Maintenance Of Road From Kanchanpur To Jalabassa From Ch.13.00 Km To 19.00 Km L-6.00 Km During The Year 2020-2021 Providing Bituminous Grouting, Patch Metalling, Carpeting, Seal Coating, Etc.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 May 2021
0 days left
EMD
24241
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanchanpur → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Of Road From Kanchanpur To Jalabassa From Ch.13.00 Km To 19.00 Km L-6.00 Km During The Year 2020-2021 Providing Bituminous Grouting, Patch Metalling, Carpeting, Seal Coating, Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Maintenance of bituminous surface road i)Repair to pot holes by removal of failed material, trimming the sides to vertical and levelling the bottom, cleaning the same with compressed air or any appropriate method, filled with B.M(using jhama brick aggregates & bitumen VG-30), after applyingprime coat at the bottom andtack coat on sides and on bottom ( using bitumen emulsion) and compacting , trimming, & finishing the surface to form a smooth continuous surface, all as per MoRD technical specification Clauses 1900, 502, 503 and 504. |
| 2 | WBM Grading 3/ Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading- 3 as per MoRD Technical Specification Clause 405. A) By Manual Means |
| 3 | Tack coat using hot straight run bitumen of grade VG-30 on bituminous surfaceProviding and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: On bituminous surface @ 0.50 Kg/ Sqm. |
| 4 | Tack coat using hot straight run bitumen of grade VG-30 on W.B.M.Providing and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: On W.B.M. @ 0.75 kg/ sqm. |
| 5 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscocity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508. |
| 6 | Seal Coat/ Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510. (A) By Manual Means, Case - IV : Type D (premix with fine sand) (I) Bitumen (60/70 Grade) VG-30 |
AI Tender Summary
Tender Timeline
May 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMay 18, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 18, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender