Supply Of “High-Speed Monochrome Camera” 1.1 Sensor Type Cmos 1.2 Sensor’S Full Resolution 1.2 Mp Or Higher 1.3 Frames Per Second At Full Resolution 10,500 Fps At 1.2 Mp Of Higher 12500 Fps Or More @1Mp 1.4 Maximum Frame Rate At Minimum Resolut-Karnataka

Supply Of “High-Speed Monochrome Camera” 1.1 Sensor Type Cmos 1.2 Sensor’S Full Resolution 1.2 Mp Or Higher 1.3 Frames Per Second At Full Resolution 10,500 Fps At 1.2 Mp Of Higher 12500 Fps Or More @1Mp 1.4 Maximum Frame Rate At Minimum Resolution Regular Mode- 300,000 Fps Or More. Binned Mode: 400,00 Fps Or More. 1.5 Acceptable Frame Size (Pixels) 1024 X 1024 Pixels Or 1280 X 800 Pixels 1.6 Record Time Minimum 3.5 Seconds At Maximum Frame Rate, And Resolution 1.7 Exposure Time 800 Ns Or Lower 1.8 Burst Mode Image Capture Should Be Enabled With Shutter Off Mode 1.9 Frame straddle Option enabled with time of 726 ns or lower 1.10 Pixel Size 18 μm or lower 1.11 Bit Depth 12-bit or higher 1.12 Data Transfer Rate 10 Gb/s on RJ45 port 1.13 Data Acquisition Hardware Support National Instruments M- and X-Series DAQ modules 1.14 Software Support (SDK) NI-LabView, MATLAB, C++ 1.15 Trigger Control Programmable trigger location (pre/post trigger recording), Image-Based Auto-Trigger from software, or hardware trigger using BNC/TTL/Switch), sync, ready, event, exposure rate to be controllable by h/w trigger 1.16 Signal Control Trigger, sync, ready, rec, exposure, timecode using BNCs, programmable I/O ports for F-sync, strobe, event, trigger output, ready 1.17 Synchronization Frame synchronization to internal or external clock with 20ns timing accuracy 1.18 Exposure Control Global electronic shutter, Auto Exposure and Shutter Off mode for PIV 1.19 Acceptable Interface Ethernet/USB/HDMI 1.20 Lens Mount F-mount as Standard and optional C-mount adapters to be provided 1.21 Packing and Storage Hard Carry case with wheels 1.22 Operating Temperature 0-50 °C 1.23 Power Supply 100 - 240 VAC (All necessary Power and Communication Cables should be included) 1.24 ISO (monochrome) ISO 12232 with Tungsten STD > 50,000 1.25 Warranty 1 year Standard Other requirements 1. F-Mount Camera Lens: 30 mm/f1.8 2. Tripod Stand (should be capable of withstanding 3.5 kgs camera) 3. Cheese Plate with Handle 4. Additional Warranty for 1,2 and 3 years

Refer document

Refer document

Refer document