Repair Of Wr Subdivision Office Building Birpur Repair Of Office Building Birpur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Jun 2021
0 days left
EMD
7000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Birpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Of Wr Subdivision Office Building Birpur Repair Of Office Building Birpur
BOQ
| Name of Work: Repair estimate of Subdivision office building birpur | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Name of Material | |||
| 2 | 1.01 | Dismentling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to dumping ground within 50 m lead or as per directed Engineer-in-charge. | 263.265 | sqm | |
| 3 | 1.02 | Demolishing cement concrete manually /by mechanical means including disposal of material within 50 m lead or as per directed Engineer-in-charge | 6.438 | cum | |
| 4 | 1.03 | Excavation in all kind of soft/loose/hard/dense soils, moorum & moorum mixed with boulders and mud including dressing, placing the excavated soil neatly in specified dump area or disposing off the same as directed, including cost of site clearance, all materials, machinery, labour and dressing etc. Complete.lead and lift as per directed Engineer-in-charge | 11.133 | cum | |
| 5 | 1.04 | Cement concrete flooring 1:2:4 (1 cemenr: 2 sand : 4 graded stone aggregate)finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of step etc complete.(Atea of panel not to exceed 2.0 sqm)\n40 mm thick and 20 mm nomonal size aggeregate.lead and lift as per directed Engineer-in-charge | 10.263 | cum | |
| 6 | 1.05 | Providing and laying M-10 grade Mass Concrete design mix using 40 mm graded aggregates, clean, hard including cost of all materials, machinery, labour, formwork, centring, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing, packing joints of shuttering etc. Complete lead and lift as per directed Engineer-in-charge | 6.3045 | cum | |
| 7 | 1.06 | Providing and laying vitrified floor tiles in different sizes with water absorption less then 0.08% and conforming to IS 15622 of approved making in all coloures and shade in skirting riser of steps over 12 mm thick bed of cement mortar 1:3 including grouting the joint with white cement and matching pigments etc complete \nSize of Tiles 600x600x9-10 mm lead and lift as per directed Engineer-in-charge | 47.58 | sqm | |
| 8 | 1.07 | Providing 12 mm thick cement plaster of mix 1:4 (1Cement : 4 Sand) lead and lift as per directed Engineer-in-charge | 263.265 | sqm | |
| 9 | 1.08 | Providing fixing glazed shutters for doors ,windows and clerestory window ventilators using 4 mm thick float glass panels including IS marked M.S. pressed butt hinges bright finished of required size with necessary screws .\n1. Second class teak wood 35 mm thick lead and lift as per directed Engineer-in-charge\n | 26.565 | sqm | |
| 10 | 1.09 | Distempering with oil bound washable distemper of approved brand manufacturer to give an even shade including water thinnable priming coat (one or more coat) with cement plaster.lead and lift as per directed Engineer-in-charge | 315.465 | sqm | |
| 11 | 1.1 | Painting with synthetic enamel paint of approved brand of manufacturer of required colour to give an even shade:\n (two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacturer.work done as directed Engineer-in-charge\n | 26.565 | sqm | |
| 12 | 1.11 | Providing and fixing water closet squatting Pan (Indian Type WC Pan) with 100 mm sand Cast iron P or S trap UPVC or S Trap 10 L low level white PVC Flushins system including flush pipe with manually controlled device ( Handle Lever ) Conforming to IS 7231 with all fitting and Fixtures Complete including cutting and Making good the walls and floors wherever required \nwhite Vitreous China Orissa pattern WC pan of size 585X 480 mm with flush pipe and integrated types foot rest.lead and lift as per directed Engineer-in-charge | 1 | No | |
| 13 | 1.12 | Providing and fixing wash basin with CI Bracket 15 mm CP Brass pillar Type 32 mm CP brass waste of standard pattern including painting of fitting and bracket cutting and making good the walls wherever required.\nWhite vitreous china flat back wah basin size 450X 400 mm with single 15 mm CP Brass pilar Tap.lead and lift as per directed Engineer-in-charge | 1 | No | |
| 14 | 1.13 | Structural steel work reveted bolted or welded in built up section trusses and framed work including cutting hoisting , fixing in position and applying priming coat of approved steel primer all complete.lead and lift as per directed Engineer-in-charge | 260 | kg | |
| 15 | 1.14 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-inCharge. (cost of post painting earth work & C.C. to be paid separately) lead and lift as per directed Engineer-in-charge | 100 | sqm | |
| 16 | 1.15 | Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) lead and lift as per directed Engineer-in-charge | 240 | Kg |
AI Tender Summary
Tender Timeline
May 21, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 05, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 07, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender