Repair To Road Of Various Width At Af Stn Borjhar 2Nd Call
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Jun 2021
0 days left
EMD
1.29 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Borjhar → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair To Road Of Various Width At Af Stn Borjhar 2Nd Call
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-May-2021 | Amendment in BOQ | BOQ | 08-Jun-2021 |
| 2 | 08-Jun-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-Jun-2021 |
BOQ
| Name of Work: REPAIR TO ROAD OF VARIOUS WIDTH AT AF STN BORJHAR (2ND CALL). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor to remove all loose dirt etc, complete all as specified and as directed. | 1475 | 10 Sqm | |
| 2 | 2 | M&L for applying evenly a tack coat using paving bitumen VG-30 @ 5 kg per 10 sqm over existing/ new black top surfaces complete all as specified and directed. | 1475 | 10 Sqm | |
| 3 | 3 | M&L for premix bituminous, macadam laid/ rolled and compacted to required gradient and camber using 8 to 10 tonne power roller consolidated to average thickness 75 mm or less using binder content bitumen of grade VG-30 @ 4% by weight of total mix all as specified and as directed.\nNote:-(i) Any variation in binder content on minus side shall be adjusted @ of Rs 50.00 per kg of binder. No adjustment in price shall be made if the variation is on plus side.\n(ii) The bituminious mix shall be prepared in hot mix plant and transported to the site in clean vehicle and shall be laid by means of a self-propelled mechanical paver finisher with electronic sensor and hydraulic controls all as directed. | 65 | Cum | |
| 4 | 4 | M&L for bituminous premixed semi dense asphaltic concrete carpeting 40 mm thick (compacted thickness) using overall contents of bitumen & waste plastic formulated @ 5.5% of total weight of mix, 8% waste plastic to be quoted in dry process and finally mixing with paving bitumen Vg 30 @ 92% all as per IRC SP 98 2013, laying and rolling with 8 to 10 tonne power roller to uniform surfaces with required gradient and camber complete all as specified and directed. \n Note:- Semidense asphaltic concrete shall be designed as specified . Mix shall be prepared in hot mix plant and laid with self propelled mechanical paver. Overall binder content shall be 5.5% of total weight of mix (i.e 8% shredded plastic and 92% paving bitumen). | 825 | 10 Sqm | |
| 5 | 5 | M&L for Liquid seal coat, applying evenly bituminous binder of grade VG-30 @ 9.8 kg per 10 sqm blinding with 6.3mm size stone chippings @ 0.09 cum per l0 sqm and rolled to a uniform smooth surface using 8 to 10 tonne power roller, complete all as specified and as directed. | 650 | 10 Sqm | |
| 6 | 6 | M&L for bituminous premixed carpet, 30 mm consolidated thicknes with 0.405 cum of stone chippings mixed with 21.9 kg of binder using paving bitumen (VG-30) using hot mix plant and laid manually for the width of road less than 3 m rolled and compacted with 8 to 10 tonne power roller to uniform surfaces with required gradient and camber complete all as specified and directed. | 350 | 10 Sqm | |
| 7 | 7 | M&L for repair to potholes of any depth, not exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sqm using paving bitumen of grade VG- 30, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm using paving bitumen of grade VG- 30, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm rolled and compacted with 8-10 ton power roller complete all as specified and as directed. | 10 | 10 Sqm | |
| 8 | 8 | M & L for painting lines, dashes, arrows, letters, etc on roads, pavements and the like exc 10 cm wide with road marking paint white or golden yellow all as specified and directed. | 300 | Sqm | |
| 9 | 9 | S&F Road stud made out of ABS body confirming to IRC 67-1977 giving reflection panel of red/white on both side, size 100x110x20mm, fixed with epoxy adhesive sealing compound as per manufacture instruction and all as directed. Make: DARK EYE, Model No. DA 52 or equivalent Model of Make 3M/ENNIS/Green Lite. | 300 | Each | |
| 10 | 10 | Supply and fix retor reflective cautionary signage as per IRC : 67, made out of High Intensity Prismatic (HIP) retro reflective sheeting having polycarbonate limit as 30% to 60% by weight and conforming to ASTM 4596 type IV standard. The retro reflective film to be pasted on 2mm thick aluminium sheet conforming to IS-737 standard and back side of the board will be having grey or black powder coating complete with manufacturers guaranty of 7 years for retro reflective sheeting. (Make: Avery Dennison/3M or equivalent as approved by GE) including dismantiling of old board etc complete all as specified and as directed. | 25 | Sqm | |
| 11 | 11 | Supply and fix stainless steel, chrome finish frame work as in road sign board (exclusive of steel sheeting or other covering) including necessary fixing, hanging, fabrication, drilling fastening etc complete using stainless steel screws/nuts and bolts, washers etc complete all as specifed and as directed. | 190 | Kg |
AI Tender Summary
Tender Timeline
Jun 08, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 08, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 15, 2021
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 15, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 17, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender