8101/2021-22/E8 Repairs To Steel Furnitre At Bso Yard Karu Under Ge 860 Ews Repairs To Steel Furnitre At Bso Yard Karu Under Ge 860 Ews
Tender Value
31.65 Lakhs
Estimated cost
Bid Submission
10 May 2021
0 days left
EMD
63300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karu → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
8101/2021-22/E8 Repairs To Steel Furnitre At Bso Yard Karu Under Ge 860 Ews Repairs To Steel Furnitre At Bso Yard Karu Under Ge 860 Ews
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-May-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-May-2021 |
BOQ
| Name of Work: REPAIRS TO STEEL FURNITRE AT BSO YARD KARU UNDER GE 860 EWS | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Almirah Large Steel \n(FD-67(M), FD-350/1031/1033 | |||
| 2 | 1.01 | S&F in repairs legs and providing new by welding made out of 1mm thick MS Sheet duly welded including preparation of surface into required shape for almirah large steel, rest all as shown on drg and as directed by Engr-in-Charge. | 172 | Each | |
| 3 | 1.02 | S & F in repairs locking device including replacement of brass 6 lever locks Make-Godrej iron body with duplicate keys chromium plated , rest all as shown on drg and as directed by Engr-in-Charge. | 120 | Each | |
| 4 | 1.03 | S&F in repairs Stainless steel handle of size 150 mm grip length with both sides screwed , rest all as shown on drg and as directed by Engr-in-Charge. | 70 | Each | |
| 5 | 1.04 | Repairs to door as specified including replacement of hinges all as shown on drawing and as directed by Engr-in-charge | 172 | Each | |
| 6 | 1.05 | S&F in repairs shelves with MS sheet CRC 1mm thick bent to shape including welding to the almirahs, rest all as shown on drg and as directed by Engr-in-Charge. | 280 | Each | |
| 7 | 1.06 | S & F in repair MS Clamp for proper fixing & readjustment of shelves as directed by Engr-in-charge. | 504 | Each | |
| 8 | 1.07 | Repair to existing shelf including welding as directed by Engr-in-charge. | 74 | Each | |
| 9 | 1.08 | M & L for welding of broken joints of Almirah with shelves continuously 50mm to 75mm long for smooth finish through gas welding including preparation of surface and applying two coat of Synthetic enamal paint with spray gun over a coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge. | 90 | Each | |
| 10 | 2 | Almirah Medium / Small Steel \nFD-243, Fd-1032, FD-1034 | |||
| 11 | 2.01 | S&F in repairs legs and providing new by welding made out of 18 gauge MS Sheet into required shape for almirah medium/small steel , rest all as shown on drg and as directed by Engr-in-Charge. | 200 | Each | |
| 12 | 2.02 | S & F in repairs locking device including replacement of brass 6 lever locks Make:-Godrej iron body with duplicate keys chromium plated , rest all as shown on drg and as directed by Engr-in-Charge. | 150 | Each | |
| 13 | 2.03 | S&F in repairs Stainless steel handle of size 150 mm grip length with both sides screwed to , rest all as shown on drg and as directed by Engr-in-Charge. | 125 | Each | |
| 14 | 2.04 | Repairs to door as specified including replacement of hinges all as shown on drawing and as directed by Engr-in-charge | 400 | Each | |
| 15 | 2.05 | S&F in repairs shelves for with MS sheet CRC 1mm thick bent to shape including welding to the almirahs, rest all as shown on drg and as directed by Engr-in-Charge. | 315 | Each | |
| 16 | 2.06 | Repair to existing shelf including welding | 232 | Each | |
| 17 | 2.07 | M & L for welding of broken joints of Almirah continuously 50mm to 75mm long for smooth finish through gas welding including preparation of surface and applying two coat of Synthetic enamal paint with spray gun over a coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge. | 104 | Each | |
| 18 | 3 | Locker Bed Side Steel\nFD-1029 | |||
| 19 | 3.01 | S&F in repair to leg made out of 18 guage MS Sheet complete including preparation of surface & applying two coats of synthetic enamel paint with spray gun over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge. | 440 | Each | |
| 20 | 3.02 | S&F in repair to MS butt Hinges 75mm long all as shown on Drg and as directed by Engr-in-charge | 324 | Each | |
| 21 | 3.03 | S&F in repair to Stainless steel Handle 100mm long all as shown on Drg and as directed by Engr-in-charge | 842 | Each | |
| 22 | 3.04 | S&F in repair to Chromium plated Hasp & Staple of size 75mmx40mmx3mm all as shown on Drg and as directed by Engr-in-charge | 610 | Each | |
| 23 | 3.05 | M & L for welding of broken joints of Locker Steel including preparation of surface & applying two coats of smoke gray/Olive green synthetic enamel paint with spray gun over a coat of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge. | 348 | Each | |
| 24 | 4 | Table Office Officer Steel \nFD-84/ 1003 | |||
| 25 | 4.01 | S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge. | 85 | Each | |
| 26 | 4.02 | S&F in repairs top with 18mm thick prelaminated particle board exterior grade conforming to IS - 12823 of approved make one side teak facing and balancing white on other side all the four edges provided with 4mm thick first class teak wood beading, rest all as shown on drg and as directed by Engr-in-Charge. | 62 | Each | |
| 27 | 4.03 | S & F MS Lock (6 liver brass levers) Make:-Godrej with duplicate keys for drawers, rest all as shown on drg and as directed by Engr-in-Charge. | 50 | Each | |
| 28 | 4.04 | M & L for repair including welding and replacement of heavy duty spring with new as per existing locking device to make functional for smoothly play of drawers in its original position, rest all as shown on drg and as directed by Engr-in-Charge. | 62 | Each | |
| 29 | 4.05 | S&F in repair to Leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over two coats of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge. | 92 | Each | |
| 30 | 4.06 | S & F Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge. | 250 | Each | |
| 31 | 5 | Table Office clerk Steel \nFD-84/ 381, FD-1004 | |||
| 32 | 5.01 | S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship including preparation of surface & applying two coats of synthetic enamel paint with spray gun over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge. | 95 | Each | |
| 33 | 5.02 | S&F in repairs top with 18mm thick prelaminated particle board exterior grade conforming to IS - 12823 of approved make one side teak facing and balancing white on other side all the four edges provided with 4mm thick first class teak wood beading, rest all as shown on drg and as directed by Engr-in-Charge. | 152 | Each | |
| 34 | 5.03 | S & F MS Lock (6 liver brass levers) Make:-Godrej with duplicate keys for drawers, as per approved sample & as directed by Engr-in-charge. | 120 | Each | |
| 35 | 5.04 | M & L for repair including welding and replacement of heavy duty spring with new as per existing locking device to make functional for smoothly play of drawers in its original position, rest all as shown on drg and as directed by Engr-in-Charge. | 76 | Each | |
| 36 | 5.05 | S&F in repair to leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coat of red oxide primer to match with existing shade etc to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge. | 120 | Each | |
| 37 | 5.06 | S&F Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge. | 600 | Each | |
| 38 | 6 | Table Dining ORs\nFD-165(M) | |||
| 39 | 6.01 | M&L in repair to leg made out of 25mm square pipe having wall thickness 1.6mm complete including preparation of surface & applying two coats of black/olive green synthetic enamel paint with spray gun over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge. | 100 | Each | |
| 40 | 6.02 | M&L for welding of broken joints including preparation of surface and applying two coat of black/olive green synthetic enamel paint with spray gun over a coat of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge. | 96 | Each | |
| 41 | 6.03 | S & F in repair top made out of 19mm thick Marine plywood BWP confirmed to IS-710 of approved make complete with 22 gauge aluminium sheet on top, rest all as shown on drg and as directed by Engr-in-Charge. | 62 | Each | |
| 42 | 6.04 | S&F Hard rubber toes of superior quality as specified and as directed by Engr-in-charge. | 232 | Each | |
| 43 | 7 | Chair revolving high back/low back/executive/computer with arm/without arm\nFD-75(M) & CWE/FD-01/2000 | |||
| 44 | 7.01 | S & F in repairs of maintenance free Gas lift for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge. | 87 | Each | |
| 45 | 7.02 | S & F in repairs of Padestal assy. Injection moulded in black 30% glass filled nylon , 50mm MS castor pin is of press fitted to each prong for holding the castor,for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge. | 65 | Each | |
| 46 | 7.03 | S & F in repairs of twin wheel castors for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge. | 54 | Each | |
| 47 | 7.04 | S & F in repairs of PU seat & back duly upholstered with best quality Acrylic/polyester febric complete for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge. | 80 | Each | |
| 48 | 7.05 | S & F in repairs of handles of chair revolving made of black integeral skin polyurethane reinforced with MS insert scratch proof complete for all type of chairs revolving with arm rest all as shown on drg and as directed by Engr-in-Charge. | 60 | Each | |
| 49 | 8 | Charpoy GI pipe Nylon Newar \nFD-220 or similar drawing | |||
| 50 | 8.01 | S & F in repairs 32mm dia ISI medium grade of approved make, long rail for GI Chapoy pipe including removing unserviceable long rail, rest all as shown on drg and as directed by Engr-in-Charge. | 60 | Each | |
| 51 | 8.02 | Making short rail for GI Charpoy obtained from item No 8.01 here-in-before cut in to length and threading including removing of existing unserviceable short rails all as specified and directed. | 48 | Each | |
| 52 | 8.03 | Making leg for GI charpoy from short rail obtained from item No. 8.02 here-in-before end threading other end provided with MNF clamp suitable for 19mm dia conduit pipe 3mm base plale welded at bottom and fixed in repairs as required as per drg. | 80 | Each | |
| 53 | 8.04 | S&F in repairs MS Check nuts, rest all as shown on drg and as directed by Engr-in-Charge. MS Check nut as per drg. | 100 | Each | |
| 54 | 8.05 | S&F in repairs GI Elbow 32 mm dia three way medium grade, rest all as shown on drg and as directed by Engr-in-Charge. | 200 | Each | |
| 55 | 8.06 | Removing existing unserviceable / old tape newar nylon from charpoy GI/IP, all are of MES pattern and cleaning the frames and retaping with approved Ist qualitywhite newar tape nylon Make:-Primer/Binny of size 50 to 55mm wide including tightening of loose components all as per drawing and as directed by Engr-in-charge. (Weight of tape newar nylon shall not be less than 1.50 kg per charpoy) | 100 | Each | |
| 56 | 9 | Chair Verandah\n(FD-229 or similar drawing)\nRemoval of unserviceable cane from Chair, scraping existing paint from frame with sand paper and M&L for painting with two coats of synthetic enamel paint colour in white with spray gun and M&L for recaning with white plastic cane 4mm wide, including replacing of hard rubber toes etc complete all as specified and as directed by Engr-in-Charge | 30 | Each\nJob | |
| 57 | 10 | Charpoy hard top MAP\n(FD/E6/Map/04)\nM&L removing of existing unserviceable / broken plywood from charpoy IP hard top and supply and fixing new 12mm thick commercial plywood of size 1950x900mm of approved make as specified. | 200 | Each\nJob | |
| 58 | 11 | Chair CB Steel with Arm/Without Arm \nFD-75(M) | |||
| 59 | 11.01 | S & F in repairs of seat frame (wooden) of Chair CB Steel with arms duly caned, including painting the the frame with two coats black synthetic enamel paint with spray gun over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge. | 104 | Each | |
| 60 | 11.02 | S & F in repairs of back frame (wooden) of Chair CB Steel with arms duly caned, including painting the the frame with two coats black synthetic enamel paint with spray gun over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge. | 104 | Each | |
| 61 | 11.03 | S & F in repairs of seat frame (wooden) of Chair CB Steel with out arms duly caned, including painting the the frame with two coats black synthetic enamel paint with spray gun over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge. | 5 | Each | |
| 62 | 11.04 | S & F in repairs of back frame (wooden) of Chair CB Steel with out arms duly caned, including painting the the framewith two coats black synthetic enamel paint with spray gun over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge. | 5 | Each | |
| 63 | 11.05 | S & F in repairs of handle (wooden) of Chair CB Steel with arms , including painting the the handle with two coats black synthetic enamel paint with spray gun over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge. | 208 | Each | |
| 64 | 11.06 | M & L for welding of broken joints continuously for smooth finish through gas welding including preparation of surface and applying two coat of Synthetic enamal paint with spray gun over a coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge. | 80 | Each | |
| 65 | 12 | Computer Table 2.5' x 1.5'\nTP | |||
| 66 | 12.01 | S & F in repairs Table top as per existing size with 19mm thick BWR grade plywood for computer top complete all as specified and directed by Engr-in-charge. | 7 | Each | |
| 67 | 12.02 | Removing the unserviceable / broken top ( Channel 12\" in drawer) and providing new channel including fixing it complete all as specified and directed by Engr-in-charge. | 6 | Each | |
| 68 | 13 | Removal of existing worn out painting with acid from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint smoke grey/Olive green/White with spray gun over a coat of red oxide primer rest all as shown on drg and as directed by Engr-in-Charge. | |||
| 69 | 13.01 | Almirah large steel 1/2 H 1/2 Self \nFD-114(M), FD-1033 & MAP type | 5 | Each | |
| 70 | 13.02 | Almirah steel large with shelves\nFD-351 | 120 | Each | |
| 71 | 13.03 | Almirah steel medium with shelves\nFD-350 | 200 | Each | |
| 72 | 13.04 | Chair CB steel with arms\nFD-75(M) | 100 | Each | |
| 73 | 13.05 | Chair CB Steel without arms\nFD-75(M) | 5 | Each | |
| 74 | 13.06 | Book Case Steel\nFD-1028 | 20 | Each | |
| 75 | 13.07 | Locker Steel \nFD-257, FD-1029 | 1000 | Each | |
| 76 | 13.08 | Rack steel adjustable three tiers (711 X 655 X 254 mm)\nFD-106(M) | 20 | Each | |
| 77 | 13.09 | Table Office Officer steel\nFD-1003/84 | 70 | Each | |
| 78 | 13.1 | Table Office clerk steel \nFD-1004/381 | 100 | Each | |
| 79 | 13.11 | Teapoy verandah(Painting in white colour)\nFD-255 | 2 | Each | |
| 80 | 13.12 | Table dining OR's\nFD-165(M) | 65 | Each | |
| 81 | 13.13 | Computer table\n(TP) | 6 | Each |
AI Tender Summary
Tender Timeline
May 03, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
May 10, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 10, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 12, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender