Supplying And Fixing Modular Furniture Including Tables , Chairs , Work Stations , Storage Cabinets And Compactors In Main Building Of Scert , Defence Colony , New Delhi During 2021-22 . , SCERT DEFENCE COLONY-Delhi

Supplying And Fixing Modular Furniture Including Tables , Chairs , Work Stations , Storage Cabinets And Compactors In Main Building Of Scert , Defence Colony , New Delhi During 2021-22 . , Modular Table-Providing & Supplying Free Standing Table With 25Mm Thick Prelaminated Partical Board Table Top Supported By Prelaminated Gable Ends & Modesty Panel . 25Mm Thick Prelaminated Partical Board Finish Gable Ends Shall Be Kd-Fitted To The Top And Shall Be With 2 Nos . Of Glide Screws At Bottom For Levelling Of The Workstation . All Edges Shall Be Provided With Hot Pressed 2Mm Thick Pvc Edging Using Special Hot Melt Glue At High Temperature . One No . Of 18Mm Thick Prelaminated Modesty Panel Shall Be Kd-Fitted To The Top With Clearence Of 100-150Mm From Finished Floor Level Is Included In The Workstation . The Size Of The Workstation Is Specified Below-Main Table Size-1500Mml X 750Mmd X 730Mmh & Return Table-900Mml X 450Mmd X 730Mmh ( One Credenza-750Mm L Underneath Made Of 18Mm Thick Prelam Particle Board With Openable Shutter ) . Make:- Godrej , ( Hni ) B . P Ergo , Herman Millar , Vitra . , Modular Workstation With Partition-Providing & Supplying Workstations With Of 50Mm Thick Partition Panel Of 1200Mm Height With A Provision To Carry Wire Through The Frame At Below The Top And At Skirting Level . The Size Of The Workstation For Each Individual User Shall Be As Specified Below . Tile Finish-Lower Module Prelaminate And Upper Module-Fabric . One Pinup ( Magnetic/Soft ) & One Glass Marker With Glass Separator Panel Considered For Each User . Partition Specification-The System Should Have Partitions Of Height 1200Mm . The Framework For The Partition Comprise Of Tile Based Partition Of 50Mm Thick Of Height 1200Mm With Skirting Height Of 100Mm Raceway Made Of Crca Sheet Of 0 . 8-1Mm Thick Including M10x 50Mm Leveler And Have Clear Space Of 30-35Mm Between Two Tiles For Wire Management Facilities . The Basic Framework Is Made Up In Combination Of Almunium & Crca Steel With Thickness Of 1 . 2Mm . Vertical & Horizontal Rail Is Made Up Of 1 . 2Mm Thick Of Aluminium Extrusions . The Thickness Of The Powder Coating For All The Aluminium/Crca Steel Parts Shall Be Minimum 45Microns . Lower Module Tile Finish Shall Be Prelaminate And Upper Module Shall Be Fabric . Laminated Tile- Consists Of 9Mm Thick Prelam Particle Board . Fabric Tile: Consists Of 3 . 5Mm Thick Medium Density Fibre Board With Fabric Upholstered Of Approved Shade Pasted . Make:- Godrej , ( Hni ) B . P Ergo , Herman Millar , Vitra . Worktop Specification-Worktop Shall Be Made Of 25 Mm Thick Prelaminated Partical Board Of Approved Shade . All The Edge Of Worksurface Shall Be Provided With Machine Pressed 2Mm Thick Polyvinyl Chloride ( Pvc ) Lipping Glued With Hotmelt Glue . The Worksurface Are Mounted On The Worksurface Brackets Of 2-2 . 5 Mm Thick Crca Steel . All The Brackets Are Powder Coated To Minimum Thickness Of 45 Microns . Make:- Godrej , ( Hni ) B . P Ergo , Herman Millar , Vitra . Staff Wortkstation ( Straight ) Seating 2 Persons , Each Table Size-1200Mm X 750Mm With End Partition On Both Side . , Staff Wortkstation ( Straight ) Seating 4 Persons , Each Table Size-1200Mm X 750Mm With End Partition On Both Side . , Staff Wortkstation ( Straight Back To Back ) Seating 4 Persons , Each Table Size-1200Mm X 750Mm With End Partition On Both Side . , Staff Wortkstation ( Straight Back To Back ) Seating 6 Persons , Each Table Size-1200Mm X 750Mm With End Partition On Both Side . , Staff Wortkstation ( Straight ) Seating 2 Persons , Each Table Size-1200Mm X 600Mm With End Glass Partition On Both Side And No Front Partition , With Metal Modesty Panel In Front . , AccessoriesProviding & Supplying Three Drawer Steel Pedestal ( 2 Box + 1 File ) With Levelers/Castor . The Pedestal Drawers Unit Shall Have Outer Dimensions Of 640-680 Mm Height X 390-400 Mm Width X 450 Mm Depth . The Pedestals Shall Have Central Locking Mechanism With Flush Fitted Pvc Handles . The Drawers And Filing Box Shall Be Mounted On Roller Slides . . Make:- Godrej , ( Hni ) B . P Ergo , Herman Millar , Vitra . , Providing & Supplying Keyboard Pull Out Tray Made Of 0 . 8 Mm Thick Crca Steel Duly Powder Coated , Of Minimum Thickness 45Micron , With Metallic Roller Slides ( Telscopic Channels ) On Both Sides And Shall Be Fixed To The Bottom Of Worktop Surface With The Help Of Screws . . Make:- Godrej , ( Hni ) B . P Ergo , Herman Millar , Vitra . , Providing & Supplying Cpu Trolley Made Of Heavy Plastic Of Black Shade , With 35Mm Dia Casters To Provide Mobility . The Width Of Cpu Should Be Adjustable . . Make:- Godrej , ( Hni ) B . P Ergo , Herman Millar , Vitra . , Cabinet Storage Unit-Providing & Supplying Hinged Door Free Standing Cabinet Units Resting On Floor Having Door , Top , Sides , Back , & Shelves In Crca Powder Coated Steel . The Body And Shelves Of The Cabinets Shall Be Made Of 0 . 8-1Mm Crca Steel . The Top Of The Cabinets Shall Be Made Of 1 . 2Mm Thick Crca Steel And The Skirting Shall Be Made Of 1-1 . 2Mm Crca Steel . The Cabinet Shall Be Provided With Lever Cam Locks . The Handles Shall Be Pvc Moulded And Shall Be Flush Fitted/In D-Shape Metal Finish . The Cabinets Shall Be Provided With 4 Nos . M10 Levelers For Height Adjustment Upto 10-15Mm . The Shutters Made Of Crca Steel Powder Coating Shall Have Self-Closing Hinges . Make:- Godrej , ( Hni ) B . P Ergo , Herman Millar , Vitra . 900Mm ( L ) X 450Mm ( D ) X 1200Mm ( H ) - , 750Mm ( L ) X 450Mm ( D ) X 1200Mm ( H ) - , 600Mm ( L ) X 450Mm ( D ) X 1200Mm ( H ) - , 600Mm ( L ) X 450Mm ( D ) X 730Mm ( H ) - , Conference Table-Providing & Supplying Table In Boat Shape Made Of 25Mm Thick Prelaminated Partical Board Supported By Crca Steel/Almunium Understructure Comprise Of Powder Coated Elliptical Legs Interconnected By Crca Steel Powder Coated Cable Beams . All The Edge Of Worksurface Shall Be Provided With Machine Pressed 2Mm Thick Polyvinyl Chloride ( Pvc ) Lipping Glued With Hotmelt Glue . Access Flap , Verticle Duct & Cable Beams Shall Be Provided For Wire Management Facilities . Size-4800Mml X 1200Mmw X 730Mmh . Make:- Godrej , ( Hni ) B . P Ergo , Herman Millar , Vitra . , Conference Room Back Table-Providing & Supplying Free Standing Table With 25Mm Thick Prelaminated Partical Board Table Top Supported By Prelaminated Gable Ends & Modesty Panel . 25Mm Thick Prelaminated Partical Board Finish Gable Ends Shall Be Kd-Fitted To The Top And Shall Be With 2 Nos . Of Glide Screws At Bottom For Levelling Of The Workstation . All Edges Shall Be Provided With Hot Pressed 1 . 2-2Mm Thick Pvc Edging Using Special Hot Melt Glue At High Temperature . One No . Of 18Mm Thick Prelaminated Modesty Panel Shall Be Kd-Fitted To The Top With Clearence Of 100-150Mm From Finished Floor Level Is Included In The Workstation . Size-1350Mm ( L ) X 450Mm ( D ) X 730Mm ( H ) . . Make:- Godrej , ( Hni ) B . P Ergo , Herman Millar , Vitra . , Modular Loose Partition-Providing & Supplying Loose Modular Partition With Of 50Mm Thick Partition Panel Of 1200Mm Height With A Provision To Carry Wire Through The Frame At Below The Top And At Skirting With Skirting Height Of 100Mm Raceway Made Of Crca Sheet Of 0 . 8-1Mm Thick Including M10x 50Mm Leveler And Have 30-35Mm Minimum Clear Space Between Two Tiles For Wire Management Facilities . The Basic Framework Is Made Up In Combination Of Crca Steel & Almunium With Thickness Of 1 . 2Mm . Vertical & Horizontal Rail Is Made Up Of 1 . 2Mm Thick Of Aluminium Extrusions . The Thickness Of The Powder Coating For All The Aluminium/Crca Steel Parts Shall Be Minimum 45Microns . Lower Module Tile Finish Shall Be Prelaminate And Upper Module Shall Be Fabric . Laminated Tile- Consists Of 9Mm Thick Prelam Particle Board . Fabric Tile: Consists Of 3 . 5Mm Thick Medium Density Fibre Board With Fabric .

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	31-May-2021	Corrigendum for Date	Date	05-06-2021

Refer document

Refer document

INR 95.99 Lakhs /-

Name of Work: Supplying and Fixing Modular Furniture including tables, chairs, work stations, storage cabinets and compactors in main building of SCERT, Defence Colony, New Delhi during 2021-22.
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1.01	MODULAR TABLE-\nProviding & Supplying Free Standing Table with 25mm thick prelaminated partical board table top supported by Prelaminated Gable Ends & Modesty Panel.25mm thick Prelaminated partical board finish Gable ends shall be KD-Fitted to the Top and shall be with 2 Nos. of glide screws at bottom for levelling of the workstation.All edges shall be provided with hot pressed 2mm thick PVC edging using special hot melt glue at high temperature.One No. of 18mm thick Prelaminated Modesty panel shall be KD-Fitted to the Top with clearence of 100-150mm from Finished Floor Level is included in the workstation.The size of the workstation is specified below-\nMain Table Size-1500mmL x 750mmD x 730mmH & Return Table-900mmL x 450mmD x 730mmH (One Credenza-750mm L underneath made of 18mm thick Prelam Particle Board with Openable Shutter). Make:- Godrej, (HNI) B.P Ergo , Herman Millar, Vitra.		6	NOS.
2	1.02	MODULAR WORKSTATION WITH PARTITION-\nProviding & Supplying Workstations with of 50mm thick partition panel of 1200mm Height with a provision to carry wire through the frame at below the Top and at skirting Level.The size of the workstation for each individual user shall be as specified below.Tile Finish-Lower Module PreLaminate and Upper Module-Fabric.One Pinup (Magnetic/Soft) & One Glass Marker With Glass Separator Panel Considered for each user.\nPARTITION SPECIFICATION-\nThe System should have partitions of height 1200mm.The framework for the partition comprise of Tile based partition of 50mm thick of height 1200mm with skirting height of 100mm Raceway Made of CRCA sheet of 0.8-1mm thick including M10x 50mm leveler and have clear space of 30-35mm between two tiles for wire management facilities. The basic framework is made up in combination of Almunium & CRCA Steel with thickness of 1.2mm. Vertical & Horizontal rail is made up of 1.2mm thick of aluminium extrusions.The thickness of the powder coating for all the aluminium/CRCA steel parts shall be minimum 45microns. Lower Module Tile Finish shall be PreLaminate and upper Module shall be Fabric.Laminated Tile- consists of 9mm thick prelam particle board.Fabric Tile: Consists of 3.5mm thick medium density fibre board with fabric upholstered of approved shade pasted.Make:- Godrej,(HNI) B.P Ergo , Herman Millar, Vitra.\nWORKTOP SPECIFICATION-\nWorktop shall be made of 25 mm thick prelaminated partical board of approved shade.All the edge of worksurface shall be provided with machine pressed 2mm thick Polyvinyl Chloride (PVC) lipping glued with hotmelt glue.The worksurface are mounted on the worksurface brackets of 2-2.5 mm thick CRCA Steel.All the brackets are powder coated to minimum thickness of 45 microns. Make:- Godrej,(HNI) B.P Ergo, Herman Millar, Vitra.\nSTAFF WORTKSTATION (STRAIGHT)\nSeating 2 Persons,Each Table Size-1200mm x 750mm with End Partition on Both Side.		3	NOS.
3	1.03	STAFF WORTKSTATION (STRAIGHT)\nSeating 4 Persons,Each Table Size-1200mm x 750mm with End Partition on Both Side.		3	NOS.
4	1.04	STAFF WORTKSTATION (STRAIGHT BACK TO BACK)\nSeating 4 Persons,Each Table Size-1200mm x 750mm with End Partition on Both Side.		3	NOS.
5	1.05	STAFF WORTKSTATION (STRAIGHT BACK TO BACK)\nSeating 6 Persons,Each Table Size-1200mm x 750mm with End Partition on Both Side.		6	NOS.
6	1.06	STAFF WORTKSTATION (STRAIGHT)\nSeating 2 Persons,Each Table Size-1200mm x 600mm with End Glass Partition on Both Side and No Front Partition, with Metal Modesty Panel in Front.		2	NOS.
7	1.07	ACCESSORIES\nProviding & Supplying Three Drawer Steel Pedestal (2 Box + 1 File) with levelers/castor. The pedestal drawers unit shall have outer Dimensions of 640-680 mm Height x 390-400 mm Width x 450 mm Depth.The pedestals shall have central locking mechanism with flush fitted PVC handles. The drawers and filing box shall be mounted on roller slides. .Make:- Godrej,(HNI) B.P Ergo , Herman Millar, Vitra.		76	NOS.
8	1.08	Providing & Supplying Keyboard pull out tray made of 0.8 mm thick CRCA steel duly powder coated, of minimum thickness 45micron, with metallic roller slides(Telscopic channels) on both sides and shall be fixed to the bottom of worktop surface with the help of screws. .Make:- Godrej,(HNI) B.P Ergo , Herman Millar, Vitra.		76	NOS.
9	1.09	Providing & Supplying CPU Trolley made of heavy Plastic of Black shade,with 35mm dia casters to provide mobility.The width of CPU should be adjustable. .Make:- Godrej,(HNI) B.P Ergo , Herman Millar, Vitra.		76	NOS.
10	1.1	CABINET STORAGE UNIT-\nProviding & Supplying Hinged Door Free standing cabinet units resting on floor having door, top, sides, back, & shelves in CRCA powder coated steel. The body and Shelves of the cabinets shall be made of 0.8-1mm CRCA steel.The top of the cabinets shall be made of 1.2mm thick CRCA steel and the skirting shall be made of 1-1.2mm CRCA steel. The cabinet shall be provided with Lever CAM Locks.The handles shall be PVC Moulded and shall be flush fitted/In D-Shape Metal Finish.The cabinets shall be provided with 4 Nos. M10 levelers for height adjustment upto 10-15mm.The shutters made of CRCA Steel powder Coating shall have self-closing hinges. Make:- Godrej,(HNI) B.P Ergo , Herman Millar, Vitra.\n900mm(L) x 450mm(D) x 1200mm(H)-		6	NOS.
11	1.11	750mm(L) x 450mm(D) x 1200mm(H)-		48	NO.
12	1.12	600mm(L) x 450mm(D) x 1200mm(H)-		2	NOS.
13	1.13	600mm(L) x 450mm(D) x 730mm(H)-		2	NOS.
14	1.14	CONFERENCE TABLE-\nProviding & Supplying Table in Boat Shape made of 25mm thick Prelaminated partical board supported by CRCA Steel/Almunium understructure comprise of Powder Coated Elliptical Legs interconnected by CRCA Steel Powder Coated Cable Beams.All the edge of worksurface shall be provided with machine pressed 2mm thick Polyvinyl Chloride (PVC) lipping glued with hotmelt glue.Access Flap,Verticle Duct & Cable Beams shall be provided for wire management facilities.Size-4800mmL x 1200mmW x 730mmH. Make:- Godrej,(HNI) B.P Ergo , Herman Millar, Vitra.		1	NO.
15	1.15	CONFERENCE ROOM BACK TABLE-\nProviding & Supplying Free Standing Table with 25mm thick prelaminated partical board table top supported by Prelaminated Gable Ends & Modesty Panel.25mm thick Prelaminated partical board finish Gable ends shall be KD-Fitted to the Top and shall be with 2 Nos. of glide screws at bottom for levelling of the workstation.All edges shall be provided with hot pressed 1.2-2mm thick PVC edging using special hot melt glue at high temperature.One No. of 18mm thick Prelaminated Modesty panel shall be KD-Fitted to the Top with clearence of 100-150mm from Finished Floor Level is included in the workstation.Size-1350mm(L) x 450mm(D) x 730mm(H). .Make:- Godrej,(HNI) B.P Ergo , Herman Millar, Vitra.		6	NOS.
16	1.16	MODULAR LOOSE PARTITION-\nProviding & Supplying Loose Modular Partition with of 50mm thick partition panel of 1200mm Height with a provision to carry wire through the frame at below the Top and at skirting with skirting height of 100mm Raceway Made of CRCA sheet of 0.8-1mm thick including M10x 50mm leveler and have 30-35mm minimum clear space between two tiles for wire management facilities. The basic framework is made up in combination of CRCA Steel & Almunium with thickness of 1.2mm. Vertical & Horizontal rail is made up of 1.2mm thick of aluminium extrusions.The thickness of the powder coating for all the aluminium/CRCA steel parts shall be minimum 45microns. Lower Module Tile Finish shall be PreLaminate and upper Module shall be Fabric.Laminated Tile- consists of 9mm thick prelam particle board.Fabric Tile: Consists of 3.5mm thick medium density fibre board with fabric. .Make:- Godrej,(HNI) B.P Ergo , Herman Millar, Vitra.		198	SFT.
17	1.17	OVER HEAD STORAGE UNIT-\nProviding & Supplying hinged door Over Head Storage units of Size-600Lx400Dx750H, mounted over Wall having door, top & shelves in 18mm prelam particle board respectively. The back panel is made up of 9mm thick prelam particle board fitted with standard KD fitting for joining the side panel to top and bottom panel, L plate is fixed to top panel from inner side for engaging the lever tower bolt on left hand door panel. All the exposed edges is concealed with 2mm PVC lipping hot pressed.Mulipurpose locks is used for locking doors. Each Unit shall have One Shelves making Two Compartments. Shelves shall be fixed .The shutter shall have self-closing hinges openable up to 95-120 degree.The Unit shall have D-Type Metal finished handles on both doors fitted with pan head screws. .Make:- Godrej,(HNI) B.P Ergo , Herman Millar, Vitra.		40	NOS.
18	1.18	CHAIR-\nProviding and Placing of High Back Chair With Head Rest & PU Moulded Cushion on Seat with Outer Cover and Seat Foam Density is 45 kg/m3, Polyester Mesh in Black Colour with 1D Adjustable Arms with Polyurethane Arm Pads,Polyproplyne Integrated Height Adjustable Lumber Support, Adjustable Back Tilt Tension with 15-20 degree tilt angle,Pneumatic Seat Height Adjustment with stroke of 95mm,Five Star Chrome Base ,Synchro Tilt Mechanism,Single Poing Locking Mechanism with Gas Lift.Overall Dimension-1070mmH x 640mmW x 665mmD. .Make:- Godrej,(HNI) B.P Ergo , Herman Millar, Vitra.		7	NOS.
19	1.19	Providing and Placing of Mid Back Chair With PU Moulded Cushion on Seat with Outer Cover and Seat Foam Density is 45 kg/m3, Polyester Mesh in Black Colour with 1D Adjustable Arms with Polyurethane Arm Pads,Polyproplyne Integrated Height Adjustable Lumber Support, Adjustable Back Tilt Tension with 15-20 degree tilt angle,Pneumatic Seat Height Adjustment with stroke of 95mm,Five Star Chrome Base ,Synchro Tilt Mechanism,Single Poing Locking Mechanism with Gas Lift.Overall Dimension-985mmH x 640mmW x 665mmD. .Make:- Godrej,(HNI) B.P Ergo , Herman Millar, Vitra.		104	NOS.
20	1.2	Providing and Placing Visitor Chairs Consisting of Black Polyester Mesh Back, Black Fabric of approved shade in Seat Finish and Seat Foam Density is 45 kg/m3,Fixed Armrest with Polyprolyne Arm Pad, Fixed Cantilever Base in Black Black Powder Coating,with Castors Or Glides. .Make:- Godrej,(HNI) B.P Ergo , Herman Millar, Vitra.		12	NOS.
21	1.21	COMPACTOR STORAGE UNIT-\nSpecification : Providing & Supplying Compactor of approximately 915mm wide, 1980mm height (Ht), 457mm depth.The overall height of the standard module is 1980 mm from the bottom of the under carriage to the top of the module. These modules are fabricated in the factory with knock down construction covered from all the sides. The sheet used is CRCA conforming to IS:513 Grade D with thickness 0.8-1mm for the vertical back, side walls, top cover and horizontal shelves of bodies. Bodies are fixed/movable are bolted to undercarriage made up of 2-3mm thk HR Steel sheet which rolls onto channels/rail of 1.2-2mm thk HR steel & 25mm square bright bar which are embedded to the levelled ground. The sides/shelves shall be made from steel sheets conforming to relevant codes. The construction of the units shall be such that protection against dust by suitable overlapping of sheets and adequate pressing of joint. The allowable dimensional tolerance for the overall size of the body is 2mm. The bodies should be complete knock down type and UDL each shelf should be 40kg . No welding/metal working is allowed on site, Bodies are fixed/movable are bolted to undercarriage is allowed on site.(Rate Per Body/Unit).Make:- Godrej,(HNI) B.P Ergo, Herman Millar, Vitra.		56	EACH