Military Engineer Services-MES has published Repair And Maintenance Of Sanitary Fittings , Roof Sheet , Door And Window , Periodical Services And Other B/R Wks At 112 Engr Regt , 935 Ifsu , 18 Kumaon , 22 Rajput , Apjd Zong , Maratha Ground And Chuje Gg Area Under Ge Tawang. Submission Date for this Tender is 27-05-2021. Plumbing and Sanitary Work Tenders in Tawang Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| NAME OF WORK : REPAIR & MAINTENANCE OF SANITRY FITTINGS, ROOF SHEET, DOOR/WINDOW, PERIODICAL SERVICES AND OTHER B/R WKS AT 112 ENGR REGT, 935 IFSU, 18 KUMAON, 22 RAJPUT, APJD ZONG, MARATHA GROUND AND CHUJE GG AREA UNDER GE TAWANG | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling plain or corrugated steel sheeting any thickness, complete all as specified and directed. | 205 | SQM | |
| 2 | 2 | S&F Galvanised corrugated 0.63mm thick mild steel sheeting with two corrugation side lap, fixed with J or L bolt, complete all as specified and directed. | 40 | SQM | |
| 3 | 3 | Fixing only old serviceable Galvanised, corugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc completed all as specified and directed. | 60 | SQM | |
| 4 | 4 | S & F plain Galvanised MS steel sheeting of 0.8mm thick class 8 as in ridges and qutters etc, complete all as specified and directed. | 5 | SQM | |
| 5 | 5 | Supply and fix Pre- painted galvalume aluminum zinc coating (AZ-150)GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. Make : Dyna. (Note : The whole site can not be given in a single lot being Maintenace work site will be handed over in peace mail). | 90 | SQM | |
| 6 | 6 | S&F Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed. | 10 | SQM | |
| 7 | 7 | M&L for preparing of new steel surfaces of any description , over 10 cm width or girth,not otherwise described two coat of synthetic enamel paint over a coat of red oxide primer , complete all as specified and directed. | 40 | SQM | |
| 8 | 8 | M&L for preparing of old steel surfaces of any description , over 10 cm width or girth,not otherwise described to receive painting by a cleaning and two coat of synthetic enamel paint , complete all as specified and directed. | 60 | SQM | |
| 9 | 9 | Dismantling floor hearth or wall tiling incl cement mortar bedding but not backing, removing serviceable tiles to stores complete, complete all as specified and directed. | 355 | SQM | |
| 10 | 10 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:4) , complete all as specified and directed. | 140 | SQM | |
| 11 | 11 | Materials and Labour for 10 mm thick Plastering of cement mortar (1:4) for fixing wall tiles as in dado/skirting, complete all as specified and directed. | 30 | SQM | |
| 12 | 12 | Materials and Labour for non skid ceramic and anti scratch coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloure of tiles complete all as specified and directed. Make : Somany. | 140 | SQM | |
| 13 | 13 | M&L for Cloured Glazed ceramic tiles in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match , complete all as specified and directed. Make : Somany. | 45 | SQM | |
| 14 | 14 | Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as directed. | 7.85 | CUM | |
| 15 | 15 | Materials and Labour for 40mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggt as in floor finished, complete all as specified and directed. | 130 | SQM | |
| 16 | 16 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. | 13 | CUM | |
| 17 | 17 | Materials and Labour for Pre-cast cement concrete (1:3:6) type C1 using 20 mm graded stone aggt block masonry with solid blocks, n.exc. 10 cm in width and setting in mortar(1:6) as in wall complete all as specified and directed. | 30 | SQM | |
| 18 | 18 | M&L for providing PCC 1:3:6 type C-1, Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. | 10 | CUM | |
| 19 | 19 | Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in sub-base of floors, plinth protection finished the surface of concrete fair and even , complete all as specified and directed. | 35 | SQM | |
| 20 | 20 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n.exceeding 1.50 Sqm, complete all as directed. | 4 | EACH | |
| 21 | 21 | Taking down chowkhats or frame exc 1.5 sqmtr but n.exc 4 sq m(without taking off shutters from frames), complete all as specified and directed. | 4 | EACH | |
| 22 | 22 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawin, complete all as specified and directed. Make ; (Rajshree) | 2.2 | SQM | |
| 23 | 23 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing , complete all as specified and directed. | 5.8 | RM | |
| 24 | 24 | S&F II class HW plain solid straight chowkhats and frame wrought framed rebated on the soild rounded or chamfered put together with glue pinned at joints, complete all as specified and directed. | 0.18 | CUM | |
| 25 | 25 | S/F 30 mm thick flush shutters,solid core construction with block board core and plywood face panel, commercial type on both sides, complete all as specified and directed. | 5.2 | SQM | |
| 26 | 26 | S&F 30mm th 2nd class hard wood glazed and skelton shutter open rebated and prepaid to receive glass gauze etc, divieded into squares (with sash bar), edges of plain, chamfered or rounded fitted with cut and mitred beads for secuering glass excecter size of members of shutter as specified in SSR part-I, sec 8 clause 8.20(a), complete all as specified and directed. | 4.8 | SQM | |
| 27 | 27 | Supply and fix mild steel butt hinges, medium weight, cold rolled 100 mm size , complete all as specified and directed. | 6 | EACH | |
| 28 | 28 | Supply and fix Aluminium anodized barrel tower bolts of extruded section, 150 mm long, complete all as specified and directed. | 6 | EACH | |
| 29 | 29 | Supply and fix Aluminium handles, cast type, anodized, 150 mm size , complete all as specified and directed. | 5 | EACH | |
| 30 | 30 | S&F for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed , complete all as specified and directed. | 5 | EACH | |
| 31 | 31 | S&F MS butt hinges medium weight 75mm long, complete all as specified and directed. | 4 | EACH | |
| 32 | 32 | S&F Aluminium anodized barrel tower bolts, extruded section 125mm long, complete all as specified and directed. | 5 | EACH | |
| 33 | 33 | S&F Aluminium anodized handles, D type,100mm long, complete all as specified and directed. | 5 | EACH | |
| 34 | 34 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed. | 10 | SQM | |
| 35 | 35 | Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exceeding 0.50sqm in each pane , complete all as specified and directed. | 10 | SQM | |
| 36 | 36 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) without using extgra cement, complete all as specified and directed. | 40 | SQM | |
| 37 | 37 | Applying three coats of white wash on new wall surface including preparation of surface, complete all as specified and directed. | 40 | SQM | |
| 38 | 38 | Dismantling timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and directed. | 0.2 | CUM | |
| 39 | 39 | M&L for Second class clean swan hard-wood in scantlings, complete all as specified and directed. | 0.2 | CUM | |
| 40 | 40 | Dismantling of timber boarding, any description, fixed in any position with nails complete all as directed. | 5 | SQM | |
| 41 | 41 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as directed. | 139 | SQM | |
| 42 | 42 | S & F Boarding second class hardwood 50 mm thick supplied & fixed with nails in any situation (except flooring and skirting) clean sawn with butt joints 40, complete all as specified and directed. | 5 | SQM | |
| 43 | 43 | Supply and Fix 4mm thick Plywood, grade BWR, type BB, fixed with nails to timber framework as in ceiling etc complete all as specified and directed. | 70 | SQM | |
| 44 | 44 | Supply and Fix 6mm thick Plywood, grade BWR, type BB, fixed with nails to timber frame work as in wall panelling etc complete all as specified and directed. | 30 | SQM | |
| 45 | 45 | M&L galvanized iron snap grid with powder coated section of size 24mmx38mmx0.7mm thick ‘T’ section and 25mmx25mmx0.35mm thick wall cleat of angle section and 4mm dia galvanized iron wire suspended with 4mm thick non AC board of Make : Zipro/ M/s EVEREST Industries Ltd of size 600mmx600mm and shall be fixed to galvanized iron snap grid of above section with mild steel screws as per manufacturer’s instructions including two coats of distemper oil emulsion over a coat of cement primer complete all as specified and as directed. | 39 | SQM | |
| 46 | 46 | Materials and Labour for applying two coats of synthetic enamel paint over one coat of primer on new untreated surfaces of ply wood or wood based materials of any description not otherwise described over 10cm width or girth complete all as specifed and directed. | 100 | SQM | |
| 47 | 47 | Taking up or down 20 mm steel tubing/PVC/PPR and connections, including cleaning for re-fixing to store complete all as specified and directed. | 80 | RM | |
| 48 | 48 | S&F in repair 16mm OD 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed. (Note : Contractor should resolve the complain within 24 Hrs and should give feedback to the Engineer in charge). | 80 | RM | |
| 49 | 49 | S/F stainless steel sink 1 mm thick for kitchen with plug waste pipe washers incl cantilever cast iron brackets, connecting union to waste pipe etc including bedding in cement mortor on to dwarf wall overall size 495x420mm with bowl size 410mm x 330mm x160mm with 40 dia mm CP waste coupling in repairs , complete all as specified and directed.( Make : Nirali/Blue star/Anjali) | 3 | EACH | |
| 50 | 50 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white with "P" or "S" Trap front or back inlet fixing bols, PVC seat cover and making all necessary connection c, complete all as specified and directed. (Note : Contractor should resolve the complain within 24 Hrs and should give feedback to the Engineer in charge).( Make : CERA/HINDWARE/PARRYWARE) | 3 | EACH | |
| 51 | 51 | S&F in repair Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) incl setting the trap and pan in lime mortar (1:2:5) all round and "P" or "S" Trap, complete all as specified and directed. ( Make : CERA/HINDWARE/PARRYWARE) | 5 | EACH | |
| 52 | 52 | S&F for 10Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. ( Make : CERA/HINDWARE/PARRYWARE) | 5 | EACH | |
| 53 | 53 | S&F for 450mm long PVC connections 15mm size with PTMT nuts, complete all as specified and directed. | 5 | EACH | |
| 54 | 54 | S&F in repairs 15mm cromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. | 8 | EACH | |
| 55 | 55 | S&F in repairs Stop valves 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. | 6 | EACH | |
| 56 | 56 | S&F in repairs CP Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe, complete all as specified and directed. (Note : Contractor should resolve the complain within 24 Hrs and should give feedback to the Engineer in charge). | 3 | EACH | |
| 57 | 57 | S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm with coupling excluding taps, waste, chain and plug and porcelain stopper but including brackets white incl 32/40mmdia 90cm long PVC waste down pipe, complete all as specified and directed. (Note : Contractor should resolve the complain within 24 Hrs and should give feedback to the Engineer in charge).( Make : CERA/HINDWARE/PARRYWARE) | 3 | EACH | |
| 58 | 58 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers , complete all as specified and directed. | 5 | EACH | |
| 59 | 59 | S&F in repair Vitreous China Urinal, Half stall type, white incl flush pipe, waste pipe, coupling, urinal spreader, complete all as specified and directed. (Note : Contractor should resolve the complain within 24 Hrs and should give feedback to the Engineer in charge).( Make : CERA/HINDWARE/PARRYWARE) | 2 | EACH | |
| 60 | 60 | S&F for 125/110 bore dia PVC (SWR) 'P’ trap, complete all as specified and directed.Make Suprem. | 2 | EACH | |
| 61 | 61 | S&F for Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms), complete all as specified and directed. | 2 | EACH | |
| 62 | 62 | S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. Make Suprem. | 8 | RM | |
| 63 | 63 | S&F PVC (SWR) bends any radius 110mm dia with access door, complete all as specified and directed. | 3 | EACH | |
| 64 | 64 | S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia with access door, complete all as specified and directed. Make Suprem. | 3 | EACH | |
| 65 | 65 | S&F PVC (SWR) vent cowl 110mm dia, complete all as specified and directed.Make Suprem. | 2 | EACH | |
| 66 | 66 | Demolition of concrete (reinforced) of any description and in in any position not otherwise specifically provided for, complete all as specified and directed. | 5 | CUM | |
| 67 | 67 | M&L for 1:2:4 type B1(20mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, string courses , lacing courses, parapets and railings up to 60cm in height , copings, kneelers, apex stones, bed plates, kerbs including weathering , slightly rounded or chamfered angles and throating, as dericted . | 5 | CUM | |
| 68 | 68 | S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip | 180 | KG | |
| 69 | 69 | Supply and fix mild steel TMT bars 8 mm dia and over upto and including 10 mm dia, as in nibs, stirrups, spacers and binders etc cut to length, bend to shape as required including cranking, bending or hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. | 70 | KG |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
