Road Safety Of Jagadhri Workshop Road ( Id 428 ) Km 0 . 00 To 0 . 27 In Yamuna Nagar District

Tender Notice

Road Safety Of Jagadhri Workshop Road ( Id 428 ) Km 0 . 00 To 0 . 27 In Yamuna Nagar District

Tender Details

Road Safety Of Jagadhri Workshop Road ( Id 428 ) Km 0 . 00 To 0 . 27 In Yamuna Nagar District

Key Value

Document Fees
INR 1000 /-
INR 28000.00 /-
Tender Value
INR 13.70 Lakhs /-


FileName File Description File Size
C2F95A61-E252-4F42-81D3-F7760BF04CC0.html Tender Notice-Tender Notice 0
Tendernotice_1.pdf Tender Document-DNIT 744.59
DNIT1129.pdf Tender Document-DNIT 731.27
BOQ_226906.xls Tender Document-Pricebid 239.50

Other Information

Additional Details Available on Click
✓ Tendering Authority
✓ Publication Document
(Tender Document / Tender Notice )

BOQ Items

Name of Work: Road safety of Jagadhri Workshop road (ID 428) Km 0.00 to 0.27 in Yamuna Nagar District
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Dismantling Stone Pitching or Soling (HSR 8.2) b) Stone pitching laid dry, but grouted with natural slit and clay (Removing of existing center verge i.e Kerb) BI01010001010000000000000515BI0100001113 60.75 Cum\n(Per cubic metre)
2 2 Wrought iron & mild steel (using angles, flats, square bars, tees & channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates & tree guards etc., including cost of screws & welding rods or bolts & nuts complete fixed in position (HSR 18.12) BI01010001010000000000000515BI0100001114 135 Qtl.\n(Per Quaintal)
3 3 Painting two coats including priming coat with ready-mixed paint formetallic surfaces in all shades on new steel or iron work (HSR 16.17+16.9) BI01010001010000000000000515BI0100001115 653.4 Sqm.\n(Per square metre)
4 4 Pre-cast cement concrete 1:2:4 with stone aggregate 20mm nominal size in kerbs & the like items, finished smooth with 6mm thick cement plaster 1:3 on exposed surface including form work, placing & fixing in position, complete at the ground level or in first storey. (HSR 10.77) (-) 15.1 BI01010001010000000000000515BI0100001116 48.6 Cum\n(Per cubic metre)
5 5 Earth filling with all lead and lift in center verge complete in all respect and to the entire satisfaction of Engineer-in-charge (NS) BI01010001010000000000000515BI0100001117 186.3 Cum\n(Per cubic metre)
6 6 Cement concrete 1:8:16 with brick ballast 40mm nominal size in foundation & plinth (HSR 10.26) BI01010001010000000000000515BI0100001118 56.7 Cum\n(Per cubic metre)
7 7 Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces (HSR 16.25) BI01010001010000000000000515BI0100001119 567 Sqm.\n(Per square metre)
8 8 Painting two coats with ready-mixed exterior paint in all shades on newly plastered or concrete surface of walls (HSR 16.26) BI01010001010000000000000515BI0100001120 567 Sqm.\n(Per square metre)
9 9 The Median marker shall be made of tough, high impact resistant, injection-molded, thermoplastic body with an isosceles trapezoidal structure of lenth, width and height not less than 15cm, 10cm and 10cm respectively and thickness not less than 1.8mm. The plastic used for molding the median marker shall have a minimum izod impact strenth value of 60kg-f when tested in accordance with ASTM D256. The logo of the manufacturer shall be embossed on either side of the body in the injection molding process. The median marker shall have molding process. The Median marker shall have fluorescent yellow color retro-reflective sheeting of size not less than 8.5cm 8.5cm and with fully reflective micro prismatic cubecomers as its retro-reflective elements and meets ASTM D4956 type IX specification. The retro-reflective sheeting shall be one or both sides of the median marker and shall be dge protected with no exposed edgesthat prevent edge lifting, vandalism, sheeting damage, etc. The Median marker shall be fixed by a combination of epoxy adhesive and grouting. (Road Star) BI01010001010000000000000515BI0100001121 216 Nos. (Each)\n
10 10 Providing & Fixing road side delineator of height 1200mm made of M.S. tube size 100x80mm of height 900mm and balance 300mm of M.S. angle 25x25x3mm. Having micro prismatic panels of rector reflective panels of sheeting conforming to IRC : 67-2012 type 4 HIP and of size 0.1x0.3m as per clause No.800 of MORT&H. Complete delineator processed by heat treatment process to makes it resistant to all weather effects fixed in CC 1:2:4 block size of 300x300x450mm as clause No.806 of MORT&H specification 5th revision 2013. BI01010001010000000000000515BI0100001122 20 Nos. (Each)\n
11 11 Cautionary sign board 900mm Eqauilateral Traingle\nLeft /Right Curve, Right /Left Haipin Bend, Side Road Left. Right, Y-Intersection, Cross road, Narrow Road Ahead, Road Widens, Narrow Bridge Ahead, Reduced Carriageway, Start of Dual Carriageway, Gap in Median, Pedestrain Crossing, School Ahead, Men at work, Speed Breaker, Rumble Strip, Guarded Railway crosing and Other sign etc. BI01010001010000000000000515BI0100001123 4 Nos. (Each)\n
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail