Indian Oil Corporation Limited-IOCL has published Engg Oso Electrical Works In Connection With Additional 1 X 6000 Kl Cone Roof Ifr Tank At Balasore Depot Under Odisha State Office Electrical Works In Connection With Additional 1 X 6000 Kl Cone Roof Ifr Tank At Balasore Depot Under Odisha State Off. Submission Date for this Tender is 31-05-2021. Electrical Maintenance Tenders in IOCL Balasore Depot Somnathpur Odisha. Bidders can get complete Tender details and download the document.
| NAME OF WORK: Electrical works in connection with additional 1 x 6000 KL Cone roof IFR Tank at Balasore Depot under Odisha State Office | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Electrical Works | 1 | ||
| 2 | 2 | 415V MCC ( Loc : Existing Substation) | |||
| 3 | 3 | Design, Supply, Installation, testing & commissioning of CRCA sheet steel enclosed, floor mounted, free standing MCC, including transportation from store/yard to site at the place of installation, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including installation on foundations or steel structures, aligning, leveling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per attached specifications and directions of Engineer-in-Charge. Incomer 63A MCCB ,415V , 3ph , 50Hz Outgoing : 2Nos 7.5kw DOL, 2 Nos 1.1kw DOL,8 Nos 32A MCCB | 1 | Nos. | |
| 4 | 4 | MOVDB & ROSOVDB | |||
| 5 | 5 | Design, Supply, Installation, Testing & Commissioning of 415V, 32A, 10 kA for 1 sec. Al busbar, IP-65, Outdoor Type, Flameproof type suitable for Zone-2, Gas Group-IIA/ IIB/ IIC, Temperature Class-T3, Floor/ wall mounted Sub Distribution Board as per attached specifications and directions of Engineer-in-Charge. \nIncomer : 1 No. 32A, 4P Motorsied MCCB\nOutgoing : 12 Nos. 16A, 4P MCBs | 2 | Nos. | |
| 6 | 6 | 5 KVA AC UPS System | |||
| 7 | 7 | Design, Supply, Installation, Testing & Commissioning of 5 KVA, 415 V AC UPS with bBattery and ACUPSDB. System input & Output: 415 Vac,50 Hz,3 Phase Output, stand alone UPS comprising static rectifiers, battery, static inverters, static switches, Static by pass switch, 100% Sealed Lead Acid Battery Banks with 30 Minutes battery back up, AC distribution board, Isolation transformer with voltage stabilizer in bypass, and all other equipment / accessories, as per required as per attached specifications and directions of Engineer-in-Charge. | 1 | Nos. | |
| 8 | 8 | Power cables FRLS | |||
| 9 | 9 | Design, Supply and Laying of 1.1 kV) grade, stranded Cu / Al. Conductor, FRLS, XLPE insulated, PVC inner sheath, steel / wire armoured, PVC outer sheath LV power cables.of following sizes in ground/tray including fixing of strip number tags, fixing of saddles and saddle bars, fixing of route markers, protective tiles etc. including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per attached specifications and directions of Engineer-in- charge. Before procurring the cable, Contractor to make cable schedule as per site conditions and get approved by IOCL/Consultant. | |||
| 10 | 10 | 3CX2.5 Sq. mm Cu | 220 | Mtrs | |
| 11 | 11 | 3CX4 Sq. mm Cu | 440 | Mtrs | |
| 12 | 12 | 3.5CX25 Sq. mm Al | 2400 | Mtrs | |
| 13 | 13 | 3.5CX70 Sq. mm Al | 450 | Mtrs | |
| 14 | 14 | 3.5CX95 Sq. mm Al | 530 | Mtrs | |
| 15 | 15 | 4CX2.5 Sq. mm Cu | 1100 | Mtrs | |
| 16 | 16 | 4CX4 Sq. mm Cu | 1550 | Mtrs | |
| 17 | 17 | 7C X 2.5 Sq. mm Cu | 1400 | Mtrs | |
| 18 | 18 | 8C x 1.5 Sq. mm Cu | 750 | Mtrs | |
| 19 | 19 | 8 Pair x 1.5 sq mm Cu (Signal Cable) | 220 | Mtrs | |
| 20 | 20 | CABLE GLANDING AND TERMINATION | |||
| 21 | 21 | Cable termination, connections and testing of 1.1kV grade,Al. OR Cu.conductor, XLPE insulated, GI strip/ round wire armoured,FRLS power,control & interfacing cables of following sizes andparticulars including drilling / tapping of gland plate for cable entry as required, fixing of cable glands& terminals supplied loose at equipment end but excluding supply of cable glands. Cable termination also includes supply of cable lugs with stripping of insulation, taping, soldering OR crimping of tinned Cu. /Al. (as required), , ferruling,supply of GI nuts, bolts, washer,screws, insulating tapes, compounds, solders, fluxes, ferrules etc.Closing of unused cable entries to make the equipment dust, moisture &vermin proof, all work, labour and materials complete as per codes & standards and instructions / directions of engineer-in-charge. | |||
| 22 | 22 | 3CX2.5 Sq. mm Cu | 44 | Nos. | |
| 23 | 23 | 3CX4 Sq. mm Cu | 16 | Nos. | |
| 24 | 24 | 3.5CX25 Sq. mm Al | 10 | Nos. | |
| 25 | 25 | 3.5CX70 Sq. mm Al | 4 | Nos. | |
| 26 | 26 | 3.5CX95 Sq. mm Al | 2 | Nos. | |
| 27 | 27 | 4CX2.5 Sq. mm Cu | 30 | Nos. | |
| 28 | 28 | 4CX4 Sq. mm Cu | 50 | Nos. | |
| 29 | 29 | 7C X 2.5 Sq. mm Cu | 8 | Nos. | |
| 30 | 30 | 8C x 1.5 Sq. mm Cu | 8 | Nos. | |
| 31 | 31 | CABLE GLAND -industrial | |||
| 32 | 32 | Supply of flame proof double Compresion Ni Plated brass cable glands ofthe following size of XLPE,Arm,FRLS cables | |||
| 33 | 33 | 3CX2.5 Sq. mm Cu | 44 | Nos. | |
| 34 | 34 | 3.5CX25 Sq. mm Al | 8 | Nos. | |
| 35 | 35 | 3.5CX70 Sq. mm Al | 4 | Nos. | |
| 36 | 36 | 3.5CX95 Sq. mm Al | 1 | Nos. | |
| 37 | 37 | 4CX2.5 Sq. mm Cu | 4 | Nos. | |
| 38 | 38 | 4CX4 Sq. mm Cu | 7 | Nos. | |
| 39 | 39 | 7C X 2.5 Sq. mm Cu | 4 | Nos. | |
| 40 | 40 | 8C x 1.5 Sq. mm Cu | 8 | Nos. | |
| 41 | 41 | CABLE GLAND -Flameproof | |||
| 42 | 42 | Supply of flame proof double Compresion Ni Plated brass cable glands ofthe following size of XLPE,Arm,FRLS cables | |||
| 43 | 43 | 3CX4 Sq. mm Cu | 16 | Nos | |
| 44 | 44 | 3.5CX25 Sq. mm Al | 2 | Nos | |
| 45 | 45 | 3.5CX95 Sq. mm Al | 1 | Nos | |
| 46 | 46 | 4CX2.5 Sq. mm Cu | 26 | Nos | |
| 47 | 47 | 4CX4 Sq. mm Cu | 43 | Nos | |
| 48 | 48 | 7C X 2.5 Sq. mm Cu | 4 | Nos | |
| 49 | 49 | Local control station (LCS) | |||
| 50 | 50 | Supply and Installation of Industrial Local control station provided with L/R switch,START STOP PB, 3 mm thick Canopy with side cover, including industrial double compression stainless steel cable glands & plugs as required | 4 | No | |
| 51 | 51 | Cable Trays | |||
| 52 | 52 | Design, Supply and Installation of G.I. ladder type Cable Tray 65x30x2mm thick runners, Rungs at 300mm spacing, Min.2500mm length along with required Coupler Plate with stainless Hard-ware ,Hold on clamps With stainless Hard- ware , Horizontal /Vertical - Inside / Outside bends etc. suitable for following G.I. Cable Tray and Tray cover as per attached specification of this tender | |||
| 53 | 53 | Heavy Duty Ladder type cable tray and cover (2.5m piece of length) | |||
| 54 | 54 | 150mm Wide | 45 | Mtrs | |
| 55 | 55 | 3mm Thick Cover for 150 wide G.I. ladder type cable tray | 45 | Mtrs | |
| 56 | 56 | Earthing system | |||
| 57 | 57 | Design, Supply, Installation & testing of 100 NB,3.8M. long G.I. pipe Earth Electrode in Earth pit(for equipment earthing, ) Including handling ,Transportation to Erection site ,Excavation of Earth pit in all types of soil ,back filling of pit with common salt, charcoal / coke and loose Earth after Installation of Electrode there in, removal of surplus Earth away from Erection site, consolidation of loose Earth on back filled pit, making of bricks work, Inspection chamber on back filled pit and cover of CI (450mmx450mm) ,there of complete with lifting hook, fixing & connecting inside the chamber of G.I. Earth bracket and other accessories of the Earth Electrode, painting of Earth pit No. and Earthing symbol on the cover, , Supply of salt, charcoal /coke, bricks, sand, cement, stone chips, reinforcement rods, lifting hook, necessary stainless steel hardware, paints etc.all works, labour & materials complete as per Drawing and direction of consultant/owner.Bidder shall note that the excavation may be for hard or soft soil and rate is inclusive of excavation of Earth pit. Bidder Scope includes Earthing Designing and taking necessary approval by TPI | |||
| 58 | 58 | Equipment Earth pit | 5 | Nos, | |
| 59 | 59 | Design, Supply, Installation and testing of GI earth strip / laying of earthing cable of following sizes enclosed in burried trenches or in floor slits, on cable racks/ risers/ trays , on brick / concrete wall , on RCC/steel columns , on RCC/steel towers and vessels, under concrete floors, or paved areas, across pipe joints and valves, directly buried under ground at depth of 500 mm, including handling, transportation to erection site , bending, straightening, cutting to size, welding together of earth strips in overlapping manner, chipping in concrete floors/ paved areas for laying the earth strips under floors/ paved areas and making good by cement plastering concrete after laying of the strips ; clamping and supporting of earth strips laid above ground, connecting the strips/ wire at both ends to equipment or to earth bus / earth plates or to GI brackets fixed inside earthpit chamber, by bolting etc., Hessian tapes, all necessary GI hardware, GI clamps, civil masonry materials, etc. all work, labour as per directions of owner/consultant. Rate of excavation and back filling of GI strip/earthing cable is excluded. Bidder Scope includes Earthing Designing and taking necessary approval by TPI. | |||
| 60 | 60 | 50 x 6 mm GI Strip | 1500 | Mtrs | |
| 61 | 61 | 40 x 5 mm GI Strip | 100 | Mtrs | |
| 62 | 62 | 10mm*3/8") Gi wire | 75 | Mtrs | |
| 63 | 63 | No 8 SWG solid GI wire | 90 | Mtrs | |
| 64 | 64 | Earthing Lugs | 50 | Nos | |
| 65 | 65 | Supply ,and Installation of GI Earth Bus bars (size: 390x50 x12mm thick) Including handling, transportation, drilling of necessary holes/enlargement existing holes as required; all associated work for fixing the Bus bars in position e.g. cutting, leveling, aligning, chipping, grouting, welding bolting etc.; making good of broken/chipped portion on walls /columns by cement plastering. Supply of all necessary hardware (GI), paints, civil masonry materials etc. all work, labour complete as per drawings and attached specifications of this tender and directions of Engineer In Charge | 2 | Nos. | |
| 66 | 66 | GI Cable Protection Pipes | |||
| 67 | 67 | Supply and installation of 100NB GI pipe with all necessary accessories like bends,couplings, etc for cabling of LCS and motor. | 100 | Mtrs | |
| 68 | 68 | Supply and installation of 50mm GI pipe sleeves with all necessary accessories like bends,couplings, etc for cabling of motor. | 20 | Mtrs | |
| 69 | 69 | Canopies | |||
| 70 | 70 | Supply of Sheet steel canopies made of 14 SWG MS Sheet, epoxy painted shall be provided for all junction boxes, local control stations and others electrical equipment's located outdoor. | 15 | Nos. | |
| 71 | 71 | FABRICATION OF STRUCTURAL STEEL | |||
| 72 | 72 | Supply and transporting to erection site , including handling, inspection, cutting to required shape & size, providing supporting arrangements grinding, welding, drilling holes etc. for fabrication work, transporting the fabricated steel structural to erection site, installation in position on floors, walls, ceilings, roofs, columns, existing structures, on towers, vessels, in ready made trenches, in floor sites etc. by hoisting, welding, bolting, riveting, grouting etc., minor repair / denting, as required, breaking of walls / floors / ceilings / columns & making good the same by cement plastering, supply of nuts, bolts, washers, screws, fasteners, civil masonary materials, fabrication & installation of MS cable rack, cable rack supports, risers, hangers, base frames, supports, brackets, pedestals, frameworks etc. made out of channels, angles, flats, plates, rods, etc. for cables, pipes, electrical equipment, lighting fittings & their accessories, earthing materials, cable trays etc., surface treatment of steel structural works including surface cleaning, supply & one coat of epoxy based primer & one coats of epoxy based finish paint, all work, labour and materials complete as per drawings,standards and instructions / directions of ENGINEER IN CHARGE. | |||
| 73 | 73 | ISMC 100 / ISA 75x75x8 L / Any other size of Structural steel material | 0.5 | MT | |
| 74 | 74 | Supply and Installation of Cable Route Marker (At every 30 mtr. Of trench routing & at evry cable bend) | 40 | Nos | |
| 75 | 75 | Supply and Installation of Pull pit box of following sizes for cable pulling | |||
| 76 | 76 | 500x500x1000 | 3 | Nos | |
| 77 | 77 | 750x750x1000 | 4 | Nos | |
| 78 | 78 | Providing and laying NP2 / NP3 class R.C.C. pipes with collars jointedwith stiff mixture of cement mortar in the proportion of 1:2 (1 cement :2 fine sand) including testing of joints etc.complete: Medium Duty,Laying Mechanically/manual | |||
| 79 | 79 | 150mm Hume pipe NP2 | 40 | M | |
| 80 | 80 | Civil work | |||
| 81 | 81 | Earth work in excavation at any depth by mechanical means (Hydraulic excavator) / manual means over areas including Back Filling (excluding rock)in foundation trenches, pole foundation, cable tray supports structures, etc.. in layers not exceeding 20cm in depth, consolidation each deposited layer by ramming and watering and disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed. For all Lift and Lead.\nAll kinds of soil including ordinary rock. | 350 | CUM | |
| 82 | 82 | Supplying and Local sand filling within the grading zone V of fineaggregates specified in table 3.1 , clause 3.1.3 of attachedspecifications, in plinth, under floors etc. in layers not exceeding20cm in depth, each deposited layer to be compacted by rammingwateringand dressing complete | 140 | SQM | |
| 83 | 83 | Providing and laying Brick work with bricks of class designation 50 bricks in Cement mortar 1:4 (1cement : 4 coarse sand) | 22 | SQM | |
| 84 | 84 | LIGHTING Works | |||
| 85 | 85 | AREA LIGHT POLES Supply & Installation of of 9.0 meter height M.S lighting pole with earthing arrangement as per IS:2713 and with Single arm (bracket)suitable for mounting of Weatherproof LED street lighting fixture as mentioned below. Lighting pole shall be supplied along with all required hardwares for installation of lighting pole like foundation Nuts &bolts,Washers,FLP JBs, WP Ni plated brass cable glands, Cable lugs,stopping plug for un-used cable entries etc complete along withmounting hardwares for lighting fittings.The pole shall be painted withfinal coat of primer and two coats of Aluminium paint as directed, the portion under ground shall be painted with bitumen paint inside & outside | 10 | EA | |
| 86 | 86 | AREA LIGHT POLES Supply and Installation of of 9.0 meter height M.S lighting pole with earthing arrangement as per IS:2713 and with Double arm (bracket)suitable for mounting of Weatherproof LED street lighting fixture asmentioned below. Lighting pole shall be supplied along with all required hardwares for installation of\nlighting pole like foundation Nuts &bolts,Washers,WP JBs, WP Ni plated brass cable glands, Cable lugs,stopping plug for un-used cable entries etc complete along withmounting hardwares for lighting fittings.The pole shall be painted withfinal coat of primer and two coats of Aluminium paint as directed, theportion under ground shall be painted with bitumen paint inside & outside. | 12 | EA | |
| 87 | 87 | Supply ,Installation and commissioning of supplied new LED lighting or lightingsystem for Non-FLP/WP LED 45W;250V, AC including housing,allAccessories all complete for Yard Light or where ever required as per the direction of Engg - in -Charge | 34 | EA | |
| 88 | 88 | Supply , Installation and commissioning of 34W, 3700 Lumens LED Well Glass light \nfittings with integral driver of same make with product efficacy Greater than 110 Lumens/Watt and mimuimIP65 Rated complete with all its accessories \nto Philips Model BY300PLED37S or equivalent make. | 6 | EA | |
| 89 | 89 | YLDB (Loc : Substation Room) Design, Supply, Installation, testing & commissioning of CRCA sheet steel enclosed, wall mounted, indoor YLDB , 415V, 50 Hz, 3 Ph, 4 Wire, 50kA for 1 sec. AL. bus bar, IP 42, indoor, distribution board with incomer 32A MCCB and 6Nos outgoing 4P of 10A with photocell timer including transportation from store/yard to site at the place of installation, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, testing and calibration of relays and meters etc., including all labour and materials, as per directions of Engineer-in-Charge. | 1 | EA | |
| 90 | 90 | Design, Supply, Installation, Testing & Commissioning of 415V, 50 Hz, 3 Ph, 4 Wire, 32 A, 16 kA for 1 sec.Al busbar, IP-42, Indoor Type, distribution board as per directions of Engineer-in-Charge.\nIncomer : 1 No. 32A, 4P MCB\nOutgoing : 6 Nos. 16A, SPN MCBs | 1 | EA | |
| 91 | 91 | Supply & Installation of Weather proof 16A, 240V 4-way, 125 mm (minimum) internal dimensionsjunction boxes with terminals block with additional earthing terminalsand end clamps etc. including 4 Nos. W.P. double compression stainlesssteel cable glands suitable for 3x2.5 sq. mm (cu.) XLPE, FRLS cable,canopy. | 5 | EA | |
| 92 | 92 | Supply & Installation of 240V, 3-pin, 16A/6A weather proof switch socket and plug | 1 | EA | |
| 93 | 93 | Supply & Installation of PVC rigid conduit of min. 2mm thick of wall heavy duty type &as per latest IS (with bends, reducers, couplers etc.) of followingsizes:-\nSize: 50 mm Dia. PVC Rigid Conduit | 40 | M |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
