Constructing Compound Wall And Water Supply At Primary Health Subcenter Chikhalgaon Tal Dapoli Dist Ratnagiri ( For Majoor Sahakari Sanstha Only )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 May 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dapoli → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructing Compound Wall And Water Supply At Primary Health Subcenter Chikhalgaon Tal Dapoli Dist Ratnagiri ( For Majoor Sahakari Sanstha Only )
BOQ
| Sl. No. | Item Description |
| 1 | Removing wire fencing withiron/ C.C. fencing postandstacking the materials as directed with all leads, lifts etc. complete. |
| 2 | Excavationfor foundationin Hardrock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyondthebuildingareastackingasdirected,dewateringandbackfillingwithavailable earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means |
| 3 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/gneissmetalforfoundationandbeddingincludingbailingoutwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredandcuringcomplete,withfullyautomaticmicroprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) |
| 4 | Providing laterite stone masonry in cm 1:6 in foundation and plinth including striking joints on unexposed faces and watering etc complete |
| 5 | Providing laterite stone masonry in cm 1:6 in superstructure including striking joints where plastering is to be done , watering and scaffolding etc complete |
| 6 | Providing andlaying Castinsitu/ReadyMixcement concrete M-15oftrap/ granite/quartzite/gneissmetalforcoping to plinthorparapet,mouldedorchamferedasper drawingorasdirectedincludingsteelcentering,plywood/steelformworkcompacting, rougheningthemifspecialfinishistobeprovided,finishingunevenandhoneycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) |
| 7 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 8 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 9 | Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. |
| 10 | )cement standred consistancy Fineness specific gravity setting Time (Inital and Final) comprresive strength |
| 11 | Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one Number direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back sidegraystoveenamelled,bondedwithcutoutofredRetroreflectivesheetEngineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strengthG.I.boltsandnutsofsize10mmdia.and20mmlongincludingalltaxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade |
AI Tender Summary
Tender Timeline
Apr 28, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMay 04, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 06, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender