Employees State Insurance Corporation-ESIC has published Special Electrical Works In Esi Hospital At Thottada , Kannur Special Electrical Works And Replacement Of Medium Voltage Power Distribution Panel Board In Esi Hospital At Thottada , Kannur. Submission Date for this Tender is 19-05-2021. Electrical Maintenance Tenders in Thottada, Kannur Kerala. Bidders can get complete Tender details and download the document.
| Name of Work:-Special Electrical works & Replacement of Medium Voltage Power distribution Panel Board in ESI Hospital at Thottada, Kannur | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply ,Installation, testing & commissioning (including minor Civil Works) of cubicle type Indoor Panel suitable for 415V, 3 phase, 4 wire 50 Hz AC supply system fabricated in compartmentalised design from CRCA Sheet steel of 2mm thick for frame work with size of 155cm x 30cm x 185 cm and covers i/c cleaning and finishing complete with powder coating in approved shade with dust and vermin proof, having 400 amps capacity TPN tinned aluminium bus bar of high conductivity, DMC/SMC bus bar supports, control wiring with 2.5 sq.mm. FRLS PVC Insulated copper conductor single core cable, cable alleys, cable gland plates in half, MV danger notice board i/c providing following switch gears complete as per the directions of engineer-in charge. | |||
| 2 | 1.01 | INCOMING | |||
| 3 | 1.02 | a) 250 Amps, 36KA 415 Volts,50Hz, 4 pole MCCB with thermal-magnetic based releases for over load & short circuit, extended rotary handle etc. – 1 No. | |||
| 4 | 1.03 | b) RYB Phase indicating LED lamps with 6ASP MCB protection, Digital VAF meters,CT's- 1 Set. | |||
| 5 | 1.04 | BUS BARS | |||
| 6 | 1.05 | TPN Aluminium bus bars of 400 Amps capacity with heat shrinkable coloured sleeves, DMC /SMC bus bar supports at required intervals complete for cross section, size supports and their spacing etc. as per the directions of engineer-in charge. | |||
| 7 | 1.06 | OUTGOINGS | |||
| 8 | 1.07 | a) 125 Amps, 36KA 415 Volts, 50Hz, 4 pole MCCB with thermal-magnetic based release for over load & short circuit release, extended rotary handle etc. – 1 No, | |||
| 9 | 1.08 | b) 100 Amps, 30KA 415 Volts, 50Hz, 4 pole MCCB with thermal-magnetic based release for over load & short circuit release, extended rotary handle etc. – 1 No. | |||
| 10 | 1.09 | c) 63 Amps, 30KA 415 Volts, 50Hz, 4 pole MCCB with thermal-magnetic based release for over load & short circuit release, extended rotary handle etc. – 9 Nos. | |||
| 11 | 1.1 | Panel complete as above | Item 001 | 1 | Each |
| 12 | 2 | Supplying and fixing of 4 way (4 + 12), Double door , Vertical type three pole and neutral, sheet steel, MCCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCCB/MCB/Isolator) | Item 002 | 2 | Each |
| 13 | 3 | Supplying and fixing of 8 way (4 + 24), Double door , Vertical type three pole and neutral, sheet steel, MCCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCCB/MCB/Isolator) | Item 003 | 1 | Each |
| 14 | 4 | Supplying and fixing of 63A 4 pole MCCB 16 KA Incomer complete all as specified and as per the directions of engineer-in charge. | Item 004 | 2 | Each |
| 15 | 5 | Supplying and fixing of 100A 4 pole MCCB 16 KA Incomer complete all as specified and as per the directions of engineer-in charge. | Item 005 | 1 | Each |
| 16 | 6 | Supplying and fixing of 35 sqmmx3.5 core PVC insulated and PVC sheathed XLPE power Aluminium armoured cable of 1.1 KV grade | Item 006 | 45 | Metre |
| 17 | 7 | Supplying and fixing of 50 sqmmx3.5 core PVC insulated and PVC sheathed XLPE power Aluminium armoured cable of 1.1 KV grade | Item 007 | 30 | Metre |
| 18 | 8 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. | |||
| 19 | 8.1 | Single pole | Item 008 | 15 | Each |
| 20 | 8.2 | Triple pole and neutral | Item 009 | 9 | Each |
| 21 | 9 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(Both sides of cable) | |||
| 22 | 9.1 | 3½ X 35 sq. mm (32mm) | Item 010 | 1 | Set |
| 23 | 9.2 | 3½ X 50 sq. mm (35mm) | Item 011 | 1 | Set |
| 24 | 10 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required | Item 012 | 4 | set |
| 25 | 11 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required | Item 013 | 20 | Metre |
| 26 | 12 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring cable as required. | Item 014 | 30 | Metre |
| 27 | 13 | Dismantling & removing old existing MV panel, restoring the finish and other miscellaneous work.etc | Item 015 | 1 | L.S. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
