Development And Retrofitting In Ig Park Itanagar, Itanagar-Arunachal Pradesh

TDR : 27817033

Tender Notice
Corrigendum Details
BOQ

Expired

Itanagar , Arunachal Pradesh

Tender Brief : Corrigendum : Development And Retrofitting In Ig Park Itanagar

Document Fees
₹ 15000 /-

EMD
₹ 3724000.0 /-

Tender Value
Refer document

Submission Date
06-07-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	21-06-2021	Corrigendum with Addendum.	Date	06-07-2021
2	12-06-2021	Corrigendum Bids Submission	Date	24-06-2021
3	11-06-2021	Corrigendum on date	Date	14-06-2021
4	20-05-2021	Corrigendum/Addendum	Date	14-06-2021

Name of Work: DEVELOPMENT AND RETROFITTING IN IG PARK ITANAGAR
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	EARTH WORK
2	2	Earth work in excavation in all kind of soils containing boulders upto 30 cm size including banking in 20 cm layers and breaking clods, ramming and dressing up for the purpose of making embankments or filling up ground depressions lead upto 50 m and lift upto 2 m. Preparing bed for Pcc As directed by Engineer in charge.		1645	cum
3	3	Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.50 m in width as well as 10 Sq.m. on plan including disposal of excavated earth lead upto 50 m and lift upto 1.50 m. Disposed soil to be levelled and neatly dressed.		656	Sqm
4	4	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50 m and lift upto 1.5 m		2235	cum
5	5	Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.		388	cum
6	6	Supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.		96	cum
7	7	Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm		66	cum
8	8	Surface dressing of the ground, including removing vegetation and inequalities not exceeding 15 cm depth and disposal of rubbish, lead upto 50 m and lift upto 1.50 m.		15867	sqm
9	9	PLAIN CEMENT CONCRETE
10	10	Providing and laying in position plain cement concrete of specified grade under foundation, bases for raft, under ground water tank, footings, under floor landing, basement flooring, below pathway, cill, coping, screeding at roof to required slope and other location as called for laid, consolidated, cured complete including finishing of top surface to receive the next course/ layer as per specification and drawing excluding the cost of cantering and shuttering 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)		1408	cum
11	11	1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)		321	cum
12	12	REINFORCED CEMENT CONCRETE:-
13	13	Providing & laying cast-in- place machine batched, Batching plant mixed & machine vibrated, design mix concrete with fly ash of specified grade for reinforced cement concrete structural element using pump with 20mm down coarse aggregates excluding cost of cantering, shuttering and steel reinforcement but including cost of making shear keys and provision of construction / contraction / control joints in various locations, laid, consolidated, cured, item to include all structural /architectural elements like base raft, ramp, column, wall, footings, equipment foundations, fins, mullions, beams, lintels, pergola, Chajja, fascia, parapet, Planters, fins, vertical projection of Balconies, cills, railing, slab, trenches, drains and sumps etc. of any shape and sizes. The rates of concrete to include the cost of admixtures / Plasticizer to achieve specified strength and to facilitate pump able concrete. \nM20 Grade Cement Concrete		54	cum
14	14	M25 Grade Cement Concrete		1346	cum
15	15	CENTERING AND SHUTTERING
16	16	Centring and shuttering for all type of work like foundation, plinth beam, column, slab, chhaja etc. including supply of all material labour ,T&P etc required for proper completion for the work as directed by engineer in charge.
17	17	Foundation, raft slabs, raft beams, plinth beam, pedestals/ bases of columns grade slab, sumps, lift pits, foundation of equipment, drain channel, Column, Slab, Beam etc.		8806	sqm
18	18	Retaining Wall		2300	Sqm
19	19	Columns, Pillars, Piers, Abutments, Posts and Struts		1200	Sqm
20	20	Lintels, beams, plinth beams, girders, bressumers and\ncantilevers		1229	Sqm
21	21	Suspended floors, roofs, landings, balconies and access\nplatform		676	Sqm
22	22	ANCHOR BOLT FOUNDATION
23	23	Providing and laying in Cement concrete M-20 (1 Cement : 1.5 approved Coarse sand : 3 Coarse Aggregate ) grade in foundation. Anchor rod/bolt 16mm dia, 200mm length with base plate 10mm thick as per directed by engineer in charge cost including excavation, back filling, all complete includind material,labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge.\nSize (600x600x450)mm3		30	Each
24	24	Size (450x450x300)mm3		69	Each
25	25	REINFORCEMENT STEEL
26	26	Providing & Laying and fixing in position steel reinforcement in all reinforced concrete work, including straightening, cutting, removal of loose rust by wire brush and coating with cement slurry, PVC Cover Block, bending, hoisting, laying in position to the shape and profile required at all levels and heights as per drawing and design and/ or as directed, binding with 18 gauge MS annealed wire etc. complete.
27	27	Thermo mechanically Treated Reinforcement (TMT and / or High yield strength Deformed) bars of all grades Fe 415 / Fe 500 / plain MS steel bars		114	ton
28	28	WATER PROOFING COMPOUND
29	29	Providing and mixing water proofing compound of approved make or as per approved manufacturer in cement concrete work etc in the proportion as recommended by the manufacturers. Conform by Engineer in charge.		65	kg
30	30	BRICK WORK
31	31	Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).		344	cum
32	32	Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge.		870	cum
33	33	Providing and laying 150 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with sand, including finishing smooth etc. complete as per direction of Engineer-in-charge.		930	cum
34	34	DOORS AND WINDOWS
35	35	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
36	36	30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws		143	sqm
37	37	Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001 (Part B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).		5.24002	cum
38	38	Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge
39	39	Extruded section profile size 42x50 mm		1772	mtr
40	40	Providing and fixing glazing in uPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of uPVE frame, snap beading shall be paid in basic item):
41	41	With Toughened glass panes of 6 mm thickness.		284	sqm
42	42	Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately).		7	sqm
43	43	Providing and fixing aluminium round shape handle of outer dia 100 mm with SSscrews etc. complete as per direction of Engineer-in-Charge.		136	each
44	44	Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete as per IS 1868.
45	45	150 x 10 mm		115	each
46	46	Providing and fixing bright finished brass hanging type floor door stopper\nwith necessary screws, etc. complete.		62	each
47	47	Providing and fixing chromium plated bright finished 100 mm mortice latch and lock with 6 levers and a pair of CP handles with necessary screws etc complete (best make of approved quality).		136	each
48	48	STEEL STRUCTURE
49	49	Providing and fixing M.S such as I-section, Channel, angle, Flat, Plate etc conforming to IS: 2062, IS: 808 & SP (6)- 1964 connected with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, painting,hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental changes such as electricity charges, labour insurance charges etc.		185214	kg
50	50	ROLLING SHUTTER
51	51	Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm MS laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of the top cover and spring.		5.175	sqm
52	52	Providing and fixing top cover for rolling shutters.		5	mt
53	53	Providing and fixing ball bearing for rolling shutters.		6	each
54	54	Providing and fixing 27.5 cm long wire spring grade No. 2 for rolling shutters		6	each
55	55	CONCRETE FLOORING
56	56	62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.		97.9735	sqm
57	57	SUPPLY AND INSTLLATION OF TEAK WOOD FLOOR		1320	Sqm
58	58	Providing and fixing glass strips in joints of terrazo/ cement concrete\nfloors.
59	59	40 mm wide and 4 mm thick		1782.15	Rmt
60	60	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm.		828	sqm
61	61	GRANITE FLOORING
62	62	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.\n
63	63	Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.\n		355	sqm
64	64	Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete		50.56	Sqm
65	65	SAND STONE
66	66	40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone.		49.18	sqm
67	67	CERAMIC TILE
68	68	Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.		226	sqm
69	69	TERRAZZO TILES
70	70	Pre-cast terrazzo tiles 20 mm thick with white, black or white and black marble chips of sizes up to 6 mm laid in floor, treads of steps and landings on 25 mm thick bed of cement mortar 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete with pre-cast tiles of :
71	71	Medium shade using approximately 50% white cement and 50% ordinary cement		167	sqm
72	72	KOTA FLOORING
73	73	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1\ncement : 4 coarse sand) :
74	74	25 mm thick		924.017	sqm
75	75	SKIRTING
76	76	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.		172	sqm
77	77	TERRAZZO TILES SKIRTING
78	78	Pre-cast terrazzo tiles 20 mm thick with marble chips of sizes upto 6 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurry including rubbing and polishing complete with tiles of :
79	79	Medium shade using approximately 50% white cement and 50% ordinary cement.		3	sqm
80	80	KOTA SKIRTING
81	81	Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.		12	sqm
82	82	SHEET ROOFING / WALLING
83	83	Providing and fixing precoated galvanised iron profile sheets (size,\nshape and pitch of corrugation as approved by Engineer-in-charge)\n0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120\ngrams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns\nepoxy primer on both side of the sheet and polyester top coat 15-18\nmicrons. Sheet should have protective guard film of 25 microns\nminimum to avoid scratches during transportation and should be\nsupplied in single length upto 12 metre or as desired by Engineerin-\ncharge. The sheet shall be fixed using self drilling /self tapping\nscrews of size (5.5x 55 mm) with EPDM seal, complete upto any\npitch in horizontal/ vertical or curved surfaces, excluding the cost of\npurlins, rafters and trusses and including cutting to size and shape\nwherever required.		2537	sqm
84	84	Providing and fixing precoated galvanised steel sheet roofing accessories\n0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams\nper sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy\nprimer on both side of the sheet and polyester top coat 15-18 microns\nusing self drilling/ self tapping screws complete :
85	85	Ridges plain (500 - 600mm)		47	sqm
86	86	Gutter (600 mm over all girth)		94	sqm
87	87	GI ROOFING
88	88	Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses.
89	89	1.0 mm thick GI sheet.		18	sqm
90	90	RAIN WATER PIPE
91	91	Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
92	92	110 mm dia		35	mt
93	93	Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
94	94	87.5 degree bend		20	each
95	95	PLASTER WORK
96	96	Providing and applying plaster to masonry and RCC walls, columns etc. in cement mortar 1:4 (1 cement : 4 fine and coarse sand in equal proportion) finished smooth including hacking the surfaces, scaffolding, curing, making grooves, chicken mesh at desired location etc. complete as per drawing.
97	97	Exterior Plaster 20 mm cement plaster 1 : 4 (1 cement : 4 fine sand)		1638	sqm
98	98	Interior Plaster 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).		3554	sqm
99	99	6 mm cement plaster to ceiling 1 : 4 (1 cement : 4 fine sand).		3818	sqm
100	100	OIL BOUND DISTEMPER
101	101	Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.including cost of preparing the surfaces with filling material (putty if required) as directed by Engineer in charge.		6097	sqm
102	102	EXTERIOR PAINT
103	103	Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
104	104	New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.		2572	sqm
105	105	PAINT WORK
106	106	Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.\n\n		49346.3	sqm
107	107	Applying priming coat with ready mixed red lead paint of approved brand and manufacture on steel work.\n		19	sqm
108	108	Painting two or more coats with synthetic enamel paint of approved brand and manufacture in black or chocolate shade on new work over and including an under coat of suitable shade with ordinary paint of approved quality to give an even shade.\n\n		19	sqm
109	109	Cement plaster cladding up to All height, with cement mortar 1:3 (1\ncement : 3 coarse sand), finished with a floating coat of neat cement. Complete.\n
110	110	18 mm Thick		93	sqm
111	111	Granular Sub-Base with Coarse Graded Material ( Table:- 400- 2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401)
112	112	for grading- I Material Thickness 100mm		660	cum
113	113	Providing and laying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.30 Kg. Per sqm on the prepared bitumenous surface cleaned with mechanical broom.
114	114	Dense Graded Bituminous Macadam\n		6600	sqm
115	115	Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects).
116	116	for (19 mm nominal size) 40mm thick		264	cum
117	117	KERB STONE
118	118	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin-charge).
119	119	Kerb Stone (600x400x100)MM Drain Side		111	cum
120	120	PAVER BLOCK
121	121	Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
122	122	60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.\n		425	sqm
123	123	TURF PAVER
124	124	Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge.		398	sqm
125	125	SANITARY WORK_WATER CLOSET
126	126	Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.		50	each
127	127	URINAL
128	128	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required.
129	129	One urinal basin with 5 Litres CI automatic flushing cistern Water Supply		20	each
130	130	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required.
131	131	Range of three urinals with 12.5 Litre CI automatic flushing cistern		4	Each
132	132	Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
133	133	Flat back wash basin size 550x400 mm with single 15 mm CP brass pillar taps of heavy quality.		34	each
134	134	Providing and fixing toilet paper holder.CP Brass		14	each
135	135	Providing and fixing brass bib cock of approved quality.
136	136	20 mm nominal bore		40	each
137	137	15 mm nominal bore		20	each
138	138	Providing and fixing Press bib cock of approved quality for Drinking Water fountain
139	139	15 mm nominal bore		6	each
140	140	Providing and fixing brass full way valve with wheel of approved quality.
141	141	32 mm nominal bore		15	each
142	142	40mm nominal bore		1	Each
143	143	50mm nominal bore		1	Each
144	144	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.		6	Each
145	145	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
146	146	Kitchen sink with drain board
147	147	510x1040 mm bowl depth 250 mm		1	Each
148	148	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
149	149	15 MM Nominal Bore		39	Each
150	150	Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
151	151	15 mm nominal dia		4	Each
152	152	Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with CP brass screws and washers.In Basin area\n\n		8	each
153	153	Providing and fixing a pair of white vitreous china foot rest of standard pattern for squatting pan WC.\n		24	Each
154	154	Providing and fixing CP brass shower rose with 15 mm or 20 mm dia inlet.
155	155	100mm Dia		16	each
156	156	Providing and fixing normal gauge HD polythene pipes of approved quality complete with appropriate fittings including cutting and making good walls etc (internal work).
157	157	25 mm nominal bore		555	mt
158	158	Providing and fixing CP Brass or MI trap for wash basin and sinks.
159	159	32 mm Dia		56	each
160	160	Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.		55	each
161	161	Providing and fixing in position 32 mm dia galvanized steel telescopic flush pipe complete including cutting and making good the walls and floors.		26	each
162	162	Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality).		17	each
163	163	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
164	164	Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg\n(weight of cover 23 kg and weight of frame 15 kg)
165	165	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5\n		8	each
166	166	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :\n\n\n
167	167	250 mm dia. R.C.C. pipe		95	mt
168	168	Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
169	169	With common burnt clay F.P.S.(non modular) bricks of class designation 7.5		10	each
170	170	WATER SUPPLY SYSTEM (Internal & External)
171	171	Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
172	172	15 mm dia nominal bore		60	Metre
173	173	20 mm dia nominal bore		93	Metre
174	174	25 mm dia nominal bore		107	Metre
175	175	32 mm dia nominal bore		73	Metre
176	176	40 mm dia nominal bore		47	Metre
177	177	50 mm dia nominal bore		33	Metre
178	178	Providing and fixing ball valve (brass) of approved quality complete.
179	179	High pressure with copper floats
180	180	25 mm dia nominal bore		8	Each
181	181	Providing and fixing C.I. butterfly valves , wafer end type class PN 1.0 as per I.S:13095 or BS:5155, including necessary nuts, bolts, gaskets, flanges etc., complete.
182	182	32mm nominal bore		2	Each
183	183	40mm nominal bore		1	Each
184	184	50mm nominal bore		1	Each
185	185	Providing and fixing 25mm dia. C.I. air release valve, single acting including the cost of all pipes and fittings as per standard design and site conditions complete in all respects, (excluding the ball valve).		1	Each
186	186	Providing and fixing electrical solenoid valves for min. working pressure of 6 to 10 kg/cm2, complete with all necessary accessories and electrical devices.
187	187	50 mm dia.		1	Nos
188	188	25 mm dia.		1	Nos
189	189	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
190	190	25 to 40 mm nominal bore		1	Each
191	191	Fixing water meter and stop cock in G.I. pipe line including cutting and\nthreading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).		2	Each
192	192	WATER SUPPLY SYSTEM (External)
193	193	Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work)
194	194	25 mm dia nominal bore		530	Metre
195	195	32 mm dia nominal bore		100	Metre
196	196	40 mm dia nominal bore		1000	Metre
197	197	50 mm dia nominal bore		225	Metre
198	198	80 mm dia nominal bore		65	Metre
199	199	Painting GI pipes and fitting with two coats of anti corrosive bitumastic paint of approved qualtiy. (external work)
200	200	25 mm dia nominal bore		530	Metre
201	201	32 mm dia nominal bore		100	Metre
202	202	40 mm dia nominal bore		1000	Metre
203	203	50 mm dia nominal bore		225	Metre
204	204	80 mm dia nominal bore		65	Metre
205	205	Providing and filling sand all round GI pipes in external work.
206	206	25 mm dia nominal bore		530	Metre
207	207	32 mm dia nominal bore		100	Metre
208	208	40 mm dia nominal bore		1000	Metre
209	209	50 mm dia nominal bore		225	Metre
210	210	80 mm dia nominal bore		65	Metre
211	211	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.		36000	liter
212	212	SEWERAGE & DRAINAGE SYSTEM
213	213	Excavation of trenches of required width for pipes, including dressing of sides, ramming of bottom, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cms depth including consolidating each deposited layers by ramming, watering, etc. and disposing of surplus excavated soil as directed outside the site to the approved dumping ground.
214	214	In all kind of soils
215	215	Pipes exceeding 100mm dia but not exceeding 300mm dia.		50	Metre
216	216	Providing and Layng light duty non-pressure NP2 Class RCC pipes with\ncollars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 Cement : 2 fine sand) including testing joints etc complete.
217	217	150 mm dia RCC Pipes (NP2)		50	Metre
218	218	Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
219	219	180x150 mm size P type
220	220	With Sewer bricks conforming to IS : 4885		4	Each
221	221	Constructing brick masonry Road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design :
222	222	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5		7	Each
223	223	Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
224	224	For pipes 100 to 250 mm diameter		5	Each
225	225	Provision for making Septic Tank & Soak Pit		3	Each
226	226	SOIL, WASTE, VENT AND RAIN WATER PIPES & FITTINGS
227	227	Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.
228	228	100 mm dia		190	Metre
229	229	50 mm dia		70	Metre
230	230	Providing and fixing in position 25 mm dia mosquito proof coupling of approved municipal design.		11	Each
231	231	Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand).
232	232	100 mm diameter pipe		60	Metre
233	233	Providing and fixing sand cast iron trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.
234	234	100 mm inlet and 100 mm outlet		17	Each
235	235	Providing and fixing UPVC floor drain consisting of 110x63mm I elbow (grating and pipe to be paid separately), complete as per instructions.		10	Each
236	236	Providing and fixing cast brass Clean Out plug (FCO & COP) with suitable insert keys for opening, male threaded joint with socket complete in all respects.
237	237	100mm dia		13	Each
238	238	STRUCTURAL GLAZING IN CLADDING/ROOFING
239	239	supplying and Installing structural glazed curtain wall system Design, Fabrication, Supply, installation, Testing ,protection, cleaning handover of Aluminium composite cladding structure glazing work with toughened glass all Complete of approved make in solid or metallic colours as per architect's approval .Using grid work of prefabricated aluminium extruded sections to with stand the design wind pressure confirming to IS -875 part III. (The system must pass the proof test at 1.5 times design wind pressure). The fastening brackets of Aluminium alloy 6005 T5 /MS with HDG with serrations and serrated washers to arrest the wind load movement, fasteners and anchor bolts of approved make in SS 316.		93	sqm
240	240	supplying and Installing roofing system Design, Fabrication, Testing ,protection, cleaning handover of Aluminium composite glazing work with toughened glass all Complete of approved make in solid or metallic colours as per architect's approval .Using grid work of prefabricated aluminium extruded sections to with stand the design wind pressure confirming to IS -875 part III. (The system must pass the proof test at 1.5 times design wind pressure). The fastening brackets of Aluminium alloy 6005 T5 /MS with HDG with serrations and serrated washers to arrest the wind load movement, fasteners and anchor bolts of approved make in SS 316.		317	sqm
241	241	FALSE CEILING
242	242	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
243	243	12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks)		504	sqm
244	244	BRICK BAT COBA WATERPROOFING
245	245	Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick.
246	246	The item also include providing and making khurrahs 450mm x 450mm with average minimum thickness of 50mm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) finished with aluminum foil and 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete. (Plan area will be measured and paid)		244	sqm
247	247	WATER PROOFING
248	248	Providing and mixing integral crystalline admixture for waterproofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc.. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer’s specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.		331	sqm
249	249	Providing and making Khurras with average minimum thickness of 5cm Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 mm nominal size) over PVC sheet 1 m x 1 m (PVC 400 microns min. thickness), finished with 12mm Cement Plaster 1:3 (1 Cement : 3 Coarse Sand, admixed with waterproofing compound) and a coat of neat cement, rounding the edges and making & finishing the outlet complete.
250	250	Khurra Size 450 x 450mm, for 150mm dia outlet with 5mm thick circular/square vertical C.I grating.		3	Each
251	251	ELECTRICAL WORK
252	252	Wiring for exhaust fan plug with 1.5 sqmm 1100V FRLS PVC insulated, multistranded copper conductor wire in recessed / surface 25 mm dia, 2mm thick PVC conduit including cost of cutting and filling chases as required with fixing of plate 1 mm thick GI box, modular type switch socket (6A 240V) and earthing complete with all accessories as required		47	point
253	253	10 Watt Tube light/LED Downlight as directed by Engineer in charge.		34	nos.
254	254	LED wall Bracket Light as per Engineer in charge.		64	nos.
255	255	INTERNAL WIRING:
256	256	Wiring for light point/call bell point with 1.5 sqmm FRLS PVC insulated, 1100 V grade stranded copper conductor wire in recessed / surface rigid 25 mm dia, 2 mm thick PVC conduit including cost of cutting & filling chases as required with providing & fixing of modular switches/bell push (6A, single pole, 240 V), plate, 1 mm thick GI box, and earthing with 1.5 Sqmm PVC insulated green copper wire complete with all accessories as required . The cost of circuit wiring with 2 x 2.5 Sqmm + 1 x 1.5 Sqmm PVC insulated copper conductor 1100 Volts grade wires shall be included in the cost of point wiring.
257	257	With MCB Control
258	258	First Point		21	point
259	259	Loop Point		60	point
260	260	Supply, installation , testing & commissioning of 240 V single phase, 200 mm sweep exhaust fans with 1.5 Sqmm insulated cu conductor wirs for connections completed. (Toitet Exhaust)		36	nos.
261	261	Supplying and fixing of Volcano Jet suitable for water effect to achieve height of 4-6 mtr. high (Color Design India/Oase/Wetdesign make) as per entire instruction, direction and satisfaction of Engineer-in-charge.		7	set
262	262	Supplying and Fixing of 50mm dia. Gunmetal Ball Valve (Make Zoloto/Sant/Leader/Arch) complete as per per the direction and entire satisfaction of Engineer in Charge		7	nos.
263	263	Supplying installation testing and commissioning of horizontal monoset submersible Pump Set with totally enclosed water filled squirrel cage induction motor water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation Suitable for three phase 50 HZ AC supply as per direction, instruction and entire satisfaction of Engineer-in-charge. \nMotor Body : CI\nPump Body : CI\nMake : Kirlosker/Crompton or equivalent\nCapacity : 15 HP Three Phase\nDischarge 35.5 LPS\nHead 16 Mtr\nSuction & Delivery 100x100mm		7	set
264	264	Supplying installation testing and commissioning of horizontal monoset submersible Pump Set with totally enclosed water filled squirrel cage induction motor water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation Suitable for three phase 50 HZ AC supply as per direction, instruction and entire satisfaction of Engineer-in-charge. (Working 1 + Standby 1)\nMotor Body : CI\nPump Body : CI\nMake : Kirlosker/Crompton or equivalent\nCapacity : 7.5 HP Three Phase\nDischarge 27 LPS\nHead 12 Mtr\nSuction & Delivery 100x100mm		2	set
265	265	Supply & Fixing water proof high power LED lights 18x3 watts=54watt, color changing RGB/Multicolor made out of stainless steel 304gr. top with Zinc Alloy base suitable to be fitted with emitter type power LED's with all in one optical lens of 85% effeciency step pempered glass 8 mm with protection class of IP-68. (Color Design India/Oase/Wetdesign make) complete as per the direction & entire satisfaction of Engineer in charge.		56	each
266	266	Supply and fixing of Load Circuit for LED Lights Make- (Color Design India/Oase/Wetdesign make) Output Power - 12V DC		7	each
267	267	Supply and fixing of Power Supply/SMPS for LED Lights, Body - Metal\nInput Power - 220V AC\nOutput Power - 12V DC - 40 amp.\nMake : - (Color Design India/Oase/Wetdesign make)		11	each
268	268	Supply and fixing Stainless Steel 304 grade enclosure to assamble Pump, Nozzle, Lights & Fittings in Anti-Theft type arrangement complete as required having size of 900mm dia. circular shape (Color Design India/Oase/Wetdesign make) complete as per the direction & entire satisfaction of Engineer in charge.		7	set
269	269	Supplying and Laying submersible flat/round cables PVC insulated PVC sheathed copper conductor of make Polycab/Finolex/National/Kalinga complete as per the direction & entire satisfaction of Engineer in charge.
270	270	3 core x 6.0 sq mm size		550	mt
271	271	4 core x 2.5 sq mm size		750	mt
272	272	2 core x 2.5 sq mm size		350	mt
273	273	Supplying and fixing of Aluminum conductor Armoured cable, XLPE Insulated, cores laid up, PVC tape/Extruded Innersheathed for Multicore Cables, extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7098(Part 1) 1988, Make - Havells/Polycab or equivalant.
274	274	4 core x 50.0 sq mm size		100	mt
275	275	Supplying and fixing PVC Medium Class conduit pipe for concealing of Cables, make Kalinga/AKG/ISI Mark complete as per the direction & entire satisfaction of Engineer in charge.
276	276	25 mm dia. size.		300	mt
277	277	40 mm dia. size.		50	mt
278	278	Supplying and Making water Proof joint of underwater cables for submersible cable complete as per direction, instruction and entire satisfaction of Engineer-in-charge		86	nos.
279	279	Supplying and Fixing of UPVC pipes (10 Kg/cm2) of make Prince/Supreme/Prakash or equivalent confirming to IS 4985:2000 including all UPVC fitting i/c jointing with good quality solvent of following sizes. All fixing to be done to the entire satisfaction and sample approved by Engineer-incharge.
280	280	110 mm OD Pipe		36	mt
281	281	63 mm OD Pipe		84	mt
282	282	50 mm OD Pipe		138	mt
283	283	PARK LAYOUT MAP
284	284	Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).
285	285	Overhead informatory for park LayoutMap and Bilboard.		10	sqm
286	286	Supply and instllation of Mini boxing ring size - 5M x 5M x 1M		1	each
287	287	Supply and Installation of Net & Poles for batminton		4	each
288	288	Judo mats (where 40 mm E.P. form & 10 mm J.S.R rubber mixed) with		32	each
289	289	Supply and Installation of Net & Poles for tannes		1	each
290	290	Supply and Installation of Poles for basketball		1	each
291	291	Supply and Installation of Net & Poles for vollyball		1	each
292	292	Sand Filling in existing playground to prevent injury pea gravels (1 mm sieve size) as per Drawing & Technical Specification as directed by Engineer in charge.\n		291	cum
293	293	Multi-Play System-I		1	No
294	294	Multi-Play System-II		1	No
295	295	Multi-Play System-III		1	No
296	296	Multi-Play System-IV		1	No
297	297	Merry Go Round (Inclusive)		1	No
298	298	Swing Set (2 seater with 1 bucket seat)		2	No
299	299	Spring See Saw		2	No
300	300	Monkey Bars		2	No
301	301	Parallel Bars		2	No
302	302	Supplying and Fixing of UPVC pipes (6 Kg/cm2) of make Prince/Supreme/Prakash or equivalent confirming to IS 4985:2000 including all UPVC fitting i/c jointing with good quality solvent of following sizes. All fixing to be done to the entire satisfaction and sample approved by Engineer-incharge.
303	303	90 mm OD Pipe		70	mt
304	304	63 mm OD Pipe		60	mt
305	305	Supplying and Fixing of UPVC pipes (20 Kg/cm2) of make Prince/Supreme/Prakash or equivalent confirming to IS 4985:2000 including all UPVC fitting i/c jointing with good quality solvent of following sizes. All fixing to be done to the entire satisfaction and sample approved by Engineer-incharge.
306	306	32 mm OD Pipe		24	mt
307	307	Supplying and fixing of Non retrun Valve and accessories complete (Zoloto/Sant/Leader make) as required & as per entire satisfaction & sample approved of Engineer in Charge.
308	308	100 mm size		10	nos.
309	309	Supplying and fixing of Stainless Steel 304grade Sump Cover having size of 2.20mtr X 2.20mtr. Square shape including cutting fixing/welding complete. All fixing to be done as per direction, instruction and entire satisfaction of Engineer-in-charge.		7	each
310	310	Supplying and fixing of Stainless Steel 304grade LED Light housing having size of 0.2mtr dia. including cutting fixing/welding complete. All fixing to be done as per direction, instruction and entire satisfaction of Engineer-in-charge.		28	each
311	311	Supplying installation, testing and commissioning of out door type enclosure panel for provision of smps fixing of near waterbody. The panel enclosure shall be made out of 16 SWG CRC sheet in grey color and shall be floor mounted with following, Body Size: 300(W)x300(H)x200(D).		7	each
312	312	Supplying and fixing of inlet connection from main delivery line to each waterbody complete. All fixing to be done as per direction, instruction and entire satisfaction of Engineer-in-charge.		7	each
313	313	Supplying and fixing of Drain connection from Sump to outer side each waterbody. All fixing to be done as per direction, instruction and entire satisfaction of Engineer-in-charge.		7	each
314	314	ELECTRICAL PANEL FOR 7 UNITS.
315	315	Supplying installation, testing and commissioning of out door type control panel suitable for fountain equipment including wiring, cabling, cable tray control wiring etc. The control panel shall be compartalized for individual outgoing and shall be made out of 16 SWG CRC sheet in grey color and shall be wall mounted with following, \nBody Size: 1300(W)x1200(H)x300(D).\n(a) Main Incomer 250A 50kA 4 Pole MCCB 1.00 no. (L&T/BCH/Havells make)\n(b) 3 Pole MCB 63 Amps 6.00 nos. (L&T/Havells/Indocopp make)\n(c) SP MCB 6 Amps 6.00 nos. (L&T/Havells/Indocopp make)\n(d) DP MCB 16 Amp 6.00 nos. (L&T/Havells/Indocopp make)\n(e) Single Phase Preventer 6.00 nos. (L&T/Havells/Minilec make)\n(f) Volt selector switch 1.00 no. (L&T/AE make)\n(g) Voltmeter 0-500 v 1.00 no. (L&T/AE make)\n(h) Ammeter 0-50 amps 6.00 nos. (L&T/AE make)\n(i) Overload relay 30 - 50 Amp. 6.00 nos. (L&T/BCH/Havells make)\n(k) TPN Power Contractors MNX-32.00 6.00 nos. (L&T/BCH/Havells make)\n(l) Star Delta Timer 6.00 nos. (L&T/BCH/Havells make)\n(m) Indicators - 6.00 sets (EESBEE/Rishabh/L&T make)\n(n) Start/Stop Push Button assembly 6.00 sets (L&T/EESBEE make)		1	each
316	316	Supply & Fixing of DCC Master Control Device for LED Lights having Specifications:- \n* PIC based controller with master & slave communication protocol.\n* Push feature to lock any running colour chase to a fix colour.\n* 24 Pre-Programmed colour patterns and Load Circuit-Inbuilt with accessories complete, Body - Plastic/PVC, Output Power - 12V DC, Make : - (Color Design India/Wetdesign/Oase make) complete as per the direction & entire satisfaction of Engineer in charge.		1	each
317	317	BUBBLER STREAM JET FOUNTAIN WITH LED LIGHTS- 16 NOS..
318	318	Supplying and fixing of 25 mm dia Bubbler Stream jet nozzle in gun metal/brass (Colour Design India/Oase/H2O make) etc complete as per the direction & entire satisfaction of Engineer in charge.		16	each
319	319	Supply & Fixing 25 mm dia universal couplings for fixing nozzles in GM construction complete as required (Colour Design India/Oase/H2O make) etc complete as per the direction & entire satisfaction of Engineer in charge.		16	each
320	320	Supplying and fixing 25mm dia gun metal Ball valve with accessories complete as required (Body & seat test pressure 500 psig.hyd) (Zoloto/Sant/Leader/Arch make) as per the direction and entire satifsfaction of Engineer in charge.		16	each
321	321	Supplying and fixing 40mm dia gun metal Ball valve with accessories complete as required (Body & seat test pressure 500 psig.hyd) (Zoloto/Sant/Leader/Arch make) as per the direction and entire satifsfaction of Engineer in charge.		4	each
322	322	Supply & Fixing water proof high power LED lights 6x3 watts=18watt, colour changing RGB/Multicolour made out of stainless steel 304gr. suitable to be fitted with emitter type power LED's with all in one optical lens of 85% efficiency step pampered glass 8 mm with protection class of IP-68. (Colour Design India/Oase/H2O make) complete as per the direction & entire satisfaction of Engineer in charge.		16	each
323	323	Supplying and fixing of CI Butterfly Valve of pressure rating PN1.6 with EPDM rubber lining matching flanges and accessories complete short pattern as required (Kirloskar/leader/Zoloto/Sant) as per per the direction and entire satisfaction of Engineer in Charge.
324	324	100 mm size		3	each
325	325	Supplying and fixing of Stainless Steel 304 grade Sump Cover in size of 1000x1500mm for Submersible Pumps (Colour Design India/Oase/H2O make) etc complete as per the direction & entire satisfaction of Engineer in charge.		2	each
326	326	Supplying and 100mm dia. Debris Collection Strainers in Stainless Steel 304 grade complete as per the direction & entire satisfaction of Engineer in charge.		3	each
327	327	Supply and fixing of Manifold made out of Stainless Steel 304 gr.in size of 150mm Dia and 1200 mm in Length complete as per the direction & entire satisfaction of Engineer in charge.		1	each
328	328	ELECTRICAL WORK
329	329	Supply, installation, testing & commissioning of following Double door MCB Distribution boards as per drawing & specification fabricated out with 18 SWG CRCA sheet steel in compartmentalized design as per specification and drawings these distribution boards shall be surface/ recessed in walls. The rate includes the painting, ferruling of circuit wires, earthing etc. as required.\n\ni) Distribution Board (3Phase 6 WAY TPN)\nii)(LPDB)\niii)Incoming (1 No.:\niv)25A MCB C-curve (10KA)\nv)Outgoing:\nvi)8 Nos. 6/10/16A SP MCB C-curve (10kA).\nvii)Busbar:\nviii)100A TPN copper bus bar\nix)Neutral link:\nx)Separate for each phsase.\nxi)Earthing: as is-3043\nxii)Suitable for 8 Nos. outgoing.\n		5	nos.
330	330	FIRE PUMP & EQUIPMENT
331	331	The rate includes interconnecting cables, foundations & foundation bolts\ni)Pump capacity - 2280 LPM\nii)Head - 50 m \niii)RPM - 2900\niv)Supply of Electrically driven pump described above (including all necessary/required accessories)		1	Set
332	332	Fixing, testing, installation and commissiong (including consumable items) of the above described\ni)The rate includes interconnecting cables, foundations & foundation bolts\nii)Pump capacity - 2280 LPM\niii)Head - 50 m \niv)RPM - 1500		1	Set
333	333	Supply of diesel driven pump described above (including all necessary/required accessories)		3	Set
334	334	Fixing, testing, installation and commissiong (including consumable items) of the above described.\ni)The rate includes interconnecting cables, foundations & foundation bolts\nii)For pump defined above & of duty as follows :\niii)Jockey Pump\niv)Capacity - 180 LPM\nv)Head - 50 m\nvi)RPM - 2900		2	Set
335	335	Supply of jockey pump described above (including all necessary/required accessories)		3	Set
336	336	Fixing, testing, installation and commissiong (including consumable items) of the above described		2	Set
337	337	Terrace Pump:(Multi stage)Providing and fixing multi stage horizontal centrifugal pump with volute brozne impeller conntected to TEFC induction motor suitable for 400/410 Volts, 3 Phase, 50 Cycles , AC supply with the following specifications:\na. Capacity : 450 lpm\nb. Head : 35 m.\nc. HP : 10 HP approx. or As required.\nd. RPM : 2900 \ne. Mover : Electric Motor driven\nf. Material of Construction:\ng. Shaft & Sleeve : S.S. 410\nh. Impeller : Bronze\ni. Bearing : Grease lubricated\nj. Seal : Mechanical Seal(Make-Flow guard,\nk. Leak proof,Burgman)\nl. Quantity :		1	Each
338	338	Air Vessel for Fire Pump:\nFixing of air vessel of the following.\nspecifications\na. Diameter : 200 mm\nb. Shell Thickness: 8 mm\nc. Dish Ends : 10 mm\nd. Height : 1000 mm\ne. Finishing: Two coats of red enamal\n paint over primer out side and two\n coats of epoxy coating inside.\nf. Material of construction: M.S\ng. Test Pressure: 26 Kg/Sq.Cm.\ni. Height of supporting legs: 400 mm\nj. Quantity		1	Each
339	339	Note: Contractor should submit general arrangement drawings before fabrication of vessel and ultrosonic test report to be submitted on supply of vessel and test to be conducted at the presence of Plumbing-In-Charge.
340	340	Providing and fixing arch vibration elimination pads for pumps ,including bolting to foundations.
341	341	Type 'A' (For Terrace Pumps)		1	Nos
342	342	Providing and fixing dual type pressure switch suitable for 1-20 Kg/cm2 including electrical connections setting of Cut-In and cut-Off pressure complete in all respects.(For Terrace Pumps)		2	Nos
343	343	Supply, installation, testing and commissioning of Pressure switch of approved make for Hydrant pump, Sprinkler pump, jockey pumps, Diesel Engine Driven pump and Fire water curtain Pump including necessary wiring and cut off valve up to central panel & other material as described in specifications.		2	nos
344	344	Providing, fixing, testing and commissioning of precharged air vessel (size 450 mm dia & 2000 mm height) for pressurization of hydrant / sprinkler system complete with adequate pressure switches (as per design / requirement) with valves to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, minimum 50 mm dia inlet with isolating valve duly painted from inside and outside with two coats of synthetic enamel paint over a coat of primer complete as required. (Vessel should be suitable for rated working pressure).		2	Each
345	345	Providing, fixing, testing and commissioning of heavy class MS pipe, IS : 1239 marked with all necessary fittings like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc. welded or screwed joints as required including fixing the pipe with necessary structural supports including painting of two coats of synthetic enamel paint over two coats of red oxide primer including all civil breakages and making good the same (Location: Plant room).
346	346	Supply of below items (including all necessary/required accessories)
347	347	65 mm dia		20	RM
348	348	80 mm dia		20	RM
349	349	100 mm dia		20	RM
350	350	150 mm dia		80	RM
351	351	Fixing, testing, installation and commissiong (including consumable items) of the below items
352	352	65 mm dia		20	RM
353	353	80 mm dia		20	RM
354	354	100 mm dia		20	RM
355	355	150 mm dia		80	RM
356	356	Providing, fixing, testing & commissioning of heavy class MS pipe, IS : 3589 marked with all necessary fittings like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc. welded or screwed joints as required including fixing the pipe with necessary structural supports (for delivery/suction manifold relating to the pumps) including painting of two coats of synthetic enamel paint over two coats of red oxide primer including all civil breakages and making good the same [ Location : Plant room].
357	357	Supply of below items (including all necessary/required accessories)
358	358	200 mm dia (6 mm thick) with necessary supports etc. as required.		20	RM
359	359	250 mm dia (6 mm thick) with necessary supports etc. as required.		20	RM
360	360	Fixing, testing, installation and commissiong (including consumable items) of the below items
361	361	200 mm dia (6 mm thick) with necessary supports etc. as required.		20	RM
362	362	250 mm dia (6 mm thick) with necessary supports etc. as required.		20	RM
363	363	Providing & fixing butterfly valve (Body : Grey Cast Iron, Shaft : SS, Disc : SG Iron (Rilson coated), Liner : HT - EPDM) (upto 150mm dia with hand lever operation & above with gear box operation) witha a working pressure not less than 16 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers & painting complete as required.
364	364	250 mm dia (Gear operated)		2	Each
365	365	200 mm dia (Gear operated)		6	Each
366	366	150 mm dia		8	Each
367	367	100 mm dia		2	Each
368	368	80 mm dia		3	Each
369	369	65 mm dia		1	Each
370	370	Providing, fixing, testing & commissioning of dual plate non-return valve complete with nuts, bolts and washers.
371	371	250 mm dia		2	Each
372	372	150 mm dia		4	Each
373	373	100 mm dia		7	Each
374	374	80 mm dia		1	Each
375	375	Providing & fixing C.I. `Y' Strainer (screwed/ flanged) with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as required (on pump suction).
376	376	200 mm		2	Each
377	377	Providing and fixing heavy duty floating flange EPDM rubber expansion joint with unit control (tie rod & gusset plate) as per manufacturers specifications of standard length complete with all accessories and a working pressure not less than 16 Kg./sqcm including rubber gaskets, flanges, nuts, bolts & washers complete as required.
378	378	80 mm dia		3	No.
379	379	150 mm dia		8	No.
380	380	200 mm dia		8	No.
381	381	Providing & Fixing of burden type Stainless Steel dial type pressure gauge with brass isolation valve and pipe. (In Pump Room)
382	382	Dial Diameter : 100 mm		4	No.
383	383	Caliberation : 0-10 Kg/cm2\nNote: All valves shall be of PN16 rating
384	384	Providing and fixing exhaust, Diesel engine driven pump exhaust M. S. pipe class 'B' of suitable dia for the engine ncluding fitting like flanges, bends, reducers, etc. The pipe shall be provided with 12 mm thick supercera ceramic fibre rope, 21 gauge, necessary excavation, fixing of silencer connections at engine exhaust, necessary supports, back filling, cutting and making good, bird proof and weather proof flap complete in all respect as directed.		70	RM
385	385	FIRE HYDRANT SYSTEM
386	386	Providing, laying, jointing and testing in trenches the following sizes of MS class `C' (heavy duty) pipes conforming to IS:1239 with accessories like orifice plate(of required dia), fittings including tees, elbows, reducers, flanges, rubber gaskets, GI nuts, bolts and washers including excavation in all kind of soil, refilling, ramming, removing the excavated surplus material, providing adequate support to the pipe and making good the same complete as required. Rate shall include for dewatering necessary to execute the work. The pipe shall not be less than 1.0 m below ground level at any point. Pipes shall be embedded all around 150mm thick compacted silver sand and providing protection to embedded MS pipes and fittings by applying pyp kote primer (@ 100 gm/sqm) thereafter wrapping 4 mm thick pyp kote (AW 4 mm) protection coating by thermo fusion process. Overlap shall be maintained at 15 mm. The application process shall be strictly according to manufacturer’s specification.
387	387	Supply of below items (including all necessary/required accessories)
388	388	150 mm dia		110	RM
389	389	Fixing, testing, installation and commissiong (including consumable items) of the below items
390	390	150 mm dia		110	RM
391	391	Providing, laying, jointing, testing and commissioning of following sizes of MS 'C' Class (Heavy duty) pipes conforming to IS-1239 with all accessories like orifice plate(of required dia), all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer,two coats of synthetic enamel pain including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. G.I. pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s / Consultants requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects. All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head. \nWelding of any kind on the galvanized support / hanger shall not be permitted including synthetic enamel paint of approved shade over a coat of zinc primer.
392	392	Note: Pipe upto 50 mm dia shall be threaded joints, above 50 mm shall be welded joints.
393	393	Supply & Fixing of below items (including all necessary/required accessories)
394	394	25 mm dia		6	RM
395	395	100 mm dia		70	RM
396	396	Providing & Fixing of wall mounting swinging type first aid fire hose reel with drum, hanging bracket, 36.5 Mtr. length x 20 mm dia high pressure hose reel tubing as per IS: 444 with gun metal (GM) shut off nozzle having 5 mm dia orifice. The hose reel shall be conforming to IS : 884-1985. Rate shall include 25 mm dia M.S. pipe connection from Riser to hose reel, sockets, nipples, elbows and ball valve (25 mm dia). Drum shall be fixed on adjoining wall through anchor fasteners / cement concrete block as and when required. (For internal hydrant system).		2	Each
397	397	Providing & Fixing of Stanless steel four way fire brigade tank inlet connection having 63 mm dia instantaneous type inlet and 150 mm dia flange outlet conforming to IS:904 with blank cap and chain with necessary 150 mm dia MS (heavy duty) pipe and flanges, nuts, bolts etc. Cost shall include a wall mounted box of M.S. construction (16 SWG) with glass door (4.0 mm thick) to house the above mentioned component complete in all respect. (For Tank Filling).		1	Each
398	398	Providing & Fixing of 150mm dia stanless steel l fire brigade suction hose coupling of (gunmetal draw off connection) with 150 mm dia M.S. 'C’ Class suction pipe with 100mm dia C.I. foot valve. (Pipe max. 10m long). Cost shall include a wall mounted box of M.S. construction (16 SWG) with glass door (4.0mm thick) to house the above mentioned component in all respect. (To be connected to static water tank)		3	Each
399	399	Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels etc.) including cutting to size, drilling, welding, including cost of fasteners, clamps in RCC structural members as directed, including two or more coats of synthetic paint over one coat of primer after surface preparation including cutting and making good walls.		110	Kg
400	400	Providing & fixing Stanless steel fire hydrant single headed landing valve with 80 NB flanged inlet, brass spindle controlled 63 mm dia female instantaneous outlet type. SS coupling, blank cap, chain, twist release type lug & all accessories. Conforming to IS standard. Including fixing with anchor fastner and flanged tapping from wet riser and providing pressure gauge with gun metal ball valve complete as required.		2	Each
401	401	Providing & Fixing of 63 mm dia 15 m long non-percolating flexible hose (RRL- type A) as per IS : 636. Type A with stanless steel & female instantaneous type coupling (IS 903) (For internal hydrant system).		2	Each
402	402	Providing and Fixing stanless steel 63 mm dia instantaneous pattern branch short pipe, 20 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling complete as required.		2	Each
403	403	Providing & Fixing of standard Fireman's Axe with heavy insulated handle.		2	Each
404	404	Providing & fixing fire authority approved M.S. shutter (size 1200 (L) x 2100 (H) mm ) made out of 16 gauge M.S. sheet Angle frame capable of accommodating fire hose reel, fire hydrant, hose pipe, fittings & accessories. The box shall have a single or double glazed front glass door (with 4 mm thick glass) with lock & key arrangement & shall be painted with Fire red as per IS:5, shade no. 536. (For Internal Hydrant)		2	Each
405	405	PORTABLE FIRE EXTINGUISHERS
406	406	Providing & fixing of IS marked (IS: 13386-1992) mechanical foam type fire extinguishers 40 kg consisting of welded M.S. trolley mounted cylindrical body, squeeze lever discharge valve fitted with pressure discharge hose, discharge nozzle, trolley etc. finished externally with red enamel paint and fixed to wall with brackets complete with internal charges - For DG Set, Substation area		4	Each
407	407	Providing and fixing of carbon-di-oxide fire extinguishers (22.5 kg) trolley mounted with all accessories internal discharge tube, high pressure discharge hose, discharge nozzle, ISI marked as per IS:2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge - For LT Panel Room, Electrical Rooms, Plant Room, Pump Room etc.		2	Each
408	408	Sand Bucket with Stand (6 Bucket)		3	Set
409	409	ELECTRICAL INSTALLATION FOR FIRE FIGHTING SYSTEM
410	410	1 No. Diesel Fire Engine Control Panel (As part of the Fire Pump Panel)
411	411	Battery charger system for Diesel Engine driven fire pump comprising:
412	412	110V / 24V or 12V suitable rated DC Battery charger as per engine (25 Amp Battery Charger & switch for trickle / boost, auto / manual & auto test.
413	413	AMF DC Unit, Main switch ON/OFF
414	414	Control circuiting with suitable TP MPCB / SP MCB of required fault withstand capacity as of fire panel.
415	415	Engine Start Relay, Auxiliary contacts
416	416	Engine start push button
417	417	Engine stop push button
418	418	Reset & Acknowledge alarm, all lamps test
419	419	DG Set run indication
420	420	DC Ammeter 0-30A
421	421	DC Voltmeter 0-30V
422	422	AC Voltmeter 0-300V
423	423	Timer as required (0-30 Seconds)
424	424	Hooter 24V DC
425	425	Auto / Manual Selector switch
426	426	Inter locking with pressure switch, Jockey pump, Hydrant pump & Sprinkler pump
427	427	BMS Connectivity
428	428	Wiring for start & stop solenoids
429	429	Four Window status facia for battery charger :
430	430	Main supply ON
431	431	Battery charger ON
432	432	High voltage trip
433	433	Spare
434	434	Four window annunciator for engine:
435	435	Low lub oil pressure
436	436	High water temperature
437	437	Set fail to start
438	438	Over Speed
439	439	Common fault
440	440	Diesel Pump Starting Logic:
441	441	MODE SELECTION:
442	442	Auto/Manual mode will be selected by selector switch provided on the panel.
443	443	MANUAL MODE :
444	444	Selector switch shall be kept in manual mode
445	445	Engine Start through Start Push Button
446	446	Engine Stop through Stop Push Button
447	447	AUTO MODE :
448	448	Selector switch shall be kept in auto mode
449	449	Automatic start of engine at low pressure
450	450	Three attempt starting by engine start relay, if not started after three attempts, relay will generate 'Fail to Start' signal.
451	451	Engine shall be stopped manually as in case of auto mode
452	452	Diesel Fire Engine Control Panel shall be complete with all inter connections, internal wiring & terminal blocks etc. Control wiring for linking with pressure switch for auto operation.
453	453	Fire pump panel to be complete with all control wiring / terminals for linkage with flow switches / pressure sensor for auto operation of pumps and as per the requirement of Local Govt. Fire Officer.
454	454	Fire Pump Panel as described above.		2	Set
455	455	Supply, installation, testing & commissioning of following sizes of 1100 V grade PVC Aluminium armoured cables, PVC insulated PVC sheathed, including cable trays /supports as per site conditions.
456	456	3C X 120 Sq.mm		40	RM
457	457	3C X 10 Sq.mm		40	RM
458	458	CONTROL CABLE:
459	459	Supply and laying of 4C x 1.5 Sq.mm copper armoured cable including termination. (Control cable shall be paid separately under control cable head).		30	RM
460	460	Supply and laying of 2C x 1.0 Sq.mm copper armoured cable including termination. (Control cable shall be paid separately under control cable head).		50	RM
461	461	CABLE TERMINATION:
462	462	Supply & making end termination with brass double compression glands for the following PVC insulated, PVC sheathed & armoured 1100 V grade Aluminium cable including cost of crimping lugs/ferrules, compression glands, solder, cable sockets, insulation tape etc complete as required.
463	463	3C X 120 Sq.mm		4	Nos.
464	464	3C X 10 Sq.mm		4	Nos.
465	465	Body earthing of the various equipments/ motors/ switchgears supplied by the bidder with suitable size of earthing strip/wire etc. as per IS:3043 and as required including provision for connection of earthing to main earthing pits.
466	466	(G.I earth strip of size 25 mm x 6 mm).		100	RM
467	467	PORTABLE FIRE EXTINGUISHERS
468	468	Providing & fixing of IS marked (IS:15683) portable fire extinguisher, carbondioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1 M long & complete in all respects including initial fill with CO2 gas confirming to IS:307-1966 filled to a filling ratio of not more than 0.667 of not more than 0.667 and wall suspension bracket - With every FHC, UPS Room,
469	469	Capacity 4.5 kg		2	Each
470	470	6 Kg. ABC Powder type fire extinguishers are manufactured and marked to Indian standard IS: 13849. Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases - With every FHC and one for 300 Sq.M area		2	Each
471	471	VARIABLE REFRIGERANT VOLUME / FLOW AIR-CONDITIONING SYSTEM
472	472	OUTDOOR UNIT
473	473	Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .
474	474	10 HP Cool / Heat Pump Unit		2	NO.
475	475	INDOOR UNIT-CASSETTE TYPE
476	476	Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
477	477	2.60 TR 1165 CFM		2	NO.
478	478	INDOOR UNIT-HIGH WALL TYPE
479	479	Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
480	480	1.3 TR 424 CFM		9	NO.
481	481	Supply, Instalaltion, testing and commissioning of Y-joints Including all Taxes & Duties, Freight, Insurance etc. In INR.		11	NO.
482	482	Corded Self Diagnostic Type Remote Controllers
483	483	Supply, Installation, Testing & Commissioning of Corded Self Diagnostic Type Remote Controllers Including all Taxes & Duties, Freight, Insurance etc. In INR.
484	484	Supply, Installation, Testing & Commissioning		8	Set
485	485	REFRIGERANT PIPING FOR VRV / VRF SYSTEM
486	486	Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required
487	487	28.6 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation\n		25	RMT
488	488	22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation\n		5	RMT
489	489	19.1 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation\n		25	RMT
490	490	15.9 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation\n		35	RMT
491	491	12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation\n		40	RMT
492	492	9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation\n		55	RMT
493	493	6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation\n		30	RMT
494	494	CONDENSATE DRAIN PIPING
495	495	Supply, installation, testing and commissioning of UPVC condensate drain water piping of density 20 Kg/m³ complete with fittings like elbows, tees, reducers, bends, flanges, supports, insulation etc. as required and of following sizes.
496	496	25 mm dia pipe, Insulation Thickness - 9 mm		95	RMT
497	497	32 mm dia pipe, Insulation Thickness - 9 mm		60	RMT
498	498	SPLIT TYPE A.C.
499	499	AIR COOLED NORMAL HI WALL SPLIT UNIT
500	500	Supply, installation, testing and commissioning of minimum three star BEE rated Hi-wall Split Unit with rotary / reciprocating / scroll compressor, cordless control / thermostat, eco-friendly refrigerant charged, copper coil and aluminium fins for indoor & outdoor uniy of following capacity.
501	501	i) 2.0 TR
502	502	Supply, Installation, Testing & Commissioning		4	NO.
503	503	REFRIGERANT PIPING
504	504	Supply, installation, testing and commissioning of refrigerant piping (two lengths) duly insulated with 6mm thick nitrile rubber tube / kinifoam tube and finally finished with PVC tap wrapping to connect the indoor and outdoor unit including all the civil work such as chisling, making hole in brick / block work for passing insulated refrigerant piping as well as power and control cabling, finishing / making good etc. The diameter, thickness and type of refrigerant pipe shall be as per supplier recommendation & to be shared before finalising the work order. The cost shall be inclusive of additional top up of refrigerant if required for proper commissioning of the AC Unit.
505	505	Hi Wall Unit
506	506	c) 2.0 TR		16	RMT
507	507	PROPELLER FANS
508	508	Supply, installation, testing and commissioning of Propeller Fan & suitable for 240 volts, 50 Hz, 960 RPM, single phase AC supply complete with gravity louvers and speed regulator etc.
509	509	200 CFM		2	NO.
510	510	850 CFM		2	NO.
511	511	ACCOUSTICALLY INSULATED BOX TYPE INLINE FANS
512	512	Supply, installation, testing and commissioning of single pahse box type Inline fans with motor, fire retardent double layer canvass connection etc complete in all respect & of following capacities. The casing of inline fans shall be acoustically lined & shall be selected for lower noise level. Fan motor shall have inbuilt speed controller.
513	513	700 CFM (15mm static pressure, single phase)		1	NO.
514	514	900 CFM (15mm static pressure, single phase)		1	NO.
515	515	1500 CFM (20mm static pressure, single phase)		2	NO.
516	516	RECTANGULAR DUCTING (FACTORY MADE)
517	517	Supply, fabrication, installation and testing of G.S.S. sheet metal ducting complete with Spliter Damper, duct damper, vanes etc. as required & as per SMACNA standard complying with tender specifications & as per approved shop drawings.
518	518	24 G		20	SMT
519	519	GRILLES, DIFFUSERS, VCD ETC
520	520	Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.		0.4	SMT
521	521	Supplying & fixing of Fresh air intake / Exhaust air louvers with bird screen dampers (Aluminium extruded only)		1	SMT
522	522	Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.		0.4	SMT
523	523	Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.		2	SMT
524	524	Supplying & fixing of Fresh air intake / Exhaust air louvers with bird screen dampers (Aluminium extruded only)		0.9	SMT
525	525	M.C.C. For VRV Outdoor Units (Panel Suitable For Outdoor Type - IP54), Location Near ODU
526	526	Supply, installation, testing and commissioning of TPN Distribution Board for ODU Power Supply IP-55 Weather-proof TPN DB/Splitter Board suitable for outdoor installation with 1 no. incoming feeder supplied from from\nelectrical DB & nos. of outgoing feeders as required for each ODU. Incoming feeder shall be sized for Aluminium cable, with MCB/MCCB & indicating lamps, Outgoing feeders shall be with MCB of required rating. \n
527	527	63 A TPN MCB (Controls & interlocking accessories as required. )		2	NO.
528	528	POWER & CONTROL CABLING
529	529	Supply, laying, testing and commissioning of power and control cabling as per specification given in the tender.
530	530	Note:- Power cable with earthing shall be made available near outdoor units. Only termination into HVAC equipments (Indoor & Outdoor) shall be done by HVAC Contractor.
531	531	4C x 16 Sq. mm Copper Conductor (Unarmoured) For VRF Unit		15	RMT
532	532	4C x 4 Sq. mm Copper Conductor (Armoured) For Split AC		16	RMT
533	533	Supply, laying, testing and commissioning of power and control cabling as per specification given in the tender.
534	534	A) Power cabling (XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade) including cable end termination with brass compression glands & aluminium lugs etc as per specification.
535	535	1 x 3C x 4 Sq. mm		50	RMT
536	536	For VRV Indoor Units (Cable shall be laid running in the PVC conduit through wall & ceiling along with the approved route. AC Contractor shall include the cost of chiselling & finishing the wall / ceiling. Cable from ODU electrical feeder panel shall run along with refrigerant piping on common cable tray)
537	537	3C x 2.5 Sq. mm Copper Conductor (PVC insulated, PVC sheathed flexible wire)		50	RMT
538	538	Providing & fixing of control cum trans-mission wiring of copper between indoor and outdoor unit in 20 mm PVC Conduit. AC Contractor shall include the cost of chiselling & finishing the wall / ceiling .
539	539	i)2C x 1.5 Sq mm		250	RMT
540	540	EARTHING STRIP / WIRES AS PER SPECS.
541	541	Supply & laying of 6 mm dia GI wire or in recess for loop earthing as required.		50	RMT
542	542	CABLE TRAY
543	543	Supply and installation of lader type 16 G GI perforated 'U' shaped channel 40mm x 20mm cable tray of following sizes.
544	544	100 mm wide		50	RMT
545	545	VOLTAGE STABILISERS
546	546	Supply, installation, testing & commissioning of Voltage Stabliser with time delay device & of ISI marked, which operate satisfactorily upto low voltage of 110 V.
547	547	5.0 KVA		4	NO
548	548	AXIAL FLOW FAN
549	549	Supply, Installation, Testing & Commissioning of Axial flow exhaust fans (Wall mounted) complete with casing,TEFC sq cage induction motor & mounting frame, MS rain protection cowl, bird screen and all other accessories epoxy painted (suitable for 220V/single-phase supply) as specified. Fans shall be of following Capacities:
550	550	i) 1,500 CFM (10 mm st. pr, 400 mm Dia, 0.55 Kw Motor IE-2 Class & Class F, 960 RPM, Direct Driven, Exhaust Application).		20	NO.
551	551	ROOF EXTRACTOR UNITS
552	552	Supply, installation, testing and commissioning of Roof extractor units (axial flow type) with MS hood, disconnect switch Fan wheel, Cast Aluminium Impeller, electric drive motor with motor coupling if any and motor bracket. Short duct mounting/axial MS fan casing having inspection door and base Grouting framework & foundation bolts including screen at bottom. MS Rain protection cowl with bird-screen (provided with roof – hood with limit switch) Foundation bolts including screen at bottom and all accessories as suitable. \nFans shall be of following Capacities:
553	553	i) 4,000 CFM (15 mm st. pr, 600 mm Dia, 1.1 Kw Motor IE-2 Class & Class F, 960 RPM, Direct Driven, Exhaust Application).		3	NO.
554	554	VENTILATION PANEL
555	555	Type-2 Co-ordination
556	556	1 No. suitable rated TP MPCB, 25KA, with inbuilt O/L relay & inbuilt SPP feature (site adjustable)
557	557	Suitable sized 3P contactor with 2 NO & 2 NC Auxiliary contacts
558	558	ON/OFF / Trip indication lamps (110V) (LED Type)
559	559	ON/OFF Push buttons
560	560	2 Pole A/M Selector switch for BMS application
561	561	Suitable rated single cast resin CT for metering on 'Y' phase, of Class-1 accuracy and of suitable burden & ratio
562	562	Digital ammeter
563	563	ON/OFF-Trip / A/M potential free contacts for BMS
564	564	Spares:
565	565	i) 6A 10KA, DP MCB's-2 Nos.		2	SET
566	566	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
567	567	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire		500	RMT
568	568	CIRCUIT CUM POINT WIRING (WITH PVC/MS CONDUITING)
569	569	Wiring for light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
570	570	Group C		180	Point
571	571	Wiring for exhaust fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
572	572	Group C		22	Point
573	573	Wiring for fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
574	574	Group C		13	Point
575	575	MCB CONTROL LIGHT POINTS FOR SPORTS :
576	576	Wiring for light point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, earthing the point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Primary (first) light point controlled by a MCB (MCB cost not to be included here).		25	Nos.
577	577	Wiring for light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required Secondary (loop) light point looped to first point and so on.		141	Nos.
578	578	Wiring Point for 6A Switch Socket with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in pvc conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit partly concealed in the wall and partly laid in slab and, and modular type switch and socket etc complete in all respect as directed including matching colour wash.		70	Nos.
579	579	Supply and wiring of power point with 2X4sq.mm+1X4 sq.mm FRLS PVC insulated copper conductor cable in PVC conduit with G.I. switch box, 16A modular switches with 6/16A 5 pin socket, modular cover plate, surface or deep tee with all accessories		12	Nos.
580	580	Supply and wiring of power point with 2X4sq.mm+1X4 sq.mm FRLS PVC insulated copper conductor cable in PVC conduit with G.I. switch box, 16A modular switches with 20A 5 pin socket, modular cover plate, surface or deep tee with all accessories		14	Nos.
581	581	Supplying and fixing two module stepped type electronic fan\nregulator on the existing modular plate switch box including\nconnections but excluding modular plate etc. as required.		13	Nos.
582	582	LDB - (12WAY TPN DB) 3 Nos
583	583	Supplying and fixing of following ways surface/ recess\nmounting, vertical type, 415 V, TPN MCB distribution board of\nsheet steel, dust protected, duly powder painted, inclusive of\n200 A tinned copper bus bar, common neutral link, earth bar,\ndin bar for mounting MCBs (but without MCBs and incomer ) as\nrequired . (Note : Vertical type MCB TPDB is normally used\nwhere 3 phase outlets are required.)
584	584	12 WAY (4 + 36), DOUBLE DOOR		6	Each
585	585	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\"\ncurve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with\nconnections, testing and commissioning etc. as required.
586	586	Single pole and neutral		1	Each
587	587	Single pole		144	Each
588	588	Duble pole		4	Each
589	589	Triple pole and neutral		4	Each
590	590	LDB - (8WAY SPN DB) 1 No
591	591	Supplying and fixing following rating, double pole, (single phase\nand neutral), 240 V, residual current circuit breaker (RCCB),\nhaving a sensitivity current 30 mA in the existing MCB DB\ncomplete with connections, testing and commissioning etc. as\nrequired.
592	592	63A		1	Each
593	593	LDB - (8WAY TPN DB) 1 No
594	594	Supplying and fixing following way, horizontal type three pole\nand neutral, sheet steel, MCB distribution board, 415 V, on\nsurface/ recess, complete with tinned copper bus bar, neutral\nbus bar, earth bar, din bar, interconnections, powder painted\nincluding earthing etc. as required. (But without\nMCB/RCCB/Isolator)
595	595	6 WAY (4+18) , DOUBLE DOOR		1	Each
596	596	Supplying and fixing following rating, four pole, (three phase\nand neutral), 415 volts, residual current circuit breaker (RCCB),\nhaving a sensitivity current 30 mA in the existing MCB DB\ncomplete with connections, testing and commissioning etc. as\nrequired.
597	597	63A		1	Each
598	598	LIGHT FIXTURE & EXHAUST FAN.
599	599	Supply and fixing of recess/Surface/Pendent mounting round 6 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.		96	each
600	600	Supply and fixing of recess/Surface/Pendent mounting round 10 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.		160	each
601	601	Supply and fixing of recess/Surface/Pendent mounting round 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.		26	each
602	602	Supply and fixing of recess/Surface/Pendent mounting round 25 Watt LED Down Lighter Endura HO is a highly efficient downlight with efficacy of 100 lm/W . With its IP44 rating, the range is perfect for corridors, WCs, high public circulation areas and reception areas. EMI /EMC, CE Compliant Product.		37	each
603	603	Supply, Installation, Testing & Commissioning of 10watt LED Bulk head light		6	each
604	604	Supply, Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc., complete in all respect.		32	each
605	605	Supply and fixing 240 Watt LED, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium non integral IP66 flood light, suitable for high mast application, highlighting architectural facade and general purpose lighting. (Make-Havells or Equivalent Item no. JETA VALOURFL240WLED757MODWBLTG )		24	each
606	606	Supply and fixing of recess/Surface/Pendent mounting round 10 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.		32	each
607	607	SUPPLY,INSTALLATION OF FEEDER PILLAR / PANELS
608	608	EXTERNAL LIGHTING FEEDER PILLAR :-
609	609	INCOMER : 40 AMP DP MCB (10 KA)
610	610	BUS BAR : 100 AMP, 230Volts, 1 phase 50 HZ 2P high conductivity electrolytic Aluminium bus bar. The current density of bus bar shall be minimum 1.00 sq mm /amp.
611	611	The Maximum allowable temperature for the Bus bar to be restricted to 85 deg C. The temperature rise should be restricted to 35 deg C above ambient temperature.
612	612	OUT GOINGS : 12 nos. 6-32 AMP DP MCB (10 KA)		4	SET
613	613	CABLES
614	614	SUPPLY OF CABLES- XLPE INSULATED, AL. CONDUCTOR AR. CABLES: Supply of following sizes of 1.1kV grade XLPE insulated, PVC type ST-2 inner & outer sheath, Aluminium conductor, Armoured/ Unarmoured cables as per IS:7098 Part-I.\n
615	615	6 sqmm 2 core		4890	Mtr.
616	616	6 sqmm 4 core		600	Mtr.
617	617	10 sqmm 4 core		200	Mtr.
618	618	16 sqmm 4 core		500	Mtr.
619	619	50 sqmm 3.5 core		120	Mtr.
620	620	185 sqmm 3.5 core		520	Mtr.
621	621	300 sqmm 3.5 core		30	Mtr.
622	622	LAYING
623	623	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
624	624	Upto 35 sq. mm		5720	metre
625	625	Above 35 sq. mm and upto 95 Sq.mm		120	metre
626	626	Above 95 sq. mm and upto 185 Sq.mm		520	metre
627	627	Above 185 sq. mm and upto 400 Sq.mm		30	metre
628	628	Laying of one number PVC insulated and PVC sheathed / XLPE\npower cable of 11 KV grade of following size direct in ground\nincluding excavation, sand cushioning, protective covering and\nrefilling the trench etc as required.
629	629	Upto 120 sq. mm		70	metre
630	630	LT PANEL
631	631	1Nos. 160A 35kA, 4P MCCB with 2NO + 2NC Auxiliary contacts + One trip contact, with inbuilt Micro Processor based releases, with 3 Nos. Class-1 Cast resin metering CT's of suitable ratio & burden, ON/OFF/Trip LED indications (110V AC).
632	632	With digital ammeter with inbuilt selector switch
633	633	LT Panel described above.		1	set
634	634	LIGHT
635	635	SOLAR LIGHT
636	636	Supply and installation of Integral LED Solar Street Light Pressure Die Cast Aluminum Housing reliable & robust construction, minimum system efficacy of 3000 lumens, system wattage 12V DC, 175 lm/Watts, SMD LEDs With PMMA Lens plat, External built proper heat sinks and UV stabilized polycarbonate cover IP65 & life of LED luminaire engine should be 50000hrs along with built in high efficiency MPPT charge controller & driver along with\nLiFePo4 battery chemistry & high efficiency reliable PV Module suitable for even harsh conditions, CCT >5700K, CRI 70. Solar panel module capacity 12V, 28Watts peak & Solar Cell Efficiency min 12%, Polycrystalline. The fixture should have designed for Street light application & should have flexible angle of mounting from 0-15 degree adjustable, Arm & Pole Mount for diverse geographical condition. Factory configured LED’s Load & PIR sensor dimming for optimum of autonomy uses up to 24hrs.\nDimming profile should be as from dusk –first 05 hours sensor\nenabled, next 05 hours sensor disabled with fixed at 30%\nbrightness, & next till dawn sensor enabled. System should have\nsmart self-diagnostic feature for indicating battery charging, cut\noff & fault if any. Company Logo shall be engraved to avoid any\ndistrusts & complete system should have minimum warrantee of\n36 months.		2	Nos
637	637	Supply and erection of 6mtr Octagonal Pole for solar light , Height = 4500mm, Top 70mm, Bottom 130mm, Thickness 3mm, Base Plate 220x220x16mm Foundation Bolt Length 600mm, Nos 4, Día 24mm		2	Nos
638	638	Supply, Installation, Testing & Commissioning of 5 mtr High Single arm Decorative Pole of approved make\n		155	Nos
639	639	Supply and fixing of 48 Watt LED Street light New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07.		4	Nos
640	640	LT MCCB ISOLATOR PANEL (OUTDOOR ENCLOSURE)
641	641	Providing and fixing 125 A,36KA,FP MCCB \n with thermomagnetic release and terminal\nspreaders in cubicle panel board including drilling holes\nin cubicle panel, making connections, etc. as required.
642	642	IP Rating (with canopy & double door): IP 55
643	643	Location: Outdoor
644	644	4 NO + 4 NC Auxiliary contacts
645	645	Safety Shutter
646	646	Door sealing frame
647	647	In built trip LED's
648	648	Shunt trip coil (110V)
649	649	Emergency Stop push button on the front floor
650	650	Indication:
651	651	R,Y,B Phase - LED (110V)
652	652	ON / OFF - LED (110V)
653	653	Trip Circuit Healthy - LED (110V)
654	654	LT MCCB Isolator Panel (Outdoor Enclosure) described above.		3	Set
655	655	LT CABLE
656	656	Supply of following sizes of 1.1kV grade XLPE insulated, PVC type ST-2 inner & outer sheath, Aluminium conductor, Armoured/ Unarmoured cables as per IS:7098 Part-I.
657	657	For LT Distribution
658	658	3.5 core x 300sq. mm. XLPE		120	RM
659	659	3.5 core x 95sq. mm. XLPE		100	RM
660	660	3.5 core x 50sq. mm. XLPE		350	RM
661	661	4 core x 10 sq. mm. XLPE		550	RM
662	662	LADDER TYPE CABLE TRAY
663	663	Supply, fabrication and installation of hot dip galvanised factory built in LADDER type cable trays complete with all bends, tees, elbows, reducers etc. of various width in two tier/ three/ five tier fashion either on one side of the wall or on two sides of the wall or at other places. (All bends & tees shall be of factory built in of same make as that of tray). (Measurement of G.I angle iron & rod shall be measured & paid separately). The trays shall be as per specifications. Trays shall be complete with supports as called for in the specifications. Supports shall be included in the rate of trays. Extra shall not be paid for supports.
664	664	100mm wide tray		500	RM
665	665	250mm wide tray		250	RM
666	666	UPS FOR EMERGENCY LIGHTING, & SECURITY SYSTEMS ETC.
667	667	Supply of IGBT based with in-built galvanic isolation transformer, micro processor controlled True On line double conversion 3 phase input and 3 phase 415V output 7.5 KVA UPS (N) consisting of following:
668	668	1 No. UPS module with integrated 100% rectifier + inverter.
669	669	Battery Circuit breaker for UPS module in CRCA housing with all required fixing accessories & hardware.
670	670	Galvanic isolation transformer k-rated, at the inverter output of UPS Module.
671	671	RS 485 BACnet / Modbus protocol with UPS module for BMS Connectivity. All the informations to be provided to the BMS vendor at one point.
672	672	In-built static switch for bypass & inverter in UPS module.
673	673	In-built Manual maintenance bypass.
674	674	Interconnecting copper cabling (DC cabling) between UPS, Active filter, Battery breaker & Batteries of required length and size.
675	675	OC Web card for web enabling with an inbuilt facility of event logging.
676	676	Sealed maintenance free batteries for 10 KVA UPS with 90mins. backup time on UPS module with inerconnectors, Rack and accessories. Rack shall have shrouds for safety from live battery terminals.
677	677	Suitable MS stand of 450mm high for UPS module duly painted.
678	678	RAM module with UPS and Cat 5 cable for RAM connectivity.
679	679	Charger Capacity 120%
680	680	10 KVA UPS described above.		1	Set
681	681	DG SET 250 KVA
682	682	Design, supply, installation, testing & commissioning of DG Sets and its ancillaries :
683	683	Supply ,Unloading & shifting, Installation, testing, commissioning and alignment of OF D.G. SETS
684	684	DG SET WITH RADIATOR - IN ACCOUSTIC HOOD
685	685	Design, Manufacture, Supply at site of Prime Duty continuous rated 4 stroke, 1No 250 kVA DG Set comprising of Engine of 1500 rpm, Radiator Cooled, coupled and aligned with continuous rated 250kVA , 415 V ± 1%, 3 phase, 4 wire, 50 Hz. 1500 rpm, 0.8 PF industrial type brushless, AC Alternator with electronic AVR mounted on a common base frame. Alternator shall be complete with suitable terminal box with Aluminium link work to accomodate the Aluminium Armoured cables /Bus duct as may be required.
686	686	DG Set shall be complete with following accessories:
687	687	3mm thick MS painted 205 litres Day Oil Tank with float & board level indicator
688	688	Fully charged Lead Acid batteries with painted angle iron stand
689	689	Battery leads
690	690	Residential Silencer & Flexible coupling
691	691	Anti vibration mountings as required.
692	692	O/M MANUALS, TEST CERTIFICATES & WARRANTY CERTIFICATES :
693	693	DG Set shall have 1 set (Original) + 3 sets photocopies of engine & alternator O/M manuals, Test certificates of Engine & alternator, warranty certificates of engine, Alternator & Batteries etc.
694	694	FUEL PUMP & GOVERNOR :
695	695	Engine fuel pump shall be with electrically operated actuator & electronic / digital governor. ) suitable for synchronization.
696	696	Engine fuel pump shall be inline fuel pump & Mechanical governor. (For 160 KVA & below)
697	697	DG SET CONTROLLER:
698	698	The DG Set shall be complete with DG Controller. The controller shall be able to perform the following functions & monitor various parameters::
699	699	Perform following functions:
700	700	Manual Start / Stop facility through key / Push button & with remote input acceptance for remote start and with cranking relay.
701	701	Engine monitoring & protection:
702	702	Lub oil pressure
703	703	Coolant temperature
704	704	Engine Speed
705	705	Run Hour
706	706	Battery Voltage
707	707	Low Lub oil pressure & warning
708	708	High coolant temp. warning & shut down
709	709	Low coolant level shut down
710	710	Over speed shut down
711	711	Charging failure indication
712	712	Low / high battery voltage warning
713	713	Fail to Crank / Fail to start / Shut down
714	714	Alternator (AC) metering & protection :
715	715	3 Phase Amps
716	716	3 Phase voltage
717	717	KW
718	718	KVA
719	719	PF
720	720	HZ
721	721	Over voltage shut down
722	722	Under voltage shut down
723	723	Over frequency shut down
724	724	Under frequency shut down
725	725	Over current shut down
726	726	Field overload shutdown
727	727	Loss of sensing voltage shutdown
728	728	Inbuilt Stop button
729	729	250kVA DG Set with Radiator - In Accoustic hood as described above		1	Sets
730	730	HT CABLING:
731	731	Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc.
732	732	120 sq. mm 3 core		60	RM
733	733	Supplying and making terminal joints for the following sizes of 11KV, XLPE insulated, PVC type ST-2 inner & outer sheath, Aluminium conductor, armoured cable as per IS:7098 Part-2 (Earthed) including terminal lugs, insulation tape, heat shrinkable kit complete as required.
734	734	3C x 120 Sq.mm( out door type)		4	No.
735	735	Supply & installation of 250 kVA continuous duty cycle, 11kV/433V, 3 phase, 50Hz, oil type , Dyn-11 vector group, step down, outdoor type, copper wound, ONAN type transformer complete with Off Load Tap changer . Tap changing range shall be ±2.5%, ±5%, ±7.5% in steps of 2.5%.Transformer shall have cable box for 11kV XPLE cable on HT side and Cable box on medium voltage side. with G.O.D.O. swith and two pole structure.		1	No.
736	736	G.I. EARTHING
737	737	Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.		28	set
738	738	Providing and fixing 25 mm X 5 mm G.I. strip on surface or in\nrecess for connections etc. as required.		300	RM
739	739	Earthing with copper earth plate 600 mm X 600 mm X 3 mm\nthick including accessories, and providing masonry enclosure\nwith cover plate having locking arrangement and watering pipe\nof 2.7 metre long etc. with charcoal/ coke and salt as required.		2	set
740	740	Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.		70	RM
741	741	Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.		39	set
742	742	Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/termination with GI thimble etc. as required.		3700	RM
743	743	25 x 5mm G.I strip.		180	RM
744	744	CONDUITING & WIRING FOR TELEPHONE, INTERCOM, & DATA:
745	745	Supply, installation, testing and commissioning of conduiting & wiring for Telephone, Intercom, & Data system including providing and fixing:
746	746	All necessary specials and fittings, brass bushes etc.
747	747	Approved cover plates for inspection, junction and outlet boxes.
748	748	All fixing accessories such as clips, nails, screws etc.
749	749	Providing and fixing approved saddles, hooks and grouting the same as required, in the case of all exposed conduit work.
750	750	Providing and fixing approved saddles, hooks and grouting the same as required, in the case of all exposed conduit work.
751	751	Providing 14 SWG GI pull wire in all conduit work.
752	752	Repainting of MS conduit, outlet boxes and junction boxes when ever damaged.
753	753	Wiring, terminations, testing & commissioning as required.
754	754	TELEPHONE/ INTERCOM WIRING
755	755	Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel conduit as required.
756	756	2 Pair		400	RM
757	757	CONDUITING FOR TELEPHONE/DATA
758	758	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
759	759	25mm		1400	RM
760	760	TELEPHONE TAG BLOCK
761	761	Supply, installation, testing & commissioning of telephone tag blocks with 'KRONE\" terminal connectors fixed in 16G powder coated, hinged, lockable door, sheet steel enclosure including civil work such as chase cutting, fixing/ concealing the box and making good as required including terminations:
762	762	10 pair tele tag block		2	No.
763	763	TELEPHONE / INTERCOM OUTLET - MODULAR TYPE
764	764	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
765	765	Telephone socket outlet		6	Each
766	766	OUTLET BOXES FOR TELEPHONE / INTERCOM OUTLET
767	767	Supplying and fixing following size/ modules, GI box alongwith\nmodular base & cover plate for modular switches in recess etc.\nas required.
768	768	3 Module (100mmX75mm)		6	Each
769	769	DATA POINT
770	770	Supply and installation of Cat 6 module for Data. The fire retardant plastic UL 94V-0. Dust cover / blank shall be provided to protect unused faceplate openings. Termination caps shall be provided to protect jack wiring etc complete as required accessories & as per specifications.		8	Nos.
771	771	Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
772	772	1 run of cable		350	RM
773	773	FIRE DETECTION AND ALARM SYSTEM - ANALOG ADDRESSABLE
774	774	Design, Supply, installation, testing & commissioning of Fire Detection & Alarm system as per local fire norms & NBC / NFPA Codes:
775	775	MANUAL CALL POINT
776	776	Supplying, installation, testing & commissioning of addressable manual call point complete as required.		3	Each
777	777	DUAL TONE HOOTERS
778	778	Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required..		3	Each
779	779	FAULT ISOLATOR
780	780	Supplying, installation, testing & commissioning of fault isolator complete with base as required.		1	Each
781	781	CONTROL MODULES
782	782	Supplying, installation, testing & commissioning of addressable fire control module complete as required.		3	Each
783	783	Hooters / Speakes/ Strobe Circuit
784	784	MONITOR MODULES
785	785	Supply, Installation, testing and commissioning of Addressable Monitor modules for :		1	Each
786	786	FIRE ALARM CONTROL PANEL
787	787	Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.
788	788	Two Loop Panel.		1	Nos.
789	789	CABLE AND CONDUIT
790	790	Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required		750	Metre
791	791	Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
792	792	25 mm		740	RM
793	793	PUBLIC ADDRESS SYSTEM
794	794	Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.		1	Each
795	795	Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.		14	Each
796	796	Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.		6	Each
797	797	CCTV SYSTEM
798	798	Supply, installation, testing and commissioning of UL Listed, 1.3 megapixel (1280 x 960) high resolution IR Bullet Camera, 1/3” Progressive scan CMOS, [email protected], AGC ON. 0 Lux with IR on, H.264 / MPEG4 / MJPEG, Dual stream, Bit rate 32 Kbps-16Mbps, Standard IP66, 12 VDC ± 10%, PoE (802.3af), 4/6mm lens or equivalent high definition,IR range 20-30 mtr, motion detection, with ONVIF,SIP supported, connectors complete as required IR Bullet type for mounting recessed in false ceiling or mounted on wall complete as per tender specifications required.		4	Nos.
799	799	Supply, installation, testing and commissioning of UL Listed, 1.3 megapixel (1280 x 960) high resolution Dome Camera,1/3” Progressive scan CMOS, 0.2 O 0 Lux with IR on, 3.6/4 mm lens or equivalent high definition, motion detection,120dB wide dynamic range, H.264 / MPEG4 / MJPEG, Dual stream, Bit rate 32 Kbps-16Mbps, 12 VDC ± 10%, PoE (802.3af), with ONVIF,SIP supported,connectors complete as required in dome shape fixed type for mounting recessed in false ceiling		7	Nos.
800	800	Supply, installation, testing & commissioning of 32Channel NVR with embedded technology, capable of real time viewing and recording at 4CIF with built in DVD/CD writer. Vendor to consider storage for 30 days continuous recording. Vendor to submit storage calculation sheet		1	Nos.
801	801	Supply & Installation of 32\" CCTV LED monitor capable of accepting S - video as well as composite video signal (Make : Interlogix / Americal Dynamics / SONY)		1	Nos.
802	802	Supply & Installation of HDD, Rack, Chasis, Unit and Accessories for above components		1	Set
803	803	Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
804	804	1 run of cable		450	RM
805	805	FINAL DISTRIBUTION BOARDS
806	806	LDB - (6WAY SPN DB) 3 Nos
807	807	Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
808	808	6 way , Double door		3	Each
809	809	8 way , Double door		1	Each
810	810	Supply and fixing of 50 Watt LED Street light New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07.		155	Nos
811	811	Supply, Installation, Testing & Commissioning of 9 mtr High Single arm Decorative Pole of approved make\n		27	Nos
812	812	Supply and fixing of 100 Watt LED Street light New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source with toughened glass top cover. TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device. For 9 meter pole		27	Nos
813	813	Supply, intallation and testing of 18 Watt up light for tree.		208	each
814	814	Supply & installation of 200 kVA continuous duty cycle, 11kV/433V, 3 phase, 50Hz, oil type , Dyn-11 vector group, step down, outdoor type, copper wound, ONAN type transformer complete with Off Load Tap changer . Tap changing range shall be ±2.5%, ±5%, ±7.5% in steps of 2.5%.Transformer shall have cable box for 11kV XPLE cable on HT side and Cable box on medium voltage side. with G.O.D.O. swith and two pole structure.		1	No.
815	815	SMART POLE
816	816	Supply, Installation, Testing & Commissioning of Smart pole.It should able to meet city aesthetic requirement and it should visual appealing.Maximum height requirement is up-to 10 meter. The pole should have capabilities to accommodate IP based Surveillance Camera, Smart LED lighting with individual controller, Environment Sensors, Panic button, IP Based horn speaker, KIOSK for public application and Wi-Fi Hotspot. with other accessories for commissioning.		20	Nos.
817	817	CCTV CABLE AND CONDUIT
818	818	Supply, Laying and termination of 48 core Optical fibre cable, multimode, armored cable as per specification		1200	Rmt
819	819	Cat-6 Unarmored Cable in existing conduit		2250	Rmt
820	820	Cat-6 Armoured Cable on surface		250	Rmt
821	821	3 C x 1.5 Sq.mm Unarmored Power Cable in existing Conduit		150	Rmt
822	822	3 C x 1.5 Sq.mm Armoured Power Cable		175	Rmt
823	823	25mm ISI marked PVC Conduit including all accessories & mounting hardware etc. complete as required.		2400	Rmt
824	824	Drilling of bore well 300mm.dia. by machine in ordinary soil, soft or hard murrum, soft rock etc.truely vertical with all equipments and labours etc., complete as directed by E.I.C..		30	Mtr.
825	825	Supply of uPVC housing pipe 150 mm dia 6.35 mm thick conforming to IS:3589, JINDAL make duly screwed & socket along with necessary welding around peripheral joint line & accessories complete in all respects.		30	Mtr.
826	826	Supply of LCG V wire screen (Johnson make) slot size 0-75 mm with thickness of 7 mm.		8	Mtr.
827	827	Lowering of uPVC Housing pipe 150 mm dia, 6.35 mm thick conforming to IS:3589, JINDAL & LCG screen duly screwed & socket along with necessary accessories complete in all respects.		30	Mtr.
828	828	Supplying of MS Bail Plug 150 mm dia.		1	No.
829	829	Providing & Laying of rounded pea shaped washed gravels, 3 mm to 6 mm size, packed in annular space around the housing pipe.		20	Cum.
830	830	Supply of 150 mm MS well cap.		1	No.
831	831	Development of tube well with air compressor of 350 PSI & 600 CFM for period of 36 Hrs.		18	Hrs.
832	832	Physical, Chemical & bacteriological examination of water to ascertain its protability as per IS:1050. This item includes complete tests & submission of report.		1	L.S.
833	833	Providing & Installing commissioning of Submersible Pumping set of BS/BSA/KBS made 5 HP submersible motor.		1	Set
834	834	Providing & Lowering GI 40 mm dia double flanged lowering pipes of suitable size for pumping machinery as approved by the Engineer-in-charge including CI specials such as CI SV. Reflex valve etc. for making connection with the delivery line.		20	Mtr.
835	835	Supply & Laying submersible Cable of 4 Sq mm Size.		30	Mtr.
836	836	Supply & fixing of Pressure Gauge.		1	Nos
837	837	Supply & fixing of NRV, Sluice Valve, Bend, Tee etc.		1	L.S.
838	838	Supply, Installing and Commissioning of Panel board made of 16 SWG sheet duly painted including fixing of the same in wall/floor on angle iron frame as per site conditions and fitting with the following:		1	SET
839	839	a) 1 No. DOL automatic stator.
840	840	b) 1 No suitable range voltmeter size 96 mm AE.
841	841	c) 1 No suitable range ammeter size 96 mm.
842	842	d) 1 No single phase presenter of Minilec.
843	843	e) 3 Nos. HRC fuses for lamps, ammeter and voltmeter.
844	844	f) 1 Nos indicating lamps.
845	845	g) 1 No MCB, of suitable range L & T / Siemens.
846	846	h) Voltage selector switch 1 No. Kaycess.
847	847	i) Push button ON/OFF switch L & T make 1 No.
848	848	j) MCB 63A – 1 No. as Incomer.

Also Visit

Tenders

Arunachal Pradesh Tenders

Services Tenders

Space Planning and Designing Tenders

Gardening Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Development And Retrofitting In Ig Park Itanagar, Itanagar-Arunachal Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Development And Retrofitting In Ig Park Itanagar, Itanagar-Arunachal Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us