Tailing Slime Classification Unit For 3000 Tpd
Tender Value
62.16 Lakhs
Estimated cost
Bid Submission
07 Jun 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1560
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
→ Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tailing Slime Classification Unit For 3000 Tpd 1. Tailing Slime Classification Unit For 3000 Tpd,
BOQ
| Sl No | Item Code | Item Name | Item Description | Unit | Quantity |
|---|---|---|---|---|---|
| 1 | 38075 | Tailing Slime Classification Unit for 3000 TPD | Specificaton for Spares for Thickeners & Agitators: Single stage Tailing Slime Classification Unit for 3000 TPD (304M3/hr) Plant with following Specifications A. Tega 15\" Hydro Cyclone classification Unit/Equivalent Cyclone Model : Tega 15\" Hydro Cyclone /Equivalent Unit Capacity : 77m3/hr Operating Pressure : 37-42kpa Number of Cyclone Required for operation : for 125 TPH (304m3/hr)/3000TPD- 4Nos operating + 01 No standby. System offered : 5 No\s way Radial fitted with 5 No\s of Tega 15\" Hydro Cyclone/Equivalent Description of 15\" Hydro Cyclone Unit: 5 way Radial arrangement fitted with 5 No\s( 4Nos operating + 01 No standby)of Tega 15\", Hydro Cyclone is made of Steel Casing with rubber and Cryston liner/Equivalent. Each cyclone consists of Vortex finder body, V F insert, Cone Section, extension, Spigot, Spray reduser, Over flow pipe and fixing accessories. The Radial arrangement should be complete full set which includes 1. Feed distributor (rubber lined) 2. Over flow Vessel (rubber lined) 3. Under flow Vessel (rubber lined) 4. Over flow Pipes (rubber lined) 5. Knife Gate valves manually operated (s No\s) 6. Pressure gauge 7. Flanges with fasteners and one higher and lower size Vortex finder insert and spigots to be provided as commissioning spares for fine tuning. All steel parts shall be painted as per standard BS/Is specification. Input parameters of Hydro Cyclone Unit Parameter: Sp Gravity of Solids : 2.8 Sp Gravity of Liquid :1 % Solids in feed (w/w) :30-35% slurry flow rate (M3/hr) : 304.3 Total feed solid (TPH) : 125 (3000TPD) Cyclone Feed particle size distribution Size in microns Cum Wt% passing 212.00 100 100.00 97 74.00 91 44.00 72 1. The Material is reasonable abrasive and pH of the material is around 8 to 9. 2. The fines in the under flow (-325# fraction should not exceed 15%) 3000 TPD capacity Hydro Cyclone Classification system should handle 125 metric tons per hour (304m3/hr) of mill tailings @ 30-35% solids and should separate the fines and coarse material. The recovery of Coarse sand in the cyclone under flow should be minimum 21% with -325 fraction in the under flow should not exceed 15%. | No | 1 |
AI Tender Summary
Tender Timeline
May 21, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 07, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 10, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender