Supply And Installation Of 8 Mtr Mini Mast Light System With 4 Nos . Of 150 W Led Flood Lights At Kolothara Colony , Ward 13 Of Kumbalangi Grama Panchayat , Kochi Supply And Installation Of 8 Mtr Mini Mast Light System With 4 Nos . Of 150 W Led Fl
Tender Value
1.58 Lakhs
Estimated cost
Bid Submission
06 May 2021
0 days left
EMD
2380
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kumbalangi → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply And Installation Of 8 Mtr Mini Mast Light System With 4 Nos . Of 150 W Led Flood Lights At Kolothara Colony , Ward 13 Of Kumbalangi Grama Panchayat , Kochi
BOQ
| Name of Work:Supply and Installation of 8 Mtr Mini Mast Light System with 4 nos. of 150 W LED Flood Lights at Kolothara Colony, ward 13 of Kumbalangi Grama Panchayat, Kochi | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos existing RCC foundation and junction box etc, complete 8 Meters (90.15.1.1) | BI01010001010000000000000515BI0100001113 | 1 | Nos |
| 2 | 2 | 90.15.4.9\nSupply Conveyance, installation, testing and commissioning of 150W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip makeCree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-castPowder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | BI01010001010000000000000515BI0100001114 | 4 | Nos |
| 3 | 3 | Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dustand vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br>Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) (90.14.1.2 ) | BI01010001010000000000000515BI0100001115 | 2 | sqm |
| 4 | 4 | Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet (90.14.3.2) | BI01010001010000000000000515BI0100001116 | 7 | Mtr |
| 5 | 5 | Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board (90.14.5) | BI01010001010000000000000515BI0100001117 | 10 | Kg |
| 6 | 6 | od331150/2020_2021\nSupply and fixing of 25A 2 Pole AC 1 rated power contactor, 25A Connector, Digital timer, Suitable Copper socket, 2.5 sq. mm ISI marked FRLS PVC insulated single core copper conductor cable, 1.5 sq. mm ISI marked FRLS PVC insulated single core copper conductor cable, OBO Bettermann makes V25- B+ C/1+ NPE (switching/lightning protection) for single-phase protection.\n | BI01010001010000000000000515BI0100001118 | 1 | Nos |
| 7 | 7 | od331151/2020_2021\nSupply and fixing HRC fuse base of 20/32A using suitable nut and bolt, 32A 2-way neutral links mounted on DMC/SMC base and 2.5 sq. mm ISI marked FRLS PVC insulated single core copper conductor cable. | BI01010001010000000000000515BI0100001119 | 1 | Nos |
| 8 | 8 | 2.14.2\nSupplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residualcurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps\n | BI01010001010000000000000515BI0100001120 | 1 | Nos |
| 9 | 9 | 2.10.3\nSupplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole\n | BI01010001010000000000000515BI0100001121 | 1 | Nos |
| 10 | 10 | 2.10.1\nSupplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole\n | BI01010001010000000000000515BI0100001122 | 1 | Nos |
| 11 | 11 | 2.12.1\nSupplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps\n | BI01010001010000000000000515BI0100001123 | 1 | Nos |
| 12 | 12 | 90.6.5.11\nSupply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm\n | BI01010001010000000000000515BI0100001124 | 40 | Mtr |
| 13 | 13 | 5.3\nEarthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.\n | BI01010001010000000000000515BI0100001125 | 1 | set |
| 14 | 14 | 90.16.4.2\nSupply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 3 mm GI strip | BI01010001010000000000000515BI0100001126 | 4.5 | Mtr |
| 15 | 15 | 90.16.1.3\nSupply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) | BI01010001010000000000000515BI0100001127 | 8 | Mtr |
| 16 | 16 | 90.16.5.3\nSupply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) | BI01010001010000000000000515BI0100001128 | 6 | Nos |
| 17 | 17 | 90.12.5.3\nSupply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 10 sq mm | BI01010001010000000000000515BI0100001129 | 6 | Mtr |
| 18 | 18 | 90.12.9.2\nSupplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size | BI01010001010000000000000515BI0100001130 | 6 | Mtr |
| 19 | 19 | 9.1.2\nSupplying and making end termination with brass compression gland and aluminium lugs for followingsize of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm) | BI01010001010000000000000515BI0100001131 | 2 | set |
| 20 | 20 | 2.6.1\nEarth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil as per the drawing\n | BI01010001010000000000000515BI0100001132 | 1.4 | cum |
| 21 | 21 | 4.1.8\nProviding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)\n | BI01010001010000000000000515BI0100001133 | 0.10033 | cum |
| 22 | 22 | 5.9.1 \nCentering and shuttering including strutting, Ietc. And removal of form for:Foundations, footings, bases of coloumns, etc for mass concrete. | BI01010001010000000000000515BI0100001134 | 3.66 | sqm |
| 23 | 23 | 5.22.6\nSteel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more\n | BI01010001010000000000000515BI0100001135 | 28.337 | kg |
| 24 | 24 | 5.1.2\nProviding and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size\n | BI01010001010000000000000515BI0100001136 | 0.533 | cum |
| 25 | 25 | 13.1.1\n12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)\n | BI01010001010000000000000515BI0100001137 | 1.0026 | sqm |
| 26 | 26 | 2.25\nFilling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.\n | BI01010001010000000000000515BI0100001138 | 0.869 | cum |
| 27 | 27 | Charges for KSEB connection including all laison works (Actual Amount paid on production of receipt). | BI01010001010000000000000515BI0100001139 | 1 | Nos |
| 28 | 28 | Fabrication ,supply, conveyance and installation of Granite name board indicating the cost involved, the commencement, completion and inauguration date etc. | BI01010001010000000000000515BI0100001140 | 1 | Nos |
| 29 | 29 | Supply and fixing of Name Board with Angles, Flats, Square pipe, ACP Sheet including Nut & Bolt. | BI01010001010000000000000515BI0100001141 | 1 | Nos |
AI Tender Summary
Tender Timeline
Apr 29, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMay 06, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 07, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender