Construction Of Cable Landng Stn At Te Paravur Construction Of Cable Landing Station In The First Floor Of T E Paravur Under Kli Submarine Cable Project, North Paravur-Kerala

TDR : 27760806

Tender Notice
BOQ

Expired

North Paravur , Kerala

Tender Brief : Construction Of Cable Landng Stn At Te Paravur Construction Of Cable Landing Station In The First Floor Of T E Paravur Under Kli Submarine Cable Project

Document Fees
₹ 1180 /-

EMD
Refer document

Tender Value
Refer document

Submission Date
08-05-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Construction of Cable Landing Station in the First Floor of T.E. PARAVUR under KLI Submarine Cable Project
1	1	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal/spreading of excavated earth, lead up to 50m/within compound and lift up to 1.5m,as directed by Engineer-in-Charge.	BI01010001010000000000000515BI0100001114
2	1.1	All kinds of soil	BI01010001010000000000000515BI0100001115	41	Cum
3	2	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal/spreading of surplus excavated soil as directed, within a lead of 50 m/within compound.	BI01010001010000000000000515BI0100001116
4	2.1	All kinds of soil.	BI01010001010000000000000515BI0100001117	101	Cum
5	3	Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing/spreading of surplus excavated soil as directed, within a lead of 50 m/within compound : \na)All kinds of soil	BI01010001010000000000000515BI0100001118
6	3.1	Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia	BI01010001010000000000000515BI0100001119	10	metre
7	4	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.	BI01010001010000000000000515BI0100001120	23	Cum
8	5	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :	BI01010001010000000000000515BI0100001121
9	5.1	1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size)	BI01010001010000000000000515BI0100001122	11	Cum
10	5.2	1:5:10 (1 cement : 5 coarse sand(zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size )	BI01010001010000000000000515BI0100001123	13	Cum
11	6	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :	BI01010001010000000000000515BI0100001124
12	6.1	1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)	BI01010001010000000000000515BI0100001125	43	Cum
13	7	Centering and shuttering including strutting, propping etc. and removal of form for :	BI01010001010000000000000515BI0100001126
14	7.1	Foundations, footings, bases of columns, etc. for mass concrete	BI01010001010000000000000515BI0100001127	40	Sqm
15	7.2	Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.	BI01010001010000000000000515BI0100001128	420	Sqm
16	8	Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels/slabs not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) : 3 graded stone aggregate 20 mm nominal size).	BI01010001010000000000000515BI0100001129	9	Cum
17	9	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.	BI01010001010000000000000515BI0100001130
18	9.1	Thermo-Mechanically Treated bars of grade Fe-500D or more.	BI01010001010000000000000515BI0100001131	3900	Kg
19	10	Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).	BI01010001010000000000000515BI0100001132	25	Sqm
20	11	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:	BI01010001010000000000000515BI0100001133
21	11.1	Cement mortar 1:6 (1 cement : 6 coarse sand)	BI01010001010000000000000515BI0100001134	6	Cum
22	12	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :	BI01010001010000000000000515BI0100001135
23	12.1	Cement mortar 1:6 (1 cement : 6 coarse sand)	BI01010001010000000000000515BI0100001136	2	Cum
24	13	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.	BI01010001010000000000000515BI0100001137	15	Nos.
25	14	Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :	BI01010001010000000000000515BI0100001138
26	14.1	300x10 mm	BI01010001010000000000000515BI0100001139	11	Nos.
27	14.2	150x10 mm	BI01010001010000000000000515BI0100001140	15	Nos.
28	15	Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :	BI01010001010000000000000515BI0100001141
29	15.1	100 mm	BI01010001010000000000000515BI0100001142	8	Nos.
30	15.2	75 mm	BI01010001010000000000000515BI0100001143	4	Nos.
31	16	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.	BI01010001010000000000000515BI0100001144
32	16.1	Twin rubber stopper	BI01010001010000000000000515BI0100001145	12	Nos.
33	17	Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge	BI01010001010000000000000515BI0100001146
34	17.1	Extruded section profile size 48x40 mm	BI01010001010000000000000515BI0100001147	10	metre
35	18	Providing and fixing to existing door frames.	BI01010001010000000000000515BI0100001148
36	18.1	24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).	BI01010001010000000000000515BI0100001149	3	Sqm
37	19	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	BI01010001010000000000000515BI0100001150	300	Kg
38	20	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.	BI01010001010000000000000515BI0100001151
39	20.1	40 mm thick with 20 mm nominal size stone aggregate	BI01010001010000000000000515BI0100001152	5	Sqm
40	21	Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete.	BI01010001010000000000000515BI0100001153	82	Sqm
41	22	Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.	BI01010001010000000000000515BI0100001154	27	Sqm
42	23	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.	BI01010001010000000000000515BI0100001155
43	23.1	Size of Tile 600x600 mm	BI01010001010000000000000515BI0100001156	200	Sqm
44	24	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.	BI01010001010000000000000515BI0100001157
45	24.1	Size of Tile 600x600 mm	BI01010001010000000000000515BI0100001158	7	Sqm
46	25	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.	BI01010001010000000000000515BI0100001159
47	25.1	Granite work	BI01010001010000000000000515BI0100001160	14	Metre
48	26	Providing and fixing 2 mm thick antistatic polyvinyl chloride sheet of superior quality (Armstrong or equivalent) in flooring and skirting in approved pattern on a smooth and damp proof surface using rubber based adhesive of approved quality and manufacturer like Dunlop S-758, Fevicol SR 998 or equivalent including providing with cup washers along with periphery of the room or at the required places for earthing of flooring and rolling with light wooden roller weighing about 5kg all complete as directed by the Engineer-in-charge, in approved colour and shade	BI01010001010000000000000515BI0100001161	160	Sqm
49	27	Wax polishing of existing mosaic tile floor including grinding floor/steps/risers of steps with approved quality wax polish as per the direction of engineer in charge	BI01010001010000000000000515BI0100001162	290	Sqm
50	28	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :	BI01010001010000000000000515BI0100001163
51	28.1	12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks)	BI01010001010000000000000515BI0100001164	230	Sqm
52	29	Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.\nNote: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).	BI01010001010000000000000515BI0100001165
53	29.1	12 mm average thickness.	BI01010001010000000000000515BI0100001166	30	Sqm
54	30	12 mm cement plaster of mix :	BI01010001010000000000000515BI0100001167
55	30.1	1:6 (1 cement: 6 fine sand)	BI01010001010000000000000515BI0100001168	20	Sqm
56	31	Neat cement punning	BI01010001010000000000000515BI0100001169	10	Sqm
57	32	Distempering with first quality acrylic distemper of approved brand and manufacture to give an even shade.	BI01010001010000000000000515BI0100001170
58	32.1	Old work (one or more coats) .	BI01010001010000000000000515BI0100001171	1670	Sqm
59	33	Painting with synthetic enamel paint of approved quality and colour to give an even shade	BI01010001010000000000000515BI0100001172
60	33.1	On old work (one or more coats)	BI01010001010000000000000515BI0100001173	250	Sqm
61	34	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.	BI01010001010000000000000515BI0100001174	160	Sqm
62	35	Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.	BI01010001010000000000000515BI0100001175
63	35.1	One coat.	BI01010001010000000000000515BI0100001176	480	Sqm
64	35.2	Two coats.	BI01010001010000000000000515BI0100001177	310	Sqm
65	36	Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.	BI01010001010000000000000515BI0100001178
66	36.1	With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.	BI01010001010000000000000515BI0100001179	310	Sqm
67	37	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.	BI01010001010000000000000515BI0100001180	300	Sqm
68	38	Finishing walls with Acrylic Smooth exterior paint of required shade :	BI01010001010000000000000515BI0100001181
69	38.1	Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).	BI01010001010000000000000515BI0100001182	300	Sqm
70	39	Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :	BI01010001010000000000000515BI0100001183
71	39.1	Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.	BI01010001010000000000000515BI0100001184	920	Sqm
72	40	White washing with lime to give an even shade.	BI01010001010000000000000515BI0100001185
73	40.1	Old work (one or more coats)	BI01010001010000000000000515BI0100001186	400	Sqm
74	41	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.	BI01010001010000000000000515BI0100001187
75	41.1	With cement mortar 1:4 (1 cement : 4 fine sand).	BI01010001010000000000000515BI0100001188	10	Sqm
76	42	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete	BI01010001010000000000000515BI0100001189	190	Sqm
77	43	Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.	BI01010001010000000000000515BI0100001190	4	Nos.
78	44	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.	BI01010001010000000000000515BI0100001191
79	44.1	Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)	BI01010001010000000000000515BI0100001192	7	Cum
80	45	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..	BI01010001010000000000000515BI0100001194
81	45.1	In cement mortar	BI01010001010000000000000515BI0100001195	2	Cum
82	46	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.	BI01010001010000000000000515BI0100001196
83	46.1	For thickness of tiles 10 mm to 25 mm	BI01010001010000000000000515BI0100001197	110	Sqm
84	47	Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.	BI01010001010000000000000515BI0100001198	4	Nos.
85	48	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.	BI01010001010000000000000515BI0100001199	10	Sqm
86	49	Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.	BI01010001010000000000000515BI0100001200	60	Sqm
87	50	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.	BI01010001010000000000000515BI0100001201	100	Cum
88	51	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :	BI01010001010000000000000515BI0100001202
89	51.1	Of area 3 sq. metres and below	BI01010001010000000000000515BI0100001203	2	No.
90	52	Making opening (area upto 0.1 sqm) in RCC slab including cutting steel bars and finishing the sides and as per the direction of engineer in charge.	BI01010001010000000000000515BI0100001204	2	No.
91	53	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).	BI01010001010000000000000515BI0100001205	2	Cum
92	54	Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required:	BI01010001010000000000000515BI0100001206
93	54.1	White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests	BI01010001010000000000000515BI0100001207	2	Nos.
94	55	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :	BI01010001010000000000000515BI0100001208
95	55.1	W.C. pan with ISI marked white solid plastic seat and lid	BI01010001010000000000000515BI0100001209	2	No.
96	56	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:	BI01010001010000000000000515BI0100001210
97	56.1	White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap	BI01010001010000000000000515BI0100001211	4	Nos.
98	57	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.	BI01010001010000000000000515BI0100001212
99	57.1	Flexible pipe 40 mm dia	BI01010001010000000000000515BI0100001213	4	Nos.
100	58	Providing and fixing PVC floor trap of approved quality and make, with PVC screwed down or hinged grating, with or without vent arm couple, of self cleansing design of 150 X 150mm size and locking with PVC, half round strainer with provision of 1 to 3 waste inlets & outlets of range 75 to 40mm dia. for different appliances , all complete including cost of cutting and making good the walls and floors etc.	BI01010001010000000000000515BI0100001214
101	58.1	100mm inlet and 75mm outlet	BI01010001010000000000000515BI0100001215	5	Nos.
102	59	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :	BI01010001010000000000000515BI0100001216
103	59.1	Rectangular shape 453x357 mm	BI01010001010000000000000515BI0100001217	4	Nos.
104	60	Providing and fixing C.P. brass towel rail complete with brackets fixed to wooden cleats with CP brass screws.	BI01010001010000000000000515BI0100001218
105	60.1	20mm dia towel rail of length 600mm with two C.P. brass brackets.	BI01010001010000000000000515BI0100001219	2	Nos.
106	61	Providing and fixing toilet paper holder :	BI01010001010000000000000515BI0100001220
107	61.1	C.P. brass	BI01010001010000000000000515BI0100001221	2	Nos.
108	62	Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.	BI01010001010000000000000515BI0100001222	2	Nos.
109	63	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.	BI01010001010000000000000515BI0100001223	2	Nos.
110	64	Providing and fixing 15 mm dia C.P brass health faucet including CP brass connection pipe of required length, holding clamp etc. of best quality and make as approved by Engineer - in - charge.	BI01010001010000000000000515BI0100001224
111	64.1	Jaquar Brass Health Faucet with Long Cp Flexible Tube (Chrome Finish, 15 mm)	BI01010001010000000000000515BI0100001225	2	Nos.
112	65	Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet :	BI01010001010000000000000515BI0100001226
113	65.1	250x130x30 mm	BI01010001010000000000000515BI0100001227	2	Pair
114	66	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall	BI01010001010000000000000515BI0100001228
115	66.1	20 mm nominal outer dia. Pipes.	BI01010001010000000000000515BI0100001229	10	metre
116	66.2	25 mm nominal outer dia .Pipes.	BI01010001010000000000000515BI0100001230	15	metre
117	66.3	32 mm nominal outer dia. Pipes.	BI01010001010000000000000515BI0100001231	15	metre
118	67	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.	BI01010001010000000000000515BI0100001232
119	67.1	20 mm nominal outer dia .Pipes.	BI01010001010000000000000515BI0100001233	15	metre
120	67.2	25 mm nominal outer dia .Pipes.	BI01010001010000000000000515BI0100001234	15	metre
121	68	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :	BI01010001010000000000000515BI0100001235
122	68.1	25 to 40 mm nominal bore	BI01010001010000000000000515BI0100001236	1	No.
123	69	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :	BI01010001010000000000000515BI0100001237
124	69.1	25 mm nominal bore	BI01010001010000000000000515BI0100001238	2	Nos.
125	69.2	32 mm nominal bore.	BI01010001010000000000000515BI0100001239	1	Nos.
126	70	Providing and fixing uplasticised PVC connection pipe with brass unions :	BI01010001010000000000000515BI0100001240
127	70.1	45 cm length ,15 mm nominal bore	BI01010001010000000000000515BI0100001241	10	Nos.
128	71	Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.	BI01010001010000000000000515BI0100001242
129	71.1	15 mm nominal bore	BI01010001010000000000000515BI0100001243	4	Nos.
130	72	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.	BI01010001010000000000000515BI0100001244
131	72.1	15 mm nominal bore.	BI01010001010000000000000515BI0100001245	2	Nos.
132	73	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :	BI01010001010000000000000515BI0100001246
133	73.1	15mm nominal bore	BI01010001010000000000000515BI0100001247	8	Nos.
134	74	Providing and fixing PTMT grating of approved quality and colour.	BI01010001010000000000000515BI0100001248
135	74.1	Rectangular type with openable circular lid. \n150 mm nominal size square 100 mm diameter of the inner hinged round grating. \n	BI01010001010000000000000515BI0100001249	6	Nos.
136	75	Providing and fixing C P brass soap Dish Holder of approved shape and size	BI01010001010000000000000515BI0100001250	2	Nos.
137	76	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, \n(i)Single socketed pipes. \n	BI01010001010000000000000515BI0100001251
138	76.1	75 mm diameter	BI01010001010000000000000515BI0100001252	16	metre
139	76.2	110 mm diameter	BI01010001010000000000000515BI0100001253	20	metre
140	77	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.	BI01010001010000000000000515BI0100001254
141	77.1	75x75x75 mm single tee with door	BI01010001010000000000000515BI0100001255	4	Nos.
142	77.2	110x110x110 mm single tee with door	BI01010001010000000000000515BI0100001256	4	Nos.
143	77.3	75x75x75 mm single tee without door	BI01010001010000000000000515BI0100001257	4	Nos.
144	77.4	110x110x110 mm single tee without door	BI01010001010000000000000515BI0100001258	4	Nos.
145	77.5	75 mm bend	BI01010001010000000000000515BI0100001259	8	Nos.
146	77.6	110 mm bend	BI01010001010000000000000515BI0100001260	4	Nos.
147	77.7	75 mm vent cowl with wire mesh	BI01010001010000000000000515BI0100001261	2	Nos.
148	77.8	110 mm vent cowl with wire mesh	BI01010001010000000000000515BI0100001262	2	Nos.
149	78	Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :	BI01010001010000000000000515BI0100001263
150	78.1	For pipes 100 to 250 mm diameter	BI01010001010000000000000515BI0100001264	1	Nos.
151	79	Supplying and filling manufactured sand around engine bed.	BI01010001010000000000000515BI0100001265	6	Cum
152	80	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :	BI01010001010000000000000515BI0100001266
153	80.1	For fixed portion\nAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)	BI01010001010000000000000515BI0100001267	1640	Kg
154	80.2	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). \nAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)	BI01010001010000000000000515BI0100001268	200	Kg
155	81	Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.	BI01010001010000000000000515BI0100001269
156	81.1	Pre-laminated particle board with decorative lamination on both sides.	BI01010001010000000000000515BI0100001270	220	Sqm
157	82	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):	BI01010001010000000000000515BI0100001271
158	82.1	With float glass panes of 4.0 mm thickness	BI01010001010000000000000515BI0100001272	2	Sqm
159	82.2	With float glass panes of 5.50 mm thickness	BI01010001010000000000000515BI0100001273	100	Sqm
160	83	Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete.	BI01010001010000000000000515BI0100001274
161	83.1	255 x 19 mm	BI01010001010000000000000515BI0100001275	5	Nos.
162	84	Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.	BI01010001010000000000000515BI0100001276	9	Nos.
163	85	Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).	BI01010001010000000000000515BI0100001277	100	Kg
164	86	Providing and fixing sun control film of thickness 1.5mil of approved make, colour and with self adhesive to glazed windows, doors and partitions as approved and as per the directions of the Engineer-in-charge.	BI01010001010000000000000515BI0100001278	20	Sqm

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Kerala Tenders

Construction Tenders

Trenching Work Tenders

Cable Laying Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Cable Landng Stn At Te Paravur Construction Of Cable Landing Station In The First Floor Of T E Paravur Under Kli Submarine Cable Project, North Paravur-Kerala

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Cable Landng Stn At Te Paravur Construction Of Cable Landing Station In The First Floor Of T E Paravur Under Kli Submarine Cable Project, North Paravur-Kerala

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us