| 1 | 1 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. \n63 mm dia (OD-63 mm & ID-51 mm nominal) | item1 | 350 | Meter |
|---|
| 2 | 2 | Supply of 3.5 Core x 25 Sqmm XLPE armoured Aluminum conductor 1100 volt grade armoured LT UG cable as per CPWD. | item2 | 200 | Meter |
|---|
| 3 | 3 | Supply of 4 Core x 16 Sqmm XLPE armoured Aluminum conductor 1100 volt grade armoured LT UG cable as per CPWD. | item3 | 200 | Meter |
|---|
| 4 | 4 | S/I/T/C/Supply, Installation, testing and commissioning of 40W LED decorative bollard made of aluminum casting with spun aluminum top. The top head should be at least 335mm wide to match the light levels as approved by engineer in charge. Height should be 1100mm with polycarbonate unbreakable diffuser with mechanical impact protection of IK10 and rated as dust protection as IP66. The fixture should be PU painted and weight of the luminaries should not be less than 10.5Kgs. The efficacy of the LEDs should be greater than 100 lumen per watt and should be powered with at least 3KV surge protection driver. The fixture must have an external surge protection device of 10KV, Input Voltage- AC 240 Volts, Mandatory certifications – BIS for complete product in the name of lighting company. Bollard light of approved make and model approved by engineering in charge | item4 | 20 | Each |
|---|
| 5 | 5 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.\n4 X 16 sq. mm (28mm) | item5 | 4 | Each |
|---|
| 6 | 6 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.\n3.5 X 25 sq. mm (22 mm) | item6 | 4 | Each |
|---|
| 7 | 7 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.\nUpto 35 sq. mm | item7 | 350 | Meter |
|---|
| 8 | 8 | Design and Fabrication ,Supply,erection,testing and commissioning of outdoor double door type metal clad weather proof branch feeder pillar of suitable size along with cable alley with double door and inbuilt locking arrangement made of 2. mm mild steel sheet to acoomodate the following capacity of switch gear including angle iron legs made of 40mm x 40mm x 6 mm, footing hight 750 mm for suitable height ,neoprene rubber gaskets,bakelite knobs ,powder coated rust free Silver painting of approved shade and of approved quality ,making connection ,interconnection with appropiate size of cooper conductor cable with colour codeing sleevs,copper thimbling ,end termination glands of suitable size ,earthing connection etc...,complete as required.I/C providing fixing ,testing and commisioing of following with CPRI Approved, with following specification all as directed by engineering incharge.\n32 A TPN MCCB.25KA (Each 01)\nDigital Voltmeter and Ammeter( Set 01) for all phase\nSP MCB 10 Amp For Light Circuit Qty (6 nos) with proper input and Output \n4 strip insulated aluminium conductor bus bar 100 amp capacity (set 01)\nLED indicating lamp RYB (set 01)\n Automatic switching On & OFF of bollard lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. with 32 Amp power contactor | item8 | 1 | Set |
|---|
| 9 | 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.\n1.5.10 (1 Cement : 5 coarse sand (Zone -lll) 10 graded stone aggregate 40 mm nominal size) | item9 | 1 | cum |
|---|
| 10 | 10 | Brick work in foundation & plinth with modular bricks of class designation 7.5 in foundation and plinth in.\nCement mortar 1:6 (1 cement : 6 coarse sand) | item10 | 1.9 | cum |
|---|
| 11 | 11 | 12 mm cement plaster of mix\n1:6 (1 cement: 6 fine sand) | item11 | 16.5 | sqm |
|---|
