Tender Enquiry For Supply Of Other Cat B Stores, 1033 (I) ESPL, C/O 99 APO LOKABALI-Arunachal Pradesh

Tender Enquiry For Supply Of Other Cat B Stores-2 Is Test Sieves Of 450 Mm Dia As Per Is 460-1962 Made Of High Polished Gi Frame, End Cott Type Double Folded Bottom, Beading At Top, Without Joining And Tightly Fitting With Each Other, Finished As Per Iss / Bss / Astm Complete With Lid & Pan Set Of Size 125 Mm, 90 Mm, 75 Mm, 63 Mm, 53 Mm, 45 Mm, 26.5 Mm, 22.5 Mm, 13.2 Mm, 11.2 Mm, 9.5 Mm, 5.6 Mm, 4.75 Mm, 2.36 Mm, 0.85 Mm, ( Make : Bent / Labline / Primetek ) . 3 Brass Sieves 200Mm Internal Dia ( Brass Frame ) Consisting Of Size 600 Micron, 425 Micron, 300 Micron, 150 Micron, 75 Micron Complete With Lid And Pan As Per Is: 460-1962 ( Make : Bent / Labline / Primetek ) 4 Motorised Sieve Shaker Capable Of Shaking 200 Mm And 450 Mm Dia Sieves Electrically Operated With Time Switch 5 Rebound Hammer : Make : Langry, Capacity 70 Mpa With Dispersion Graph, Digital Rebound Hammer, Units: Kg / Cm2, Model: Ht225-Nb With Carrying Case Lcd Display, 100 Reading Saving Option As Per Is 13311 ( Part Ii ) 6 Weighing Scale Electronic Capacity 5 Kg ( Accuracy 0.01 Gm ) With Tare Facility And In-Built Battery Backup Make : Citizen / Danwer With Calibration Certificate 7 Platform Type Weighing Machine Electronic Capacity 50 Kg ( Accuracy 5 Gm ) , Platform Size 400 X 400 Mm With Tare Facility And In-Built Battery Backup Make : Danwer With Calibration Certificate 8 Laboratory Oven Of Inner Chamber Size 12 X 12 X 12 With The Following Specifications:- The Oven Is Of Double Walled Construction. Outer Wall Is Of Mild Steel, Internal Chamber Is In Stainless Steel And It Will Be Well Insulated With Glass Wool. The Heating Is From Bottom Heaters Made Of Nichrome Wire, Fitted With Motorized Air Circulation System With Digital Controller Cum Indicator Temperature Range 50 Degree Centigrade To 240 Degree Centigrade As Per Is Standard ( For Checking Absorption And Water Content ) 9 Aggregate Impact Value Testing Machine, Mild Steel, Dimension As Per Is Standard And Shall Be Consisting Of A Base Weighing Between 22- 30 Kg With A Lower Surface Of Not Less Than 300 Mm And Support Columns To Form A Rigid Frame Work Around The Quick Release Trigger Mechanism To Ensure An Effective Free Fall Of The Hammer During Test. The Free Fall Shall Be Adjusted Through 380 + 5.0Mm. The Hammer Should Be Provided With A Locking Arrangement. A Metal Top ( Hammer ) Weighing 13.5 To 14.0 Kg. The Lower End In Cylindrical Shape, 100Mm In Diameter And 5Cm Long With A 2Mm Chamber At The Lower Edge And Case Hardened. Shall Be Complete With A Cylindrical Cup, 102Mm Dia X 50Mm Depth, One Measure 75Mm Dia X 50Mm Deep And Tamping Rod Of Circular Cross Section 10Mm In Diameter And 230Mm Long Rounded At One End. 10 Flakiness And Elongation Index Test Apparatus Chromed As Per Is Standard Make : Rajco 11 Slump Cone Apparatus With Tamping Rod And Moulds As Per Is 1199:1959 With The Following Specifications:- The Mould For The Test Specimen Shall Be In The Form Of The Frustum Of A Cone Having The Following Internal Dimensions: Bottom Diameter: 200 Mm; Top Diameter: 100 Mm And Height: 300 Mm.The Mould Shall Be Constructed Of Metal ( Brass Or Aluminium Shall Not Be Used ) Of At Least L.6 Mm ( Or 16 Bg ) Thickness And The Top And Bottom Shall Be Open And At Right Angles To The Axis Of The Cone. The Mould Shall Have A Smooth Internal Surface. It Shall Be Provided With Suitable Foot Pieces And Also Handles To Facilitate Lifting It From The Moulded Concrete Test Specimen In A Vertical Direction As Required By The Test. The Tamping Rod Shall Be Of Steel Or Other Suitable Material, 16 Mm In Diameter, 600 Mm Long And Rounded At One End. Make : Rajco / Primetek 12 Cube Mould Of Size 150Mm X 150Mm X 150Mm Dimension As Per Is 10080-1982 Made Of Cast Iron, Weight 8 Kgs. 13 Vicat Needle Apparatus As Per Is : 5513-1976 With The Following Specifications :- The Apparatus Consists Of Metallic Frame Bearing A Freely Moveable Rod With A Cap At Top, A Vicat Mould 70Mm Dia. At The Base, 50Mm Dia. At The Top And 40Mm High And With A Glass Base Plate, Consistency Plunger, Initial And Final Needles In A Nice Case. Make : Rajco 14 Camber Templates / Board As Per Is Standard - Nhdl-2 15 Benzene Oil 16 Laser Temperature Indicator For Bituminous Mixes ( For Checking Bitumen Mix ) 17 Labline Enamel Tray 450 X 300 X 40 Mm 18 Digital Stop Watch, Make Racer 19 Bitumen Heating Thermometer For Reading Upto 400ºc Dial Type 20 Pycnometer As Per Is: 2386 ( Part Iii ) - 1963 With Brass Cone. Capacity 900Ml Aprox. Having A Metal Conical Screw Top With A 6-Mm Diameter Hole At Its Apex. 21 Dry Field Density Apparatus As Per Is Standard, 150Mm Dia

Refer document

INR 5000.0 /-

INR 2.50 Lakhs /-

Name of Work : SUPPLY OF OTHER CAT-B STORES
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	SUPPLY AND INSTALLATION OF VSAT
2	1.01	IS Test Sieves of 450 mm dia as per IS 460-1962 made of high polished GI frame, end cott type double folded bottom, beading at top, without joining and tightly fitting with each other, finished as per ISS/BSS/ASTM complete with Lid & Pan set of size 125 mm, 90 mm, 75 mm, 63 mm, 53 mm, 45 mm, 26.5 mm, 22.5 mm, 13.2 mm, 11.2 mm, 9.5 mm, 5.6 mm, 4.75 mm, 2.36 mm, 0.85 mm, (Make : Bent/ Labline/ Primetek).	IC01	4	Set
3	1.02	Brass Sieves 200mm internal dia (Brass Frame) consisting of size 600 Micron, 425 Micron, 300 Micron, 150 Micron, 75 Micron complete with Lid and Pan as per IS: 460-1962 (Make : Bent/Labline/Primetek)	IC02	4	Set
4	1.03	Motorised Sieve shaker capable of shaking 200 mm and 450 mm dia sieves electrically operated with time switch	IC03	4	Nos
5	1.04	Rebound Hammer : Make : Langry, Capacity 70 mpa with dispersion graph, Digital Rebound Hammer, Units: Kg/Cm2, Model: HT225-NB with Carrying Case LCD Display, 100 reading Saving Option as per IS 13311 (part II)	IC04	1	Nos
6	1.05	Weighing Scale Electronic Capacity 5 Kg (accuracy 0.01 gm) with tare facility and in-built battery backup Make : Citizen/ Danwer with calibration certificate	IC05	1	Nos
7	1.06	Platform type Weighing Machine Electronic Capacity 50 Kg (accuracy 5 gm), platform size 400 x 400 mm with tare facility and in-built battery backup Make : Danwer with calibration certificate	IC06	1	Nos
8	1.07	Laboratory Oven of Inner Chamber size 12" X 12" X 12" with the following specifications:- The oven is of double walled construction. Outer wall is of mild steel, internal chamber is in stainless steel and it will be well insulated with glass wool. The heating is from bottom heaters made of Nichrome Wire, fitted with motorized air circulation system with digital controller cum indicator temperature range 50 degree centigrade to 240 degree centigrade as per IS standard (for checking absorption and water content)	IC07	1	Nos
9	1.08	Aggregate Impact Value Testing Machine, Mild Steel, Dimension as per IS Standard and shall be consisting of a base weighing between 22- 30 kg with a lower surface of not less than 300 mm and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall shall be adjusted through 380 + 5.0mm. The hammer should be provided with a locking arrangement. A metal top (Hammer) weighing 13.5 to 14.0 kg. The lower end in cylindrical shape, 100mm in diameter and 5cm long with a 2mm chamber at the lower edge and case hardened. Shall be complete with a cylindrical cup, 102mm dia x 50mm depth, one measure 75mm dia x 50mm deep and tamping rod of circular cross section 10mm in diameter and 230mm long rounded at one end.	IC08	1	Nos
10	1.09	Flakiness and Elongation Index Test Apparatus Chromed as per IS standard Make : Rajco	IC09	2	Set
11	1.1	Slump Cone Apparatus with Tamping Rod and Moulds as per IS 1199:1959 with the following specifications:- The mould for the test specimen shall be in the form of the frustum of a cone having the following internal dimensions: Bottom diameter: 200 mm; Top diameter: 100 mm and Height: 300 mm.The mould shall be constructed of metal (brass or aluminium shall not be used) of at least l.6 mm (or 16 BG ) thickness and the top and bottom shall be open and at right angles to the axis of the cone. The mould shall have a smooth internal surface. It shall be provided with suitable foot pieces and also handles to facilitate lifting it from the moulded concrete test specimen in a vertical direction as required by the test. The tamping rod shall be of steel or other suitable material, 16 mm in diameter, 600 mm long and rounded at one end. Make : Rajco/Primetek	IC10	2	Set
12	1.11	Cube Mould of size 150mm x 150mm x 150mm dimension as per IS 10080-1982 made of cast iron, weight 8 Kgs.	IC11	18	Nos
13	1.12	VICAT Needle Apparatus as per IS : 5513-1976 with the following specifications :- The apparatus consists of metallic frame bearing a freely moveable rod with a cap at top, a vicat mould 70mm dia. at the base, 50mm dia. at the top and 40mm high and with a glass base plate, consistency plunger, initial and final needles in a nice case. Make : Rajco	IC12	1	Set
14	1.13	Camber Templates/Board as per IS standard - NHDL-2	IC13	4	Nos
15	1.14	Benzene Oil	IC14	3	Ltr
16	1.15	Laser Temperature Indicator for bituminous Mixes (For checking bitumen mix)	IC15	2	Nos
17	1.16	Labline Enamel Tray 450 x 300 x 40 mm	IC16	4	Nos
18	1.17	Digital Stop Watch, Make Racer	IC17	2	Nos
19	1.18	Bitumen Heating Thermometer for reading upto 400ºC Dial type	IC18	2	Nos
20	1.19	Pycnometer as per IS: 2386 (Part III)- 1963 with Brass Cone. Capacity 900ml aprox. having a metal conical screw top with a 6-mm diameter hole at its apex.	IC19	3	Nos
21	1.2	Dry Field Density Apparatus as per IS standard, 150mm dia	IC20	2	Nos