Installation And Energisation Of Kulamanikunda-Ii Li Project
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 May 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KANTAPADA → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation And Energisation Of Kulamanikunda-Ii Li Project
BOQ
| Name of Work: INSTALLATION AND ENERGISATION OF Kulamanikunda II L.I.PROJECT IN KANTAPADA BLOCK OUT OF CUTTACK DISTRICT DISTRICT | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 2 | Earth work in hard soil for excavation of foundation including dressing and levlling the bed and depositing the soil within 50 mtr. initial lead and 1.5 mtr. initial lift as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001113 | 646.12 | Cum |
| 2 | 3 | Filling in foundation and plinth with sand watered and rammed including cost of sand as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001114 | 7.02 | cum. |
| 3 | 4 | Cement concrete (1:4:8) with 4 cm size h.g. metal as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001115 | 3.31 | cum. |
| 4 | 5 | Ist Class K.B.Brick (25cm x 12 cm x 8 cm ) having crushing strength not less than 75kg./cm2 with dimensional tolerance + 8% in cement mortar (1:6) in foundation and plinth. | BI01010001010000000000000515BI0100001116 | 9.7 | cum. |
| 5 | 6 | CC(1:2:4) in foundation and plinth | BI01010001010000000000000515BI0100001117 | 0.3 | cum. |
| 6 | 7 | Cement concrete (1:2:4) with 12mm size h.g chips for R.C.C. works including hoisting and laying. | BI01010001010000000000000515BI0100001119 | 4.58 | cum |
| 7 | 8 | Rigid smooth centering and shuttering for R.C.C. works including false work and dismentling them after casting including cost of materials complete in roof slab & Chajja. . | BI01010001010000000000000515BI0100001120 | 45.35 | Sqm. |
| 8 | 9 | Labour cost for cutting, bending and binding of M. S. rod placing in position including cost of M. S. rod.Qty. @ 0.9% of R. C. C. work or 1.40qtl @ 78 qtl / cum | BI01010001010000000000000515BI0100001121 | 3.81 | Qtl. |
| 9 | 10 | 12mm thick cement plaster (1:6) for brick masonary | BI01010001010000000000000515BI0100001123 | 115 | Sqm. |
| 10 | 11 | Cement Punning | BI01010001010000000000000515BI0100001113 | 13.68 | Sqm. |
| 11 | 12 | Labour charges for lettering the display board in black colour , yellow back ground painting including the cost of materials. | BI01010001010000000000000515BI0100001114 | 1 | No |
| 12 | 13 | Filling F & P with excavated materials including watering and ramming as directed by the Engineer-in-charge. | BI01010001010000000000000515BI0100001115 | 646.12 | Cum |
| 13 | 14 | Labour charges for laying and jointing of 160mm dia PVC Pipe including carriage from stacking yard to site. | BI01010001010000000000000515BI0100001116 | 761 | Mtr. |
| 14 | 15 | Provision for M. S. bolt for foundation 4 nos and MS hook for handling of FF | BI01010001010000000000000515BI0100001117 | 2.6 | Kg |
| 15 | 16 | Dismantling of Lime Concrete, cement concrete grade M-10 and below including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres Unit = cum | BI01010001010000000000000515BI0100001118 | 6.25 | cum. |
| 16 | 17 | Cost of laying and fitting of MS Tee and other PVC fitthing along the pipe line. | BI01010001010000000000000515BI0100001119 | 5 | No |
| 17 | 18 | Extra labour and materials required for fitting and fixing of 25mm dia GI pipe for 50mm dia CI Air release valve at the sutable location of PVC pipe inside the air realease chamber including cost of petty materials. | BI01010001010000000000000515BI0100001120 | 3 | No |
| 18 | 19 | Labour charges for lowering of S/S pump , fitting of delivery pipes , sluice valve, NR valve, Air Valve and riser Tee etc. including hire charges of T & P materials as required. | BI01010001010000000000000515BI0100001121 | 1 | No |
| 19 | 20 | 2.5 cm AS stone flooring with CC ( 1:2:4) | BI01010001010000000000000515BI0100001122 | 6.25 | Sqm. |
| 20 | 21 | Wall painting two coats with cement paint of approved shade on new work | BI01010001010000000000000515BI0100001114 | 68.22 | Sqm. |
| 21 | 22 | Provision of iron door and iron window each 1 no | BI01010001010000000000000515BI0100001116 | 2 | No |
| 22 | 23 | Painting 3 coats over iron work | BI01010001010000000000000515BI0100001117 | 6 | Sqm. |
| 23 | 24 | Cost of ventilator and sky light including fitting | BI01010001010000000000000515BI0100001118 | 2 | No |
| 24 | 25 | Ist Class K.B.Brick (25cm x 12 cm x 8 cm ) having crushing strength not less than 75kg./cm2 with dimensional tolerance + 8% in cement mortar (1:6) in superstructure. | BI01010001010000000000000515BI0100001120 | 6.995 | cum. |
| 25 | 26 | Electrical earthing with the help of 1½\" GI pipe 2 Nos including all labour and materials required such as GI wire , GI socket , Charcoal, Salt, small size nut and bolts and all other materials required including excavation of earth pit and fitting thereoff complete. | BI01010001010000000000000515BI0100001121 | 2 | No |
| 26 | 27 | 10 H.P.Monoblock Pump set ( BEE STAR Lebeled Energy efficient ) coupled with totally enclosed squirrel cage induction motor with delivery discharge 1700 LPM at 22 mtrs. Head with cable, cable clip, support clamp etc. suitable for operation at 415+6% ,-15% volt,3 phase ,50 Hz, AC power supply with ISI mark and guarantee .\nThe materials of construction as given below.\n(a) Motor casing.. stainless steel AISI 304\n(b) Impeller ... bronze \n(c) Pump shaft... stainless steel\n(d) Sand guard...... bronze.\n(e) Non-return valve... CIFG 200. | BI01010001010000000000000515BI0100001122 | 1 | No. |
| 27 | 28 | Automatic star-delta starter sheet steel enclosure suitable for operation of squirrel cage induction motors upto 15 HP having full load current of 16 Amp. At 415 V + 6% - 15% , 3 phase, 50 Hz,Ac supply with over load relay range 13.5 - 20 Amp and No Volt coil suitable for operation at voltage range of 350 - 440 V. The starter should provide depenmdable protection against overload and single phasing of reputed brand having wide dealership network for easy availoability of spares with ISI mark and guarantee. | BI01010001010000000000000515BI0100001123 | 1 | No. |
| 28 | 29 | Main Switch 63 Amp including fitting and fixing as per IS No.-4064(Part-I & II) with utilisation capacity category AC-22. | BI01010001010000000000000515BI0100001121 | 1 | No. |
| 29 | 30 | 3 ph. 4 wire 20 - 100 Amp. 3 x 230 Volt (P-N) current meter with ISI mark as approved by DISTCO,CESU with matching fibre glass with T.P Box(M.S) | BI01010001010000000000000515BI0100001122 | 1 | No. |
| 30 | 31 | Empty Panel Board | BI01010001010000000000000515BI0100001123 | 1 | No. |
| 31 | 32 | 4 KVAR Capacitor | BI01010001010000000000000515BI0100001113 | 1 | No. |
| 32 | 33 | 3 x 10 sqmm Trapoder cable XLPE (Cross link polyethylin ) including laying below the ground and filling the excavated materials including watering and ramming with ISI mark and guarantee. | BI01010001010000000000000515BI0100001114 | 30 | Mtr. |
| 33 | 34 | Motor Base plate made with MS channels | BI01010001010000000000000515BI0100001117 | 1 | No. |
| 34 | 35 | 100 mm dia GI socket | BI01010001010000000000000515BI0100001118 | 5 | Mtr. |
| 35 | 36 | 100mm dia nominal bore G.I.Pipe having wall thickness 4.5mm electrical resistance welded of medium class conforming to IS - 1239 (part-I/2004) with latest \nAmendments,screwed at both ends as per IS -554 socketed at one end and the other end protected with plastic threaded protector. The socket conforming to IS:1239 (Part-II/1992) with latest Amendments in random length of 4 to 7 mtrs. Each pipe should bear ISI Certification and manufacturers name/trademark , for fitting in Suction & Delivery Pipes. | BI01010001010000000000000515BI0100001121 | 30 | Mtr. |
| 36 | 37 | 100 mm dia C.I.Sluice valve | BI01010001010000000000000515BI0100001122 | 1 | Kg |
| 37 | 38 | 100 mm dia GI Bend | BI01010001010000000000000515BI0100001123 | 3 | No. |
| 38 | 39 | 100 mm dia GI Flange | BI01010001010000000000000515BI0100001121 | 10 | Mtr. |
| 39 | 40 | 100 mm dia MS clamp | BI01010001010000000000000515BI0100001122 | 1 | Pair |
| 40 | 41 | Cost of 2.5mm Sqx3 core submersible flat cable of IXI mark suitable for 10 HP pumpset | BI01010001010000000000000515BI0100001123 | 100 | No. |
| 41 | 42 | 160mm dia PVC pipe | BI01010001010000000000000515BI0100001113 | 762 | No. |
| 42 | 43 | 150mm dia GI flange | BI01010001010000000000000515BI0100001114 | 6 | No. |
| 43 | 44 | 160mm equal Tee | BI01010001010000000000000515BI0100001113 | 6 | No. |
| 44 | 45 | 160 mm dia PVC End cap | BI01010001010000000000000515BI0100001113 | 7 | No. |
| 45 | 46 | Solvent Cement | BI01010001010000000000000515BI0100001121 | 16.44 | Kg |
| 46 | 47 | 160x160x100 mm dia MS Tee with closing arrangement | BI01010001010000000000000515BI0100001122 | 5 | No. |
| 47 | 48 | 160mm dia PVC socket with flange | BI01010001010000000000000515BI0100001123 | 6 | No. |
| 48 | 49 | 160mm dia PVC coupler | BI01010001010000000000000515BI0100001113 | 6 | No. |
| 49 | 50 | 150mm dia butterfly valve | BI01010001010000000000000515BI0100001114 | 3 | No. |
| 50 | 51 | 200x100 mm T/W cap | BI01010001010000000000000515BI0100001114 | 1 | No. |
| 51 | 52 | Construction of 3 phase 11 KV line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PSC Pole with 55 Sqmm AAAC , 11 KV \"V\" Cross arm, with required No.of 11 KV T & C Disc. Insulators in tension point & 11 KV Pin insulators, Couping & Padding of Poles. Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point & double stay at end point with 18 mm G.I.H.T.Stay, concreting of Stay with Anchor plate, guarding at Road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. | BI01010001010000000000000515BI0100001113 | 0.05 | Km. |
| 52 | 53 | Construction and erection of 11 /0.4 KV , 25 KVA Double Pole mounted Substation Star rated confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm M.S.Channel, Transformer belting on 2.80 M long 50 X 50 X 5 mm M.S.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75 X 40 X 6 mm M.S.Channel and supported by 1.0 M long 50 X 50 X 5 mm M.S.Angle, with 3 No. 11 KV Lightening Arrestors & Distribution box for 25 KVA S/S, G.I.pipe earthing with 25X5mm G.I.Flats including cost of 25 KVA 11/0.4 K.V.Transformer , 35 Sqmm 3 1/2 Core PVC Cable - 40 mtr couping & padding of Poles, Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of RCC fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. | BI01010001010000000000000515BI0100001114 | 1 | No. |
| 53 | 54 | Consturction of 3 Phase L.T.line as per REC standard confirming to RE rule 1956 with 200Kg BM long PSC pole support in 0.40M span with 3x35mm² +1x25 mm ² LT x LPE AB cable with coil earthing device, LT dead end clam, Suspension clamp with I hook , stay accessories such as wire insulator , clamp etc. nut bolts, alonwith concreting of poles and stay as per direction of Engineer in Charge. | BI01010001010000000000000515BI0100001113 | 0.3 | Km. |
| 54 | 55 | 11 KV line DP | BI01010001010000000000000515BI0100001114 | 1 | No. |
AI Tender Summary
Tender Timeline
May 21, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMay 27, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 28, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender