Public Works Department-PWD has published Construction Of Water Atm Towards Mandakini River At Sh . Kedarnath. Submission Date for this Tender is 03-06-2021. Water Dispenser Tenders in Kedarnath Dham Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-May-2021 | 203/Tender Dated 28.05.2021 | Other | 31-05-2021 |
| 2 | 31-May-2021 | 213/Tender Dated 31.05.2021 | Date | 03-06-2021 |
| Name of Work: Construction of Water ATM towards Mandakini River at Sh. Kedarnath Dham. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Note- Rates to be quoted are inclusive of GST, Except item No 11 and 12 | |||
| 2 | 2 | Civil Work (Item No 4 to 52 | |||
| 3 | 3 | Earth Work | |||
| 4 | 4 | Earth Work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of Soil. | 85 | CuM | |
| 5 | 5 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary Rock | 10 | CuM | |
| 6 | 6 | Extra for every additional Lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil | 41 | CuM | |
| 7 | 7 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. Ordinary rock | 7 | CuM | |
| 8 | 8 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 123 | CuM | |
| 9 | 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) PCC: M20 | 6 | CuM | |
| 10 | 10 | RENFORCED CEMENT CONCRETE WORK | |||
| 11 | 11 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement: All work up to plinth level 1:0.75:1.5 (1 cement : 0.75 coarse sand : 1.5 graded stone aggregate 20 mm nominal size). RCC M30 | 57 | CuM | |
| 12 | 12 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). RCC M25 | 11 | CuM | |
| 13 | 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | 5629 | Kg | |
| 14 | 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more | 2602 | Kg | |
| 15 | 15 | CENTRING AND SHUTTRING | |||
| 16 | 16 | Centring and Shuttering for Foundations, footings, bases of columns, etc. for mass concrete | 57 | Sqm | |
| 17 | 17 | Centring and shuttering for Lintels, beams, plinth beams, girders, bressumers and cantilevers | 429 | Sqm | |
| 18 | 18 | Centring and shuttering for Columns, Pillars, Piers, Abutments, Posts and Struts | 162 | Sqm | |
| 19 | 19 | Centring and Shuttering for Suspended floors, roofs, landings, balconies and access platform | 26 | Sqm | |
| 20 | 20 | MASONRY & PLASTER WORK | |||
| 21 | 21 | Random Rubble Masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) | 20 | CuM | |
| 22 | 22 | Providing and fixing up to floor five level Precast Cement Concrete Solid Block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:1.5:3 (1 Cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). M20 | 9 | CuM | |
| 23 | 23 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :\nRed Sand Stone - Exposed face fine dressed with rough backing ( 50 mm )\n* Locally Available Regional HImalyan Stone is proposed instead of Red Sand Stone Wall ( 300 mm x 150 mm x 50 mm ) | 83 | SqM | |
| 24 | 24 | 12 mm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement | 72 | SqM | |
| 25 | 25 | FLOORING | |||
| 26 | 26 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | 116 | SqM | |
| 27 | 27 | Providing and laying Vitrified Floor Tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete ( 300 x 600 ) | 30 | SqM | |
| 28 | 28 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm | 37 | SqM | |
| 29 | 29 | DOOR & WINDOW WORK | |||
| 30 | 30 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).\n( Second class teak wood ) | 0.05 | CuM | |
| 31 | 31 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as perdirection of Engineer-in-charge. (Note:- Butt hinges and necessary screws shallbe paid separately)\nSecond class teak wood ( 35 mm thick shutters ) | 2.5 | SqM | |
| 32 | 32 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive,including cleaning etc. complete. | 10 | Rmt | |
| 33 | 33 | Door Fittings (Aluminium) | |||
| 34 | 34 | Providing and fixing bright finished brass handles with screws etc. complete:\n( 125 mm ) | 2 | No. | |
| 35 | 35 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :( 200 x 10 mm) | 1 | No. | |
| 36 | 36 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete | 1 | No. | |
| 37 | 37 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 100 x 85 x 5.5 mm (heavy type) | 4 | No. | |
| 38 | 38 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | 1 | No. | |
| 39 | 39 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | 6 | No. | |
| 40 | 40 | M.S. & STEEL WORK | |||
| 41 | 41 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | 100 | Kg | |
| 42 | 42 | Structural steel work riveted, bolted or welded in HOT FINISH SEAMLESS TYPE ( SQUARE OR RECTANGULAR HOLLOW TUBE TYPE ) built up sections , wooden finish, for all kinds of shape & size of column work, including cutting, hoisting, fixing in position and applying a primer coat of approved zinc primer and 2 coats of oil paints of Asian, ICI or equivalent make as approved by architect in due respect to complete all. Truss Work | 11662 | Kg | |
| 43 | 43 | Wood Work | |||
| 44 | 44 | P/ F Teak wood hand rail having size of 90 mm x 75 mm size with approved decorative shape etc.. | 0.1 | CuM | |
| 45 | 45 | 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : P/F Deodar Wood Jhalar (Manually Hand Carved) in 25 mm thick 300 mm wide deodar wood plank. | 50 | RmT | |
| 46 | 46 | "Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).\n{ We proposed Teak Wood )as per DAR 9.1.1.) instead of Sal Wood } | 1.34 | CuM | |
| 47 | 47 | FININSHING & PAINTING WORK | |||
| 48 | 48 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. | 72 | Sqm | |
| 49 | 49 | French spirit polishing :\nTwo or more coats on new works including a coat of wood filler | 120 | Rmt | |
| 50 | 50 | Roof | |||
| 51 | 51 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlappingof sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m²\n | 191 | Sqm | |
| 52 | 52 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m² | 38 | Rmt | |
| 53 | 53 | Electrical Work (Item No 55 to 106) | |||
| 54 | 54 | DISTRIBUTION BOARDS | |||
| 55 | 55 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door (IP43, IK09) | 1 | Nos | |
| 56 | 56 | Supply, installation, testing and commissioning 'B' series, SP MCB Supply, installation, testing and commissioning 5 amps to 32 amps rating, 240 volts, 'B' series, miniature circuit breaker suitable for lighting and other loads of folloeing poles int the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole | 18 | Nos | |
| 57 | 57 | Supplying and fixing following rating, four pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A | 1 | Nos | |
| 58 | 58 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A | 3 | Nos | |
| 59 | 59 | MV CABLES | |||
| 60 | 60 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. | |||
| 61 | 61 | Upto 35 sq. mm | 40 | Mtr | |
| 62 | 62 | Supply of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.\nApproved Makes- Approved Makes- HAVELLS / POLYCAB / RPG-KEC | |||
| 63 | 63 | 4C x 10 Sq.mm. CU XLPE armored cable | 15 | mtr | |
| 64 | 64 | 3C x 10 Sq.mm. CU XLPE armored cable | 10 | mtr | |
| 65 | 65 | 3C x 6 Sq.mm. CU XLPE armored cable | 5 | mtr | |
| 66 | 66 | 3C x 4 Sq.mm. CU XLPE armored cable | 10 | mtr | |
| 67 | 67 | CABLE TERMINATION | |||
| 68 | 68 | Supply and Providing heavy duty double compression brass gland and lugs end terminations,IP 66 complete,SIBG type, for the cable specified under above item with Bi-metallic lugs using crimping tool, Insulation tape, Identification tags etc., including end termination and Earthing of Gland.\nApproved Makes- DOWELL’S / 3D / HEX JAINSON / COMET / HMI/CCI / 3M | |||
| 69 | 69 | 4C x 10 Sq.mm. CU XLPE armored cable | 2 | Nos | |
| 70 | 70 | 3C x 10 Sq.mm. CU XLPE armored cable | 2 | Nos | |
| 71 | 71 | 3C x 6 Sq.mm. CU XLPE armored cable | 2 | Nos | |
| 72 | 72 | 3C x 4 Sq.mm. CU XLPE armored cable | 2 | Nos | |
| 73 | 73 | INTERNAL WORKS | |||
| 74 | 74 | POINT WIRING | |||
| 75 | 75 | Supply, installation, connection, testing & commissioning of following outlet points as per Specification & IS. The unit rate shall be complete with all necessory complete wiring from LDB to respective switchboard & switchboard to Point, including the outlet points with connector, sockets & all necessory items require to complete job. A point shall include in addition to phase & neutral wire, earth continuity wire from LDB to the final termination at outlet points. | |||
| 76 | 76 | Cost includes all the wiring, outlet points shall be done in a surface / concealed manner with ISI approved rigid FR PVC, conduit of minimum 25 mm. dia. using 650 V FRLS copper conductor wire, modular switches with suitable plate, MS back box with brass chromium / cadmium plated machine screws etc.The cost shall also include the cost of the GI back plate, switches, Sockets). Contractor to measure lenght of wiring as per drawing given. No extra cost to be given for wiring. | |||
| 77 | 77 | Wire Size for Lighting circuit | |||
| 78 | 78 | Lighting circuit = 2 x 2.5 mm2 (P+N), 1 x 2.5 mm²(E)(from LDB to Switch board) | |||
| 79 | 79 | From Switch Board to Light Point = 2 x 1.5 mm2 (P+N), 1 x 1.5 mm²(E) | |||
| 80 | 80 | Power circuit (for heater and geyser) =2x4.0 sqmm (P+N) ,1x4 sqmm(E) | |||
| 81 | 81 | Cost of MCB shall not be considered in point rate. | |||
| 82 | 82 | Wherever sensor require, wiring to be done accordingly. | |||
| 83 | 83 | Making of zari in wall using only electric cutter and finishing the surface as it was. | |||
| 84 | 84 | earthing of fitting | |||
| 85 | 85 | electrical connection to the fixture from the out let point/ceiling rose. | |||
| 86 | 86 | Wire breaded PVC flexible conduit from ceiling point to light fixture. | |||
| 87 | 87 | Supply and fixing of supporting frame, hardware and n/c tools and tackles etc For Exhaust fan | |||
| 88 | 88 | Point wiring in PVC conduit, with modular type switch: Wiring for light point/ fan ponit/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc.as required- Group A | 20 | Nos. | |
| 89 | 89 | light plug point modular type accessories: Supplying and flxing suitable size GI box with modular plae and cover in front on surface or in recess, including providing and flxing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, onnection, painting etc. as required. (For light plugs to be used in non residential buildings). | 5 | Nos. | |
| 90 | 90 | power plug point modular type accessories: Supplying and flxing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and flxing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required. | 8 | Nos. | |
| 91 | 91 | Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire | 25 | Mtr. | |
| 92 | 92 | Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire | 570 | Mtr. | |
| 93 | 93 | Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire | 20 | Mtr. | |
| 94 | 94 | S/F brass holder Supplying and flxing brass batten/angle holder including connection etc. as required. | 20 | Nos. | |
| 95 | 95 | Installation of exhaust fan in the existing opening, including\nmaking good the damage, connection, testing, commissioning\netc. as required upto 450mm sweep. | 1 | Nos | |
| 96 | 96 | CONDUIT & OTHER | |||
| 97 | 97 | Supply, installation, testing and commissioning of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same\nin case of recessed conduit as required. | |||
| 98 | 98 | 25 mm | 50 | Mtr. | |
| 99 | 99 | 32 mm | 25 | Mtr. | |
| 100 | 100 | LIGHT FIXTURES | |||
| 101 | 101 | 20W, 2000 Lumen, IP20 4FT Wall/Ceiling mounted LED light fixtures:\nSupply, Installation, assembling, connection, testing & commissioning of 20W, 2000 Lumen, IP20 4FT Wall/Ceiling mounted LED light fixtures equivalent to Philips make BN021C LED20S PSU CW GR S2 complete with suitable rating lamps and all other necessary accessories to complete the installations as per specifications. \nApproved Makes-Philips/Wipro/K-Lite | 8 | Nos | |
| 102 | 102 | 18W, 2000 Lumen Surface mounted LED Down light fixtures:\nSupply, Installation, assembling, connection, testing & commissioning of 18W, 2000 Lumen Surface mounted LED Down light fixtures equivalent to Philips make SM251C LED20S complete with suitable rating lamps and all other necessary accessories to complete the installations as per specifications.\nApproved Makes-Philips/Wipro/K-Lite | 1 | Nos | |
| 103 | 103 | Roof Light : \nSupply, Installation, assembling, connection, testing & commissioning of CEILING LED Fixture NCL-02S -LED 12W,LED,3000k Electronic Driver which offers Protection against Short Circuit, Over- Voltage & Over- Current, IP 65 protection,CRI > 70,voltage input AC100-240V.Body-Die-casting and Extruded aluminium Body with Surface Anti-ageing electrostatic spray processing & screen. Body colour-RAL 9005 Matt ,Dimension-126mm(Dia.)x138mm(H),Weight-0.75kgs. Estimated Lifetime-L70 @ 50,000hours minimum.\nApproved Make - NERI-LED Fixture NCL-02S -LED 12W/Iguzzini/Bega/Hess/DW Windsor | 12 | Nos | |
| 104 | 104 | Supply of exhuast fan (450mm)\nApproved Makes-Havells/Usha/Almonard | 1 | Nos | |
| 105 | 105 | O & M FOR 5 YEARS | |||
| 106 | 106 | Operation and maintanance for 5 year for all parts (Maximum 7.5 % of all Electrical Items 14 to item 20.04) | 1 | Job | |
| 107 | 107 | Plumbing Work (Item No 107 to 143) | |||
| 108 | 108 | Sanitary fixutures and fittings | |||
| 109 | 109 | Providing and fixing 15mm C.P. brass angle valve with C.P. copper connecting pipe 450 mm long and nuts, washer and brass flange complete, including cutting and making good the wall where required. \nANGLE VALVE : Jaquar, Model No. FLR-5053N\nBRAIDED HOSE Copper Pipe : Jaquar, Model no. ALD-CHR-805B | 4 | Each | |
| 110 | 110 | Providing and fixing in position 15 mm C.P. brass long body bib cocks of best quality necessary fittings with wall Flange etc. complete in all respects including cutting and making good the walls etc.\nBIB COCK : Jaquar Continental, Model No: CON-107KN | 25 | Each | |
| 111 | 111 | Internal drainage and rain water | |||
| 112 | 112 | Providing, Fixing, testing & commissioning of 50 mm Outer dia HDPE soil & waste Pipe as per EN 12056, DIN 4102-B2 complete including all fittings, specials, jointing & hydraulic testing the joints & pipes as mentioned in the specification etc. and making connection with down take wherever required to satisfaction of engr / arch with proper care, protecting fittings & pipes till the final handing over etc as directed by E-I-C complete as per specifications & drawing provided for all places, all heights & all levels as per direction of engineer in charge. | 2 | Rmt | |
| 113 | 113 | Providing, Fixing, testing & commissioning of 75 mm Outer dia HDPE soil & waste Pipe as per EN 12056, DIN 4102-B2 complete including all fittings, specials, jointing & hydraulic testing the joints & pipes as mentioned in the specification etc. and making connection with down take wherever required to satisfaction of engr / arch with proper care, protecting fittings & pipes till the final handing over etc as directed by E-I-C complete as per specifications & drawing provided for all places, all heights & all levels as per direction of engineer in charge. | 9 | Rmt | |
| 114 | 114 | Providing, Fixing, testing & commissioning of 110 mm Outer dia HDPE soil & waste Pipe as per EN 12056, DIN 4102-B2 complete including all fittings, specials, jointing & hydraulic testing the joints & pipes as mentioned in the specification etc. and making connection with down take wherever required to satisfaction of engr / arch with proper care, protecting fittings & pipes till the final handing over etc as directed by E-I-C complete as per specifications & drawing provided for all places, all heights & all levels as per direction of engineer in charge. | 5 | Rmt | |
| 115 | 115 | Providing & fixing HDPE P Trap of 110mm dia diameter With Height riser/necessary distance piece for wash basin/sink/Urinal drain connection with and 150x150mm heavy duty openable grating, making necessary SLAB /WALL/Beam holes and cutting walls, etc complete. | 4 | Each | |
| 116 | 116 | Providing and fixing 100 mm sand cast Iron grating for P trap. | 6 | Each | |
| 117 | 117 | Internal water supply work | |||
| 118 | 118 | Providing and fixing of 63 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineerin- Charge. Internal Exposed on walls | 1 | Rmt | |
| 119 | 119 | Providing and fixing of 20 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.\nConcealed work,including cutting chases and making good the wall etc. | 7 | Rmt | |
| 120 | 120 | Providing and fixing of 25 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc. | 4 | Rmt | |
| 121 | 121 | Providing and fixing of 32 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc. | 7 | Rmt | |
| 122 | 122 | Providing and fixing of 40 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc. | 7 | Rmt | |
| 123 | 123 | Providing and fixing of 50 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc. | 12 | Rmt | |
| 124 | 124 | Providing and fixing of antifreez flexible heating cable Raychem XL - 26XL2-ZH, output 26 watts per Meter @ 5 Degree celcius, cold applied conduit for water protection, Pipe strap for required diameter and all required accessories for Heat Tracing of water supply piping, etc. complete the job. | 35 | Rmt | |
| 125 | 125 | Providing and fixing Insulation entry kit for antifreez flexible heating cable Raychem and all required accessories etc. complete the job. | 1 | Each | |
| 126 | 126 | Providing and fixing of power connection box with integral 2M power cable for antifreez flexible heating cable Raychem and all required accessories etc. complete the job. | 1 | Each | |
| 127 | 127 | Providing and fixing of T connection for 3 Cables for antifreez flexible heating cable Raychem and all required accessories etc. complete the job. | 1 | Each | |
| 128 | 128 | Providing and fixing of Glass tape for antifreez flexible heating cable Raychem and all required accessories etc. complete the job. | 35 | Rmt | |
| 129 | 129 | Providing and fixing of Thermostate lower temperature upto -15 degree celcius & Controller for antifreez flexible heating cable operation for pipe freezing protection & Warning Label in English Bold Latter and all required accessories etc. complete the job. | 1 | Each | |
| 130 | 130 | Providing and fixing of Aluminium adhesive tape for antifreez flexible heating cable Raychem and all required accessories etc. complete the job. | 35 | Rmt | |
| 131 | 131 | Providing and fixing 9 mm thick preformed syntheic rubber polymeric compound prefromed sleeves with all accessories & clamp, support , etc. (Inside Toilet) for 20 dia pipe | 7 | Rmt | |
| 132 | 132 | Providing and fixing 9 mm thick preformed syntheic rubber polymeric compound prefromed sleeves with all accessories & clamp, support , etc. (Inside Toilet) for 25 dia pipe | 4 | Rmt | |
| 133 | 133 | Providing and fixing 9 mm thick preformed syntheic rubber polymeric compound prefromed sleeves with all accessories & clamp, support , etc. (Inside Toilet) for 32 dia pipe | 7 | Rmt | |
| 134 | 134 | Providing and fixing 9 mm thick preformed syntheic rubber polymeric compound prefromed sleeves with all accessories & clamp, support , etc. (Inside Toilet) for 40 dia pipe | 7 | Rmt | |
| 135 | 135 | Providing and fixing 9 mm thick preformed syntheic rubber polymeric compound prefromed sleeves with all accessories & clamp, support , etc. (Inside Toilet) for 50 dia pipe | 12 | Rmt | |
| 136 | 136 | Supply, installation, laying of Insulation of '50' mm thick PUF Section having density of 36 to 40 Kg/M3 covered with UV Paint Work for 63MM diameter Pipe and inbsulation shall be covered with 3MM HDPE/Approved Equivalent protective coating over the pipe with all accessories and clamp, support. The pipe shall be applied with VOC free water based adhesive only. Insulation shall be for all pipes complete with required elbows (short and long), Tees, Reducers, flanges, fittings as required. | 1 | Rmt | |
| 137 | 137 | Providing and fixing of 40mm diameter gun metal gate valve with C.I. wheel of approved quality | 4 | Each | |
| 138 | 138 | Providing and fixing of 50mm diameter gun metal gate valve / scour valve with C.I. wheel of approved quality | 1 | Each | |
| 139 | 139 | Providing and fixing of 65mm diameter gun metal gate valve with C.I. wheel of approved quality | 1 | Each | |
| 140 | 140 | Supplying, fitting & fixing of 40mm dia Pressure Reducing Valve set of approved make & best quality having by-pass arrangement consisting of the following:- | 1 | Each | |
| 141 | 141 | Supply installation, testing and commissioning of drinking water filtration system comparision of multigrade sand filter, activated carbon filter, Ultra-filtration & High penetration Ultraviolet. The scope shall include interconnection piping, valves, instruments & pump system, all other required accessories, pump set is auto operation, including dry run protection,all valve controls, interconnecting piping of suction and discharge header, control panel IP 55, ON-OFF and Trip Indicating lamps in each incomer and outgoing feeders, adequate NO NC contacts for integrating with Building Automation System(BMS), interlocking arrangement, level controller and other necessary cabeling works etc. complete the job. \nCapacity: 500LPH | 2 | Each | |
| 142 | 142 | O & M FOR 5 YEARS | |||
| 143 | 143 | Operation and maintanance for 5 year for all parts as per above BOQ (7.5% of cost) | 1 | Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
