Military Engineer Services-MES has published Upgradation Of Electric System Alongwith Certain Sanctioned Work At Cbs Sarol And Spl Repair / Replacement Of Steel Oh Tank To Smc Panel Water Tank At Dett B Rajouri Under Ge 862 Ews Upgradation Of Electric System Alongwith Certain Sanctioned Work At Cbs . Submission Date for this Tender is 01-06-2021. Electronic Items Tenders in AOR of GE 862 EWS Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-May-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-06-2021 |
| Name of Work:-UPGRADATION OF ELECTRIC SYSTEM ALONGWITH CERTAIN SANCTIONED WORK AT CBS SAROL AND SPL REPAIR / REPLACEMENT OF STEEL OH TANK TO SMC PANEL WATER TANK AT DETT B RAJOURI UNDER GE 862 EWS. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc for shafts, wells,cesspits, man holes, pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth and getting out in any type of soil, complete all as specified. | 394.5 | Cum | |
| 2 | 2 | Description all as per srl item No 02 above but exceeding 1.5mtr and not exceeding 3mtr depth, complete all as specified. | 1 | Cum | |
| 3 | 3 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed. | 222.5 | Cum | |
| 4 | 4 | Removing excavated material (soil) not exceeding 50m and deposition where dircted at a level not exceeding 1.50m above the starting point, all as specified and directed. | 173 | Cum | |
| 5 | 5 | Dry sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed.\nNote:- 1.Dry fine sand of best available quality shall be used.\n2.Punned thickness shall be made and paid. | 113.5 | Cum | |
| 6 | 6 | Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed. | 8.25 | Per\n1000 | |
| 7 | 7 | GI pipe light grade 50 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts etc with fixing clamps of required size, nuts, bolts, washers etc. fixed, complete all as specified. | 20 | RM | |
| 8 | 8 | HT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 11000 volts grade (earthed) of cross sectional area 95 sq mm 3 core including testing, complete all as specified and as directed. | 30 | RM | |
| 9 | 9 | LT XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core including testing, complete all as specified and as directed. | 15 | RM | |
| 10 | 10 | LT XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core including testing, complete all as specified and as directed. | 1350 | RM | |
| 11 | 11 | LT XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core including testing, complete all as specified and as directed. | 250 | RM | |
| 12 | 12 | LT XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core including testing, complete all as specified and as directed. | 270 | RM | |
| 13 | 13 | LT XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core including testing, complete all as specified and as directed. | 240 | RM | |
| 14 | 14 | LT XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core including testing, complete all as specified and as directed.\n(Note for item No-08 to 14:- Earth work, sand cushioning, brick protection and cable jointing kit shall be measured & paid separately)\n | 840 | RM | |
| 15 | 15 | Supply, installation, testing and commissioning of power transformer step down outdoor type, copper wound, 11 KV on HT side at no load 3 phase 50 c/s AC supply of 315 KVA , oil immersed laminated iron core naturally cooled with external cooling tubes, delta connection on both side, corresponding to vector group DYN-11 with neutral brought out separately for earthing, off load, tap changing arrangements up to + / - 7.5 % with a step of + / - 2.5% with HT cable end box on HT side complete on and inc PCC foundation of hight less than 1 mtr with first filling of transformer oil up to appropriate level of desired dielectric strength and complete with standard fittings and accessories confirming to IS-2026 , all as specified in particular specifications and as directed. | 1 | Each | |
| 16 | 16 | Steel tubular poles, swaged type, 410 SP-55, 11m long with 300x300x6mm thick MS base plate continuously welded to pole and MS sheet 2mm thick finial tapper plug welded at top, bolts, nuts and screws all as specified including two coats of black bituminous paint internally throughout and externally for embedded portion and two coats of aluminium paint over a coat of red oxide primer on exposed surfaces including painting up to 1.5 mtr height from ground level or above coping with two coats of synthetic enamel paint in 30cm strip, alternate balck & white starting with block at ground level, complete all as specified and directed.\n(Note:- Excavation and earth work and PCC shall be measured & paid separately) | 2 | Each | |
| 17 | 17 | Cross arms, bracing, supports clamps and back plates, fabricated from structural steel sections incl nuts, bolts, washer, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed incl one primer, one under coat and one finishing coat of aluminium paint with and including preparation of steel surfaces, complete all as specified and directed. | 6.5 | Qtls | |
| 18 | 18 | Supply, installation, connecting electrically & commissioning switch air break, gang operated, triple pole mounted on insulators 12 Nos horizontal type and steel frame with operating mechanism in worked from ground level, for current rating upto 200 amps and working voltage 11000 volts complete all as specified and directed. | 1 | Each | |
| 19 | 19 | Expulsion fuse single pole, for current rating upto 25 amps and working voltage 11000 volts, complete all as specified. | 3 | Each | |
| 20 | 20 | Lightning arresters for HT expulsion type complete with all fittings, transmission class, discharge capacity 65 kilo amp and working voltage 11000 volts, complete all as specified. | 1 | Set of three | |
| 21 | 21 | Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for HT 25x20cm size, complete all as specified. | 4 | Each | |
| 22 | 22 | Anti climbing devices; comprising 2.24mm dia galvanised steel 2-strand barbed wire with 2.00mm dia barbs wrapped spirally round poles, to a length of 0.5 to 1.0 metre clamped and properly secured or as ordered (clamps shall be measured separately) complete all as specified. | 0.2 | Kgs | |
| 23 | 23 | Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm, complete all as specified | 2 | Each | |
| 24 | 24 | Steel tubular poles, swaged type, 410-SP-31, 9m long with 300x300x6mm thick MS base plate continuously welded to pole and MS sheet 2mm thick finial tapper plug welded at top, bolts, nuts and screws all as specified including two coats of black bituminous paint internally throughout and externally for embedded portion and two coats of aluminium paint over a coat of red oxide primer on exposed surfaces including painting up to 1.5 mtr height from ground level or above coping with two coats of synthetic enamel paint in 30cm strip, alternate balck & white starting with block at ground level, complete all as specified and directed.\n(Note:- Excavation and earth work and PCC shall be measured & paid separately) | 20 | Each | |
| 25 | 25 | LED street light fittings 45 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK07 complete with hosing with all accessories pre wired and making connection with 3 core copper flexible cable of 1.5sqmm size to light fitting, complete all as specified and directed. Make:-Havells Cat Part No:-ENDURAPEARLNEOSL45WLED757PASYTOPC or Equivalent cat part of make as specified in Appx 'E' here in after. | 20 | Each | |
| 26 | 26 | SMC Junction Box of size 200cm x 140cm x 95 cm factory made powder coated consisting of Aluminum bus bar of size 20 x 3 mm - 04 Nos and MCB SP 10 Amps- 01 No with & including fixing arrangement to poles, complete all as specified and directed. | 20 | Each | |
| 27 | 27 | GI pipe street light bracket light grade 32mm bore 1.2mtr long bent to shape as directed with two number of flat iron clamps made out of mild steel flat iron 40x6mm with 16mm dia bolts with nuts and washers fixed on steel pole / PCC pole / wall duly painted with two coats of aluminium paints, complete all as specified and directed. | 26 | Each | |
| 28 | 28 | Supply, installing, testing and commissioning of LT distribution panel board Factory Made, cubical, out door type, powder coated with fabricated 3.15 mm thick CRCA sheet with angle iron / flat iron frame work, bus Bar chamber, front openable hinged door with locking arrangement and common openable hinged door from rear side, floor mouting type, IP-65 protection and as per IS, comprising the following accessories ,including connecting with the incoming / out going feeders by providing cable glands and cable lugs complete including taking down old unserviceable LT panels, complete all as specified and comprisinf as under:-\n(a) INCOMING:-\n(i) Rectangular bus bar 200 amps of Copper strip of size 50x5mm fixed on insulated mounting arrangement-04 Nos. \n(ii) MCCB 100 Amps FP 25 KA, 415 volts , Make:C&S/Havells/ L&T- 1 No\n(iii) Ammeter Digital type 0 to 250 A - 1 No\n(iv) Voltmeter Digital type 0-500 V - 1 No\n(v) Three way selector switch - 1 No\n(vi) Phase indicating light LED type - 1 set.\n ....... contd to item No-28.01 | 5 | Each | |
| 29 | 28.01 | (b) OUTGOING:-\n(i) MCCB 63 Amps FP 25 KA, 415 volts, Make:C&S/Havells/ L&T- 2 Nos\n(ii) SPN MCB of 10 KA 32 Amp-02 Nos | |||
| 30 | 29 | Supply, installation, testing and commissioning of Servo Voltage stabilizer (Outdoor type) for automatic operation Three phase naturally oil cooled indoor type & designed for input varition between 300 v to 480 v with output voltage stabilized at 415 V with accuracy ±2.5% and speed of correction 8 volts per second and of capacity 300 KVA including first filling of transformer oil as per manufacturer recommendation, complete all as specified and directed. \nNote:- Servo voltage stabilizer shall be copper wounded. | 1 | Each | |
| 31 | 30 | Supply and fixing factory made out door type LT Panel totally enclose and both side opening with locking arrangement of suitable size 415V 3 phase 4 wire having 600 Amp electrolytic Aluminium bus bar made out of fabrication of 3.15mm CRCA sheet thicknes duly powder coated with enamelled paint over a one coat of red oxide primer and varnishing water proof and suitable for fixing of following complete PCC work by providing 60 cm long angle iron of size 50x50x6mm above ground level welded on all the fuse corners duly comprising of the followings :- \n INCOMMING :-\n(a) MCCB 630Amp Four Pole 36KA, 415 volts.-01 No \n(b) Ammeter Digital type(0-100A) - 01 No\n(c) Voltmeter Digital type(0-500V) - 01 No\n(d) CT's - 03 Nos\n(e) Indicating lamp LED type - 03 Nos\nOUTGOING :-\n(a) MCCB 400Amp four Pole 36KA, 415 volts.-01 No \n(b) MCCB 250Amp four Pole 25KA, 415 volts.-02 No\n(c) MCCB 160Amp four Pole 25KA, 415 volts.-02 No\n | 1 | Each | |
| 32 | 31 | Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron earth lead strip 32x6mm by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 40mm bore including GI medium grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 8mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including testing on completion, complete all as specified and directed.\nNote No:- Please note that rate for Earth strip and GI protection pipe upto 7.5 m are inclussived in the rate to be quoted by the contractor against this item. | 12 | Each | |
| 33 | 32 | Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 8mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed.\nNote No:- Please note that rate for Earth wire and GI protection pipe upto 7.5 m are inclussived in the rate to be quoted by the contractor against this item.\n | 6 | Each | |
| 34 | 33 | Earth continuity conductor or main earth lead from earth plate to equipment fixed to pole, on wall on battern or chases or buried in ground or drawn in pipe etc or any other indicated situation with GI strip of size of 32x6mm, complete all as specified. | 10 | RM | |
| 35 | 34 | Rubber mat of 2 mtr x 1 mtr x 19 mm, complete all as specified and directed. | 2 | Each | |
| 36 | 35 | Cable path indicator for LT cable, made out of CI circular shape 150 mm dia 10 mm thick with engraving of type and size of cable, fixed on and including angle iron frame of 40 X 40 X 6 mm, 500 mm long fixed above ground level and embedded in PCC 1:3;6 type C1 concrete block of size 150 X 150 X 200 mm including necessary erthwork in any type of strata complete all as specified and directed \nNote : The painting of path indicator pole will be 'BLUE' in colour & all as directed. | 30 | Each | |
| 37 | 36 | Cable path indicator for HT cable, made out of CI circular shape 150 mm dia 10 mm thick with engraving of type and size of cable, fixed on and including angle iron frame of 40 X 40 X 6 mm, 500 mm long fixed above ground level and embedded in PCC 1:3;6 type C1 concrete block of size 150 X 150 X 200 mm including necessary earthwork in any type of strata complete all as specified and directed \nNote : The painting of path indicator pole will be 'RED' in colour & all as directed. | 6 | Each | |
| 38 | 37 | Service cable 4 Sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections/perimeter light flat or circular for connection of street light from junction box drawn in and including medium grade ISI marked non metalic rigid PVC conduit as per site requirement, complete all as specified and directed. \n | 640 | RM | |
| 39 | 38 | Cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in sub bade to poles foundation / Struts and mass concrete, all as specified directed. | 1 | Cum | |
| 40 | 39 | PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as foundation of poles / stay assembly and as in floor complete all as specified directed. | 11 | Cum | |
| 41 | 40 | Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in copping of pole with and including necessary form work, complete all as specified. | 0.5 | CUM | |
| 42 | 41 | Dismantling of ACSR conductors of any size/type, complete all as specified and directed. | 3 | Qtls | |
| 43 | 42 | LED street light fittings 70 Watt made up of pressure die cast aluminium housing with high power LED as lighting source with toughened glass with IP66 protection and impact resistance of IK07complete with hosing with all accessories pre wired and making connection with 3 core copper flexible cable of 1.5sqmm size to light fitting, complete all as specified and directed. Make:-Havells Cat Part No:-ENDURACITYLINERNEOSL70WLED757PASYBOTG or Equivalent cat part of make as specified in Appx 'E' here in after. | 6 | Each | |
| 44 | 43 | GI pipe light grade 80 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts etc with fixing clamps of required size, nuts, bolts, washers etc. fixed, complete all as specified. | 20 | RM | |
| 45 | 44 | Supply, installing, testing and commissioning of LT distribution panel board Factory Made, cubical, out door type, powder coated with fabricated 3.15 mm thick CRCA sheet with angle iron / flat iron frame work, bus Bar chamber, front openable hinged door with locking arrangement and common openable hinged door from rear side, floor mouting type, IP-65 protection and as per IS, comprising the following accessories ,including connecting with the incoming / out going feeders by providing cable glands and cable lugs complete including taking down old unserviceable LT panels, complete all as specified and comprisinf as under:-\n(a) INCOMING:-\n(i) Rectangular bus bar 200 amps of Copper strip of size 50x5mm fixed on insulated mounting arrangement-04 Nos. \n(ii) MCCB 160 Amps FP 36 KA, 415 volts adjustable type, Make:C&S/Havells/ L&T- 1 No\n(iii) Ammeter digital type 0 to 500 A - 1 No\n(iv) Voltmeter digital type 0-500 V - 1 No\n(v) Three way selector switch - 1 No\n(vi) Phase indicating light LED type - 1 set.\n ....contd 44.01 | 1 | Each | |
| 46 | 44.01 | (b) OUTGOING:-\n(i) MCCB 63 Amps FP 36 KA, 415 volts, Make:C&S/Havells/ L&T- 2 Nos\n(ii) SPN MCB of 10 KA 32 Amp, 10KA-01 No | |||
| 47 | 45 | Street light terminal/junction box factory made double door powder coated with hinges and doors with locking arrangement of suitable size complete housed in and including of 4 Nos of amluninium bus bar of 63 Amp suitable length fixed on porcelain insulator with proper size of screw and one No. MCB SP 10 Amps, 240 V, including in and out going cable gland for 25 sq mm cable complete all as specified and directed. | 6 | Each | |
| 48 | 46 | Supply, installation, testing and commissioning of servo voltage stabilizer minimum three star rated as per BEE norms for automatic operation servo controlled, three phase naturally oil cooled indoor type and designed for input variation between 300v to 480v with output voltage stabilizer at 415V with accuracy +/- 2.50% and speed of correction 8 volts per second of capacity 50 KVA including first filling of transformer oil as per manufacturer recommendation complete all as specified and directed.\nNote:- Servo voltage stabilizer shall be copper wounded. | 1 | Each | |
| 49 | 47 | Taking down of existing Steel OH Tank after disconnection GI water tubing and connection any position including removal from site and deposit to at E/M Store, complete all as specified and directed. | 2 | Each | |
| 50 | 48 | Supply & fixing of sintex SMC panel tank capacity 50000Ltr square type, made out of HOT PRESS MOULDED SHEET MOULDING COMPOUND panels of size 1005mm x 1005mm x 75mm (flange), 1005mm x 2010mm x 75mm (flange) and 1005mm x 502mm x (flange) the flange should be perpendicular to the main surface. The shape should be Trunked type for extra strength and 90 degree flanges pre drilled for bolting. All the Flanges of the 1 mt Panel should have 13 Nos. holes per side for fastening/joining the panels to one another. Hot Pressed Moulded SMC Pre Drilled Corner Pieces with built-in ribs of the size 75mm x 75mm should be provided for 90 degree joints of tanks wall to roof joints complete with olive green nuts, bolts and washers. Special sealent having excellent UV Resistance as well as suitable for portable water, complete with top covered construction having man hole with cover dia 600mm and internal FRP Ladder. The SMC Panel must be ISI marked meeteing BIS 14399(part 1 & 2). Tank inlet and outlet size 80mm dia for connection of GI pipe all as specified and directed.(Make - Sintex or equivalent make as approved by GE) | 2 | Each | |
| 51 | 49 | Steel water tubing 80mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceiling or laid in floors/trenches fixed in repairs, complete all as specified. | 36 | RM | |
| 52 | 50 | Sluice valve cast iron of size 80mm dia ISI Marked with flanged ends drilled with gun metal spindle and cast iron wheel with shut and open casted on it, class PN-1.6 confirming to IS:14846-2000 including necessary fixing arrangement such as rubber insulation, packing rings, jointing materials nuts, bolts, washers gaskets and packing materials, etc of suitable size including testing complete all as specified and as directed by Engr-in-Charge. | 2 | Each | |
| 53 | 51 | Construction of valve pit brick masonary, internal size 1200X1200X1200mm (from top of PCC to bottom of cover) including excavation in any type of soil, returning, filling in around foundation, removal of surplus soil to a distance not exceeding 50m, PCC 1:4:8 type D-2 in foundation 100mm thick, brick work in CM 1:4, 15mm thick plaster in CM 1:4 to internal surfaces and flush pointed externally as the work proceeds in the same mortar, PCC coping 80mm thick 1:2:4 type B-0 using 12.5mm graded stone aggregate, pit cover of MS black sheet 3.15mm thick with locking arrangement handle, fixing arrangement and painting to steel sufaces with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. | 2 | Each | |
| 54 | 52 | Mild steel work in Framed work such as grills, gratings, MS Sheets, Angles etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including taking down old unsv mild steel work, complete all as specified and directed. | 180 | Kgs |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
