Construction Of Cycle And Scooter Stand At The Premises Of Fire Service Head Quarter Complex, Fire Service Chowmuhani, Agartala
Tender Value
4.36 Lakhs
Estimated cost
Bid Submission
01 Jun 2021
0 days left
EMD
4362
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Fire Service Chowmuhani, Agartala,Tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Cycle And Scooter Stand At The Premises Of Fire Service Head Quarter Complex, Fire Service Chowmuhani, Agartala
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width as well as 10 sqm on plan) including dressing of sides ramming of bottons,lift upto 1.5m,including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50m. -All kinds of soil. |
| 2 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering -A) All work upto plinth level: i) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) |
| 3 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering -A) All work upto plinth level: i) 1:1½:3 (1 Cement:1½fine sand:3 graded stone aggregate 20mm nominal size) |
| 4 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. i) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 5 | Centering Shuttering including struttings,propping etc.and removal of form work for: i)Foundations,footings,bases for columns etc.for mass concrete with timber plank |
| 6 | Steel work in built up tabular (round,square or ractangular hollow tubes etc.) trusses etc.,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer,icluding welding and bolted with special shaped washers etc.complete. i) Hot finished welded type tubes |
| 7 | Supply & installation of pre-painted Galvalume sheets roofing/cladding(size,shape and pitch of corrugation as approved by Engineer-in-charge)in 550mpa steel grade,made out of cold rolled steel coatedwith zinc-Aluminium alloy coating of 43.5% Zn,55% AI and 1.5% Silicon confirming to ASTM A792/A792M and AS1397,Alloy coating AZ150/AZ70,colour coated with high quality polyester coating,top coated of modified polyster of 20 micron,back side coat of 5 micron,having epoxy primer coat of 5 micron on both side.Sheet should have protective guard flim of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 meter or as desired by Engineer-in-charge.The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x 55 mm)with EPDM washers filled with white lead complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required. i) 0.50mm thickness. |
| 8 | Supply & installation of pre-painted Galvalume sheets roofing accessories in 550mpa steel grade,made out of cold rolled steel coatedwith zinc-Aluminium alloy coating of 43.5% Zn,55% AI and 1.5% Silicon confirming to ASTM A792/A792M and AS1397,Alloy coating AZ150/AZ70,colour coated with high quality polyester coating,top coated of modified polyster of 20 micron,back side coat of 5 micron,having epoxy primer coat of 5 micron on both side.Sheet should have protective guard flim of 25 microns minimum to avoid scratches while transportation.The sheet shall be fixed using self drilling/self tapping screws of size with EPDM washers complete for Ridges/Valley/Gutter/ Flashing of width 610mm: i) 0.50mm thickness |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of test certificate issued by the manufacture]: i) two or more coats on new work |
| 10 | Demolishing reinforced cement concrete manually / by mechanical means including stacking of steel bars properly and disposal of unserviceble material with all lifts and upto 50m lead etc.complete as per direction of the Engineer-in-charge. |
AI Tender Summary
Tender Timeline
May 10, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 01, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 01, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender