Military Engineer Services-MES has published Special Repair/Replacement Of Ber Motors Of E/M Installation At Nagrota Mil Stn And Provn Of Defi Geysers , Water Cooler ( 150 Ltr ) , Desert Coolers And Ceiling Fans For 213 Transit Camp Under Ge Nagrota . . Submission Date for this Tender is 09-06-2021. Air Cooler Tenders in NAGROTA AND JAMMU Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 31-May-2021 | CORRIGENDUM NO.01 | Other | 02-06-2021 |
2 | 02-Jun-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-06-2021 |
Name of Work:REPAIR/REPLACEMENT OF BER MOTORS OF E/M INSTALLATION AT NAGROTA MIL STN AND PROVN OF DEFI GEYSERS, WATER COOLER(150 LTR), DESERT COOLERS AND CEILING FANS FOR 213 TRANSIT CAMP UNDER GE NAGROTA. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly, complete all as specified and directed for the following:- | |||
2 | 1.01 | (a) One light point controlled by one switch 5 Amp. | 102 | Per point | |
3 | 1.02 | (b) One socket outlet 5 Amp controlled by one switch on independent board. | 30 | Per point | |
4 | 2 | All as per item No 01 here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15 Amp switch on independat board. | 5 | Per point | |
5 | 3 | S&F switch piano flush type 5 Amps single pole one way, complete all as specified and directed. | 132 | Each | |
6 | 4 | S&F switch piano flush type 15 Amps single pole one way, complete all as specified and directed. | 15 | Each | |
7 | 5 | S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type, complete all as specified and directed. | 15 | Each | |
8 | 6 | S&F switch socket combination 2 in 1 5 pin 5 /15 Amps flush type, complete all as specified and directed. | 30 | Each | |
9 | 7 | S&F of ceiling rose surface type 65 mm x 50 mm 2 to 3 terminal, complete all as specified and directed. | 102 | Each | |
10 | 8 | S&F Step type, 5 speed, fan regulator, 230 volts, single 50 HZ, AC, complete all as specified and directed by Engr-in-Charge. | 102 | Each | |
11 | 9 | Supply and install, desert cooler, AC, electric driven (single phase), 1400 rpm,having nominal air flow capacity of 5000 Cum/ hour complete with steel body, top and bottom cover made out of 24 guage MS sheet and side wall made out 22 guage MS sheet, complete all as specified and directed by Engr-in-Charge. | 40 | Each | |
12 | 10 | Supply & fix Ceiling Fan, 1400 mm sweep , 230 Volts AC supply Elecric driven single phase with all accessories including 3 core 1 sqmm electrical connecting wire from ceiling rose to fan connector, complete all as specified and directed by Engr-in-Charge. | 300 | Each | |
13 | 11 | M& L for framed work such as angle iron stand for desert cooler with ends of bars / angle iron shouldered/ riveted / forged into spikes / welded including two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge. | 240 | Kg | |
14 | 12 | S & F MS fan hooks with supports, clamps, and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shape or size including painting with two coats of aluminium paint over a coat of red oxide, complete all as specified and directed by Engr-in-Charge. | 125 | Kg | |
15 | 13 | S & F 50mm dia GI Pipe, light grade, with all fittings and fixed complete to walls and ceiling for hanging to ceiling fans, complete all as specified and directed by Engr-in-Charge. | 15 | RM | |
16 | 14 | Supplying, Installing ,testing and commisioning of stationary water heater (Geyser) Vertical storage type, electric driven,closed vented type (Star Marked), Inner container made of stainless steel of capacity 25 ltr, 1500 W, Pressure rating 60 N/Sqcm,class-I, 5 star including all fixing accessories such as nut,bolts,washers, NRV (Non return valve), complete all as specified and directed by Engr-in-Charge. | 15 | Each | |
17 | 15 | S & F water cooler electric driven (Single phase), partially stainless steel having approximate storage capacity of 180 Ltrs and nominal cooling capacity of 150 Ltrs /Hrs including all accessories, complete all as specified and directed. | 3 | Each | |
18 | 16 | Supply & installation of 2 KVA Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity , complete all as specified and directed by Engr-in-Charge. | 3 | Each | |
19 | 17 | S&F 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engr-in-Charge. | 15 | Each | |
20 | 18 | S&F 15mm bore stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle.screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engr-in-Charge. | 15 | Each | |
21 | 19 | S&F of PVC connection of 15 mm dia, 60 cm long with 02 Nos of unions and washers suitable for ordinary intake of water, complete all as specified and directed by Engr-in-Charge. | 15 | Each | |
22 | 20 | S&F of PVC connection of 15 mm dia, 60 cm long with 02 Nos of unions and washers with steel reinforcement material suitable for hot water supply, complete all as specified and directed by Engr-in-Charge. | 15 | Each | |
23 | 21 | Cutting and screwing existing G.I tubing of 15 mm for alterations or additions on pipe for conectors (Each cut measured), complete all as specified and directed by Engr-in-Charge. | 18 | Each | |
24 | 22 | S&F 15 mm bore steel water tubing 'medium grade' galvanised with all fitting (i.e. Tee, socket, bend etd) complete to walls and ceilings or laid in floors, complete all as specified and directed by Engr-in-Charge. | 40 | RM | |
25 | 23 | S & F 20mm bore steel water tubing 'medium grade' galvanised with all fitting and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed by Engr-in-Charge. | 20 | RM | |
26 | 24 | Supply and fixing Submersible Pump set 30 HP of capacity to discharge water 2400,LPM and Discharge Head 44 Mtr capacity having cast iron casing volute type high tensile steel shaft,bronze impller dynamically balanced 2940 RPM ,Gl and Packed ,Stage -3 , Shaft Sleeves , Suction Dia 100 mm Discharge Dia 100 mm with standard fitting and accessories like pressure gauge-01 Nos ,Air Release Valve 01 Nos etc. directly coupled through flexible type coupling with air cooled squirrel cage induction motor suitable capacity with F class insulation mounted on comonbase plate,MS Chassi fabricated to required length strength and shape supported on PCC foundation as per manufacture instruction complete \nNote : Rate of Taking Down of Motors/Pumps with the help of crane/man power and shifted to AGE E&M Store are included in above items . | 1 | Each | |
27 | 25 | Supply and Fixng Multi Stage Pump 30 HP of capacity to discharge water 1000 LPM at a suction head of 05 Mtr and Discharge Head 80 Mtr capacity having cast iron casing volute type high tensile steel shaft,bronze impller dynamically balanced 2940 RPM Shaft Sleeves , Suction Dia 80mm Discharge Dia 80mm with standard fitting and accessories like pressure gauge-01 Nos ,Air Release Valve 01 Nos etc. directly coupled through flexible type coupling with air cooled squirrel cage induction motor suitable capacity with F class insulation mounted on comonbase plate,MS Chassi fabricated to required length strength and shape supported on PCC foundation as per manufacture instruction complete \nNote : Rate of Taking Down of Motors/Pumps with the help of crane/man power and shifted to AGE E&M Store are included in above items . | 2 | Each | |
28 | 26 | M&L for earthing complete with GI steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to GI strip 25 mm x 4 mm by means of bolts, nuts, check nuts and washers of GI or steel including necessary earth work and excavation of in any type of strata, PCC 1:3:6 type C-2 GI tubing 40 mm dia for protection of strip etc all as per electrical plate No.5 of SSR part I including connecting to electrical equipments and testing on completion. | 6 | Each | |
29 | 27 | Material and labour for heavy duty sluice valve 100 mm dia complete with iron wheel conforming to IS 1969 PN 1.6 double flanged and drilled end provided with high tensile steel spindle including CI flanged Bolts/Nuts/washers gasket etc and removal of old valve complete all as specified and directed | 2 | Each | |
30 | 28 | Material and labour for heavy duty sluice valve 80 mm dia complete with iron wheel conforming to IS 1969 , PN 1.6 double flanged and drilled end provided with high tensile steel spindle including CI flanged Bolts/Nuts/washers gasket etc and removal of old valve complete all as specified and directed. | 4 | Each | |
31 | 29 | Supply and fix Non Return Valve for 100 mm dia , PN 1.6 with all fittings such as elbow, bends, sockets, nipples and union etc and removal of old valve complete all as specified and directed by Engr-in-charge. | 2 | Each | |
32 | 30 | Supply and fix Non Return Valve for 80 mm dia , PN 1.6 with all fittings such as elbow, bends, sockets, nipples and union etc and removal of old valve complete all as specified and directed by Engr-in-charge. | 4 | Each | |
33 | 31 | Supply and fix Foot Valve for 80 mm dia , PN 1.6 with all fittings such as elbow, bends, sockets, nipples and union etc and removal of old valve complete all as specified and directed by Engr-in-charge | 2 | Each | |
34 | 32 | Supply and laying GI pipes of 100 mm dia with spigot and socket ends centrifugally cast class LA in any length, laid in treanches and wall including taking down of existing old pipe complete all as per specified and directed by Engineer in charge. | 150 | RM | |
35 | 33 | Supply and laying GI pipes of 80 mm dia with spigot and socket ends centrifugally cast class LA in any length, laid in treanches and wall including taking down of existing old pipe complete all as per specified and directed by Engineer in charge. | 60 | RM | |
36 | 34 | Excavation in trenches in any type of soil not exc 1.5m wide and n.exc 1.5m in depth for GI pipe and getting out, complete all as specified and directed.. | 115 | CUM | |
37 | 35 | Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm in hard dense soil completge all as specifiedd and directed by Engineer-in-Charge. | 103 | CUM | |
38 | 36 | Removing excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge. | 12 | CUM | |
39 | 37 | M&L of Header plateforms /motor plateform up to size of 2.50 m x 2.50m x 1.20m with following specifications as under \na)brick work in sub class B brick old size burnt clay bricks exc 6m mean radius on plan in cement mortar 1:4 complete all as spd and directed \nb) PCC 1:3:6 as in foundation filling and mass concrete\nc) Stone boulder filling n.exc 63mm including hand packing and ramming complete\nd) PCC 1:2 :4 as in flooring / top surface of plate form complete\ne) 15 mm thick plastering on brick surface in CM 1:4 complete \nNote : Ecxcavation up to level of exsisting suction pipe line included in above rate | 3 | Each Job | |
40 | 38 | Supply, installation and commissioning and testing of LT panel cubical type suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, floor mounted, outdoor type factory fabricated duly powder coated inside and out side, outer cover made out of 3mm thick CRCA sheet, internal cover and partition made out of 2 mm thick CRCA sheet with angle iron 50 mm x 50 mm x 6mm covered from all side with front and back openable, weather proof including suitable rating aluminium bus bar for 3 phase 4 wire system, wiring with suitable size copper cable and embeded in brickwork in CM 1:4 not less than 60cm above ground level with suitable foundation for fixing panel of required size in ground with nuts, bolts and washer etc. complete comprising of following including taking out the old unserviceable panel complete all as specified and directed by Engineer-in-Charge\n | 2 | Each | |
41 | 38.01 | Incoming\n(a) MCCB 100 Amp 4 pole 16 KA I415 volts AC,Fixed Thermal and Fixed Magnetic with Ics = 100 % og Icu - 01 Nos\n(b) Aluminium bus bar 300 Amp TPN - 01 Set\n(c) Digital voltmeter 0-500 volts with selector switch - 01 Nos\n(d) Digital Amp meter 0-500 Amp with selector switch & CT - 01 Nos\n(e) Indicator lamp LBD type (R, Y, B) complete with bakalite fuse fitting - 01 Set\nOutgoing\n(a) MCCB 4 pole, 63 Amp, 10 KA, 415 voltsFixed Thermal and Fixed Magnetic with Ics = 100 % og Icu - 02 Nos\n(b) MCCB 4 pole, 63 Amp, 16 KA, 415 volts AC- 01 Nos\n(c) Star Delta Starter for 30 HP Motors ,22 KW 415 V 50 HZ,40 Amps, ML-2 ,\n Relay Scale 20-32 Amps, -02 Nos\nd) Single Phase Preventor -02 Nos | |||
42 | 39 | Supply and laying of submersible cable un armored PVC insulated & sheathed copper conductor cable 1100 Volts grade of size 35 Sqmm 3 core complete all as specified and directed. | 15 | RM | |
43 | 40 | Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with Copper conductor LT 1100 V grade cross sectional area 35 Sqmm 3.5 core, complete all as specified and directed by Engineer-in-Charge.\n | 10 | RM | |
44 | 41 | Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs. 28,525.00 during AOC\nNote:- Tenderers shall not quote for this Schedule |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail