strengthening and black topping To Tale Maruti Mandir To Mahadikwadi Road Vr 382 Km 0 / 700 To 1 / 500 Tal Khed Dist Ratnagiri ( For Majoor Sahakari Sanstha Only
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 May 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khed → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
strengthening and black topping To Tale Maruti Mandir To Mahadikwadi Road Vr 382 Km 0 / 700 To 1 / 500 Tal Khed Dist Ratnagiri ( For Majoor Sahakari Sanstha Only
BOQ
| Sl. No. | Item Description |
| 1 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / In Rs.Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal, By breaking rubble obtained by blasting.(Hand broken) |
| 2 | Supplying soft murum at the road site including conveying and stacking complete |
| 3 | Spreading 40 mm metal for road work including sectioning etc complete |
| 4 | Spreading hard murum/soft murum/gravel or kankarfor side width etc complete |
| 5 | Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete |
| 6 | Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) roadsurface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 1.75 Kilogram/Square Metre, spreading 12mm.size chips compacting with static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates areconsidered to arrive at rates) |
| 7 | Providing and laying premix carpet 20mm thick specified graded crushed aggregates for wearing course including suppling all materials preparing and cleaning the base loading of aggregates with front edge loader heating bitumen and aggregates modern drum mix type of hot mix plant transporting the mixed materials from tipper and laying with paver finisher to the required level and grade rolling with power roller (excluding the cost of tack coat) |
| 8 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of VG-30 grade preparing exisiting road surface heating and applying bitumen @ 0.98 kgsqm by mechanical means spreading chips and rolling by static roller having weight 8 to 10MT complete(VG-30bulk bitumen rates are considered to arrive at rates) |
| 9 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum includingdressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed |
| 10 | Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coatretaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. longinflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade |
| 11 | Testing charges |
AI Tender Summary
Tender Timeline
May 07, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMay 13, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 15, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender