Supply Of Implant-1 D.H.S. Plate Long/short Barrel (38/25 mm)with Round, D. C., combi Hole 1250, 1300, 1350, 1400 Angle; 2, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18 holes 2 D.H.S Screw 22mm /16mm threading with Compression Screw (Top-Bolt). (36 mm) 50 to 115 mm, in 5mm increments 3 Pediatric D.H.S. Set 4 D.C.S Plate (950) with Round, D. C., combi Holes 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20, 22, 24 holes 5 Angle Blade Plate (950) with Round, D. C., combi Holes, Blade size 50, 55, 60, 65, 70 & 75 mm and 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18 holes 6 Trochanteric Stabilisation Plate to be used with DHS 7 Distal Femur Locking Compression Plate (Right & Left) Anatomical pre-shaped & Contoured with self-tapping Locking Head Screws; with Round Locking Holes for metaphyseal portion of plate & Combiholes for shaft of plate. 8 Medial & Lateral Proximal Tibial Buttress Plate (T- & L- shape)- as per AO specifications. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes 9 Proximal Medial & Lateral Tibial Plate 3.5 mm(Right & Left) Anatomically pre shaped and low profile. Two different plate design for left and right side with indication on side of plate. Plate should have 2 mm holes for Proximal Fixation with k-wire and sutures for meniscal repair. Holes should accept 3.5 mm locking head or 3.5 mm Standard Cortical Screws from 4 to 20 holes with increment of 2 holes. 10 Proximal Medial/ Lateral Tibial Locking Plate for 4.5 mm screws Anatomically pre shaped and low profile design, two different plate design for left and right with indication on plate. Round metaphyseal locking holes and combi holes in shaft portion for locking and standard screws. Different angulation in proximal part of the plate to avoid primary and secondary loss of reduction. Should be compatible for less invasive technique Holes should accept 5 mm locking head or 6.5 mm standard cancellousl screws from 5 to 13 holes 11 Hockey Plate For Tibia (Right & Left) 5, 7, 9, 11, 13, 15, 17 Holes 12 Contoured Medial/ Antero-lateral Plate for Lower end Tibia 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes 13 Distal Medial Tibial Locking Plates 2.7/ 3.5 mm. Anatomically pre-shaped and low profile and specific for right and left side with Indication of side on plate, compatible with less invasive fixation. Rounded edges screw heads should be received into Distal section of plate to allow multiple locking head screw placement of 2.7/ 3.5 mm to provide adequate fixation of metaphyseal portion of tibia, and size 4 to 14 holes with increment of 2 holes. 14 Anterolateral Distal Tibial Locking Plate 3.5 mm. Anatomically pre shaped and low profile and specific for right and left side with indication of side on plate. Plate should have head holes to accept 3.5 mm Locking head or standard cortical or 4 mm standard cancellous screw. Head should be received into the plate. Size from 5 to 21 holes with increment of 2 holes 15 Cobra Head Plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes 16 Cobra Head Locking Plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes 17 Hook Plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes 18 Hook Locking Plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes 19 Proximal Humerus Locking Plate (PHILOS Plate). Anatomically pre-countoured plates, Should have precisely fitting sleeves for precision placement ofscrews, Should accept 3.5 mm Locking Head Screws. The Screws provided should be available from 26 to 60 mm length. The head of the plate should have holes for securing tuberosities to the plate with sutures. Should have low profile of the screws heads to prevent tissue irritation 3, 4, 5, 6, 7, 8, 9, 10, 12 Holes 20 (A) Anatomically pre-countoured plates for Distal Medial Humerus for anatomical fit with left & right version. Should have precisely fitting sleeves for precision placement of screws. Should accept self-tapping Locking Head Screws. The shaft portions of the plate should have Combi holes. Should have low profile of the screws heads to prevent tissue irritation. 3, 5, 7, 9 & 14 Holes 21 (B) Dorso-lateral Plates with & without Lateral support with right & left versions. Anatomically pre-countoured plates, The shaft portions of the plate should have Combi holes. Should have low profile of the screws heads to prevent tissue irritation.3, 5, 7, 9 & 14 Holes 22 Calcaneal Plate. 23 Calcaneal Locking Plates. 24 Anatomical Olecranon locking plate of all sizes. 25 Clavicle Locking Plate- Antero-superior type, Anterior type 26 Clavicle Hook Plate. 27 Elise Plate/ Contoured Plate for Distal End Radius. 3, 4, 5, 6, 7, 8, 9, 10 Holes 28 Locking Elise Plate/ Contoured Locking Plate for Distal End Radius. 3, 4, 5, 6, 7, 8, 9, 10 Holes 29 Variable angle Locking 30 H-Plate. 3, 4, 5, 6, 7, 8, 9, 10 Holes 31 Y- Plate. 3, 4, 5, 6, 7, 8, 9, 10 Holes 32 D.C.P. Small. 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes 33 D.C.P. Narrow. 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes 34 D.C.P. Broad. 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes 35 L.C.D.C.P Small. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes 36 L.C.D.C.P. Narrow. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes 37 L.C.D.C.P. Broad. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes 38 L.C.P Small. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes 39 L.C.P. Narrow. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes 40 L.C.P. Broad. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes 41 Semitubular Plates 4.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes 42 Semitubular Plates 3.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes 43 1/3 rd Tubular Plates 4.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes 44 1/3 rd Tubular Plates 3.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes 45 Quarter-Tubular Plates 2.7 mm. 3, 4, 5, 6, 7, 8 Holes 46 Straight Mini Plates 2.0 mm & 1.5 mm with screws. 47 Reconstuction Plates 3.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes 48 Reconstuction Locking Plates 3.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes 49 Reconstuction Plates 4.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes 50 Reconstuction Locking Plates 4.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes 51 Cortical Screw 4.5 mm (TPI- 20). 14, 16, 18 …60 mm, in 2 mm increments. 52 Cortical Screw 3.5 mm (TPI- 20). 8, 10, 12 …60 mm, in 2 mm increments. 53 Cortical Screw 2.7 mm (TPI- 20). 6, 8, 10 …30 mm, in 2 mm increments. 54 Locking Cortical Screw 5.0 mm. 14, 16, 18 …60 mm, in 2 mm increments. 55 Locking Cortical Screw 3.5 mm. 8, 10, 12 …60 mm, in 2 mm increments. 56 Fully threaded Cannulated Cancellous Screws 4mm. 25, 30 ….115 mm, in 5 mm increment 57 16 mm threaded Cannulated Cancellous Screws 4 mm. 25, 30 ….115 mm, in 5 mm increment. 58 32 mm threaded Cannulated Cancellous screws 4 mm 25, 30…….115 mm, in 5 mm increment. 59 Fully threaded Solid Cancellous Screws 4 mm 25, 30…….115 mm, in 5 mm increment 60 16 mm threaded Solid Cancellous Screws 4 mm 25, 30,…….115 mm, in 5 mm increment 61 32 mm threaded Solid Cancellous screws 4 mm 25, 30,…….115 mm, in 5 mm increment 62 Fully threaded Cannulated Cancellous Screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment 63 16 mm threaded Cannulated Cancellous Screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment 64 32 mm threaded Cannulated Cancellous screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment 65 Fully threaded Solid Cancellous Screws 6.5 mm (20 TPI) 25, 30,…….115 mm, in 5 mm increment 66 16 mm threaded Solid Cancellous Screws 6.5 mm (20 TPI) 25, 30,…….115 mm, in 5 mm increment 67 32 mm threaded Solid Cancellous screws 6.5 mm (20 TPI) 25, 30,…….115 mm, in 5 mm increment 68 Fully threaded Locking Cannulated Cancellous Screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment 69 16 mm threaded Locking Cannulated Cancellous Screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment 70 32 mm threaded Locking Cannulated Cancellous screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment 71 Fully threaded Locking Solid Cancellous Screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment 72 16 mm threaded Locking Solid Cancellous Screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment 73 32 mm threaded Locking Solid Cancellous screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment 74 Washer Round, 13 mm, 10 mm, 7.0 mm, 4.5 mm. 75 Spiked Washer, 13.5 mm, 8.0 mm, 3.2 mm. 76 Malleolar Screw,4.5 mm 15, 20, 25,………100 mm 77 Herbert’s screw 78 Interlocking Femur Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11,12 mm with lengths from 340 to 440mm. 79 Interlocking Solid Femur Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11,12 mm with lengths from 340 to 440mm. 80 Recon Nail (Right & Left) (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11,12 mm with lengths from 340 to 440mm. 81 Proximal Femur Nail (P. F. N.) (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11,12 mm with lengths from 340 to 440mm. 82 Trochanteric Entry Femur Nails with Compatible Locking Bolts of Diameter 8,9,10,11,12 mm with lengths from 340 to 440mm. 83 Supracondylar Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 10,11,12 mm with lengths m150,200,250,300 mm . 84 Interlocking Tibia Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11 mm with lengths from 280 to 380 mm. 85 Interlocking Distal Tibia Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11 mm with lengths from 280 to 380 mm. 86 Interlocking High/Upper Bent Tibia Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11 mm with lengths from 280 to 380 mm. 87 Interlocking Solid Tibia Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11 mm with lengths from 280 to 380 mm. 88 Expert Tibial Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11 mm with lengths from 280 to 380 mm. 89 Interlocking Humerus Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 6,7, 8 mm with lengths from 200 to 300 mm. 90 Interlocking Bolts 2.9 mm 12 to 30 mm 91 Interlocking Bolts 3.9 mm 14 to 48 mm 92 Interlocking Bolts 4.9 mm 16 to 120 mm 93 Proximal Bolt RECON (As per AO specifications) of Diameter 6.4mm with lengths from 60 to 110 mm. 94 Proximal Bolt RECON Cannulated (As per AO specifications) of Diameter 6.4mm with lengths from 60 to 110 mm. 95 Proximal Bolt P.F.N. Cannulated 6.4 mm 60 to 110 mm 96 Proximal Bolt P.F.N. Cannulated 8.0 mm 60 to 120 mm 97 Kuntscher’s Nail of 7, 8, 9, 10, 11, 12 mm diameter 98 V-Nail 99 Square Nail for Ulna of2, 2.5, 3, 3.5 mm diameter 100 Square Nail for Radius of2, 2.5, 3, 3.5 mm diameter 101 Rush Nail of 2, 2.5, 3, 3.5 mm diameter 102 Ender’s Nail of 2,2.5,3.0,3.5, 4, 4.5 mm diameter. 103 Titanium Elastic Nailing System (TENS) of all sizes. 104 Non fenestrated bipolar prosthesis of sizes 37, 39,…………….51, 53 mm 105 Fenestrated bipolar prosthesis of sizes 37, 39,…………….51, 53 mm 106 Bipolar Prosthesis with modular stem and head. 107 Thompson Endo-Prosthesis of sizes 37, 39, 41, 43, 45, 47, 49, 51, 53 mm. 108 Long/short stem Austin moore prosthesis of sizes 37, 39, 41, 43, 45, 47, 49, 51, 53 mm. 109 Bone cement (Price to be quoted separately for the following 4 items) :- Cement Gun should be provide by the dealer as loan instruments without extra charges during Total Hip Replacement surgeries. Cost of Disposable Nozzle to be provided separately . 110 1. High viscosity Poly Methyl Meth-Acrylate 40gms with working time of 5-6 min. 111 2. Medium to low viscosity Poly Methyl Meth-Acrylate 40gms. 112 3. High viscosity Poly Methyl Meth-Acrylate 40gms with working time of 5-6 min with Gentamycin. 113 4. Medium to low viscosity Poly Methyl Meth-Acrylate 40gms with Gentamycin. 114 Cement stopper of size 7,8,9……to………….16mm 115 Calcium sulphate bone substitutes 116 Cemented Total Hip Replacement :-*Stem should be as per Standard Charnley’s Design with metal of sufficent strength to withstand life-time use in the patients. Different sizes and offsets to be quoted.*Cup of Polyethylene High Density High Molecular Weight Highly Crosslinked with anti-oxidative manufacturing & storing process (to increases the shelf life) with different offsets. *Cup Sizes : - 38 to 60 mm Outer Diameter. *Modularity for neck length and head sizes 22, 28, 32 and 36 mm. *Acetabular component should be metal backed as well as all poly. Metal back should have modularity to use polyethylene as well as Ceramic. All Polyethylene liner as well as cups should be made of highly Cross-linked High Molecular Weight polyethylene with measures to prevent Oxidation . The metal used for stem should be of high tensile strength and fatigue strength like Cobalt-Chrome. 117 Uncemented T.H.R :-*The stem of the Femoral Component should have Double Taper Geometry with Plasma Hydroxy-Appetite coating with at least thickness of the coating of 100 to 200 microns or Porous coated with sufficient pore size and thickness of porous coating to have optimal bony ingrowth. The stem should accept metal (Cobalt- Chrome) as well as Ceramic Head (Alumina with Zirconia)*Cup of Polyethylene High Density High Molecular Weight Highly Crosslinked with anti-oxidative manufacturing & storing process (to increases the shelf life) with different offsets. Preferably the cup should have longer posterior wall with flange for cement pressurization. Metal Back cup with Plasma Hydroxy-Appetite coating with design to lock into the host bone to provide primary fixation with provision for screw fixation. Should accept liners made up of Highly Cross-Linked High Molecular Weight Poly-Ethylene & Delta Ceramic (Alumina with Zirconia).*The Femoral Head should be made up of Cobalt-Chrome or Delta-Ceramic and should have different Neck length.*Metal screws for fixation of metal cup.*The Prices should be quoted separately for stems, cups liners of polyethylene and ceramic as per specifications mentioned above and as well as for metal & ceramic heads of different sizes as per specifications quoted above. 118 Revision T.H.R:-*Revision stem, Modular Straight Cylindrical And Double Tapered, Porous & Hydroxy-Appetite coated of different lengths. The diameter and length of the stem should be variable with a provision to address curve of the femur with long stem. *Revision cups to be provided with large diameter of upto 65 mm with augments for bone loss in the form of cages and metal rings, as well as, wedges. All these to be quoted separately. 119 Total Knee Replacement :- All polyethylene & metal back. Mobile bearing & fixed bearing Knees Highly polished tibial tray to prevent back wear in Fixed bearing knee. Pateller component should to be quoted separately Cruciate-Retaining/ Cruciate-Scarificing Designs. For revision, Constraint designs with Intramedullary extension . Designs for achieving high flexion. All components should be separately quoted. Note:- Company should be US-FDA /CE/ GMP certified.. Should provide a technician intraoperatively wherever applicable. Should provide suitable size cutting saw with drills (pneumatic/electric) , wherever applicable. Should provide all the complementary instrumentation and trials given/provided by the manufacturing company for the application of implant during operation. Catalogue/ list of these instrumentation and trials should be included in tender quotations. Only those Joint designs to be sent which have had a proven field record of longevity as substantiated by published literature, the tenderer should provide the required documents 120 Regular Shoulder prosthesis & Reverse Shoulder Prosthesis (Prices to be quoted separately) of size 35 mm, 39 mm 121 Total elbow prosthesis, Regular and custom made. 122 Radial head prosthesis of following sizes :-16 mm x 4 mm x 6 mm, 18 mm x 4 mm x 6 mm, 18 mm x 5 mm x 6 mm, 20 mm x 5 mm x 8 mm 123 Continuous loop endobutton One size titanium button with multiple pre-measured loop sizes of 15, 20, 25, 30, 35, 40mm lengths. Preloaded with polyester braid suture (#5 leading suture & #2 flipping suture) 124 Low- Profile Cancellous Screws Titanium 6.5 mm of sizes 25, 30, 35, 40 mm. 125 Spiked and suture Washers of 14 and 18 mm. 126 Tibial Post Fixation Screw Titanium made of Dia 6.5 mm and 30 mm length 127 Shaver Blades (SS alloy / platinum tip):-Single cutting: Razor sharp toothed inner blade No teeth on outer window 4mm, 4.5 mm 5mm 5.5mm Straight and angled Double Cutting: The narrow gap between inner and outer cutting surfaces 4mm, 4.5 mm 5mm 5.5mm Straight and angled 128 Resector: 4mm, 4.5 mm 5mm 5.5mm Straight and angled 129 Burr Barrel burrs 4mm, 4.5 mm 5mm 5.5mm 6 flute and 12 flute Round Burrs 4mm, 4.5 mm 5mm 5.5mm 6 flute and 12 flute 130 Spiked Ligament Staple Titanium made. 131 Cannulated Cross Pin Titanium made. 132 Cannulated Interference Screws- Roundhead Titanium/Bio absorbable. Standard 4.5mm hex for easier insertion and removal in diameters 8mm, 9mm, 10mm and 11mm in lengths 20mm, 25mm, 30mm and 35mm. 133 Cannulated Interference Screws- Fully Threaded Titanium/Bio absorbable in diameters 8mm, 9mm, 10mm and 11mm , in lengths 20mm, 25mm, 30mm and 35mm 134 Braided Composite suture (i.e. Bio Fiber/fiber wire) multi-strand,long chain ultra-high molecular weight polyethylene (UHMWPE) core with a braided jacket of polyester and UHMWPE. Tapered ,cutting ,reverse cutting and diamond end ,3/8 circle and 1/2 circle. white; white/blue; white/green colours. USP size 2/ EP size 5. length 38 inches/90 cms. 135 Braided polyester suture( i.e. Ethibond ), 2-0 and 5-0 with 4 strands braided, sterile, surgical suture composed of Poly (ethylene terephthalate). prepared from fibers of high molecular weight, long-chain, linear polyesters having recurrent aromatic rings as an integral component. coated with polybutilate or poly {oxy-1, 4 butanediyloxy (1, 6-dioxo-1, 6 hexanediyl) 136 5mm synthetic, braided, non-absorbable suture (i.e. Mersilene tape) 137 Titanium Interference screws for ACL repair. Sizes 8 mm, 9 mm, 10 mm, 11 mm, 12 mm. 138 Titanium Endo-Button. 139 Titanium Endo-Disc. 140 A.O. Open / closed Clamps, 2.5, 3.5, 4.5 mm. 141 Cylindrical/ Universal Clamps, 2.5, 3.5, 4.5 mm 142 Rod to Rod Clamp. 143 Transverse Clamp. 144 Cortical Schanz Pin 2.5,3.0,3.5,4,4.5 mm. 145 Cancellous Schanz Pin 5,6 mm. 146 Tubular Rod. 147 Connecting Rod of 4, 5, 8, 10, 11 mm diameter. 4”, 6”, 8”, 10”, 12”, 14”, 16”, 18”. 148 A.O. Type External Fixator R/U. 149 Finger Distractor. 150 Radius Ulna Distractor. 151 Rail Road Fixator for Femur / Tibia. 152 Illizarov’s Ring Fixator. Half Ring of 80, 100, 120, 140, 160, 180, 200, 220, 240 mm. 153 Italian Femoral Arches 900, 1200. 80, 100, 120, 140, 160, 180, 200, 220, 240 mm. 154 Multiple Fixation Clamps. 155 Schanz Pin Fixation Bolts. 156 Oblique Supports. 157 Threaded Rods 8 mm diameter. 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450 mm. 158 Telescopic Rods. 75, 100, 125, 150, 175, 200, 250, 300, 350, 400 mm. 159 Male & Female Post, 2, 3, 4, 5 hole set 160 Male & Female Hinges, 1 hole set. 161 Connection Plates, 5, 6, 7, 8 holes. 162 Twisted Plates, 5, 6, 7, 8 holes. 163 Illizarov’s Wires Bayonet Type. 1.5, 1.8, 2.0 mm. 164 Illizarov’s Wires Olive Type. 1.5, 1.8, 2.0 mm. 165 Connecting Bolt. 166 Connecting Nut 10 mm. 167 Wire Fixation Bolts Cannulated. 168 Wire Fixation Bolts Slotted. 169 JESS External fixator set. 170 Pelvic C Clamp. 171 Nails for Pelvic C Clamp. 172 Steinman Pin of 3, 3.5, 4, 4.5, 5 mm. 173 Denham Pin of 3, 3.5, 4, 4.5, 5 mm. 174 Kirschner Wire double ended Trocar Tip/ Threaded Tip. Diameter 1,1.2, 1.5,1.8 2, 2.5, 3 mm. Length 6”, 9”, 12”. 175 S.S. Wire Reel of 16 to 28 Gauze. 176 Knowel’s Pin. 177 A.M. Pin. 178 Gigli Saw Wire. 179 Titanium Pedicle Screw connecting Rod Set (MRI- compatible). 180 Titanium Cage (MRI- compatible) 10mm, 13mm, 16 mm, 19 mm. 181 Titanium Staple (MRI- compatible). 182 Titanium Transverse Connector (MRI- compatible). 183 Titanium Mono-Axial Screws (MRI- compatible) 5.3 mm 30 mm, 35 mm, 40 mm, 45 mm. 184 6.0 mm 30 mm, 35 mm, 40 mm, 45 mm. 185 Titanium Poly- Axial Screws (MRI- compatible) 186 5.3 mm 30 mm, 35 mm, 40 mm, 45 mm. 187 6.0 mm 30 mm, 35 mm, 40 mm, 45 mm. 188 Hartsheel Implants for Spine (MRI- compatible). 189 Cervical Plates (MRI- compatible). 190 Harrington Rod System (MRI- compatible). 191 Mono axial locking screw 4.5 mm, 5.5 mm, 6.5 mm diameter 30-50 mm with 5 mm of increament. 192 Mono axial locking screw 6.5 mm diameter (Iliac screw) , 60 – 75 mm with 5 mm of increament 193 Cross link (Inter connector) 5 mm 194 Cervical H-plate ordinary hole 4 hole, 20 – 35 mm with 2.5 mm of increament 195 Cervical H-plate ordinary hole 6 hole, 35 – 55 mm with 2.5 mm of increament 196 Cervical H-plate ordinary hole 8 hole, 47.5 – 65 mm with 2.5 mm of increament 197 Cervical spine locking plate 5 hole, 25, 29, 33 mm 198 Cervical spine locking plate 8 hole, 37, 41, 45 mm 199 Drummonds wire without button 200 Drummonds wire with button 201 Sublaminar wire 12” 202 Sublaminar wire 18” 203 Disposable Pulse Lavage Tubings.
