8136/21-22/E8 Repair/ Maintenance Of Lt Ug Cable And Connected Work Services At Karu Zone-Ii Area Under Ge 860 Ews Repair/ Maintenance Of Lt Ug Cable And Connected Work Services At Karu Zone-Ii Area Under Ge 860 Ews
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Jun 2021
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karu → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
8136 / 21-22 / E8 Repair / Maintenance Of Lt Ug Cable And Connected Work Services At Karu Zone-Ii Area Under Ge 860 Ews Repair / Maintenance Of Lt Ug Cable And Connected Work Services At Karu Zone-Ii Area Under Ge 860 Ews
BOQ
| Name of Work: REPAIR/ MAINTENANCE OF LT UG CABLE AND CONNECTED WORK SERVICES AT KARU ZONE-II AREA UNDER GE 860 EWS. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m depth for laying of cable/ stay assy/LT poles and getting out in hard/dense soil complete all as specified and directed. | 432 | Cum | |
| 2 | 2 | Returning filling incl spreading watering and well ramming in layers not exceeding 25cm in hard and dense soil complete all as specified. | 286.41 | Cum | |
| 3 | 3 | Removing excavated material not exceeding 50 mtrs and depositing where directed at a level n. exc 1.5mtr above the starting point complete all as specified. | 145.59 | Cum | |
| 4 | 4 | Taking out old unserviceable/serviceable un-reinforced concrete PCC cable covers from excavated trench all as directed by the Engineer-in-Charge. \nNote:- Serviceable un-reinforced concrete PCC cable cover kept in safe custody for reuse at site and unserviceable un-reinforced concrete PCC cable cover through in low lying area. | 10666 | Each | |
| 5 | 5 | Laying only un-reinforced pre-cast concrete cable covers, of any size as retrieved from serial item No 04 here-in-before complete all as directed by Engineer-in-Charge. | 1226 | Each | |
| 6 | 6 | M&L for factory made un-reinforced pre cast concrete cable protection cover LV class type - I with size 250mm x 150mm x 40mm laid across the cable (i.e. width of cover along the length of cable) for UG cable protection on the top of the sand cushioning, complete all as specified and directed by Engr-in-Charge. | 9440 | Each | |
| 7 | 7 | Sand cushioning to underground cable complete all as specified in clause 19.75 of SSR Part - I. | 129.6 | Cum | |
| 8 | 8 | S&F of galvanized iron pipe of 50 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road crossing or fixed to wall including painting with two coats of aluminium paint over a coat of red oxide paint, complete all as specified and directed. \nNote : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be inclusive in the item rate. | 43 | RM | |
| 9 | 9 | Taking out old LT under ground cable from trenches / floor / road / wall / pipe / pole of any size and description incl joint, complete all as specified and directed by Engr-in-Charge. | 2000 | RM | |
| 10 | 10 | Supply, laying, testing and commissioning of LT UG cable XLPE insulated PVC sheathed galvanized steel strip armoured electric power cable with stranded aluminium conductor 1100 volts grade 150 sq mm 3.5 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as specified and directed by Engr-in-Charge. \nNote : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. \n2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items. | 200 | RM | |
| 11 | 11 | All as srl item no 10 here-in-before but for cable size of 95 sqmm 3.5 core. | 200 | RM | |
| 12 | 12 | All as srl item no 10 here-in-before but for cable size of 70 sqmm 3.5 core. | 200 | RM | |
| 13 | 13 | All as srl item no 10 here-in-before but for cable size of 50 sqmm 3.5 core. | 200 | RM | |
| 14 | 14 | All as srl item no 10 here-in-before but for cable size of 35 sqmm 3.5 core. | 200 | RM | |
| 15 | 15 | All as srl item no 10 here-in-before but for cable size of 25 sqmm 4 core. | 200 | RM | |
| 16 | 16 | All as srl item no 10 here-in-before but for cable size of 16 sqmm 4 core. | 200 | RM | |
| 17 | 17 | All as srl item no 10 here-in-before but for cable size of 16 sqmm 2 core. | 300 | RM | |
| 18 | 18 | All as srl item no 10 here-in-before but for cable size of 10 sqmm 2 core. | 300 | RM | |
| 19 | 19 | Taking out old UNSV Junction box of any size complete all as specified and directed by Engr-in-Charge. | 11 | Each Job | |
| 20 | 20 | Supply, installation, testing and commissioning, in replacement, Junction box , cubical type, factory made, outdoor type of Size 45cm(l)x30cm(w)x60cm(h) , dust and vermin proof, fabricated out of mild steel sheet not less than 3.15 mm thick, complete with openable shutters in front and rear having proper locking arrangement including including 04 Nos legs made out of angle iron of suitable size and height of each leg shall be grouted in PCC and aluminium bus bar of size 400 Amps capacity , Three phase and neutral bus bar , making hot and cold drilling holes to aluminium bus bar . Junction box shall be spray painted internally and externally with two coats of synthetic enamel paint over a priming coat of red oxide primer and connecting all incomming and outgoing cables with suitable size of Aluminium lugs complete all as specified and as directed by Engineer-in-Charge and comprising of following accessories/fittings :-\n(a) MCCB 4 pole, 160 Amps,240/415 Volt, 50Hz, 10 KA= 01 Nos (I/C) \nb) MCB SPN 63 Amps, 240 Volts - 04 Nos (O/G)\nNote : Unit rate quoted by the contractor here-in-before also includes for fixing and connecting of MCBs and installation of panel on suitable PCC foundation and PCC plat form incl necessary earth and PCC 1:2:4 type B1 work all as per manufacturer instructions and as directed by the Engr-in-Charge. | 7 | Each\nJob | |
| 21 | 21 | Supply, installation, testing and commissioning, in replacement, Junction box , cubical type, factory made, outdoor type of Size 45cm(l)x30cm(w)x60cm(h) , dust and vermin proof, fabricated out of mild steel sheet not less than 3.15 mm thick, complete with openable shutters in front and rear having proper locking arrangement including including 04 Nos legs made out of angle iron of suitable size and height of each leg shall be grouted in PCC and aluminium bus bar of size 400 Amps capacity , Three phase and neutral bus bar , making hot and cold drilling holes to aluminium bus bar . Junction box shall be spray painted internally and externally with two coats of synthetic enamel paint over a priming coat of red oxide primer and connecting all incomming and outgoing cables with suitable size of Aluminium lugs complete all as specified and as directed by Engineer-in-Charge. | 4 | Each\nJob | |
| 22 | 22 | Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanised earth lead wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 40 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 2009 Part-I and connecting to Poles all as specified or indicated including testing on complete all as specified and as directed by Engineer-in-Charge. | 9 | Each\nJob |
AI Tender Summary
Tender Timeline
May 13, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 03, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 05, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender