Public Administrative Department Local Bodies Closing in 0 days TDR #27852286

Request For Proposal For Rate Of Gas Cremation Furnace , Cremator Furnace Shell Consisting Of Combustion Chamber Dully Lined With Refractory Bricks Of High Alumina Contain Of Over 40% Al203 And Backed By Insulating Bricks, With Back Back Up Insulation O

Issued by Local Bodies · sawner, Maharashtra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 May 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
sawner → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Request For Proposal For Rate Of Gas Cremation Furnace , Cremator Furnace Shell Consisting Of Combustion Chamber Dully Lined With Refractory Bricks Of High Alumina Contain Of Over 40% Al203 And Backed By Insulating Bricks, With Back Back Up Insulation Of 25 Mm Thick Ceramic Wool Provided Inside Outer Cover Panels And Operator View Glass And Body Holding At 900 Mm Height From To Ground Level. Heavy Duty Rolled M.S Section And Good Quality Fabrication With Hearth Provided With Refractor Cast Slab. Welding Done Up Side Down To Prevent Leakages And 225 Mm Size Taper Refractory Bricks Are Used To Provide The Crown Or Arch Weighing About 8.5 Tons. , Main Gas Burner With Auxiliary Burner Complete With Refractory Burner Blocks, Atomizing Arrangement With Oil And Air Lines Duly Connected. , Blowers With Air Lining Flange Are Blowers Are Fitted 3 Hp Electric Motors And Are Of 300 Cfm Capacity With Over Load Relays And Contractors And Separate Switches And Fuses. , Gas Reticulation For Supplying The Lp Gas To The Cremator From The Gas Cylinders Storage Shed With Pig Tails, Regulators For 48 Cylinders, Valves Seamless Pipe, Pressure Gauges, Change Over Valve, Solenoid Valves, Shut Off Valves Etc. , Door Assembly Lined Like The Main Furnace Body Of The Cremator, Supported On 3Nos Plummer Blocks, With Counter Weight Type Arrangement And Chain Pulley Blocks For Easy Operation. Door Weight 0.5 Tones. , Body Loading Mechanism With 10Guage High Carbon Steel Metal Mesh Belt With Sprocket And Chain Arrangement With A Geared Reduction Motor And Separate Traveling Crain Type Cable Suspended From Above For Ease In Operation. , Electric Control Panel With 3 Nos Of Pilot Lamps, 12 Nos Of Fuses, 100 Amps Bus Bar, And One Numbers Of Temperature Indicator Of Digital Dancing Type Characters With Contractors And Relays For Each Motors. Separately In M.S Fabricatedunit. , 30 Meter Tall Self Supported M.S Chimney , S.S 304 Water Scrubber, Necessary Ducting Up In To The Chimney. 6000 Litres Capacity Water Tank With Pumps And Plumbing , 7.5 Kvs 3 Phase Generator Duly Coupled With Alternator, Mechanical Change Over, Diesel Engine With 4 Nos Of Anti Vibratory Mounts , Dry Chemical Powder ( Dcp ) 7.5 Kgs Capacity 2 Nos And Carbondi Oxide ( Co2 ) 2 Nos. Of Fire Extinguishers Along With 2 Nos Of Sand Buckets

BOQ

Name of Work: providing gas creamation furnace rate
Sl. No. Item Description
1Cremator furnace shell consisting of combustion chamber dully lined with refractory bricks of high alumina contain of over 40% AL203 and backed by insulating bricks, with back back up insulation of 25 mm thick ceramic wool provided inside outer cover panels and operator view glass and body holding at 900 mm height from to ground level. Heavy duty rolled M.S section and good quality fabrication with hearth provided with refractor cast slab. Welding done up side down to prevent leakages and 225 mm size taper refractory bricks are used to provide the crown or arch weighing about 8.5 tons.
2Main GAS burner with Auxiliary burner complete with refractory burner blocks, atomizing arrangement with oil and air lines duly connected.
3Blowers with air lining flange are blowers are fitted 3 HP electric motors and are of 300 CFM capacity with over load relays and contractors and separate switches and fuses.
4Gas reticulation for supplying the LP Gas to the cremator from the gas cylinders storage shed with pig tails, regulators for 48 cylinders, valves seamless pipe, pressure gauges, change over valve, solenoid valves, shut off valves etc.
5Door assembly lined like the main furnace body of the cremator, Supported on 3nos Plummer blocks, with counter weight type arrangement and chain pulley blocks for easy operation. Door weight 0.5 tones.
6Body loading mechanism with 10guage high carbon steel metal mesh belt with sprocket and chain arrangement with a geared reduction motor and separate traveling Crain type cable suspended from above for ease in operation.
7Electric control panel with 3 nos of pilot lamps, 12 nos of fuses,100 amps bus bar, and one numbers of temperature indicator of digital dancing type characters with contractors and relays for each motors. Separately in M.s fabricatedunit.
830 Meter tall self supported M.S chimney
9S.S 304 water scrubber, necessary ducting up in to the chimney. 6000 litres capacity water tank with pumps and plumbing
107.5 KVS 3 phase generator duly coupled with alternator, mechanical change over, diesel engine with 4 nos of anti vibratory mounts
11Dry Chemical powder (DCP) 7.5 Kgs Capacity 2 nos and Carbondi oxide (CO2) 2 nos. of Fire extinguishers along with 2 nos of sand buckets

AI Tender Summary

OUR REF NO 27852286
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 12-05-2021
Authority
Authority Name Directorate Of Municipal Administration
Work Description Request For Proposal For Rate Of Gas Cremation Furnace , Cremator Furnace Shell Consisting Of Combustion Chamber Dully Lined With Refractory Bricks Of High Alumina Contain Of Over 40% Al203 And Backed By Insulating Bricks, With Back Back Up Insulation Of 25 Mm Thick Ceramic Wool Provided Inside Outer Cover Panels And Operator View Glass And Body Holding At 900 Mm Height From To Ground Level. Heavy Duty Rolled M.S Section And Good Quality Fabrication With Hearth Provided With Refractor Cast Slab. Welding Done Up Side Down To Prevent Leakages And 225 Mm Size Taper Refractory Bricks Are Used To Provide The Crown Or Arch Weighing About 8.5 Tons. , Main Gas Burner With Auxiliary Burner Complete With Refractory Burner Blocks, Atomizing Arrangement With Oil And Air Lines Duly Connected. , Blowers With Air Lining Flange Are Blowers Are Fitted 3 Hp Electric Motors And Are Of 300 Cfm Capacity With Over Load Relays And Contractors And Separate Switches And Fuses. , Gas Reticulation For Supplying The Lp Gas To The Cremator From The Gas Cylinders Storage Shed With Pig Tails, Regulators For 48 Cylinders, Valves Seamless Pipe, Pressure Gauges, Change Over Valve, Solenoid Valves, Shut Off Valves Etc. , Door Assembly Lined Like The Main Furnace Body Of The Cremator, Supported On 3Nos Plummer Blocks, With Counter Weight Type Arrangement And Chain Pulley Blocks For Easy Operation. Door Weight 0.5 Tones. , Body Loading Mechanism With 10Guage High Carbon Steel Metal Mesh Belt With Sprocket And Chain Arrangement With A Geared Reduction Motor And Separate Traveling Crain Type Cable Suspended From Above For Ease In Operation. , Electric Control Panel With 3 Nos Of Pilot Lamps, 12 Nos Of Fuses, 100 Amps Bus Bar, And One Numbers Of Temperature Indicator Of Digital Dancing Type Characters With Contractors And Relays For Each Motors. Separately In M.S Fabricatedunit. , 30 Meter Tall Self Supported M.S Chimney , S.S 304 Water Scrubber, Necessary Ducting Up In To The Chimney. 6000 Litres Capacity Water Tank With Pumps And Plumbing , 7.5 Kvs 3 Phase Generator Duly Coupled With Alternator, Mechanical Change Over, Diesel Engine With 4 Nos Of Anti Vibratory Mounts , Dry Chemical Powder ( Dcp ) 7.5 Kgs Capacity 2 Nos And Carbondi Oxide ( Co2 ) 2 Nos. Of Fire Extinguishers Along With 2 Nos Of Sand Buckets
Basic Detail
Tender No kavi/npsa/vivi/RFP/2021
Bidding Type Tender
Location
City sawner
State Maharashtra
Key Dates
Publish Date 07 May 2021
Submission Date 12 May 2021
Open Date 14 May 2021
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD Ref. Documents
Exemption Not Available
Document List
8218af4b-68e6-49b3-9019-4de1cf8679e2.html
BOQ_1181589.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 07, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
May 12, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
May 14, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

8218af4b-68e6-49b3-9019-4de1cf8679e2.html

xls

BOQ_1181589.xls

pdf

Tendernotice_1.pdf

TenderDetail
Loading tenders