|
| 1 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.Item / Page No : 11 / 27Specification No : MORTH-301Spec. Page No : 45-53 |
| 2 | Supplying trap metal of required size by bringing the boulders / rubble at the road side breaking them to required gradation including conveying the boulders / rubble and stacking the broken metal, excetra complete. - 80 milimetre metal, By breaking rubble obtained by blasting. (Hand broken).Item / Page No : 54 / 293Additional Specifications : 1. Work shall be carried out as per the instructions of Engineer In-Charge.2. Prior approval of sample stack of broken metal by the Executive Engineer is necessary. The date of approval will form part of the measurements. |
| 3 | Supplying hard murum / kankar at the road site, including conveying and stacking, excetra complete.Item / Page No : 29a / 29Specification No : MORTH-408Spec. Page No : 139-142 |
| 4 | Spreading 60 mm metal for road work including sectionong, excetra complete as directed by Engineer in charge.Item / Page No : 58A / 294Additional Specifications : Work shall be carried out as per the instructions of Engineer In-Charge. |
| 5 | Spreading hard murum / soft murrum / gravel or kankar for side width, excetra complete.Item / Page No : 30 / 29Specification No : MORTH-408Spec. Page No : 139-142 |
| 6 | Compacting the sub grade/gravel/oversize metal (200 milimetre loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete.Item / Page No : 59 / 294Additional Specifications : Work shall be carried out as per the instructions of Engineer In-Charge. |
| 7 | Providing and constructing 75 milimetre thick modified penetration macadam road surface including all materials, preparing the existing road surface, spreading 40 milimetre stone metal layers 30 percent crusher broken metal plus 70 percent hand broken (by breaking rubble obtained by blasting), heating and spraying the bitumen of of specified grade @2 kilogram per square metre, spreading 12 milimetre size chips, compacting with three wheel static roller having weight 8 to 10 metric tonnes to achive the desired degree of compaction as per technical specification Clause 506, excetra complete. Including picking of existing water bound macadam surface. (Using VG-30 bulk bitumen)Item / Page No : 35a / 33Specification No : IRC-SP-20Spec. Page No : 215 |
| 8 | Providing 20 milimetre thick premix bituminous carpet including supplying all materials, preparing and cleaning the base, heating bitumen, including applying tack coat at the rate of 3 kilogram per 10 square metre and providing Type-A seal coat at the rate of 0.98 kilogram per square metre, mixing hot bitumen and chips, laying the carpet layer and compacting, excetra complete. By bulk asphalt.. (Basic Carpet Rate approved by S.E. P.W. Circle, Ratnagiri Vide Letter No 3477 dated 14/10/2020)Item / Page No : 7-New / 0Additional Specifications : The work shall be carried out as directed by Engineer-In-Charge. |
| 9 | Providing and laying cement concrete pipe confirming to Indian Standard 458:2003 non pressure class-2 of 450 milimetre diameter in proper line, level and slope including providng and fixing collars in cement mortar 1:2 and curing, excetra complete.Item / Page No : 8 / 72Specification No : CD.7Spec. Page No : 162 |
| 10 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering, excetra complete.Item / Page No : 31 / 29Specification No : MORTH-408Spec. Page No : 139-142 |
| 11 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing off unsuitable or excess stuff as directed all sorts of soils.Item / Page No : 18 / 28Specification No : MORTH-301,309Spec. Page No : 45-53,85-89 |
| 12 | Providing and fixing Road junction / Information sign board of size 0.90 metre X 0.60 metre. prepared on 16 gauge mild steel sheet with angle iron frame of size 35x35x5 milimetre including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro-reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100 percent reflection including two angle iron post of size 50x50x5 milimetre of 3.65 metre. long inflated at bottom drilled on top and painted in white and black bands of 30 centimetre. with 4 numbers high strength galvanised iron bolts and nuts of size 10 milimetre diameter and 20 milimetre long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre X 60 centimetre X 75 centimetre size as directed by Engineer-in-charge excetra complete. Mild Steel Board with Engineering Grade.Item / Page No : 47 / 58Specification No : MoRTH-801Spec. Page No : ---Additional Specifications : The work shall be carried out as per instructions of Engineer in charge. |
| 13 | Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor.Item / Page No : 3 / 0Additional Specifications : 1. Government of Maharashtra, Revenue and Forest Department Gazette Number 67 Dated 15-5-2015 and Government of Maharashtra Public Works Department State Schedule of Rates 2017-18 General Note Number 4.3.2. Above / below percentage quoted by the contractor will not be applicable for this item. |
| 14 | Surcharge on Royalty charges at the rate of two percent of Royaltycharges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor.Item / Page No : 14 / 0Additional Specifications : 1. Letter from the Chief Engineer, Public Works Region, Nagpur; bearing number Ka.Raste-6/Darsuchi/7618/2019 dated 11/09/2019 and Corrigendum number 1 attached to the letter.2. Above / below percentage quoted by the contractor will not be applicable for this item. |
| 15 | Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune.Item / Page No : 4 / 0Additional Specifications : 1. The amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the Vigillence and Quality Control Office with the name of work mensioned on it.2. Above / below percentage quoted by the contractor will not be applicable for this item.Sieve Analysis Test for Hard Murrm1 Test per 100.00 Cubic Metre |
| 16 | Add 0.50 % for InsuranceNon-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. |
| 17 | Add 12 % for GSTNon-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. |
