Providing Sewerage System To Village Kalpa In Distt . Kinnaur H . P . Ljt Of Di Pipe 150 Mm Dia , Co 603 Nos . Manhole Chambers In Brick Masonary , Provision For House Connections , Pf Rcc Spun Vent Shaft And Pf Flushing Tank
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 May 2021
0 days left
EMD
3.13 Lakhs
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reckong Peo → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Sewerage System To Village Kalpa In Distt . Kinnaur H . P . Ljt Of Di Pipe 150 Mm Dia , Co 603 Nos . Manhole Chambers In Brick Masonary , Provision For House Connections , Pf Rcc Spun Vent Shaft And Pf Flushing Tank
BOQ
| Name of Work: Providing Sewerage System to Village Kalpa in Distt. Kinnaur (H.P) (SH:- Laying, jointing & testing of D.I. Pipe K7 150mm dia, C/O 603 Nos. Manhole Chamber in Brick Masonary, Provision for House connections, P/F RCC Spun Vent Shaft & P/F Flushing Tank). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation and trenches (For pipes and pits) up to all depths and in all classification of earth work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling or wedging out of soft/hard rock , where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting , planking, timbering and dewatering where ever required. Stacking usable and unusable material/soil seperataly and after laying, jointing and testing of pipes, returning the usable soil in 15cm layers by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed within all leads/ lifts including cost of diversion for traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects within all leads and lifts as per direction of the Engineer-in-charge. | 12533.8 | Cum | |
| 2 | 2 | Laying, jointing and testing in trenches centrifugally cast (spun) ductile iron pipes conforming to BIS 8329-2000 (latest with up to date amendments) in a length of 5.50 meters of following class and diameter with cement mortor lining in side duty ISI marked including cost of Tyton (push or joints) fittings including testing of joints and rubber gasket (SBR quality) conforming to IS-92820-1989 (Earth work in trenches to be measured and paid for separetely) with in all lead and lifts.\n | |||
| 3 | 2.01 | 150 mm Dia K7 | 17678 | Rmt | |
| 4 | 3 | Providing and laying cement concrete 1: 4:8 ( 1Cement : 4 Sand : 8 graded stone agg. 40 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth with in all lead and lifts.\n | 84.86 | Cum | |
| 5 | 4 | Providing and laying cement concrete 1:2:4 ( 1Cement : 2 Sand : 4 graded stone agg. 20 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth with in all lead and lifts. | 91.98 | Cum | |
| 6 | 5 | Providing and laying cement concrete 1:2:4 ( 1Cement : 2 Sand : 4 graded stone agg. 20 mm nominal size ) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landing & shelves and their support balconies, beams, girders,bressumers and contilver upto floor two level with in all lead and lifts. | 86.16 | Cum | |
| 7 | 6 | Providing tor steel reinforcement for RCC work including bending , binding & placing in poistion complete upto floor two level with in all lead and lifts. | 6934.5 | Kg | |
| 8 | 7 | Brick work using common burnt clay building bricks in foundation & plinth in 1 : 4 ( 1 cement : four sand) mortar with in all lead and lifts. | 473.81 | Cum | |
| 9 | 8 | 15 mm thick cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor tow level including arrises , internal rounded angles , chamfers , and or rounded angles not exceeding 80 mm in grith and fnished even and smooth.cement mortor 1: 3 ( 1 cement : 3 sand) with in all lead and lifts. | 3774 | Sqm | |
| 10 | 9 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fairfinish I/c centring , shuttering , strutting and proping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4m and removal of the same for insitureinforced concrete & plain concrete work in Flat Slab with in all lead and lifts.\n | 1959.75 | Sqm | |
| 11 | 10 | Providing and Laying DI Bend Class K7 jointed various Degree with S.B.R. Tyton push on joint of 150 mm dia with in all lead and lifts.\n | 300 | Each | |
| 12 | 11 | Providing and Laying D.I. Y Connection Class K7 jointed with S.B.R. Tyton push on joint of 150 mm dia with in all lead and lifts. | 300 | Each | |
| 13 | 12 | Providing and Laying DI plug Class K7 jointed with S.B.R. Tyton push on joint of 150 mm dia with in all lead and lifts.\n | 300 | Each | |
| 14 | 13 | Providing RCC Spun vent shaft with cowl 140mm and 200mm internal and external diameter respectively and top 300mm and 450mm internal and external diameter with in all lead and lifts. | 20 | Each | |
| 15 | 14 | Manufacturing supplying and fixing of 1000 ltrs capacity( having Size 1.00X1.00X1.00 Mtrs) MS flushing tank making with MS Sheet 3.15 mm thick cost including inlet and out let flanged pipes with sluice valve and flushing pipe. The cost of tank should be include all cutting ,welding, carriage and assembling etc complete with the entire satisfaction of Engineer-in-charge with in all lead and lifts. | 14000 | Per/Ltrs | |
| 16 | 15 | Providing and fixing precast concrete manhole cover & frame conforming to IS-12593-1988, part-I and IS 12592-1991, part-II, 560mm diameter with in all lead and lifts. | |||
| 17 | 15.01 | Heavy duty with in all lead and lifts. | 100 | Each | |
| 18 | 15.02 | Medium duty with in all lead and lifts. | 503 | Each |
AI Tender Summary
Tender Timeline
Apr 28, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMay 11, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 12, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender