete. | 107 | 8536.86 | SQ.M |
| 108 | 108 | \nFinishing walls with textured exterior paint of required shade :\n\nNew work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm | 108 | 3645.71 | SQ.M |
| 109 | 109 | \nProviding two coats of SYNTHETIC ENAMEL PAINT of approved shade and make over new WOODEN surface including cleaning the surface after removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification dirction of E/I. | 109 | 1509.71 | SQ.M |
| 110 | 110 | \nProviding Primer one coat of read lead paint of approved make over new STEEL SURFACE preparing the surface after cleaning, removing rust, dirt, scales, smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. | 110 | 264.579 | SQ.M |
| 111 | 111 | \nProviding 2 coats of SYNTHETIC ENAMEL PAINT of approved shade and make over STEEL SURFACE grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I. | 111 | 835.058 | SQ.M |
| 112 | 112 | \nProviding and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners, etc.) | 112 | 417.6 | K.G. |
| 113 | 113 | \nSteel work welded in built up sections as per drawing including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using steel in Ladder/ railing. | 113 | 4635 | K.G. |
| 114 | 114 | \nChequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). | 114 | ||
| 115 | 115 | \nLight shade pigment using white cement | 115 | 420.4 | Sqm |
| 116 | 116 | \nProviding & fixing on wall face unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socketed pipes. 110 mm dia | 116 | 416 | M |
| 117 | 117 | \nProviding & fixing on wall face unplasticised -P.V.C. moulde fittings / accessories for unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . | 117 | ||
| 118 | 118 | \nCoupler - 110 mm | 118 | 28 | EACH |
| 119 | 119 | \nSHOE - 110MM | 119 | 28 | EACH |
| 120 | 120 | \nBEND 110 MM | 120 | 48 | EACH |
| 121 | 121 | \nProviding and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand)\nand making good the wall etc. complete\n(110 mm ) | 121 | 216 | EACH |
| 122 | 122 | \nProviding and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.\n | 122 | ||
| 123 | 123 | Circular tank | 123 | 44000 | LTRS |
| 124 | 124 | \nProviding 150 mm wide BRICK DRAIN in cement mortar (1:6) with avarage 150mm. Clear depth and 125 mm apron including cost of earthwork involved with 75m cement concrete (1:4:3) over one brick designation 75A, flat soling in proper grade and slope at the base , the drain dully plastered in C.M.(1:3) with puning over exposed surface all complete as per building specification and direction of E/I. | 124 | 159.85 | M |
| 125 | 125 | \nProviding 250 mm wide brick drain in cement mortar (1: 6) with av. 150 mm. clean depth and 250 mm apron including cost of earthwork involved with 75 mm, cement concrete (1: 4: 3) over one brick designation 75A, flat soling in proper grade and slope at the base, the drain duly plastered in C.M (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. | 125 | 120.55 | Mtr. |
| 126 | 126 | \nMaking plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. | 126 | 237.044 | SQ.M |
| 127 | 127 | \nBrick edging - 7cm wide 11.4 cm deep to plinth protection with bricks of class designation 75 including grouting with cement mortar 1:4 (1 Cement : 4 fine sand) | 127 | 401.052 | METRE |
| 128 | 128 | Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I. | 128 | ||
| 129 | 129 | Bricks | 129 | 741.34 | Nos% |
| 130 | 130 | Local Sand | 130 | 606.058 | CU.M |
| 131 | 131 | Coarse Sand | 131 | 1705.95 | CU.M |
| 132 | 132 | Stone Chips | 132 | 1609.3 | CU.M |
| 133 | 133 | Stone Metal | 133 | 76 | CU.M |
| 134 | 134 | Cement | 134 | 989.656 | M.T. |
| 135 | 135 | Steel | 135 | 324.29 | M.T. |
| 136 | 136 | \nProviding designation 75A brick work in C.M (1:4) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. | 136 | 45.32 | CUM. |
| 137 | 137 | \nProviding P.C.C.M 150 in normal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I | 137 | 42.43 | CUM. |
| 138 | 138 | \nProviding 12mm thick cement plaster (1:3) with clean coarse sand of F.M. 1.5 approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. | 138 | 122.92 | SQM. |
| 139 | 139 | \nProviding 1.5 mm thick cement punning including curing, carriage of water with all leads and lifts of water as per building specification and direction of E/I. | 139 | 122.92 | SQM. |
| 140 | 140 | \nproviding and laying brick bats in soakpit with all leads and lifts including cost of all materials ,labour,royalty and taxes all complete as per building specification and direction of E/I | 140 | 30.12 | CUM. |
| 141 | 141 | \nSupplying, fitting and fixing C.I. cover with frame for mane hole and inspection chamber with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I. \n (a) Size 600 x 450 mm (Wt. 25 Kg). | 141 | ||
| 142 | 142 | Size 600 * 450 mm(Wt. 25 Kg) | 142 | 8 | Each |
| 143 | 143 | \nProviding P.C.C.M 200 in normal mix of (1:1.5:3) in foundation with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand to F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. | 143 | 120.08 | Cum |
| 144 | 144 | \nEmbankment construction with material obtained from Borrow Pits (Construction of embanlment with approved material obtained from borrow pits with all lifts and leads transporting to site, spreding , grading to required slope and compacting to meet requirement of table 300-2) | 144 | ||
| 145 | 145 | (i) Rolling with vibratory roller | 145 | 564.75 | Cum |
| 146 | 146 | \nProviding designation 75A one brick edge soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. | 146 | 688.5 | sqm. |
| 147 | 147 | \nFilling in foundation trenches and plinth layers not exceeding 150 mm thick well watered rammed fully compacted and fine dressed with earth obtained after cutting with in a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I ( Mode of measurement compacted volume) | 147 | 1486 | Cum. |
| 148 | 148 | \nProviding 12mm thick cement plaster (1:3) with clean coarse sand of F.M. 1.5 approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. | 148 | 214 | M2 |
| 149 | 149 | \nProviding 1.5 mm thick cement punning including curing, carriage of water with all leads and lifts of water as per building specification and direction of E/I. | 149 | 214 | M2 |
| 150 | 150 | Earth (1 KM) | 150 | 193.3 | Cum. |
| 151 | 151 | \nProviding tuck pointing (1:3) in cement on brick work clean coarse sand of F.M 1.5 FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I | 151 | 71.16 | sqm |
| 152 | 152 | \nProviding 12mm cement plaster(1:3) with clean course sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing taxes and royalty all complete as per building specification and direction of E/I. | 152 | 142.15 | sqm |
| 153 | 153 | \nDT: Basic rates for 125/115 mm dia Drilled Tube-well for drilling in all kinds of soil and rock for installation of hand pump with DTH ring Machine all complete including supplying all meterial, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and direction of engineer-in-charge. (Basic rates) | 153 | ||
| 154 | 154 | (i) Drilling up to 30 mtr. Depth below G.L. in Rural Area | 154 | 90 | P/M |
| 155 | 155 | \nSupplying, assembling, lowering and fixing in vertical position in borewell unplasticized PVC medium well screen (RMS) pipes with ribs, confirming to IS: 12818, including hire and labour charges, fittings and accessories etc. all complete, for all depths, as per direction of engineer-in-charge. | 155 | ||
| 156 | 156 | \n100 mm nominal size dia. - | 156 | 90 | Mtr |
| 157 | 157 | \nSupplying,filling, spreading and levelling stone boulders of of size range 5cm to 20 cm, in recharge pit, in the required thickness, for all leads and lifts, all complete as per direction of Engineer-in-charge. | 157 | 8.46 | cum |
| 158 | 158 | \nConstructing brick masonary chamber for Underground C. I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455X610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG. (weight of cover 23 kg. and weight of frame 15 kg) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand :10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: | 158 | ||
| 159 | 159 | Inside dimensions 455X610X mm and 45 mm deep for single pipe line with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 159 | 30 | Each |
| 160 | 160 | \nProviding and laying non- pressure NP2 class ( light duty ) R.C.C. pipes with collars jointed with still mixture of cenent mortar in the proportion of 1:2 ( lcement : 2 fine sand ) including testing of joints etc. complete. | 160 | ||
| 161 | 161 | \n150 MM dia R.C.C. pipe | 161 | 310 | Mtr |
| 162 | 162 | \n250 MM dia R.C.C. pipe | 162 | 150 | Mtr |
| 163 | 163 | Supply rate of 7029/ d.s.r./ page 31 + 10% c.p.\nSupplying fitting and fixing Galvanised wire mesh of average width of aperture 1.4 mm and nominal\ndia of wire 0.63 mm (2'-0\"x2'-0\"*2) in position as per specification and direction of E/I. | 163 | 2.22 | sqm |
| 164 | 164 | Water Supply & Sanitary work | 164 | ||
| 165 | 165 | \nSupplying, Fitting and Fixing vitreous white Glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. apporoved make with 100mm H.C.I \"p\" trape 15 liters C.I pull and let go flushing cistern of names or other I.S.S. equivalent make complete with all fittings, C.I. or C. C. brackets 32 mm alkathene/P.V.C. telescopic flush pipe anout 2 M long with one bragg couping and clamps G.I chain and pull including supplying and fixing a pair of vitreous whotr glazed earthenware ware footrest to be fixed in floor 15mm C.I body brass spindle stope cock weight not less then 50 grms, 15mm P.V.C. conection pipe 150 mm long and exposed pipe and cistern with two coates of apporoved paint over a coat of red oxide etc. all complete as per specification and direction of E/I. (A) 580 mm long (C) with12.5 lit. low level PVC cistern. | 165 | 48 | EACH |
| 166 | 166 | \nSupplying fitting and fixing 40mm high vitreous white glazed earthen E.W.C with ‘p’ trap of parry Hindustan or any other approved I.S.S. Make including supplying and fixing 15 liters C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S or bracket with telescopic flush pipe with brass couping and plumbers joints spindle stop cock of apporoved quality weight not less then 150 grams 15mm P.V.C. alkathene pipe 15 cm long wiyh brass couping at both ends and white plastic solid state seal and lead of commander / cucroo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of apporoved paint over a coat of red oxide primiing all complete as per specification and direction of E/I . (i) with 'P' trap (b) 12.50 lit low level PVC cistern. | 166 | 2 | each |
| 167 | 167 | \nProviding and fixing C.P. brass bib cock of approved conforming to IS 8931 \n15mm nominal bore approved brand C.P. fittings | 167 | 48 | EACH |
| 168 | 168 | 18.50.1/ D.S.R.\nProviding and fixing C.P.brass long nose bib cock of approved quality conforming to standard and weight not less thain 810gms. | 168 | ||
| 169 | 169 | 15mm nominal bore approved brand C.P. fittings | 169 | 64 | EACH |
| 170 | 170 | \nProviding and fixing C.P.brass long body bib cock of approved quality conforming to standard and weight not less thain 690gms. | 170 | ||
| 171 | 171 | 15mm nominal bore approved brand C.P. fittings | 171 | 96 | EACH |
| 172 | 172 | \nProviding and fixing P.T.M.T. / C.P. extentsion Nipples 15mm size with 12” BSP threads, 70mm length and 30 mm bredth and weight not less than 18gms | 172 | 130 | EACH |
| 173 | 173 | \nProviding and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | 173 | 16 | Each |
| 174 | 174 | \nProviding and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (a) 15mm nominal bore | 174 | 50 | Each |
| 175 | 175 | \nProviding and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end ) | 175 | ||
| 176 | 176 | \n25MM nominal bore | 176 | 16 | Each |
| 177 | 177 | \n32MM nominal bore. | 177 | 10 | EACH |
| 178 | 178 | \nProviding and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. | 178 | ||
| 179 | 179 | \n25mm nominal bore | 179 | 32 | EACH |
| 180 | 180 | \nProviding and fixing Mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. | 180 | ||
| 181 | 181 | Rectangular shape -453 X357 mm | 181 | 48 | EACH |
| 182 | 182 | \nProviding and fixing Wash basin with C.I/M.S brackets, 15mm C.P. pillar cock 32mm C.P brass waste of cutting and making good the wtherever require. | 182 | ||
| 183 | 183 | \nFalt back wash basin size 550x400mm with single 15mm pillar tap | 183 | 50 | EACH |
| 184 | 184 | \nProviding & fixing PTMT Grating of approved quality anc colour. | 184 | ||
| 185 | 185 | \nCircular type 125 mm nominal dia. With 25 mm waste hole. | 185 | 196 | EACH |
| 186 | 186 | \nProviding and fixing unplasticised P.V.C. connection pipe with c.p. nuts collar and bush of approved quality. | 186 | ||
| 187 | 187 | 15 mm nominal bore with 45 cm length. | 187 | 100 | EACH |
| 188 | 188 | \nProviding And fixing 32 mm waste pipe for sink or wash basin including P.V.C. waste fittings complete. | 188 | 100 | EACH |
| 189 | 189 | \nProviding and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (Approved Brand - ASTRAL/ SUPREME) (for outlet of water to outlet drain, vent pipe, etc.) | 189 | 960 | METER |
| 190 | 190 | \nProviding & fixing on wall face unplasticised -P.V.C. moulde fittings / accessories for unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . | 190 | ||
| 191 | 191 | Coupler - 110 mm | 191 | 120 | EACH |
| 192 | 192 | \nBEND 110 MM | 192 | 118 | EACH |
| 193 | 193 | \nSINGLE TEE with door 110X110X110\n | 193 | 90 | EACH |
| 194 | 194 | \nSINGLE TEE without door 110X110X110\n | 194 | 80 | EACH |
| 195 | 195 | PVC Door Bend 110mm dia ( Supreme ) | 195 | 30 | Each |
| 196 | 196 | 110mm dia PVC cowel ( Supreme ) | 196 | 18 | Each |
| 197 | 197 | Plain trap 110mm dia ( Supreme ) | 197 | 33 | Each |
| 198 | 198 | \nPvc trap including all fittings\n | 198 | 160 | EACH |
| 199 | 199 | \nProviding and fixing C.P. brass Stop Cock (concealed) of standard designand of approved make conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings. | 199 | 32 | EACH |
| 200 | 200 | \nProviding and fixing PTMT swivelling shower,15mm nominal size, 95mm long, 65mm dia. of approved quality, color & make weighing not less than 40 gms with approximate 80 holes of 1.2 mm dia. | 200 | 48 | EACH |
| 201 | 201 | \nProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL) | 201 | ||
| 202 | 202 | Concealed work including cutting chases and making good the wall etc.. | 202 | ||
| 203 | 203 | \n15mm dia | 203 | 695 | METER |
| 204 | 204 | \n20mm dia | 204 | 625 | METER |
| 205 | 205 | \n25mm dia | 205 | 1250 | METER |
| 206 | 206 | \n32 mm dia. | 206 | 600 | METER |
| 207 | 207 | (DSR 18.9.5)\n40 mm nominal outer dia Pipes | 207 | 60 | M |
| 208 | 208 | \nConstructing brick masonary chamber for Underground C. I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455X610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG. (weight of cover 23 kg. and weight of frame 15 kg) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand :10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: | 208 | ||
| 209 | 209 | \nInside dimensions 455X610X mm and 45 mm deep for single pipe with F.P.S. bricks | 209 | 60 | EACH |
| 210 | 210 | Providing and laying non- pressure NP2 class ( light duty ) R.C.C. pipes with collars jointed with still mixture of cenent mortar in the proportion of 1:2 (1 cement : 2 fine sand ) including testing of joints etc. complete. | 210 | ||
| 211 | 211 | \n150 MM dia R.C.C. pipe | 211 | 300 | Meter |
| 212 | 212 | \nProviding and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S.13983 with C.I. Brackets stainless steel plug 40mm including painting of fittings and brackets cutting and making goods the walls wherever required: 600x450x200mm | 212 | 48 | Each |
| 213 | 213 | \nProviding and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fitting arangement of approved quality colour and makeweighing not less than 88 gms. | 213 | 32 | EACH |
| 214 | 214 | Section III 200x150xmm dia Deep bore Well With Pump set & electrification etc works. | 214 | ||
| 215 | 215 | \nBasic rate item no. 119 M 1035 Suppling all materisls labour and tools and cost of drilling 200mm x 165mm bore well in all kinds of soil and rock in rural area for installation of pump set with hydrolic DTH rig machine, all complete including suplying all materials tools, drilling rig, Air compressor and equipments, as well as fuel, lubricants and cost of transprtation of Rig machine and other vehicles up to the site. | 215 | ||
| 216 | 216 | From 0.0M to 50.0 M belew G.L | 216 | 150 | P/M |
| 217 | 217 | From 51.0 M to200.00 M belew G.L | 217 | 450 | P/M |
| 218 | 218 | \nBasic rate item no. 120 M 1036\nsupplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe itc including all taxes, VAT, Excise duty, freight charges with inspection charges etc as applicable, etc all complete job. | 218 | 90 | P/M |
| 219 | 219 | \nCleaning Flushing and devloping of drilled hole for testing the discharge of water development of bore well by continueous flow of water bu using heavy compresser upto satisfaction of E/I. To get uniterrupted flow of water free from sand and soil etc. | 219 | 6 | Hr |
| 220 | 220 | \nSupplying and fitting M.S cap over 200mm dia casing pipe as per direction of E/I . | 220 | 3 | Each |
| 221 | 221 | \nSupplying 100 mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V + 10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump. | 221 | ||
| 222 | 222 | Submersible Pump 150 mm dia ( with Bronze impeller) up to 8 stages\n2.0 HP | 222 | 3 | Each |
| 223 | 223 | WD & SD \nBasic rate item no. 149 M 1065\nSupplying Fully Automatic Starter to operate induction motor working on 415v, 3 phase ,50 hz with no volt coil , Over load element , ON-OFF push buttons with necessary materials and connected to supply etc complete starter with original sheet steel encloser as per IS: 3914.\nF.A.S.D. Starter | 223 | 3 | Each |
| 224 | 224 | \nSupplying 3 core flat flexible submersible cable with, copper conductor, PVC insulated and PVC sheathed as per IS : 7098\n3 Core 4mm thick | 224 | 390 | M |
| 225 | 225 | \n2no heavy duty clamp 40mm dia duitable for pipe with all complet job. | 225 | 6 | Each |
| 226 | 226 | \nSupplying & lowering 40mm da column G. I. pipe with all complete job. | 226 | 225 | P/M |
| 227 | 227 | Note:- OF MAKE\n (1)PVC insuleted copper conductor wire of make:-Havell's/Polycab/Finolex \n (2)PVC conduit of thiknss 1.5mm/2mm for wiring:-Polycab/ANCHOR/AKG\n (3) GI modular box of make -: Anchor/ Havells/Legrand/ABB \n (4)Switches/soket outlet for modular type:- Anchor (roma)/Havells(cabtree)/Legrand/Schneider\n (5)MCCB,MCB,SFU,CHANGEOVER,RCCB,MCB-DB:-Havell's/L&T/Legrand/Schneider\n (6)XLPE/PVC aramoured cable:-Havell's/Polycab/V-guard\n (7) LED ITTING FIXTURE -: Havells/Bajaj/Crompton (Model/as per E/I )\n (8) CEALING / WALL / EXHAUST FAN -: Havells / Bajaj / Usha / Crompton (Model/as per E/I )\n (9)OCTAGONAL POLE-: Bajaj/Philips/Surya\n (10) CHEMICAL EARTHING OF MAKE - TRUEPOWER EARTHING\n (11) CENTRALISED AIR CONDITIONING OF MAKE - VOLTAS/MITSHUBISHI/ \n TOSHIBA/DAIKIN\n (12)ALL ELECTRICAL WIRING WORK SHOULD BE CONCEALED\n\n | 227 | ||
| 228 | 228 | \nPoint wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with modular type switch, pheonlic lamineted sheet,suitable size G.I.box etc. | 228 | ||
| 229 | 229 | \nGroup A | 229 | 1099 | Point |
| 230 | 230 | \nTwin control point wiring PVC conduit with modular type switch:-wiring for Twin control point with 1.5 sq mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, 2 way modular, switch, pheonlic lamineted sheet,suitable size G.I.box etc.as required. | 230 | 12 | Point |
| 231 | 231 | \nPower plug wiring in PVC conduit (2x4 sq mm) :- Wiring for light/Power plug with 2x4 sq mm FR PVC insuleted copper conductor single core cable in recess PVC conduit along with 1 Nos. 4 sq mm FR PVC insuleted copper conductor single core cable for loop earthing as required. | 231 | 1935 | Metre |
| 232 | 232 | \nCircuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required | 232 | ||
| 233 | 233 | \n2x1.5 sq mm+1x1.5 sq mm earth wire | 233 | 1148 | Metre |
| 234 | 234 | \n2x2.5 sq mm+1x2.5 sq mm earth wire \n(for LED building outar light) | 234 | 258 | Metre |
| 235 | 235 | \n2x2.5 sq mm+1x2.5 sq mm earth wire | 235 | 2719 | Metre |
| 236 | 236 | \n2x6 sq mm+1x6 sq mm earth wire | 236 | 1075 | Metre |
| 237 | 237 | \n2x10 sq mm+1x10 sq mm earth wire | 237 | 1097 | Metre |
| 238 | 238 | \nTV cable in existing conduit :- Supplying and drawing co-axial TV cable RG-6 grade copper conductor,PE insulated,with PVC sheath in the existing recessed PVC conduit as required. | 238 | 1754 | Metre |
| 239 | 239 | \nS/F PVC conduit :- supplying and fixing of following sizes PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case recessed conduit as required . | 239 | ||
| 240 | 240 | \n20mm | 240 | 1488 | Metre |
| 241 | 241 | \nS/F PVC/G.I. boxes :- Supplying and fixing PVC/G.I. box of following sizes on surface or in recess with suitable size of phenolic laminated sheet cover infront including painting etc as required . | 241 | ||
| 242 | 242 | \n75mm x 75mm x 50mm deep/ (4\" x 4\") | 242 | 49 | each |
| 243 | 243 | \nS/F modular type switch /socket :- Supplying and fixing following modular type switch box/cover including connections but excluding modular plate etc as required | 243 | ||
| 244 | 244 | \n5/6 amps, one way switch | 244 | 372 | Each |
| 245 | 245 | \n5/6 amps, socket | 245 | 372 | Each |
| 246 | 246 | \n15/16 amps, one way switch | 246 | 10 | Each |
| 247 | 247 | \nTV socket socket outlet | 247 | 49 | Each |
| 248 | 248 | \nS/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connectionons but excluding modular plate etc, as required. | 248 | 196 | Each |
| 249 | 249 | \nS/F Modular boxes, base & covre plate:-following size/ modular G.I box along with modular base & cover plate for modular switches in recess etc, as required. | 249 | ||
| 250 | 250 | \n1 or 2 module(78mm x 78mm x 45mm) | 250 | 49 | Each |
| 251 | 251 | 1.27.3\n6 module(78mm x 205mm x 50mm) | 251 | 64 | Each |
| 252 | 252 | \nS/F light plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch conection painting etc, as required. | 252 | 112 | Each |
| 253 | 253 | S/F power plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch conection painting etc, as required. | 253 | 161 | Each |
| 254 | 254 | \nS/F ceiling rose:-\nSupplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required. | 254 | 343 | Each |
| 255 | 255 | \nS/F Batten holder:-\nSupplying and fixing batten/angle holder including connection etc, as required. | 255 | 384 | Each |
| 256 | 256 | \nS/F Dingdong Call bell :-\nSupplying and fixing dingdong call bell suitable for DC/AC single phase,230 volt, complete as required. | 256 | 48 | Each |
| 257 | 257 | \nErrection on incandescent light fitting:-\nErrection of wall bracket/ceiling fitting, complete with all accessories including connection etc as required. | 257 | 119 | Each |
| 258 | 258 | \nITC fluorescent fitting directly on surface:-\nInstaliation, testing and commissioning of prewired, fluorescent fitting of all types, complete with all accessosries and tube etc. directly on ceiling /wall including connection with 1.5 sq mm.FR PVC insulated, copper conductor. | 258 | 160 | Each |
| 259 | 259 | \nITC ceiling fan:-\nInstaliation, testing and commissioning of ceiling fan including wiring the down rod of standard length( uptwo 30 cm) with 1.5 sq mm.FR PVC insulated copper conductor, single core cable etc as required | 259 | 128 | Each |
| 260 | 260 | \nITC exhaust fan up to 450 mm, sweep:-\nInstallation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required. | 260 | 97 | Each |
| 261 | 261 | \nS/F S.P. MCB DB:-\nSupplying and fixing following way single pole nutral,sheet,MCB distribution board,240 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR) | 261 | ||
| 262 | 262 | \n8 Way,Double door | 262 | 97 | Each |
| 263 | 263 | \nS/F 'B' series. S.P.MCB:-\nSupplying and fixing 6 amps to 32 amps rating,240 volts, 'B' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required. | 263 | ||
| 264 | 264 | \n6/32 amps,single pole, \"B\" SERIES | 264 | 422 | Each |
| 265 | 265 | \nS/F 'C' series. S.P.MCB:-\nSupplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required. | 265 | ||
| 266 | 266 | \n6/32 amps ,DP | 266 | 32 | Each |
| 267 | 267 | \n40 amps ,DP | 267 | 48 | Each |
| 268 | 268 | \n50/63 amps, DP | 268 | 17 | Each |
| 269 | 269 | \nS/F SP MCB blanking plate:-\nSupplying and fixing Single pole blanking plate in exiting MCB DB complete etc as required. | 269 | 160 | Each |
| 270 | 270 | \nP/F M.V. danger notice plate:-\nProviding and fixing M.V danger notice plate of 200mm x150mm made of mild steel, at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in single red coiour on front side as required. | 270 | 3 | Each |
| 271 | 271 | \nS/L 8 SWG copper wire ground :-\nSupplying and laying 8 SWG copper wire 0.50 metre bellow ground level for conductor earth electrode, including soldring etc. as required. | 271 | 60 | Metre |
| 272 | 272 | \nP/F G.I. lightning conductor finial:-\nProviding and fixing of lighting cnductor finial, made of 25 mm dia 300mm long, copper tube having single prong at top, with 85mm dia 3mm thick G.I. base plate including holes etc. complete as required. | 272 | 9 | Each |
| 273 | 273 | \nReverting, sweating and soldering of copper/G.I. tape(with another coppr/G.I. tape, base of the finial or any other metallic object) as required. | 273 | 90 | Each |
| 274 | 274 | \nP/F G.I. lightning conductor tape in horizontal run:-\nProviding and fixing copper tape 20mm x 3mmthick on parapet or surface of wall for lightning conductor complete as required(For horizontal run) | 274 | 465 | Metre |
| 275 | 275 | \nP/F G.I lightning conductor tape in vertical run:-\nProviding and fixing copper tape 20mm x 3mmthick on parapet or surface of wall for lightning conductor complete as required(for vertical run) | 275 | 156 | Metre |
| 276 | 276 | \nP/F Testing joint for G.I. lighting conductor:-\nProviding and fixing testing joint, made of 20mm x 3mm thick G.I. strip, 125mm long, with 4 nos.of G.I. bolts, nuts, chek nuts and spring washers etc complete as required. | 276 | 9 | Each |
| 277 | 277 | \nMV cable laying upto 120 sq.mm. in ground:-\nLaying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size not exceeding 25 sq.mm.but not exceeding 120 sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required. | 277 | 755 | Metre |
| 278 | 278 | \nSupplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required | 278 | 6 | Each |
| 279 | 279 | \nSupplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. | 279 | ||
| 280 | 280 | \n3½ X 50 sq. mm (35mm) | 280 | 6 | Each |
| 281 | 281 | \n3½ X 70 sq. mm (38mm) | 281 | 6 | Each |
| 282 | 282 | \nS/L PVC XLPE insuletd PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts,(conforms to IS:1554, part-1) | 282 | ||
| 283 | 283 | \n50 sq.mm. 3.5 core | 283 | 90 | Metre |
| 284 | 284 | \n70 sq.mm. 3.5 core | 284 | 800 | Metre |
| 285 | 285 | \nProviding of 12'' (300 mm)exhaust fan of make bajaj/havells/usha/crompton | 285 | 97 | Each |
| 286 | 286 | \nSITC of 48'' (1200 mm) ceiling fan of make bajaj/havells/usha/crompton | 286 | 196 | Each |
| 287 | 287 | \nSITC of Reces/surfaces mounted LED round down light (15/16 watt) of make bajaj/havells/crompton | 287 | 119 | Each |
| 288 | 288 | \nSITC of LED street light (90/100 watt) of make bajaj/havells/crompton | 288 | 10 | Each |
| 289 | 289 | SITC of LED TUBE LIGHT (20/22 watt) of make bajaj/havells/crompton | 289 | 247 | Each |
| 290 | 290 | \nSupplying and fixing of LED 15/16 W of make bajaj/havells/crompton | 290 | 562 | Each |
| 291 | 291 | \nEarthing with copper earth plate 600x600x3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc (with charcoal or coke and salt) as required….. | 291 | 15 | Set |
| 292 | 292 | ITC LED 25/ 90W street ligt on wall with 25 mm dia .75meter long GI pipe bend, J /U Hook 4 nos., along with two coat painting of GI pipe bend etc as required | 292 | 10 | Each |
| 293 | 293 | \nMian Panel(LS)Power Distribution Board (PDB at GL) - Supplying, designing, manufacturing, installation, testing, fitting, fixing and commissioning in correct alignment position, effecting proper connection of all incomers and outgoing of PDB panel of 16 SWG CRCA Sheet steel IP-54 floor mounting cubical type LT Panel suitable for operation on 415V, 50Hz, 3Ph, AC supply and fault level 35kA. Apporexmate size (Shall be given at the time of work order ) with front operated construction including seperate fabrication arrangement for fixing of switchgears and meters. The sheet steel under go minimum seven tanks treatement followed by finishing poder coating of minimum 60 microns thickness duly compart mentalized with locking arrangement duly fixed on base channel size 100mm X 75mm X 6mm having accessories mounted inside cubicale panel, earthing with 2 Nos. of earth studs.\nAll opening shall be covered by soft rubber gaskit,enclosure shall be galvanished. Panel shall have suitable cable entry from top and bottom and suitable arrangement for multiruns aluminium cables for MCCB. | 293 | ||
| 294 | 294 | The panel includes 415V, 200A, 3Ph, 36KA, 50Hz Electrolytic Aluminium Bus Bar (E91EWP) Aluminium Earth Bus with removable glands plates, cable glands at sending and receiving ends, including connection with outgoing feeders complete in all respects. The electrolytic Aluminium bus bar of grade 63401 WP as per I:S 5082 of suitable length and insulated by heat shrinkable sleeves Red, yellow, Blue and Black as R Y B & N. The current density of bus bar shall be minimum 0.8 A / sq mm. All inter connections from main Bus Bar to MCCB up to 100A shall be with suitable size of Bus Bar and below 100A MCCB the interconnection shall be made with 4, 6 & 10 Sq mm PVC Cu. wire. | 294 | ||
| 295 | 295 | Incomers:- 160A, 35 kA FP MCCB adjestable thermal seting - 1 no, with front rotary handle with thermo magnetic releas160 AMP FP CHANGEOVER SWITCH 1 No. \nOutgoings:- 16nos-32Amps DPMCB , SP MCB 10KA-16 Nos,3amp Auto chengeover 16 No.s, DP MCB Isoletor 4 nos,Digital Am-meter, three phase, and Digital Volt-meter, three phase 3 nos-Phase indicating light with 2 A SP MCB's for protection 3 nos .Make- AE / Vaishno/C&S/ CHINT 3 nos-CT 1500/5VA -5 class Epoxy resin cast CT (3 Nos.)=2 Set. Make:-Kappa / Matrix . Provisioning of Space for 16 nos Electronic meter in Panel+ cost of 16 gauge iron sheet to be fabricated for panel mountred switch disconnector, including bus bar chamber, insulation painting etc as required( but without bus bar copper strip)(ALL SWITCHGEARS SHOULD BE LEGARAND, SCHINEDER ,SIEMENS MAKE) PANEL BUILDER MAKE- STECH POWER INDUSTRIES /,MEDITRON/TRANZITE/JMD ELECTROTECH | 295 | 2 | SET |
| 296 | 296 | The panel includes 415V, 200A, 3Ph, 36KA, 50Hz Electrolytic Aluminium Bus Bar (E91EWP) Aluminium Earth Bus with removable glands plates, cable glands at sending and receiving ends, including connection with outgoing feeders complete in all respects. The electrolytic Aluminium bus bar of grade 63401 WP as per I:S 5082 of suitable length and insulated by heat shrinkable sleeves Red, yellow, Blue and Black as R Y B & N. The current density of bus bar shall be minimum 0.8 A / sq mm. All inter connections from main Bus Bar to MCCB up to 100A shall be with suitable size of Bus Bar and below 100A MCCB the interconnection shall be made with 4, 6 & 10 Sq mm PVC Cu. wire. | 296 | ||
| 297 | 297 | Incomers:- 160A, 35 kA FP MCCB adjestable thermal seting - 1 no, with front rotary handle with thermo magnetic releas160 AMP FP CHANGEOVER SWITCH 1 No. \nOutgoings:- 16nos-32Amps DPMCB , SP MCB 10KA-16 Nos,3amp Auto chengeover 16 No.s, DP MCB Isoletor 4 nos,Digital Am-meter, three phase, and Digital Volt-meter, three phase 3 nos-Phase indicating light with 2 A SP MCB's for protection 3 nos .Make- AE / Vaishno/C&S/ CHINT 3 nos-CT 1500/5VA -5 class Epoxy resin cast CT (3 Nos.)=2 Set. Make:-Kappa / Matrix . Provisioning of Space for 16 nos Electronic meter in Panel+ cost of 16 gauge iron sheet to be fabricated for panel mountred switch disconnector, including bus bar chamber, insulation painting etc as required( but without bus bar copper strip)(ALL SWITCHGEARS SHOULD BE LEGARAND, SCHINEDER ,SIEMENS MAKE) PANEL BUILDER MAKE- STECH POWER INDUSTRIES /,MEDITRON/TRANZITE/JMD ELECTROTECH | 297 | 1 | SET |
| 298 | 298 | Add 12% GST | 298 | 1 | Nos |
| 299 | 299 | Add 1% Lebour Cess | 299 | 1 | Nos |
AI Tender Summary
Tender Timeline
May 27, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 14, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 16, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender