Rural Development Department has published Providing Internal And External Electrification And Electrical Appliances To Primary Health Centre Main Building At. Shindad Tal. Pachora Dist. Jalgaon . Submission Date for this Tender is 27-05-2021. Electrification Work Tenders in Executive Engineer, Works Division, ZP Jalgaon Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supplying and erecting UPVC reinforcedflexible conduit 25 mm in dia. conforming toI.S. with requirednumberof couplings, PVC bushes, check nuts etc. complete. |
| 2 | Supplying & erecting I.S.I. mark Rigid P.V.C. conduit 25 mm. dia.with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC, para no. 1.2.1 |
| 3 | Supplying & erecting mains with 2x1.5 sq.mmF.R copperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 4 | Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 5 | Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 6 | Supplying & erecting Green Colour earthing with 1x2.5 sq.mmF.R copperPVC insulated wire laid in provided conduit /trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 7 | Supplying and erecting ISI mark modular type switch 6A/10A duly erected on provided plate and box with wiring connections complete. |
| 8 | Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete. |
| 9 | Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter duly erected on provided plate and box with wiring connections complete. |
| 10 | Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 11 | Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 12 | Supplying and erecting ISI mark modular type blanking plate one module, duly erected on provided plate & box. |
| 13 | Supplying and erecting unbreakable concealed type modular switchbox withdoublemountingplatefor4 moduleduly erected flush to wall with required chiselling and finishing with cement mortar /POPasperrequired tomatch the background. |
| 14 | Supplying and erecting unbreakable concealed type modular switchbox withdoublemountingplatefor6 moduleduly erected flush to wall with required chiselling and finishing with cement mortar /POPasperrequired tomatch the background. |
| 15 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar /POPasperrequired tomatch the background. |
| 16 | Supplying and erecting 16/20/25 A starter ( modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected. |
| 17 | Supplying and erecting 6 to 32 A SPMCB suitable to fix in 1 module of modular switch in provided box complete & duly concealed with necessary material and connected. |
| 18 | Supplying and erecting modular type electronic step regulator for fan two module ISI mark approved make duly erected on provided plate and box with wiring connections complete. |
| 19 | Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch,earthing and required accessories as per specification No: WG-PW/CW |
| 20 | Wiring for plug on board withSwitch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW |
| 21 | Supplying & erecting telephone copper cable 4 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW |
| 22 | Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC |
| 23 | Supplying and erecting ISI mark modular type blanking plate one module, duly erected on provided plate & box. |
| 24 | Supplying & erecting5W-7W, 230V integral type LED Lamp suitable for B-22/E-27 base. |
| 25 | Supplying & erectingready to use RetrofitT8 LED 18/20 tube lightwith polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8/T12 LED luminaire by disconnecting starter & ballast if necessary. |
| 26 | Supplying and erecting ISI mark modular type bell indicator, duly erected on provided plate and box with wiring connections complete. |
| 27 | Supplying and erecting ding dong/electronic musical type call bell with heavy duty coilsuitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size |
| 28 | Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original. |
| 29 | Supplying and erecting 12 V/180Ahtubular battery with battery terminal wire, duly charged complete with 36 months warranty complete |
| 30 | Supplying and erecting triple pole metal clad rewireable fuse switch 415V, 200A on angle iron /GI frame as per specification no. SW-SWR / MTP. |
| 31 | Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB |
| 32 | Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
| 33 | Supplying, erecting & marking DPMCB 40A to 63A, C- series (for motor/power) in provided distribution boardas per specification no. SW-SWR/MCB |
| 34 | Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB |
| 35 | Supplyinganderectingtriplepole and neutral distribution board (TPNDB) surface/ flushmounted suitable for SPMCB of 12 wayson iron / GI frame (horizontal busbar type)as per specification no. SW-SWR/MCBDB |
| 36 | Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/ 100/ 300 mA sensitivity and having capacity of 40A complete as per specification no. SW-CCB/RCCB |
| 37 | Supplying and erecting iron,sheet metal work consisting of CRCA sheets,varioussectionsofiron,plates,chequered plates,rods,bars,MS pipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority. |
| 38 | Supplying and erecting bus bar chamber triple pole with neutral with four copper bars, 500V, 100A complete as per specification no. CP-BB |
| 39 | Supplying, erecting & terminating XPLEarmoured cable 4 core16sq. mm. aluminium conductor withcontinuous 5.48 sq. mm. (12 SWG) G.I. earth wire completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL |
| 40 | Supplying, erecting & terminatingXLPE armoured cable 3½ core50 sq. mm. aluminium conductor withcontinuous5.48 sq. mm. (12 SWG) G.I. earth wire completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL |
| 41 | Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactur- ed from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware in approved manner. |
| 42 | Providing earthing with galvanized iron earth plate size 60x60x0.6 cm complete with all materials, testing &recording the resultsas per specification no. EA-EP |
| 43 | Supplying and erectingaluminium strip of required sizes used for earthing on wall and/or any other purpose with necessaryaluminiumclampsfixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP. |
| 44 | Supplying and erecting LED square/circular 16 to 20 W down lighter having pressure die-cast aluminium housing,opal translucent cover,mounting arrange ment with board for surface type or spring loaded mounting clips for flush type complete. |
| 45 | Supplying and erecting rectangular shaped CRCA /die-cast aluminium powder coatedhousing LED panel (slim edge-lit) 300x1200mmof suitable for 36 to 40 W with provision for plane front frame with translucent cover fixed to the housing complete. |
| 46 | Providing and erecting bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 R.P.M. Oscillating type, plastic or metal bladeschromeplatedguardwithregulatorandmoisture proof treatment to winding and with ‘E’ class insulation. |
| 47 | Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF |
| 48 | Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner. |
| 49 | Supplying evaporative air cooler (desert cooler) with galvanised steel body 230/250 Volts, 50 cycles, normal cooling capacity of 60 to 70 cu.m per minute with 15" exhaust fan, minimum 68 litre water capacity tank complete. specification no. AP-WCR/DAC |
| 50 | Supplying, erecting, testing and commissioning self contained water cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 liters/hr and storage capacity 150 liters with partially stainless steel body complete. specification no. AP-WCR/WC |
| 51 | Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water 7 to 8 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply. |
| 52 | Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR Capacity havingISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condenser at position. specification no. APAC/ SAC |
| 53 | Supplying and erecting Centrifugal water pump (Monoblock), 230V, Single phase 50 cycles A.C. supply of 0.375 KW/0.5 HP with discharge 0.5/1.3 Litres per second (LPS) for head of 6/18 m& 25 mm suction/ 25 mm delivery pipeon provided C.C. foundation as per specification no. WP-CGP |
| 54 | Supplying, installing, testing and commissioning of 800 VA to 900 VA Digital pure sine wave inverter based on Insulated Gate Bipolar Transistor (IGBT) technology single phase 230V,50 Hz completeas per specification no.AP-INV (Without batteries) |
| 55 | Supplying, installing, testing and commissioning of 1400 VA to 1600 VA Digital pure sine waveinverter based on Insulated Gate Bipolar Transistor (IGBT) technology single phase 230V,50 Hz completeas per specification no.AP-INV (Without batteries) |
| 56 | Supplying&erectingsoftdrawncopperpipesuitablefor refrigeration system having 22 SWG thickness and inner dia/size 22 mm complete. |
| 57 | Supplying and erecting ISI mark GI pipe 20 mm dia. ‘B’class at position with accessories complete. Specification no. CW- PLB/GP. |
| 58 | Supplying, installing, testing and commissioning of FPC solar waterheatingsystemwithoutheat exchangertype of 300 LPD capacity complete. Specification no. ESD-SHWS-FPC |
| 59 | Supplying and erecting 20/25 mm (ID/OD) polyethylene composite pipe duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement for solar water heater system complete. Specification no. (ESD-HWP/PCP) |
| 60 | Supplying and erecting street light Wall bracket made from 25 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB |
| 61 | Supplying and erecting Street light bracket for erection of Single fitting made from 40 mm. dia ‘B’ class G.I. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FG-KT/BPC |
| 62 | Supplying anderectingLED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF >0.95 classIP 65andabovehousingofpressurediecast aluminium alloy and heat sink extruded aluminium complete per specification No . FG-ODF/FLS2. |
| 63 | Supplying anderectingLED street light fitting 100W, including lamp, with PF >0.95 class IP65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2. |
| 64 | Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 65 | Supplying and erectingsteeltubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75 m) length respect ively and total 8 m long with pole cap, base plate in provided fundation.(weight 101 kg)as per specifica tion no. OH-PL/STP |
| 66 | Supplying & erecting FRP box of size 250 x 200 x 100 mm, 2.7 mm thick complete on pole/wallas per specification no. CB-SB |
| 67 | Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
| 68 | Supplying, erecting & terminating XLPE armoured cable 2 core 6sq. mm. aluminium conductor withcontinuous5.48 sq. mm. (12 SWG) G.I. earth wire completeerected with glands & lugs, on wall/ trusses/pole or laid in rovided trench/ pipeas per specification no. CB-LT/AL |
| 69 | Supplying and erecting iron,sheet metal work consisting of CRCA sheets,various sections of iron, plates, chequeredplates,rods,bars,MS pipes,etc.forpanel board or any other purpose with bending cutting,drilling and welding completeerectedatthepositionwith necessarymaterialsdulypainted with one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority. |
| 70 | Supplying & erecting G.I.pipe‘A’class 25mm dia. erectedfor enclosingXLPEarmouredcable on wall/poleas per specification no. CB-CE |
| 71 | Making trench of suitable width and depth in hardmurum/ tar roadfor laying provided LT cable up to and including16 sq.mm complete as per specification no. CW-EXN-CTR |
| 72 | Making cement concrete foundation including excavation(60x60x150) cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45x45x45)cm/45 cm dia.x45 cm height plinth duly plastered,with necessary curing and finishing complete.(above 6m to 9 m poles) |
| 73 | Providingpipetype earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rodcomplete with all materials as per specification no. EA-EP |
| 74 | Add GST 12% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
