Military Engineer Services-MES has published Welcome Maint And Repair To Flooring Kitchen Cupboard Joinery Plumbing Over Head Tanks And Certain Br Works At Md Accn In Zone -I Under Ge ( A ) Jaisalmer. Submission Date for this Tender is 14-06-2021. Civil Work Tenders in Jaisalmer Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Jun-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-06-2021 |
| Name of Work: WELCOME MAINT AND REPAIR TO FLOORING, KITCHEN CUPBOARD, JOINERY, PLUMBING, OVER HEAD TANKS AND CERTAIN B/R WORKS AT MD ACCN IN ZONE -I UNDER GE (A) JAISALMER | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Qty | Unit | |
| 1 | 1 | M&L preparation of old decorated wall surfaces of any description and applying one coat of white wash all as directed by Engg-in- Charge. | 800 | Sqm | |
| 2 | 2 | All as per item no 1 here in before but on ceiling. | 901 | Sqm | |
| 3 | 3 | M&L perpartion of old existing wall surfaces including cornices, plastered or un-plastered surfaces by brooming down or steel wire brushing, moss efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint over and including filling up of holes by wall care putty wherever required all as directed by Eng-in-Charge. | 6874 | Sqm | |
| 4 | 4 | M&L preparation of old decorated wall surfaces of any description and applying one coat of oil emulsion distemper all as directed by Engg in Charge. Complete removal of existing treatment | 5910 | Sqm | |
| 5 | 5 | M&L preparation of old decorated wall surfaces over a coat of alkani resistant primer of any description and applying two coat of oil emulsion distemper all as directed by Engg in Charge. | 560 | Sqm | |
| 6 | 6 | M&L preparation of old decorded wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint | 400 | Sqm | |
| 7 | 7 | M&L preparation of old decorded steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint | 210 | Sqm | |
| 8 | 8 | Taking down cement plaster from brick or concrete wall surfaces including raking out joints, hacking for key scrubbing down with water complete all as specified and as directed. | 270 | Sqm | |
| 9 | 9 | M&L rendering 15 mm thk on brick or concrete surface in CM 1:6 and surface finished even and smooth without using extra cement. | 150 | Sqm | |
| 10 | 10 | M&L for 10mm thick rendering in cement morter 1:4 on fair face of brick wall or concrete surfaces, finished even & fair complete all as specified and directed by Engr-in-Charge. | 120 | Sqm | |
| 11 | 11 | M&L for preparation of newly plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant paint complete all as specified and as directed by Engr-in-Charge. | 150 | Sqm | |
| 12 | 12 | M&L preparation of new plastered surfaces of any description and applying two coats of oil emulsion distemper over a coat of wall putty on wall and chalk whiting prepara-tory to distempering | 120 | Sqm | |
| 13 | 13 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles). | 230 | Sqm | |
| 14 | 14 | M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement. | 170 | Sqm | |
| 15 | 15 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including scread bed or bedding layer 15mm thick in CM 1:6 all as specified. | 20 | Sqm | |
| 16 | 16 | M&L for vetrified ceramic coloured tiles 9 to 10 mm thick area of each tile not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM 1:6 all as directed (size 600mm to 600mm) | 85 | Sqm | |
| 17 | 17 | M & L non skid ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding .11Sqm but n.exc .18Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in CM 1:6. | 65 | Sqm | |
| 18 | 18 | M & L glazed ceramic coloured tiles (450x300mm)x 7mm thick joint free in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 etc. | 60 | Sqm | |
| 19 | 19 | Taking down shutters of any description not exc 1 Sqm each all as specified and as directed | 2 | Per Leaf | |
| 20 | 20 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each all as specified and as directed | 15 | Per Leaf | |
| 21 | 21 | Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 and white wash and cement base paint complete finished all as directed | 8 | Each | |
| 22 | 22 | Ditto- all as per item No 36 above but exc 1.5 sqm and n exc 4 sqm each | 6 | Each | |
| 23 | 23 | S & F factory made second class hard wood plain framed panelled shutters 35mm thick with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle tone veneers, fixed to chowkhat all as specified and as directed. | 22 | Sqm | |
| 24 | 24 | S & F Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats second class hard wood 35mm thick for door shutter all as specified and directed | 16 | Sqm | |
| 25 | 25 | Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tubes, S&F in opening as per specification & drawing given in \nSSR 2010. | 38.08 | RM | |
| 26 | 26 | M & L for factory made solid PVC moulded door shutter , 28 to 30mm thick (stiles) wuth 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the foront face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing. | 18.018 | Sqm | |
| 27 | 27 | S & F aluminium anodized tower bolt 150mm size complete all as specified and directed. | 64 | Each | |
| 28 | 28 | S & F Butt hinges Aluminum 100 mm type C21 complete all as specified and as directed | 39 | Each | |
| 29 | 29 | S & F aluminium handle 125 mm cast type anodized | 94 | Each | |
| 30 | 30 | S & F mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed | 27 | Each | |
| 31 | 31 | S & F Butt hinges MS 100 mm cold rolled complete all as specified and as directed | 88 | Each | |
| 32 | 32 | S & F steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay ,complete with glazing bars ,devetailed or welded | 5.76 | Sqm | |
| 33 | 33 | S & F figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and all as specified. | 4.5 | Sqm | |
| 34 | 34 | S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and all as specified. | 3 | Sqm | |
| 35 | 35 | S&F Galvanized mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples fixed | 17 | Sqm | |
| 36 | 36 | M&L for Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified. | 54 | Kg | |
| 37 | 37 | M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified\n | 32 | Sqm | |
| 38 | 38 | Sheet glass, 4.80 mm ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane | 45 | Sqm | |
| 39 | 39 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty approved by Engr-in-Charge | 4 | Each | |
| 40 | 40 | S&F aluminium die cast body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed approved by Engr-in-Charge | 12 | Each | |
| 41 | 41 | S & F in repair anodised aluminium alloy Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. | 210 | Rm | |
| 42 | 42 | Dismantling boarding of any description fixed in any position fixed with screws Complete all as Specified & directed. | 22 | Sqm | |
| 43 | 43 | S & F 18/19mm thick pre-laminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination alround 6mm th teak fillets fixed in kitchen CB or pelmet complete all as specified. | 22 | Sqm | |
| 44 | 44 | M&L for 2nd class hard wood fillets square, rectangular as in lippings fixed with nails of area exc 3Sqcm but n.exc 6sqcm complete all as specified & directed. | 66 | RM | |
| 45 | 45 | S & F 40mm width of flaps (when open) continuous (piano) hinges, mild steel bright finish or electroganised fiwed to wooden or angke iron frame Complete all as Specified. | 44 | RM | |
| 46 | 46 | S&F40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as Specified. | 22 | Each | |
| 47 | 47 | S&F 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws /fixed in repairs Complete all as Specified & directed. | 24 | Each | |
| 48 | 48 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as Specified. | 22 | Each | |
| 49 | 49 | Dismantling water tanks and removing to store (exc 250 and not exc 500 ltr capacity) | 5 | Each | |
| 50 | 50 | Dismantling water tanks and removing to store (exc500 and not exc 1000 ltr cap) | 2 | Each | |
| 51 | 51 | S&F 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in postion all as directed by Engg-in-Charge | 5 | Each | |
| 52 | 52 | -Ditto- All as per above but 1000 ltr capacity. | 2 | Each | |
| 53 | 53 | S&F in repair CP bib taps 15 mm dia of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. | 30 | Each | |
| 54 | 54 | S&F in repair pillar taps 15 mm bore cast copper alloy with capstan head chromium plated screwed down high pressure with or without 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed. | 22 | Each | |
| 55 | 55 | S&F in repair stop valve 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union. | 50 | Each | |
| 56 | 56 | Ditto- all as per item No 4 above but 20 mm dia. | 15 | Each | |
| 57 | 57 | S&Fin repair vitreous china squatting pan orissa pattern complete of size 580 x 440 mm white with integral foot rest and making good to the floor complete. | 6 | Each | |
| 58 | 58 | S&Fin repair wash hand basin vitereous china flat back size 550 x 400 mm white incl CP waste coupling waste pipe brackets complete. | 5 | Each | |
| 59 | 59 | S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long and complete. | 5 | Each | |
| 60 | 60 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. | 15 | Each | |
| 61 | 61 | S & F in repair 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end | 45 | Each | |
| 62 | 62 | S&F in repair PVC connection pipe for WHB, cistern, gysers etc of size 15 mm dia and 450 mm long fixed in repairs | 30 | Each | |
| 63 | 63 | S&F in repair CP grating(with & without hole) for Nahani trap and floor trap of size 100 mm dia fixed in repairs. | 30 | Each | |
| 64 | 64 | Cutting chases for concealed water tubing etc and making good in CM cutting exc 10 cm but not exc 20 cm girth in stone, concrete block or slab walls. | 20 | RM | |
| 65 | 65 | S&F in repair Swivel shower rose with arm 195mm long with bend of 45 degree with flange of PTMT any colour fixed in repairs. | 10 | Each | |
| 66 | 66 | S&F in repair PVC ball valve 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) | 5 | Each | |
| 67 | 67 | --Ditto-- as in item above but 20mm dia | 10 | Each | |
| 68 | 68 | S & F in repair Vitreous china wash down water closet pan(Pedestal pattern), white (EWC)with necessary P/S Trap and fixed in repairs including jet spray and seat cover | 10 | Each | |
| 69 | 69 | S & F in repair CP brass Towel rail 20mm dia, D type, 60 cm long complete fixed in wall with screws in repairs. | 15 | Each | |
| 70 | 70 | S&F in repairs soap dish, any type, fixed to plugs with chromium plated\nbrass screws | 15 | Each | |
| 71 | 71 | S&F Shelf of PTMT fixed with and including Chromium plated brass screws and\nwooden/plastic cleats (Minimum weight 300gms) | 10 | Each | |
| 72 | 72 | S&F in repair toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws | 8 | Each | |
| 73 | 73 | S&F in repair 15 mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed | 40 | Each | |
| 74 | 74 | S&F in repair PVC acrylic shelf for WHB 450 mm long | 10 | Each | |
| 75 | 75 | S&F in repairs Vitreous china urinals with urinal spreader, full stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing or as directed | 2 | Each | |
| 76 | 76 | S&F in repair PVC seat cover black/white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete | 12 | Each | |
| 77 | 77 | S&F in repair bathroom mirror cabinet, make Prayag or equivalent approximate size 500x400mm. | 5 | Each | |
| 78 | 78 | S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm | 2 | Each | |
| 79 | 79 | S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm | 2 | Each | |
| 80 | 80 | S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm dia bore | 7 | Each | |
| 81 | 82 | S&F in repair two way angle valve for fixing in 15mm dia bore all as specified and directed. | 12 | Each | |
| 82 | 83 | S&F in repair Health Faucet for EWC all as specified and directed | 3 | Each | |
| 83 | 84 | S&F in repair Jet spray for EWC all as specified and directed | 5 | Each | |
| 84 | 85 | Taking up or down steel tubing and connections of following size all as directed by Engg-in- Charge :- | |||
| 85 | 85.01 | (a) 15 mm bore | 75 | RM | |
| 86 | 85.02 | (b) 20 mm bore | 50 | RM | |
| 87 | 86 | S&F GI tubing (ISI) marked) medium grade with all fitting and fixed complete to wall ceiling or laid in floors of following sized :- | |||
| 88 | 86.01 | (a) 15 mm bore | 40 | RM | |
| 89 | 86.02 | (b) 20 mm bore | 35 | RM | |
| 90 | 87 | Refixing old steel tubing including cleaning and connections in new or old position (Wall, ceiling, floors etc) of the following size :- | |||
| 91 | 87.01 | (a) 15 mm bore | 35 | RM | |
| 92 | 87.02 | (b) 20 mm bore | 15 | RM | |
| 93 | 88 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. | 65 | RM | |
| 94 | 89 | Hacking out old broken glass of any thickness size,quality or description from any type of frames and S&F 3mm thick sheet glazing in square n.exc 0.5 sqm ordinary quality with glazing clips and oil putty complete as directed by EIC. | 54 | SQM | |
| 95 | 90 | Taking up or down polyethyene - aluminium polyethylene composite pressure pipies and connections of following size all as directed by Engg-in- Charge :- | |||
| 96 | 90.01 | (a) 16 mm outer dia | 115 | RM | |
| 97 | 90.02 | (b) 20 mm outer dia | 100 | RM | |
| 98 | 90.03 | (c) 25 mm outer dia | 40 | RM | |
| 99 | 91 | Supplying & fixing (outside dia 16mm) to walls/chases/ceilings or laying in floors P o l y e t h y l e n e - Aluminium Ployethylene (PE-AL-PE) composite pressure pipes including all Crimp type internal sealing Plansticmetal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work) complete.complete all as specified and directed by Engr-in-charge. | 75 | RM | |
| 100 | 92 | -ditto- as item No 91 but outer dia 20mm. | 60 | RM | |
| 101 | 93 | -ditto- as item NO 91 but outer dia 25mm | 40 | RM | |
| 102 | 94 | Refixing (outside dia 16mm) polyethylene aluminium polyethylene (PE-AL-PE) composite pressure pipe including all crimp type internal sealing plastic metal composite fittings (such as elbows, tees, reducers,etc) complete all as specified and directed by Engr-in-charge. | 40 | RM | |
| 103 | 95 | Refixing (outside dia 20mm) polyethylene aluminium polyethylene (PE-AL-PE) composite pressure pipe including all crimp type internal sealing plastic metal composite fittings (such as elbows, tees, reducers,etc) complete all as specified and directed by Engr-in-charge. | 40 | RM | |
| 104 | 96 | S&F in repair male thread connector, Elbow, Female tee, S.T.Coupler (outside dia 16mm) polyethylene aluminium polyethylene (PE-AL-PE) composite pressure pipe including all crimp type internal sealing plastic metal composite complete all as specified and directed by Engr-in-charge. | 40 | Each | |
| 105 | 97 | S&F in repair male thread connector, Elbow, Female tee, S.T. Coupler (outside dia 20mm) polyethylene aluminium polyethylene (PE-AL-PE) composite pressure pipe including all crimp type internal sealing plastic metal composite complete all as specified and directed by Engr-in-charge. | 40 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
