Constructing strengthening and black topping To Ambaye Patilwadi Road Km 0 / 00 To 0 / 200 Tal Khed Dist Ratnagiri ( For Majoor Sahakari Sanstha Only )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 May 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khed → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructing strengthening and black topping To Ambaye Patilwadi Road Km 0 / 00 To 0 / 200 Tal Khed Dist Ratnagiri ( For Majoor Sahakari Sanstha Only )
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum includingdressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed |
| 2 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / In Rs.Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)80 mm Metal, By breaking rubble obtained by blasting.(Hand broken) |
| 3 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / In Rs.Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal, By breaking rubble obtained by blasting.(Hand broken) |
| 4 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 5 | Spreading 80/40 mm metal for road work including sectioning etc complete |
| 6 | Spreading hard murum/soft murum/gravel or kankarfor side width etc complete |
| 7 | Compacting the sub grade / gravel / size metal (200 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete |
| 8 | Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete |
| 9 | Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) roadsurface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 1.75 Kilogram/Square Metre, spreading 12mm.size chips compacting with static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete. incudling applying tack coat of bitumen of specificed grade at the rate of 0.30 kilogram square metre (on existing bitumen surface) |
| 10 | Providing 20mm thick premix bituminous carpet including supplying all materials, preparing and cleaning the base,heating bitumen applying tack coat at specified rate, mixing hot bitumen and chips,laying the carpet layer and compacting etc complete by bulk asphalt (excluding Tack coat) (Cold mix with prior approval) |
| 11 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of VG-30 grade preparing exisiting road surface heating and applying bitumen @ 0.98 kgsqm by mechanical means spreading chips and rolling by static roller having weight 8 to 10MT complete(VG-30bulk bitumen rates are considered to arrive at rates) |
| 12 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steelcentering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 13 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite /quartzite/ gneiss metal for coping to plinth or parapet, moulded or chamfered as perdrawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag,plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) |
| 14 | Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coatretaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. longinflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade |
| 15 | Test charges |
AI Tender Summary
Tender Timeline
May 07, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMay 13, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 15, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender