Goa Shipyard Limited has published Infusion Consumable ( Peel Ply , Resin Flow Mats , Breather Cloth ) ( 1 Set Per Boat ) For Army Patrol Boats ( 12 Nos . ) For Yard 2159-2170 . . Submission Date for this Tender is 31-05-2021. Commercial Marine Vehicle Tenders in Goa Shipyard Limited Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-May-2021 | Date Corrigendum 1 | Date | 24-05-2021 |
| 2 | 24-May-2021 | Date Corrigendum 2 | Date | 27-05-2021 |
| 3 | 27-May-2021 | Date Corrigendum 3 | Date | 31-05-2021 |
| Name of Work: SUPPLY OF INFUSION CONSUMABLE (PEEL PLY, RESIN FLOW MATS, BREATHER CLOTH) FOR 12 NOS. PATROL BOATS (YARD 2159 - 2170) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item code / Make | Total Quantity for 12 PATROL BOATS | Unit of Measurement (UOM) | |
| 1 | 1 | Peel ply: The peel ply should be of Nylon 656 material. Length per roll should be 100m, GSM 83±2, Self separable, should not leave residue, should have good heat resistant & thermally stable, max service temperature 110 Deg C, and should have good adhesion to tack spray. The peel ply should have tracers (red/black/blue colour). | Item 1 | 12 | Roll |
| 2 | 2 | Breather cloth: The material should be non-woven Airweave N10 /equivalent polyester suitable for infusion process. The GSM should be 340. The material should withstand at an exothermic temperature of 110 Deg C. The cloth should have good wrapability. | Item 2 | 3 | Roll |
| 3 | 3 | Resin distribution mesh: The material should be HDPE and should be suitable for Resin exotherm temperature of 110 Deg C. The material should not leave any residue on the substrate post curing of resin. The mesh size should be even and should not be less than 2mm and should not be higher than 3mm. The mesh should be of 160 GSM | Item 3 | 2 | Roll |
| 4 | 4 | Release film with perforation: The release film is to release the non soluble consumables from the part after curing of the structure wherein the release film also should function as resin distribution media to transfer the resin through the holes of the film. The material should be LDPE with high elongation (350 %) and should withstand the processing temperature of 120 Deg C. Per square inch, the film should have 16 to 20 holes of 0.2mm dia evenly distributed across the film. | Item 4 | 2 | Roll |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
