Supplying And Erecting Electric Cremation Furnace With All Allied Equipment At Sy No 17 Mandwa Road Covid Cremation Site For M.C. Ambajogai , Electrically Heated Cremation Furnace With Micro Process Pid Type Plc Base Fully Automatic Controling Systems, At Ambajogai-Maharashtra

Supplying And Erecting Electric Cremation Furnace With All Allied Equipment At Sy No 17 Mandwa Road Covid Cremation Site For M.C. Ambajogai , Electrically Heated Cremation Furnace With Micro Process Pid Type Plc Base Fully Automatic Controling Systems Type Programmer Control Panel Board ( Including Armad Cable From Transfarmer To Pannel As Per Requirment ) Technical Specification ( A ) Useful Dimension :: Hight:: 1300Mm. Width:: 1500 Mm. Length :: 2700 Mm. ( B ) Overall Dimension :: Height :: 2600 Mm Width:: 1700 Mm Length :: 3700 Mm ( B ) Electric Supply:: Ac 3 Ph. 50 Hz 440 Valt. ( C ) Nominal Power Rating :: 100 K.W. ( D ) Max. Working Temp. :: 950 C ( As Per Market Rate ) , Wet Scrubber S.S. 304 With Motor , 5 H.P. Id Fan Complate Fittings Specification Fabricated From Ss 304 Cylindrical Vetical Self-Support Type Erection Of Scrubber. With Water Sprinklers Inside And Fixed Blade Cyclone Creator Inside For Mixing Of Dust. Flue Gases With Water 3 Horsepower – 1400 Rpm Motor With Ss 304 Suctin Blower Installation After The Wet Scrubber For Suction Of Flue Gases From Furnace To Wet Scrubber And Sending Scrubbed Gases Into The Chimney. The Ducting Between Furnace – Wet Scrubber – Suction Blower, Of 12`` Diameter. Separate Ss 304 Cylindrical Water Tank With Water Re-Circulation Motor Under Scrubber Of Approx. 300 Litters Capacity For Rotation Of Water. Entire Water Connection Made Out Of Gi Pipes. Appropriate Outlt From The Water Tank To Drain The Scrubbed Water. , Chimney 30.5 Miters ( 100 Ft ) Complete Specification Chimney For Exhaust 30.5 Meter / 100 Feet Height Ms Fabricated Self-Support Chimney Approximate Bottom Dia 900 Mm & Top Dia 300 Mm. The Bottom / Base Cone Part Of 10 Mm Thickness. 2Nd And 3Rd Part Of Chimney Pipe Of 8Mm Thickness 4Th, 5Th And 6Th Part Of Chimney Pipe Of 6 Mm Thickness Ligtening Arrestor At Top And Earthening / Gi Riiling Strip From Top To Bottom With Proper Earthening. Aviation Light At The Top Of The Chimney With Proper Electrical Wiring And Supply. Chimney Shall Be Treated With One Coat Of Anti-Rust Primer And Two Coats Of Heat Resistant Aluminium Paints. ( As Per Market Rate )

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	26-05-2021	Corrigendum_1	Date	27-05-2021

Refer document

Refer document

Refer document